MDTFSL3X001_D_Dialight Street Light - Lincis
MDTFSL3X001_D_Dialight Street Light - Lincis
MDTFSL3X001_D_Dialight Street Light - Lincis
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.8<br />
(122)<br />
<strong>Street</strong>Sense Series<br />
LED <strong>Street</strong> <strong>Light</strong><br />
34.7 (880) 180W<br />
26.5 (674) 120W<br />
18.4 (467) 60W<br />
Mechanical Information<br />
Fixture Weight:<br />
EPA (Sq. ft):<br />
Mounting:<br />
Electrical specifications<br />
Operating Voltage:<br />
16lbs (60W)<br />
25lbs (120W)<br />
34lbs (180W)<br />
0.60 (60W)<br />
0.87 (120W)<br />
1.13 (180W)<br />
Accommodates 1.25”(1.66” OD) - 2” IP<br />
(2.375” OD) pipe. Provision for adjustment of +/-<br />
5° in 2.5° increments<br />
Universal inputs<br />
100-277VAC, 50/60Hz<br />
347-480VAC 50/60Hz<br />
14.7<br />
(372)<br />
Total System<br />
Power Consumption: See ordering info on pg. 4<br />
LED Drive Current:<br />
350mA<br />
Operating Temp 1 :<br />
-40°F to 165°F (-40°C to 74°C) ambient<br />
Certifications and Ratings:<br />
• UL1598 (Suitable for Wet Locations)<br />
• CSA C22.2 No. 250.0-08<br />
• IDA Dark Sky<br />
• ANSI 1012<br />
• UL8750<br />
Compliances:<br />
• RP-8-00 (R2005)<br />
• IEC 60529 (IP 66)<br />
• ANSI C 136.15-2011<br />
Test Reports:<br />
• LM-79 ( pending for IES types IV and V)<br />
• LM-80<br />
Accessories (ordered separately):<br />
• Photo Controller - part number - SLPC01R<br />
• Intelligent street light (consult factory)<br />
• ANSI Label (consult factory)<br />
Dimensions in inches (mm)<br />
Terminal Block:<br />
Noise Requirements /<br />
EMC:<br />
Transient Protection:<br />
THD:<br />
Power Factor: >0.90<br />
Material<br />
Housing:<br />
#14 AWG to #6 AWG wire and accessible<br />
via hinged tool less entry<br />
FCC Title 47, Subpart B, Section 15, class A<br />
device. RF Immunity; 10V/m, 80MHz-1GHz<br />
Open circuit surge protection 6kV standard per<br />
ANSI/IEEE C62.41. 2.2002 cat C low<br />
10kV option consult factory<br />