Brochure - Toro

Specifications for Reelmaster ® 6500 & 6700-D
Engine
Model: Kubota, ® 4-cylinder
Rating: 46 hp (34.3 kW), gross
Displacement: 91.5 cu. in. (1.5 liter)
Fuel: Diesel
Cooling: Liquid
Traction Unit
Frame: All welded and formed steel, includes tie-down loops
Drive: 2WD: Hydrostatic; 4WD: hydrostatic, Toro ® 4-Matic, ®
on-demand
Wheel motors: Planetary gear assembly
Hydraulic oil capacity: 8.5 gallon (32 liter)
Fuel capacity: 15 gallon (57 liter)
Brakes: Wet triple disc and dynamic
Electrical
Battery: 12 volt, 650 cca
Alternator: 55 amp
Interlocks: Seat, reel and traction switches
Tires
Front: 29 x 14-15, tubeless, 6-ply
Rear: 20 x 10-10, tubeless, 6-ply
Ground Speed
Forward: 0-10 mph (0-16.1 km/h)
Reverse: 0-4 mph (0-6.4 km/h)
Operating Station
Steering: Power
Seat: Deluxe, adjustable suspension
Controls: Foot-operated traction and brake pedals, hand-operated
traction speed limiter, throttle, parking brake latch, ignition switch,
single joystick for cutting unit raise/lower, reel speed control knob
Gauges: Hour meter, speedometer, fuel, temperature, cluster
with glow plug, charge indicator, engine oil pressure and coolant
temperature lights, water in fuel and low water indicator, reel
control indicates if reels aren’t providing desired clip
Safety: Seatbelt, 4-post ROPS (standard on 4WD models)
Dimensions & Weight
Wheelbase: 58" (147 cm)
Length: 120" (305 cm)
Width: 6500-D: 110" (279 cm); 6700-D: 147" (374 cm)
Transport width: 84" (213 cm)
Height: 60" (152 cm); 84" (213 cm) w/ ROPS
Weight (wet): 6500-D, 2WD: 3,100 lbs. (1,407 kg); 6500-D, 4WD:
3,200 lbs. (1,453 kg); 6700-D, 4WD: 3,850 lbs. (1,748 kg)
Cutting Decks
6500-D
Type: Five 22" (56 cm) width, fully interchangeable
Construction: Welded, 7" (17.8 cm) diameter
Reel options: 5, 7 and 11-blade
Height of cut: 3 /8-1 3 /4" (9.5-44.5 mm)
Width of cut: 96" (244 cm)
Clip frequency: .375-1.25" (9.5-31.8 mm), manually adjustable
6700-D
Type: Seven 22" (56 cm) width, fully interchangeable
Construction: Welded, 7" (17.8 cm) diameter
Reel options: 5, 7 and 11-blade
Height of cut: 3 /8-1 3 /4" (9.5-44.5 mm)
Width of cut: 6500-D: 96" (244 cm); 6700-D: 133" (338 cm) with 7
cutting units, 114.5" (291 cm) with 6 cutting units, or 96" (244 cm)
with 5 cutting units
Clip frequency: .375-1.25" (9.5-31.8 mm)
Backlapping: On board, standard
Bedknife-to-reel adjust: Single point adjustment
Rear rollers: Full, 3" (7.6 cm)
Front rollers: Wiehle, ® 3" (7.6 cm)
Accessories: Armrest kit, verticutting reel, Turf Defender leak
detector kit, rear weight kit, hand held diagnostic tool, grass
basket kit, rear roller scraper kit, front roller scraper kit, powered
rear roller brush
Certification: ANSI B71.4-1999, CE certified
Warranty: Two-year limited
TORO ®
PROFESSIONAL SERVICES
Toro Financing A full service offering for all your equipment and
irrigation purchases. Flexible financing options can be tailored to
meet your operational needs.
Toro Protection Plus Extended Protection Plan Protect your
budget and your equipment investment. Plans are available for both
new and used equipment, and you can choose from various terms to
fit your financing terms.
Toro Genuine Parts Keep the productivity and performance of your
equipment at its peak. Learn about Performance Parts pricing and
MVP kits. Find replacement parts online at Toro.com/partsviewer.
Toro Training Toro Factory Service Schools are available. Explore the
training and customer care areas of Toro.com and ToroNSN.com for
readily available education and training materials.
Toro Controller Repair Provides irrigation controller boards ready
for immediate board exchange to assure that downtime is minimal
and your turf stays protected. Toro is the choice for reliability.
Toro NSN ® An industry-first support network that provides reliable,
around-the-clock irrigation central control system troubleshooting
and operation assistance. Call 1-800-ASK-TORO.
Products depicted in this brochure are for demonstration purposes only.
Actual products offered for sale may vary.
©2004 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196
Part No. XX-XXX-X. Printed in U.S.A.
Toro.com