MBU-12/P Oxygen Mask - Transaero Inc.
MBU-12/P Oxygen Mask - Transaero Inc.
MBU-12/P Oxygen Mask - Transaero Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>MBU</strong>-<strong>12</strong>/P <strong>Oxygen</strong> <strong>Mask</strong><br />
The <strong>MBU</strong>-<strong>12</strong>/P meets or exceeds the requirements<br />
of U.S. Air Force Specification MIL-M-87163.<br />
The <strong>MBU</strong>-<strong>12</strong>/P mask is designed to replace the<br />
<strong>MBU</strong>-5/P and offers substantial improvement in<br />
comfort and efficiency when compared to the older<br />
mask. The <strong>MBU</strong>-<strong>12</strong>/P features a gray silicone rubber<br />
faceseal integrally bonded to a high strength gray<br />
polysulfone plastic hardshell.<br />
The shape of the <strong>MBU</strong>-<strong>12</strong>/P mask provides excellent<br />
downward vision. The low profile design brings the<br />
mask close to the face and provides excellent stability<br />
during high G maneuvers. Anti-roll webs at the nose<br />
seal prevent downward roll off. The inherent rigidity<br />
of the integral faceseal/hardshell allows adjustment<br />
to provide superior sealing during pressure breathing.<br />
Four mask sizes are available to assure proper fit and<br />
comfort.<br />
The unique design of the Gentex developed<br />
combination breathing valve distinguishes the<br />
Gentex Model of the <strong>MBU</strong>-<strong>12</strong>/P. Using concepts<br />
developed during the space program, this valve offers<br />
greatly reduced exhalation resistance during pressure<br />
breathing. Additionally, the rolling diaphragm reduce<br />
the potential for valve sticking caused by residue<br />
accumulation. The combination valve meets or<br />
exceed all performance requirements of MIL-V-27296.<br />
FSC# 27541<br />
<strong>Transaero</strong>, inc.<br />
35 Melville Park Road, Suite 100<br />
Melville, NY, USA 11747<br />
T 631.752.<strong>12</strong>40 F 631.752.<strong>12</strong>42<br />
transaeroinc.com<br />
<strong>12</strong>/09
Standard configuration<br />
Weight<br />
The weight of each size does not exceed 17.64 ounces<br />
(0.5 kg) when the mask assembly includes all major<br />
components listed in MIL-M-87163.<br />
Hardshell/Facepiece<br />
Consists of a gray silicone rubber faceseal bonded<br />
to a gray polysulfone hardshell.<br />
Combination Valve<br />
Pressure compensation combination inhalation/exhalation<br />
type valve with silicone elastomers.<br />
Hose Assembly<br />
Convoluted silicone rubber hose with 3/4 inch internal<br />
diameter.<br />
3-Pin Bayonet Hose Connector<br />
Standard MS27796 type three pin locking bayonet hose<br />
connector designed to mate with CRU-60/P or similar<br />
connectors.<br />
Offset Bayonet Connectors<br />
Double eyelet, oxygen mask connector conforming<br />
to Gentex Drawing No. 78B3595.<br />
Communications Cord and Plug<br />
CX-4707C/AIC cord terminal at branched (mask) end<br />
with U-173/U connectors and with U-174/U plug at the<br />
aircraft interface end.<br />
Microphone (Standard USAF <strong>Mask</strong>)<br />
Military Type M-101/AIC noise cancelling dynamic<br />
microphone with 7 ohms impedance (+2 ohms)<br />
and a frequency response of 400-5000 Hz.<br />
Accessories and options<br />
AM-7067A Audio Amplifier<br />
A carbon compatible audio frequency preamplifier<br />
to permit use of dynamic mask microphone with<br />
carbon-type radio systems. Suitable for use with the<br />
<strong>MBU</strong>-<strong>12</strong>/P oxygen mask subassembly to interface with<br />
an M-94B/A or M-101/AIC dynamic microphone with the<br />
US Navy intercommunications system. The amplifier is in<br />
accordance with MIL-M-23595 and in general accordance<br />
with 765AS287.<br />
Gentex carries all of the necessary tools to support<br />
maintenance of the <strong>MBU</strong>-<strong>12</strong>/P oxygen mask. Each<br />
is available for individual purchase.<br />
Performance<br />
Tear Resistance<br />
The silicone rubber used in the manufacture of the<br />
<strong>MBU</strong>-<strong>12</strong>/P has a minimum tear resistance of 26269<br />
newtons per meter (150 pounds per inch).<br />
Toxicity<br />
The silicone rubber used in the mask assembly does<br />
not contain any chemicals or materials that have toxic<br />
properties.<br />
Dielectric Strength<br />
The microphone connector withstands without flashover<br />
or breakdown, the application of a 250-volt alternating<br />
potential of commercial line frequency.<br />
Combination Valve<br />
Meets or exceeds the requirements of MIL-V-27296.<br />
Superior exhalation resistance compared to requirements<br />
as follows:<br />
Product information<br />
P/N NSN Size<br />
G0<strong>12</strong>-1001-01 1660-01-140-9399 Short<br />
G0<strong>12</strong>-1001-02 1660-01-140-9400 Regular<br />
G0<strong>12</strong>-1001-03 1660-01-140-9401 Long<br />
G0<strong>12</strong>-1001-04 1660-01-140-9402 X-Long<br />
Test Specification Gentex valve<br />
requirements (max) performance (average*)<br />
Exhalation Resistance<br />
@ 50 LPM<br />
pressure demand 1.50 inches H20 .97 inches H20<br />
@ 50 LPM<br />
pressure demand 1.50 inches H20 .68 inches H20<br />
@ 100 LPM<br />
pressure demand 2.60 inches H20 1.18 inches H20<br />
*Valves shown are average of laboratory tests and are for comparison only.<br />
631.752.<strong>12</strong>40<br />
transaeroinc.com