MUNICIPAL CORPORATION JALANDHAR

DATA SHEET
16
The following technical details shall be furnished in the Technical Bid.
(A) PRIME MOVER:
(i) Name of Manufacturer (Back-up Guarantee of Manufacturer to be furnished.)
(ii) PTO Gear Ratio.
(a) Output
(b) Input
(iii) H.P. Available at end of P.T.O. at R.P.M.
(iv) Throughput torque KGM.
(v) No. of output (auxiliary).
(B) TANK:
i) Capacity in M3.
(ii) Thickness of wall in mm.
(iii) Material of Tank
(vi) Level Indicator Size
(vii) Material of Drain/Suction Valve.
(C) HIGH PRESSURE JETTING PUMP
(i) Make & Model (Back-up Guarantee of Manufacturer to be furnished)
(ii) Pressure Developed in bar
(iii) Discharge in L.P.M.
(iv) Material of Plunger