10.07.2015 Views

MX-10160A Electro-Optical Systems Image Intensifier - Transaero Inc.

MX-10160A Electro-Optical Systems Image Intensifier - Transaero Inc.

MX-10160A Electro-Optical Systems Image Intensifier - Transaero Inc.

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>MX</strong>-<strong>10160A</strong> <strong>Electro</strong>-<strong>Optical</strong> <strong>Systems</strong> <strong>Image</strong> <strong>Intensifier</strong>(1250 FOM) 18mm, Gen IIIThe <strong>MX</strong>-<strong>10160A</strong> <strong>Image</strong> <strong>Intensifier</strong> Tubes aredesigned for use in all night vision systems thatuse an inverting tube, such as aviator goggles,ground systems and weapon sights. Typicallyit is used in the L-3 M949 Aviator Goggle systembut can also be used in other systems needinginverted images.The <strong>MX</strong>-<strong>10160A</strong> Gen III 18-mm image intensifieris completely self-contained with an integral highvoltagepower supply. Equipped with automaticbrightness control (ABC), this power supplyprovides constant output image brightness aslight levels increase. It also provides bright-sourceprotection to guard the tube against exposureto high levels of light.These Gen III image intensifier tubes consist ofa high-efficiency GaAs photocathode bonded toa glass input window, a microchannel plate (MCP),and a P-43 phosphor screen deposited on aninverted output window.The Gen III photocathode is very sensitive tolow-resolution levels of visible and near infraredlight. It also provides very high signal-to-noiseratio for extended detection ranges in low-lightconditions.FSC# 27541<strong>Transaero</strong>, inc.35 Melville Park Road, Suite 100Melville, NY, USA 11747T 631.752.1240 F 631.752.1242transaeroinc.com6/09


1.448 MAX1.225 MAXMaximum Spots Allowed in Each ZoneZone 10.22 DiaZone 20.58 DiaZone 30.71 DiaSpot Size (in.)>.009.006 - .009.003 - .006Zones1 2 30 0 00 1 10 2 2AnodeBright SpotsPerformance parametersSpecificationsPhysical parametersInput Current mA (max) 35-40Resolution Ip/mm (min)64LP (min)Resolution Highlight Ip/mm @20fc (min) 12Photocathode Sensitivity 2856 o K, UA/Im (min) 1,500 (min)@830 nm, mA/W (min) 190@880 nm, mA/W (min) 80Signal to Noise Ratio18:1 (min)EBI @2x10 -11 Im/cm 2 2.5Luminous Gain fl/fc @2x10 -6 fc 40K-70KOutput Brightness fl/fc @1 and 20 fc 2.0-4.0Halo mm1.25Ion BarrierOutput Brightness Uniformity @2856 o K 3:1MTF (Minimum) % @15.0 Ip/mm 61@25.0 Ip/mm 38Photocathode Diameter mm (min) 17.5Reliability Standard Hrs (min) 10,000PhosphorP43Screen Quality**Input Optic: GlassCathode Type: Gallium Arsenide<strong>Image</strong> Output: InvertingWeight grams: 98Export of the commodities described herein is strictly prohibited without a valid exportlicense issued by the U.S. Department of State, Office of Defense Trade Controls,prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Codeof Federal Regulations, Parts 120-130.631.752.1240transaeroinc.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!