You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Communication<br />
address<br />
Fcode<br />
485 Link<br />
Function name Function directory name<br />
Setting range<br />
o37<br />
number number<br />
625h Communication definition 00 to 10 to 24<br />
setting<br />
Define initial communications settings of the RS<br />
option.<br />
Place of 1: Transmission rate<br />
0 to 4<br />
0: 38400bps<br />
1: 19200bps<br />
2: 9600bps<br />
3: 4800bps<br />
4: 2400bps<br />
Place of 10: Parity bit and stop bit selection<br />
0 to 2<br />
0: No parity (stop bit: 2)<br />
1: Even<br />
o38 626h UPAC (Mode) UPAC (Start/stop) 0 to 2<br />
0 : Stop UPAC<br />
1 : Start UPAC<br />
2 : Start UPAC (Initialized start)<br />
The start/stop of the UPAC option is controlled.<br />
o39 627h UPAC memory 00 to 1F<br />
When the UPAC stop is changed, a pertinent field<br />
is set.<br />
0 : Hold<br />
1 : zero clear<br />
1bit : IQ field<br />
2bit : M field<br />
3bit : RM field<br />
4bit : FM field<br />
5bit : SFM field<br />
o40 628h UPAC address 100 to 255<br />
Setting of UPAC address number in which RS-485<br />
communication is used when personal-computer<br />
accesses UPAC application. (Refer to download)<br />
You can change the setting of a function indicated by during operation.<br />
You should stop operation to change the setting of other functions.<br />
L: Lift Functions<br />
You can change the setting of a function indicated by during operation.<br />
You should stop operation to change the setting of other functions.<br />
13-22<br />
Underline indicates a factory setting.<br />
Communication<br />
Control type: Available/<br />
address<br />
Not available<br />
Fcode<br />
485 Link<br />
number number<br />
Function name Function directory name<br />
Setting range<br />
PG LES VF SM<br />
l01 901h Password data 1 0 to 9999 0 x o x o o x o o<br />
l02 902h Password data 2 0 to 9999 0 x o x o o x o o<br />
l03 903h Lift rated speed 0.0 to 100.0 to 999.9 m/min 2 o o o o o x o o<br />
l04 904h Preset S-curve<br />
(selection)<br />
Preset S-curve 0 to 2<br />
0 : Inactive<br />
<br />
1 : Method 1<br />
For VG3/VG5. accel/decel can be controlled via<br />
terminal 12 with SS1, SS2, and SS4 all OFF.<br />
2 : Method 2<br />
For VG7. zero speed is selected with SS1, SS2,<br />
80 o o o o o x o o<br />
l05 905h S-curve 1 0 to 50 % 0 o o o o o x o o<br />
l06 906h S-curve 2 0 to 50 % 0 o o o o o x o o<br />
l07 907h S-curve 3 0 to 50 % 0 o o o o o x o o<br />
l08 908h S-curve 4 0 to 50 % 0 o o o o o x o o<br />
l09 909h S-curve 5 0 to 50 % 0 o o o o o x o o<br />
l10 90Ah S-curve 6 0 to 50 % 0 o o o o o x o o<br />
l11 90Bh S-curve 7 0 to 50 % 0 o o o o o x o o<br />
l12 90Ch S-curve 8 0 to 50 % 0 o o o o o x o o<br />
l13 90Dh S-curve 9 0 to 50 % 0 o o o o o x o o<br />
l14 90Eh S-curve 10 0 to 50 % 0 o o o o o x o o<br />
l15 90Fh Setting for<br />
adjustment by<br />
manufacturer<br />
0 to 1<br />
0: Not used<br />
1: Method 1<br />
Type<br />
Type<br />
Copy<br />
Copy<br />
Save all<br />
Save all<br />
Initialization<br />
Initialization<br />
Control type: Available/<br />
Not available<br />
PG LES VF SM<br />
Lifting<br />
machine<br />
9 o o x o o o o o<br />
68 o o o o o o o o<br />
9 o o o o o o o o<br />
0 o o x o o o o o<br />
Lifting<br />
machine<br />
80 o o o o o x o o<br />
Underline indicates a factory setting.