Wilo TOP-D - ConSoft
Wilo TOP-D - ConSoft
Wilo TOP-D - ConSoft
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Series description: <strong>Wilo</strong>-<strong>TOP</strong>-D<br />
Design<br />
Glandless circulation pump with screwed connection or flange<br />
connection.<br />
Application<br />
Hot-water heating systems of all kinds, air-conditioning systems,<br />
closed cooling circuits, industrial circulation systems<br />
Type key<br />
Example: <strong>Wilo</strong>-<strong>TOP</strong>-D 40<br />
<strong>TOP</strong>-D<br />
Standard pump (screw-end pump or flange-end<br />
pump)<br />
40 Nominal connection diameter<br />
Special features/product benefits<br />
• For installations with low pipework resistances, can be used in<br />
heating systems and in cooling/air-conditioning systems from<br />
-20 °C to +130 °C<br />
• Universal application for various mains operations:<br />
• 3~400/230 V, 1~230 V with use of a capacitor (accessory)<br />
• Pump housing with cataphoretic coating for the prevention of<br />
corrosion by condensation formation<br />
• Simple installation due to combination flange PN 6/PN 10 (for<br />
DN 40 to DN 65)<br />
Technical data<br />
• Permitted temperature range -20 °C to +130 °C, for short<br />
periods (2 h) to +140 °C<br />
• Mains connection:<br />
• 1~230 V, 50 Hz (with capacitor)<br />
• 3~230 V, 50 Hz<br />
• 3~400 V, 50 Hz<br />
• Protection class IP X4D<br />
• Screwed connection or flange connection (depending on type)<br />
Rp 1¼ to DN 125<br />
• Max. operating pressure, standard version: 6/10 bar or 6 bar<br />
(special version: 10 bar or 16 bar)
Equipment/function<br />
Manual functions<br />
• Setting of the speed stages: 1 speed stage<br />
Signal and display functions<br />
• Thermal winding contact (WSK, potential-free NC contact) for<br />
<strong>TOP</strong>-D 65 to <strong>TOP</strong>-D 125<br />
• Direction-of-rotation control light<br />
Equipment<br />
• In flange pumps: Flange versions<br />
• Standard version for pumps DN 40 to DN 65: Combination<br />
flange PN 6/10 (flange PN 16 acc. to EN 1092-2) for<br />
counter flanges PN 6 and PN 16,<br />
• Standard version for pumps DN 80 to DN 125: Flange PN 6<br />
(configured for PN 16 acc. to EN 1092-2) for counter flange<br />
PN 6,<br />
• Special version for pumps DN 65 to DN 125: Flange PN 16<br />
(acc. to EN 1092-2) for counter flange PN 16,<br />
• Cable inlet possible on both sides with <strong>TOP</strong>-D 65 to <strong>TOP</strong>-D 125<br />
• Blocking current-proof motor (only for <strong>TOP</strong>-D 30, 40, 50)<br />
• Standard thermal insulation for heating applications<br />
Materials<br />
• Pump housing: Grey cast iron<br />
• Impeller: Plastic<br />
• Shaft: stainless steel<br />
• Bearing: Carbon, metal impregnated<br />
Scope of delivery<br />
• Pump<br />
• Thermal insulation<br />
• Including seals for threaded connection<br />
• Washers for flange screws (for nominal connection diameters<br />
DN 40 - DN 65)<br />
• Installation and operating instructions<br />
Options<br />
• Versions for special voltages on request<br />
• Special version for operating pressure PN 16 (at additional<br />
charge)
Accessories<br />
• Screwed connection for threaded connection<br />
• Adapter fittings<br />
• Condenser for AC current operation 1~230 V<br />
• <strong>Wilo</strong>-SK-C2 condenser switchbox<br />
• <strong>Wilo</strong>-SK 602 tripping unit
Change language