FLAIL MOWERS - MULCHERS - SaMASZ Sp. z oo

TYPES OF FLAIL KNIVES
STANDARD
~ 1kg
FLAIL MOWERS
GENERAL DATA
TYPE I Flail knives are heavy (1kg) and
durable. The most frequently used type
TABLE OF CONTENTS:
FLAIL MOWERS
GENERAL DATA
p. 3
of flails in Poland.
OPTION
The SaMASZ company offers a very wide variety of flail mowers.
This includes rear, front and side type with tilt adjustment as well as arm-type machines.
KB - REAR AND FRONT
MIDDLE CLASS
p. 4 - 5
TYPE III Knives - designed
for mulching trees
and shrubs.
Flail Mowers - Mulchers are designed for works related
to maintenance of municipal infrastructure,
urban greenery and orchards. Machines of this
wing road shoulders, ditches, as well as slopes and
counter-slopes. Mulchers are designed for mowing
grass, shredding it into pieces and then spreading
KB - REAR AND FRONT
HEAVY DUTY
p. 6 - 7
TYPE IV Knives - designed
for mowing grass,
hay, corn stalks, tobacco
and for gleaning.
type are used for mowing grass, shrubs, bushes
(up to 10 cm) and cutting weeds on uncultivated
areas to leave windrows. Particularly useful in mo
the material all over the mowed area. This enables
obtaining a natural windrow, mineralisation of
floral remains and re-introducing them to the soil.
KBK - REAR (WITH p. 8
DAMPER)
AGRICULTURAL HEAVY DUTY
KBR - REAR AND SIDE
MIDDLE CLASS
KBRP - REAR SIDE ON
PANTOGRAPH
HEAVY DUTY
KWT - EXTENSION ARM
REAR + EQUIPMENT
p. 9
p. 10 - 11
p. 12 - 13
KNIVES APPLIED IN LAMA
STANDARD
Steel sheet knives
These knives are well proven in mowing
well-maintained road shoulders, feature
high wear strength, owing to application
of hardened steel, and their low overall
weight leaves cutterbar bearings minimally
loaded and in result head overall
durability is improved.
0. 14 kg
LIGHT CLASS -„LAMA”
MIDDLE CLASS
FLAIL MOWERS - MULCHERS
ϕ 168
ϕ 133
ϕ 108
1. Drive shaft with diameter - ϕ 108 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 133 mm
4. Fair operating conditions
HEAVY DUTY
ϕ 168
ϕ 168
CAMEL 900
EXTENSION ARM
REAR + EQUIPMENT
KOLIBER 400
EXTENSION ARM
REAR + EQUIPMENT
MOWING HEADS
Lama and KW
p. 14 - 15
p. 16 - 17
p. 18
OPTION
„Mini-hammer” knives
Thanks to their bigger weight and
strenghtened construction these knives
are well proven in mowing neglected
road shoulders, are resistant to stones,
andthanks to application of hardened
steel they last longer.
Both knife types are installed in special
holders, thanks to which forces transmitted
onto flail-bar are lower if potentially
hit by a stone, therefore durability of bar
bearings and the whole machine is improved.
1. Drive shaft with diameter - ϕ 133 mm
2. Mulching shrubs and bushes (up to ϕ 8 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Fairly difficult operating conditions
ϕ 133
1. Drive shaft with increased diameter -
ϕ 168 mm
2. Mulching shrubs and bushes (up to ϕ 10 cm)
3. Ground following bar with diameter - ϕ 168 mm
4. Very difficult operating conditions
5. Sliding skids and internal cover made of Hardox
steel
6. Bars resistant to deflections
OPERATING FITTINGS
p. 19
0.3 kg
7. Higher durability of thick-walled drive shaft and
ground folowing bar
2 3