You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Think of the Possibilities<br />
Follow these 4 steps to your ideal viscometer:<br />
Step 1: Choose your parameters<br />
Viscosity, relative viscosity,<br />
runtime, intrinsic viscosity<br />
<strong>Lovis</strong> <strong>2000</strong> M<br />
Dynamic and kinematic viscosity<br />
+ density + concentration<br />
<strong>Lovis</strong> <strong>2000</strong> <strong>ME</strong> +<br />
DMA 4100/4500/5000 M<br />
Dynamic and kinematic viscosity<br />
+ density + sound velocity<br />
<strong>Lovis</strong> <strong>2000</strong> <strong>ME</strong> +<br />
DSA 5000 M<br />
Step 2: Select the correct capillaries and balls<br />
0.3 mPa.s to 15 mPa.s<br />
Capillary 1.59 mm and ball 1.5 mm<br />
10 mPa.s to 300 mPa.s<br />
Capillary 1.80 mm and ball 1.5 mm<br />
100 mPa.s to 10,000 mPa.s<br />
Capillary 2.50 mm and ball 1.5 mm<br />
Step 3: Decide how you want to fill sample<br />
Automatic sample filling and handling No. of samples Manual sample handling<br />
Xsample 22 Sample Filling Unit<br />
Xsample 122 Sample Filling Unit<br />
Xsample 52 Sample Handling Unit<br />
Xsample 352 Filling and Rinsing Unit<br />
Xsample 452 Filling and Rinsing Unit<br />
1<br />
24/48<br />
1<br />
1<br />
24/48/96<br />
Syringe method<br />
for standard and low-volume applications<br />
starting from 400 µL<br />
Step 4: Define the chemical resistance<br />
Standard<br />
The standard quality for wetted parts is stainless steel<br />
balls and Viton ® Extreme O-rings (if combined with<br />
Xsample 22/122 a silicon hose and a stainless steel<br />
needle are used).<br />
Upgrade<br />
To measure corrosive substances, choose the<br />
upgrade to gold-coated stainless steel balls and<br />
Kalrez ® O-rings (if combined with Xsample 22/122<br />
a Norprene ® chemical hose and a hastelloy needle<br />
are used).
Change language