Brochure - Toro

Reelmaster ® 6500 & 6700-D

Never
backs down.
6500-D
• 46 hp (34.3 kW) Kubota ®
turbo-diesel engine
• 96" (244 cm) cutting swath
• 2 or 4-wheel drive
6700-D
• 46 hp (34.3 kW) Kubota
turbo-diesel engine
• 96-133" (244-338 cm)
cutting swath
• 4-wheel drive
High altitudes. Warm season grasses. Hilly terrain.
Whatever challenge your course presents, you can count
on the Toro ® Reelmaster ® 6500-D and 6700-D to handle
the job. The legendary
Toro cutting units assure
a quality cut while the
durable design and
rugged components
preserve its longterm
value.
Count on
Innovation
No more clumping.
Keep your fairways in top condition by adding powered rear
roller brushes. These patented brushes sweep the rear rollers
while mowing to eliminate clumps and disperse grass clippings
evenly in wet conditions. They’re easy to install and keep
fairways looking great without labor-intensive cleanup.

No challenge
too great.
The Reelmaster 6500-D and 6700-D are specially
engineered to perform in challenging climates with
warm-season grasses or hilly terrain and high elevations.
A dependable engine is a must in these conditions,
which is exactly what you get with the 46 hp (34.3 kW)
Kubota 4-cylinder, turbo-diesel engine. It’s the most
powerful engine in its class and you can count on it
for years of dependable service. 4-wheel drive comes
standard in the 6700-D and is available in the 6500-D.
The planetary gear wheel-drive system allows
traction system hydraulics to run more efficiently
and with less heat buildup. Wet, triple-disc brakes
work with the planetary assemblies for safer
transport between fairways.

Right for the job.
With seven cutting units and a 133" (338 cm) cutting
swath, the 6700-D maximizes your productivity and
reduces labor costs. All Reelmaster 6000 series mowers
include onboard backlapping to maintain a superior cut.
Manually adjustable reel speed gives the operator
the ability to adjust to a variety of turf condition. No
fairway mowers do a better job of adjusting to changes
in the seasons than the Reelmaster 6500-D and 6700-D.

The legend continues.
Legendary cutting units have made
Toro ® Reelmasters ® the most soughtafter
fairway mowers for years. Their
impeccable cut and versatility are
unmatched in the industry. Every
cutting unit is interchangeable and
comes with a 5, 7 or 11-blade reel to
best match your mowing conditions.
• Single Point Adjustment The
exclusive Toro bedknife-to-reel
adjustment system allows for quick
servicing and adjustments.
• Front Rollers Large, deep-grooved
Wiehle ® rollers are machined
smooth they clippings don’t collect.
• Grass Deflectors Multiple grass
deflectors disperse grass clippings
more effectively.
• Standard Weight Transfer
Dynamically balance the cutting
unit for optimum performance in
a wide range of conditions.
The 6500-D five-plex configuration provides
a 96" (244 cm) width of cut.
Raise or lower the wing reels on the 6700-D independently to
adjust your cutting swath from 96-133" (244-338 cm).

Highly intuitive.
Your operators will master the Reelmaster ® 6500-D or
6700-D in no time. The joystick control for the cutting
units is incredibly easy to learn and all controls are
very accessible for improved operator control. A single
forward/reverse pedal includes traction speed control
to make mowing almost effortless. We also took steps
to keep the operator comfortable by including a deluxe
adjustable seat, a cup holder and a large storage area
behind the seat.
Mechanics have quick access to every component
and preventative maintenance items are located on
the same side of the engine for easy service.

Accessories
Get more from your Reelmaster 6000 series mower by adding these accessories:
Power rear roller brush Verticutting reel Handheld diagnostic tool
Comb kit, scrapers, rollers
Bedknives
Also available:
• Turf Defender leak detector
• Armrest kit
• Grass basket kit

Specifications for Reelmaster ® 6500 & 6700-D
Engine
Model: Kubota, ® 4-cylinder
Rating: 46 hp (34.3 kW), gross
Displacement: 91.5 cu. in. (1.5 liter)
Fuel: Diesel
Cooling: Liquid
Traction Unit
Frame: All welded and formed steel, includes tie-down loops
Drive: 2WD: Hydrostatic; 4WD: hydrostatic, Toro ® 4-Matic, ®
on-demand
Wheel motors: Planetary gear assembly
Hydraulic oil capacity: 8.5 gallon (32 liter)
Fuel capacity: 15 gallon (57 liter)
Brakes: Wet triple disc and dynamic
Electrical
Battery: 12 volt, 650 cca
Alternator: 55 amp
Interlocks: Seat, reel and traction switches
Tires
Front: 29 x 14-15, tubeless, 6-ply
Rear: 20 x 10-10, tubeless, 6-ply
Ground Speed
Forward: 0-10 mph (0-16.1 km/h)
Reverse: 0-4 mph (0-6.4 km/h)
Operating Station
Steering: Power
Seat: Deluxe, adjustable suspension
Controls: Foot-operated traction and brake pedals, hand-operated
traction speed limiter, throttle, parking brake latch, ignition switch,
single joystick for cutting unit raise/lower, reel speed control knob
Gauges: Hour meter, speedometer, fuel, temperature, cluster
with glow plug, charge indicator, engine oil pressure and coolant
temperature lights, water in fuel and low water indicator, reel
control indicates if reels aren’t providing desired clip
Safety: Seatbelt, 4-post ROPS (standard on 4WD models)
Dimensions & Weight
Wheelbase: 58" (147 cm)
Length: 120" (305 cm)
Width: 6500-D: 110" (279 cm); 6700-D: 147" (374 cm)
Transport width: 84" (213 cm)
Height: 60" (152 cm); 84" (213 cm) w/ ROPS
Weight (wet): 6500-D, 2WD: 3,100 lbs. (1,407 kg); 6500-D, 4WD:
3,200 lbs. (1,453 kg); 6700-D, 4WD: 3,850 lbs. (1,748 kg)
Cutting Decks
6500-D
Type: Five 22" (56 cm) width, fully interchangeable
Construction: Welded, 7" (17.8 cm) diameter
Reel options: 5, 7 and 11-blade
Height of cut: 3 /8-1 3 /4" (9.5-44.5 mm)
Width of cut: 96" (244 cm)
Clip frequency: .375-1.25" (9.5-31.8 mm), manually adjustable
6700-D
Type: Seven 22" (56 cm) width, fully interchangeable
Construction: Welded, 7" (17.8 cm) diameter
Reel options: 5, 7 and 11-blade
Height of cut: 3 /8-1 3 /4" (9.5-44.5 mm)
Width of cut: 6500-D: 96" (244 cm); 6700-D: 133" (338 cm) with 7
cutting units, 114.5" (291 cm) with 6 cutting units, or 96" (244 cm)
with 5 cutting units
Clip frequency: .375-1.25" (9.5-31.8 mm)
Backlapping: On board, standard
Bedknife-to-reel adjust: Single point adjustment
Rear rollers: Full, 3" (7.6 cm)
Front rollers: Wiehle, ® 3" (7.6 cm)
Accessories: Armrest kit, verticutting reel, Turf Defender leak
detector kit, rear weight kit, hand held diagnostic tool, grass
basket kit, rear roller scraper kit, front roller scraper kit, powered
rear roller brush
Certification: ANSI B71.4-1999, CE certified
Warranty: Two-year limited
TORO ®
PROFESSIONAL SERVICES
Toro Financing A full service offering for all your equipment and
irrigation purchases. Flexible financing options can be tailored to
meet your operational needs.
Toro Protection Plus Extended Protection Plan Protect your
budget and your equipment investment. Plans are available for both
new and used equipment, and you can choose from various terms to
fit your financing terms.
Toro Genuine Parts Keep the productivity and performance of your
equipment at its peak. Learn about Performance Parts pricing and
MVP kits. Find replacement parts online at Toro.com/partsviewer.
Toro Training Toro Factory Service Schools are available. Explore the
training and customer care areas of Toro.com and ToroNSN.com for
readily available education and training materials.
Toro Controller Repair Provides irrigation controller boards ready
for immediate board exchange to assure that downtime is minimal
and your turf stays protected. Toro is the choice for reliability.
Toro NSN ® An industry-first support network that provides reliable,
around-the-clock irrigation central control system troubleshooting
and operation assistance. Call 1-800-ASK-TORO.
Products depicted in this brochure are for demonstration purposes only.
Actual products offered for sale may vary.
©2004 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196
Part No. XX-XXX-X. Printed in U.S.A.
Toro.com