Door Knob Hanger - Embroidery Library

More documents

Recommendations

Info

Door Knob Hanger Print the "DL" file from your embroidery software. This is a "template" that we'll use to cut the fabric to the shape to make the hanger. If you don't have embroidery software to print a template, then you can make a template by embroidering the dieline file onto a piece of paper. Hoop two pieces of paper. Load the "_DL" file to your machine, and embroider right onto the paper. Then, unhoop the paper and cut on the sewn line. You'll have two templates. 2 file:///F|/source/ELProjects/html/PR1163.html (2 of 8) [6/10/2011 3:42:00 PM]
Door Knob Hanger Spray a piece of medium-weight cutaway stabilizer with a bit of temporary adhesive. Place the fabric for the front of your hanger on top of the stabilizer, and smooth it flat. Place the paper template on top of the fabric and stabilizer. 3 file:///F|/source/ELProjects/html/PR1163.html (3 of 8) [6/10/2011 3:42:00 PM]
Page 1: Door Knob Hanger Door Hangers Welco
Page 5 and 6: Door Knob Hanger Load the full embr
Page 7 and 8: Door Knob Hanger Attach the hoop to

Door Knob Hanger - Embroidery Library

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?