Non-system - Rux GmbH

Lattice girder and triangular column
Triangular column
Steel tube, Ø 48.3 mm, hot dip galvanized,3 scaffold tubes linked together in triangular form, side length 0.17 m.
High load capacity. (Leg length 125 mm)Permissible load when stressed centrally:
To utilise the maximum load bearing capacity, the columns need a non-rigid design at the top and bottom.
Part No. Length m Width m Height m Weight approx. kg Price €E/each for order volume of: price per piece
00793 3.000 35.000 152.50 1: 136.00 10: 113.80
00795 4.000 47.000 199.60 1: 169.50 10: 142.00
00796 5.000 65.000 253.00 1: 219.20 10: 187.00
00797 6.000 70.000 298.50 1: 257.50 10: 218.50
Lenght (m) P approval (kN)
Permissible load when stressed centrally: 3.0 100 = (10,000 kp)
To utilise the maximum load bearing capacity, 4.0 90
the columns need a non-rigid design at the 5.0 80
top and bottom.
6.0 70
170
170
Triangular base plate
For triangular column, steel, hot dip galvanized, plate Ø 30 cm, with 3 welded spigots for diverting the load into the ground.
Part No. Length m Width m Height m Weight approx. kg Price €E/each for order volume of: price per piece
00788 0.300 0.300 6.300 43.50 1: 39.00 10: 34.00
End adapter for triangular columns
Steel, hot dip galvanized, for central load distribution in triangular support column.
Base jacks or head jacks can be used. Height 15 cm. Requires tube connectors article No. 00377.
Part No. Length m Width m Height m Weight approx. kg Price €E/each for order volume of: price per piece
00789 0.170 0.170 2.600 43.50 1: 38.50 10: 34.30
Tube connector with half-coupler
Steel, hot dip galvanized
Part No. SW Weight approx. kg Price€E/each. for order volume of: price per piece
00470 SW 19 1.800 14.00 1: 11.50 20: 9.50
00471 SW 22 1.800 14.00 1: 11.50 20: 9.50
14 RUX GmbH · Fon +49 2331 4709-0 · Fax +49 2331 4709-202 · info@scafom-rux.de · www.scafom-rux.de