2012 International DOLPHIN 81 Class Rules - Swiss Dolphin 81 ...
2012 International DOLPHIN 81 Class Rules - Swiss Dolphin 81 ...
2012 International DOLPHIN 81 Class Rules - Swiss Dolphin 81 ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
F.7.6<br />
(ii)<br />
(iii)<br />
(iv)<br />
(v)<br />
(vi)<br />
FITTINGS<br />
(a) Mandatory<br />
(i)<br />
(ii)<br />
(iii)<br />
(iv)<br />
(b) Optional<br />
(i)<br />
(ii)<br />
Lower and upper shrouds of...... minimum diameter of 4 mm<br />
Intermediate shrouds of .......... minimum diameter of 2.5 mm<br />
A backstay of …....................... minimum diameter of 2.5 mm<br />
Runners of ............................ minimum diameter of 3.0 mm<br />
Jumpers of ............................. minimum diameter of 2.5 mm<br />
Forestay rigging link<br />
Shroud rigging screw<br />
Backstay<br />
Runners<br />
Double grooved forestay profile.<br />
Jib/Genoa furler may be installed and used. Jib/Genoa furler<br />
gear including controlling lines may be installed over or under<br />
deck.<br />
(c) Prohibited for use<br />
(i) -<br />
F.7.7<br />
DIMENSIONS<br />
Forestay length of … ........................................................ max 9240 mm<br />
F.8 RUNNING RIGGING<br />
F.8.1 MEASUREMENT<br />
The running rigging shall comply with the current class rules.<br />
F.8.2 CERTIFICATION<br />
Certification is not required.<br />
F.8.3 MANUFACTURER<br />
(a) Manufacturer is optional.<br />
F.8.4 MATERIALS<br />
(a) It is not allowed to use any carbon fiber or kevlar<br />
F.8.5 CONSTRUCTION<br />
(a) Mandatory<br />
(i) Mainsail halyard<br />
(ii) Mainsail sheet<br />
(iii) Kicking strap<br />
03.05.12 24 <strong>International</strong> <strong>Dolphin</strong> <strong>81</strong> <strong>Class</strong> <strong>Rules</strong>