XLogic SuperAnalogue Channel Owner's Manual - Solid State Logic
XLogic SuperAnalogue Channel Owner's Manual - Solid State Logic
XLogic SuperAnalogue Channel Owner's Manual - Solid State Logic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Appendix<br />
<strong>Channel</strong> Instrument Input<br />
Signal applied to <strong>Channel</strong> Instrument Input and measured at Output. Pad switched out and Input Gain control<br />
set to +6dB.<br />
Gain<br />
Variable from +6dB to +72dB in 6dB steps<br />
Independently switchable 18dB Pad<br />
Input Impedance<br />
1MΩ<br />
Output Headroom<br />
> +26dBu at onset of clipping<br />
THD + Noise<br />
< 0.003% at 1kHz<br />
(-10dBu applied, +30dB gain) < 0.005% at 10kHz<br />
Frequency Response<br />
+0.05dB/-0.1dB from 20Hz to 20kHz<br />
–3dB at 200kHz<br />
Equivalent Input Noise < –70dBu at +40dB gain<br />
(Input terminated with 150Ω) < –89dBu at +20dB gain<br />
<strong>Channel</strong> Output<br />
Output is fully balanced and floating, and incorporates SSL’s cable compensating output design, allowing it to<br />
drive long cable runs without degrading the frequency response.<br />
Gain<br />
Continuously variable from -20dB to +20dB with indent at 0dB position<br />
Output Impedance:<br />
< 40Ω<br />
Page 17
Change language