DBI CATALOG

OUR RANGE OF 

DECORATIVE TREATMENTS 

ON FLAT GLASS 

www.dbi-sa.be

GLASS 

DECORATIVE 

TECHNICS DBI 

CRISTAL I, II/III & IV 

ACIDS BY DBI 

Soft and sensual, traditional acids 

add warmth to glass, providing 

sparkle for your exclusive projects. 

Three shades for a unique finish. 

CRISTALI, velvety soft. 

CRISTALII/III, sensuality of satin. 

CRISTALIV, exclusively diaphanous. 

Many personalized variations are 

possible for a contrasting, prestigious 

result, using these three treatments. 

Description 

CRISTALI, II/III and IV treatments change the 

aspect of glass giving it a translucent, smooth, 

silky appearance. 

Use 

Glass that is treated with CRISTALI, II/III and 

IV helps create personalized soft, private and 

elegant atmospheres for residential or professional 

areas. 


IV can be used in many ways: 

• doors, windows, partitions; 

• wall coverings; 

• shower enclosures; 

• furniture, worktops, table or desk tops, closet 

doors; 

• stair steps, floor tiles. 

Advantages 

Personalization 

CRISTALI, II/III and IV acid etchings can be 

entirely personalized. They provide many possibilities 

to harmonize with the area in which 

they are used: 

• alternating transparent and translucid effects; 

• use of different acid shades with or without 

clear etching; 

• for making logos, patterns or designs of your 

choice; 

• combined with other DBI surface treatments 

(such as LAKOPAK or LAKTRANS). 

Beauty and light 


IV create refined beauty that ensures diffused 

light while preserving privacy of the area. 

Easy maintenance 


IV are much easier to clean and maintain in 

comparison to other acid etchings. 

Range 

DBI’S CRISTALI, II/III and IV acid treatments 

are only made-to-measure. 

DBI offers three uniform acid shades, from 

the whitest (CRISTALI) to the most translucid 

(CRISTALIV). These shades can be combined 

on the same glass in order to create selected 

designs. The acid treatment can also be done 

on both sides of the glass. 

It also exists in two granito shades of acid, 

CRISTALV (glossy) and CRISTALVI (mat). 

Patterns and designs 

A catalogue of patterns and designs is available, 

however customers may also ask for vectorization 

of their own illustrations. 

Glass media 

Personalized acid treatments can be applied 

to most glass media, shaped or not: 

• clear glass; 

• extra clear glass; 

• tinted glass; 

• printed glass (treatment on smooth side); 

• coated glass; 

• clear and colored mirror; 

• laminated glass; 

• tempered glass; 

• dual windowpanes. 

Dimensions and thicknesses 

There are no limits on dimension and thickness 

for treatment except for 

those that are inherent to the 

glass media that is used. 

Transformation 

After CRISTALI, II/III and IV acid treatment, 

glass can be shaped, tempered, laminated, (satin 

side should not be in contact with PVB), 

curved. Assembled in dual windowpanes, it is 

preferable to place the treated side on side 

4 (inside). It cannot be placed on the innerspace 

(sides 2 or 3) unless it is left untreated 

on the area that comes into contact with the 

double windowpanes’ rubber seal. 

DBI SA 

Zoning Industriel Tournai Ouest 

Rue de l’Ancienne Potence, 9 | 7501 ORCQ 

tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 

n°ent. BE 0429 387 821 | RPM TOURNAI 

info@dbi-sa.be | www.dbi-sa.be 

ING 375-0842836-82 | IBAN BE25375084283682 | BIC BBRUBEBB

GLASS 

DECORATIVE 


CRISTALBRIGHT 


CRISTALBRIGHT (formerly called « Gravure 

Brillante ») is a special glossy acid treatment 

for clear glass that gives it a new, delicate and 

refined finish. 

Description 

CRISTALBRIGHT treatment maintains glass 

transparency while giving it an embossed 

effect. 

Use 

CRISTALBRIGHT etched glass can be used to 

create personalized luminous, elegant atmospheres 

for residential or professional areas. 

The transparent embossed effect can be used 

in many ways: 

• doors, windows, partitions; 



doors. 

Range 

DBI’S CRISTALBRIGHT treatments are only 

made-to-measure. 

One treatment shade 

CRISTALBRIGHT is especially adapted to 

adding dimension to small repetitive patterns 

placed all over or in specific areas of glass. 

Glass media 

CRISTALBRIGHT can be applied to most 

glass media: 

• clear and extra clear glass 


• varnished glass; 

• clear and colored mirrors; 


• tempered glass. 


CRISTALBRIGHT treatments can be applied 

as you like, either on glass that has already 

been shaped, tempered, laminated, assembled 

as double windowpanes. 

They can also be applied to glass before shaping, 

tempering, laminating (treated side out), 

assembling as double windowpanes, silvering, 

curving. 

Advantages 


DBI’S CRISTALBRIGHT treatments can be 

completely personalized to discreetly and elegantly 

fit into all areas: 

• for making logos, patterns or small repetitive 

designs of your choice; 


(such as color) 

Beauty, discretion and light 

CRISTALBRIGHT creates refined beauty on 

glass and guarantees transparency. 


CRISTALBRIGHT is as easy to clean and 

maintain as clear glass. 


There is no limit on maximum dimension or 

thickness for shaped work. 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


CRISTALCLASSIC 


DBI still produces and reproduces 

CRISTALCLASSIC acid etchings that 

are representative of the Art nouveau 

and Art Déco period (years 

1890-1930). 

The figurative scenes and floral 

patterns are historical symbols of 

DBI’S profession. 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


CRISTALDESIGN 


CRISTALDESIGN (formerly called “Satinovo 

Design”) is an etching technique 

(special acid) that enhances the 

decorative value of industrial plain 

acid etched glass. 

Description 

CRISTALDESIGN is a treatment where a 

design of your choice is etched on industrial 

plain acid etched glass. The parts that are etched 

by DBI become more transparent than 

the frosted base, providing a contrast between 

the two shades. 

Use 

CRISTALDESIGN enables personalized creation 

of soft, private and elegant atmospheres 

in residential or professional areas at a lower 

price. 

It can be used in many ways: 

• doors, windows and partitions; 

• wall coverings; 



doors. 

Privacy, beauty and light 

Satin glass in 2 shades without clear etch, 

CRISTALDESIGN ensures diffused light while 

maintaining privacy. 


Maintenance is the same as for industrial plain 


Glass media 

CRISTALDESIGN can only be applied to industrial 

plain acid etched glass. 


Maximum dimension and thickness are the 

same as those of the glass on which it is applied. 


CRISTALDESIGN can be applied either on 

glass that has already been shaped, tempered, 

laminated, assembled in double windowpanes 

(acid etching on side 1 or 4). It can also be 

applied on glass before shaping, tempering, laminating 

(satin side should not be in contact 

with PVB), assembling in double windowpanes 

(satin side on side 1 is not recommended), silvering, 

curving. 

Advantages 

Quality/Price Ratio 

CRISTALDESIGN combines beauty and elegance 

for glass treated with 2 shades of acid 

at an attractive price since the glass used as a 

base for the treatment is an industrially plain 



CRISTALDESIGN can be completely personalized 

and is the perfect treatment for industrially 

acid etched glass. It enables the creation 

of logos, designs and patterns of your choice 

in 2 shades of acid. 

Range 

CRISTALDESIGN treatments are only madeto-measure. 

Single shade treatment without clear etch 

CRISTALDESIGN is available as a single shade 

etch, which contrasts with industrially plain 

acid etched glass on which it is applied. 

Designs 

DBI has a large catalogue of designs, but also 

offers services to vectorize customer illustrations. 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


CRISTALINE 


CRISTALINE is a clever combination 

of micro-sandblasting followed by 

a special dirt-resistant acid treatment. 

Uncomparable mat-crystal 

effect with easy maintenance. An 

exclusive product that is a favorite 

with those who have tried it. 

Description 

CRISTALINE is a sandblasting treatment for 

glass, combined with an acid treatment for a 

structured, luminous look and perfect maintenance. 


CRISTALINE has the quality of being dirt-resistant 

and is easy to clean and maintain. 

Does not alter with time 

An acid treatment applied to sandblasted etching 

changes the characteristics of sandblasting 

making it dirt-resistant unlike additional 

protections that can alter with time. 



• stamped glass; 








Use 

CRISTALINE is used to personalize private, 

professional and residential areas. 





doors; 

• safety markings for glass doors and partitions. 


CRISTALINE can be applied on glass that has 

already been shaped, tempered, laminated, 

assembled in double windowpanes. When 

assembled in double windowpanes, CRISTA- 

LINE can only be applied on the inside (side 

2 or 3) if it is not treated in the rubber seal 

area. Otherwise, the side that is treated with 

CRISTALINE must be placed on the outside of 

one of the two windowpanes. 

Advantages 


CRISTALINE can be completely personalized. 

It can be used in many ways to harmonize 

with all areas: 


• for making logos, designs or patterns of your 

choice; 


(such as color). 

Beauty and light 

After an initial sandblasting, CRISTALINE creates 

refined, sparkling beauty and ensures diffused 

light while maintaining privacy. 

Range 

CRISTALINE treatments are only made-tomeasure. 

One shade treatment 

CRISTALINE can be applied to all or part of 

the surface to be treated. In this case, a text, 

logo, geometric design or other pattern of 

your choice can be made with CRISTALINE. A 

catalogue of patterns and designs is available, 

however customers may also ask for vectorization 

of their own illustrations. 

Glass media 

CRISTALINE can be applied to most glass media: 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


CRISTALSTEPS 


DBI’s large particle size sandblasting 

is called CRISTALSTEPS. It gives glass 

a good non-slip surface. Combined 

with an acid treatment, it protects 

against dirt deposits and improves 

non-slip properties of treated surfaces. 

Description 

CRISTALSTEPS combines sandblasting and 

acid treatment to create a surface that is less 

slippery in comparison to a simple sandblasting 

treatment, with anti-dirt properties. 

Does not alter with time 

An acid treatment applied to sandblasted etching 

permanently changes the characteristics 

of sandblasting, making CRISTALSTEPS more 

dirt-resistant. 





After treatment, glass can be cut, shaped, tempered, 

laminated (satin side should not be in 

contact with PVB). 

Use 

CRISTALSTEPS is made to be used on floor 

tiles and stair steps in homes, offices, hotels 

and retaurants, businesses… 

Treatment is applied directly to laminated 

floor tiles 

Advantages 


CRISTALSTEPS can be completely personalized: 

• plain treatment; 


• making logos, designs and patterns of your 

choice. 


CRISTALSTEPS is dirt-resistant and very 

easy to clean and maintain. 

Range 

CRISTALSTEPS treatments are only madeto-measure. 

Single shade treatment 

CRISTALSTEPS can be applied to all or part 

of the surface. In this case, a text, logo, geometric 

design or other pattern can be added. 

Glass media 

CRISTALSTEPS can be applied to most glass 

media, shaped or not, however, the final application 

is best on laminated glass. 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


LAKTRANS 

COLORS BY DBI 

The infinite universe of translucid 

color applied to glass. 

Description 

Coated glass is obtained by applying one 

choice of color on the front or back side of 

glass. When applying the translucid coating, 

LAKTRANS, glass is first treated to give it diffusive, 

non-transparent qualities. 

Use 

Coated glass is adapted to non-damp areas in 

which color enhances the atmosphere. 

DBI’S translucid coating, (LAKTRANS), offers 

an unlimited choice of colors. Colors from the 

RAL, NCS, Pantone ranges or from a sample, 

LAKTRANS treatment can be used to personalize 

residential or professional areas. 

Coated glass can be used in many ways: 

• fitting-out: hinged or sliding doors, decorative 

panels, partitions; 

• furtniture: personalization of table or desk 

tops, shelves, wardrobe and closet doors; 

• signage solutions: logos and inscriptions, 

alone or in combination with deep-etched 

sandblasting (SANDDEEP). 

Advantages 


DBI’S coated glass can be completely personalized. 

It can be used in many ways to fit into 

all areas: 

• unlimited selection of colors inspired by 

RAL, NCS, Pantone ranges or manual customtinting 

according to sample; 

• it is possible to combine several colors on 

the same glass; 

• combination of opaque and translucid colors; 


choice; 


(for example, CRISTALI, II/III & IV, 

CRISTALINE, SANDDEEP, ...) 

Coating protection 

Coating applied to the back of glass protects 

the aspect and colors from deterioration. 

Range 

LAKTRANS treatments are only made-tomeasure. 

No standard range, all colors from 

the RAL, NCS or Pantone ranges can be made 

translucid. 

Glass media 

DBI’S LAKTRANS coatings can be applied to 

most glass media: 


• glass treated with acid; 

• stamped glass (treatment on smooth or 

printed side) ; 


• laminated glass ; 



There are no maximum limits on dimension 

or thickness for coating treatments. However, 

when treating large surfaces with a translucid 

coating, clouds of color or dry spots sometimes 

appear, and they are acceptable within 

a certain limit of tolerance inherent to the 

method of manufacture. It is also important 

to note that the choice of glass media (type 

and thickness) has an effect on the color perceived 

on the glass side. For light colors such 

as white or yellow, an extra-clear glass should 

be used to limit the effect of the natural green 

tint of glass. 


Coating can be applied on simple glass or 


laminated, curved, assembled in double windowpanes. 

It can also be applied on glass before cutting, 

shaping, assembling in double windowpanes. 

Glass that is treated with LAKTRANS can not 

be tempered after treatment. 

Assembled in double windowpanes, the coated 

side should be placed on the inside of the 

double pane (side 2 or 3), 

only if it has not been treated 

in the rubber seal area. 

Otherwise, the coated side should 

be placed on the outside of one of the 

two panes. 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


LAKOPAK 

COLORS BY DBI 

The infinite universe of color applied 

to glass. 

Description 

Opaque glass coating, LAKOPAK, consists in 

applying a selected color to the back side of 

the glass in several successive, specific coats. 

Use 

Coated glass can be used preferably in nondamp 

areas in which color enhances the atmosphere. 

DBI’S opaque coating (LAKOPAK) offers 

an unlimited selection of colors. LAKOPAK 

treatment uses colors from the RAL, NCS, 

Pantone ranges or from samples, for personalized 

residential or professional areas. 

Coated glass can be used in many ways: 

• fitting-out: wall coverings, hinged or sliding 

doors, decorative panels, partitions; 

• furniture: personalization of table and office 

tops, shelves, wardrobe and closet doors; 

• kitchen and bathroom: wall coverings, glass 

sinks, worktops or splashguards for sinks and 

bathtubs; 

• signage solutions: logos and inscriptions, 

alone or in combination with deep-etched 

sandblasting (SANDDEEP). 

Advantages 


DBI’S opaque coated glass can be completely 

personalized. They can be used in many ways 

to fit into all areas: 

• unlimited choice of colors: RAL, NCS, Pantone 

ranges or manual custom-tinting using a 

sample; 

• possibility of combining several colors on 

the same glass; 

• opaque and translucid color combinations; 


choice; 

• combined with other surface treatments 

(for example, CRISTALI, II/III & IV, CRISTA- 

LINE, SANDDEEP, ...) made by DBI. 

Coating protection 

Application of coating on the backside of the 

glass protects the aspect and colors from deterioration. 

Easy installation 

Opaque coated glass (LAKOPAK) can be 

installed mechanically or glued in place using 

products for mirrors (neutral glue or doubleside 

adhesive foam). Solvent-based glues or 

acetic silicones should never be used. 

Range 

LAKOPAK treatments are only made-tomeasure. 

All the colors in the RAL, NCS, Pantone 

ranges are available. Personalized tints 

can be made using customer samples. 

Some additional DBI coating treatments are 

possible in supplement to the LAKOPAK base 

coat treatment. Their usefulness depends on 

how the coated glass will be used. DBI offers 

an opaque coating, a reinforced coating and/ 

or a safety coating. 

Glass media 

DBI’S LAKOPAK coatings can be applied to 

most glass media: 


• acid-treated glass; 

• stamped glass (treatment on smooth or 

stamped side); 


• laminated glass ; 



There are no maximum limits on dimension 

or thickness for coating treatments. However, 

the choice of glass media (type and thickness) 

has an effect on the color perceived on the 

glass side. For light colors such as white or 

yellow, an extra-clear glass should be used 

to limit the effect of the natural green tint of 

glass. 


Coating can be applied on simple glass or 


laminated, curved, assembled in double windowpanes. 

It can also be applied on 

glass before cutting, shaping, 

assembling in double windowpanes. 

Glass that is treated with 

LAKOPAK can not be tempered after 

treatment. 

Assembled in double windowpanes, the coated 

side should be placed on the inside of the 

double pane (side 2 or 3), only if it has not 

been treated in the rubber seal area. Otherwise, 

the coated side should be placed on the 

outside of one of the two panes. 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


SANDUNI, SANDMICRO, 

SANDART & SANDGRADES 

SANDS BY DBI 

The size of particles that are projected determines 

the glass finish. From micro-sand 

to the largest particles of sand (SANDUNI | 

SANDMICRO), from frosting (SANDART) to 

grading (SANDGRADES), DBI is an expert in 

treatment for various uses for uncomparable 

results. 

Description 

Sandblasting is an operation that dulls the 

glass surface by projecting sand at high-pressure. 

During the treatment, abrasive particles 

attack the glass, making it translucid. The size 

of sand particles and the material that is used 

determine the treatment’s finished abrasiveness 

and smoothness. 

Use 

Sanded glass is used to personalize private or 

professional areas. 





doors; 

• safety markings for glass doors and partitions; 

• stair steps, floor tiles (also see anti-slip treatment, 

CRISTALSTEPS). 

Advantages 


DBI’S sand treatments can be completely personalized, 

offering numerous possibilities to 

fit all areas: 



choice; 



Privacy and light 

Sanded glass adds privacy to a room, while 

maintaining natural light. 

Range 

Sanded glass is only made-to-measure. The 

following can be made using various processes: 

SANDUNI – uniform sandblasting 

Sandblasting can be applied to all or part of 

the surface to be treated. In this case, a text, 

logo, geometric design or other pattern of 

your choice can be sandblasted. A catalogue 

of patterns and designs is available, however 

customers may also ask for vectorization of 

their own illustrations. 

SANDMICRO – micro-sandblasting 

The use of extremely fine particles of sand 

gives the sandblasted glass an aspect that is 

close to acid etched glass. It is ideal for dirtresistant 

protection on double windowpanes. 

SANDART - frosting 

By using different abrasives and sandblasting 

techniques, graded frosting can be applied 

to specific parts of a design to add texture. 

This technique is mostly used for sandblast 

etching figurative designs (birds, reeds, herons, 

Venus…). 

SANDGRADES - grading 

Grading can be applied to all or part of the 

surface, with or without clear etching, beginning 

with a tratment at 100%, gradually decreasing 

sandblasting intensity. 

Glass media 

Sandblasting treatments can be used on most 

glass media: 



• stamped glass; 









Sandblasting treatments can be applied to 

your choice of glass that has already been shaped, 

tempered, laminated, curved, assembled 

in double windowpanes. 

When assembled in double windowpanes, the 

sandblasted side must not be placed on the 

inside of the double windowpane (side 2 or 

3), unless there is no treatment in the rubber 

seal area. Otherwise, the sandblasted side 

must be placed on the outside of one of the 

two panes (exterior applications: no treatment 

on side 1). 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


SANDDEEP & SANDBOLD 

SANDS BY DBI 

SANDDEEP and SANDBOLD are original, 

personalized techniques borrowed 

from stonemasonry. They add sculptural 

dimension to glass texture. 

Description 

Atmosphere and light 

Sandblasted and carved glass treatments change 

natural light into unreal, extraordinary reflections 

that are enhanced by the treatment’s 

structure and depth, similar to the sun’s reflection 

in a diamond or ice sculpture. 

Deep sandblasting (SANDDEEP) enables 

deep, generous texture for designs. 

After the SANDDEEP treatment which gives 

deep pattern structure, glass carving (SAND- 

BOLD) adds a multitude of sparkles to glass. 

Range 

Sandblasted and carved glass treatments are 

only made-to-measure. It is possible to vary 

the depth of sandblasting according to the 

desired effect and the pattern. SANDDEEP is 

perfectly suited to text creations. 

Use 

Textured sandblasted glass can be used for 

personalizing private or professional interiors. 

They can be used in many ways: 


• furniture, worktops, table or desk tops; 

• stair steps, floor tiles (also see the anti-slip 

treatment, CRISTALSTEPS) ; 

• glass sculptures and works of art using glass 

media; 

• trophies; 

• signage solutions. 

Advantages 


DBI’S sandblasted and carved treatments can 

be completely personalized. They can be used 

in many ways to fit into areas: 

• alternating transparent and translucid effects, 

depth and texture contrasts; 


choice; 



Glass media 

Sandblasting can be applied to most glass 

media: 



• coated glass ; 




thickness for shaped work. However, we recommend 

using a media that is thick enough 

to obtain the desired texture. 


Glass that is treated with SANDDEEP and 

SANDBOLD can not be tempered after treatment. 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14 




GLASS 

DECORATIVE 


GRAVANEUF 

CLEANING SOLUTION 

Description 

DBI’S GRAVANEUF is a cleaning product 

made to remove stubborn stains that cannot 

be removed from acid-etched glass with 

classic products. 

The product effectively restores acid-etched 

surfaces, however it is absolutely necessary to 

follow instructions for use and safety. 

« Common stains » - type 2 

• Grease 

• Oil 

• Sauce 

• Blood 

• Cream 

• Rust 

• Fingerprints ... 

GRAVANEUF is only for use on acid-etched 

surfaces and must only be used according to 

instructions for use and safety instructions 

(see safety sheet). 

ACID CLEANER BOX 

The ACID CLEANER BOX is a complete 

cleaning box by DBI. 

Instructions for cleaning and maintaining 

all acid-etched glass 

« Work site stains » - type 1 

• Polymer 

• Silicone 

• Glue 

• Paint 

• Varnish 

• Insulating foam 

Operation 

1. Carefully remove the dirt with a scraper. 

Hold the tool flat to shave the dirty surface. 

2. Test to find the best adapted solvent. Use 

solvent on a cloth to rub off most of the stain. 

3. Pour GRAVANEUF on an absorbant cloth 

to rub the spot with circular motion from the 

center out (like waxing a car) for +/- 30 seconds. 

Immediately rub with a dry cloth in the 

same manner until completely dry. Warning: 

immediately wipe off any drips or spills. 

4. Final treatment or maintenance 

Apply by rubbing the spot on all of the surface 

with an “Instanet”-type product, or apply 

GRAVANEUF diluted in the same quantity 

of water (½ GRAVANEUF + ½ water). Rub 

carefully with a sponge for at least 3 minutes. 

Rinse and wipe acid-etching, it will look like 

new. Repeat all operations if necessary. 

Operation 

1. Apply GRAVANEUF (see operations 3 and 

4 for type 1 stains) 

2. Some stains can be removed using powder 

cleaners (Vim or Ajax) with a damp metal pad. 

Then rinse and dry. 

Slight finger marks can be removed using an 

artist rubber. 

« Technical stains » - type 3 

• Skid marks, grinding 

• Cerium oxide 

• Mechanical dirt 

Operation 

Apply GRAVANEUF (see operations 3 and 4 

for type 1 stains). 

Caution 

GRAVANEUF contains fluorhydric acid, 

wear gloves when manipulating. 

Protect floors during treatment (especially 

marble). 

Rinse well under running water in 

case of contact with skin or eyes. 

See a doctor in case of prolonged 

contact. Keep out of the reach of 

children. 

The kit is packaged in a portable storage box 

and contains: 

• 2 disposable aprons 

• 2 garbage bags 

• 10 absorbant white cloths 

• 2 sponges 

• 4 steel wool pads 

• 1 artist’s rubber 

• 1 liter of white spirits 

• 1 liter of acetone 

• liters of Gravaneuf 

• 1 liter of Instanet 

• 250g of Vim 




tél. 0032 (0)69 23 48 62 | fax 0032 (0)69 84 23 14

DBI CATALOG

Create successful ePaper yourself

Delete template?

Save as template?