Untitled

เอกสารอ้างอิง
1. Ramu, K. Switched Reluctance Motor Drives : Modeling, Simulation, Analysis,
Design and Applications. United State of Kingdom : CRC Press, c2001.
2. Change, L. “Modeling of Switched Reluctance Motors.” IEEE Canadian Conference
on Electrical and Computer Engineering. 2 (May 1997) : 866-869.
3. Zhou, H., Ding, W. and Yu, Z. “A Nonlinear Model for the Switched Reluctance
Motor.” International Conference on Electrical Machines and Systems. 1
(September 2005) : 568-571.
4. Dragu, C. S. and Belmans, R. “Measurement of Magnetic Characteristics of Switched
Reluctance Motor.” European Conference on Power Electronics and
Applications. (September 2003).
5. Parreira, B., et al. “Obtain the Magnetic Characteristic of an 8/6 Switched Reluctance
Machine : From FEM Analysis to the Experimental Tests.” IEEE Transaction on
Industrial Electronics. 52 (December 2005) : 1635-1642.
6. Rasmeni, S., et al. “Finite Element Based Simulation of the Current Waveform of the
Switched Reluctance Machine.” IEEE Africon Conference in Africa. 2
(October 2002) : 681-683.
7. Lee, J. W., et al. “New Rotor Shape Design for Minimum Torque Ripple of SRM
Using FEM.” IEEE Transaction on Magnetics. 40 (March 2004) : 754-757.
8. Garip, M., Ozoglu, Y. and Mese, E. “An Approach to Torque Ripple Reduction in
Fully Pitched Switched Reluctance Motors by Pole Tip Shaping.” IEEE
Mediterranean on Electrotechnical Conference. (May 2002) : 157-161.
9. Ye, Z. Z., Martin, T. W. and Balda, J. C. “Maximization of Starting Torque of A 10/8
SRM with Short Flux Path Based on Numerical Analysis and Calculation.”
Annual Conference of the IEEE on Industrial Electronic Society. 1 (October
2000) : 362-368.
10. Cui, Y. L., et al. “The Simulation Study for Switched Reluctance Motor Drives Based
on Matlab 6.5.” International Conference on Machine Learning and Cybernetics.
2 (August 2005) : 1076-1081.