Aptica Plus B - Dental2000.It

Aptica Plus B
...the most advanced device for handpiece sterilization
Adaptive Heat
This is the innovative heating system
designed by Dental X to accelerate the
sterilization cycles and reduce consumption.
This exclusive system eliminates thermal
stress and allows safer sterilization
of the turbines and handpieces
without the risk of early deterioration.
The Adaptive Heat heating system
takes advantage of the conductive
properties of the copper used to build
the chamber. Thanks to the high conduction
of the copper, a new-generation
active heating element system
has been designed which heats the
chamber in a differentiated manner
based on the thermal flow of the steam
and the different phases of the cycle.
This allows the elimination of thermal
stress and acceleration of the heating
phases without resorting to electronic
devices, steam injection or compromising
the reliability of the heating elements
themselves.
The copper - multiple heating element
combination enables faster cycles with
homogenous distribution of the steam
while keeping the peak temperatures
of the heating elements and surface
temperatures of the chamber equal to
the sterilization temperature, thus safeguarding
the long-term service life of
the heating elements and the reliability
of the system as a whole.
Active Steam Injection System
This is a new technology that allows
the water to be heated before entering
the chamber using the thermal energy
of the primary heating elements.
Unlike steam generators, the Active
Steam Injection System does not require
additional energy and is definitely
more reliable.
Warm-up System
During the depressurization phase, the
water in the tank is pre-heated by recovering
the thermal energy of the
steam.
This technique achieves faster cycles
without increasing power consumption.
Furthermore the warm up helps
to degas the water and speed up the
vacuum phases.