Non-system - Rux GmbH

Price listNon-system ACCESSORIES 

ACCESSORIES 

Price list VM-1.1 

Non-system

t: 

m: 

e: 

Geschäftsleitung / Management 

Volker Rux 

Geschäftsführer 

Managing Director 

+49 (0)2331 47 09-100 

+49 (0)151 16 20 65 00 

volker.rux@scafom-rux.de 

Marco Hiby 

Leitung Verkauf 

General Sales Manager 

t: 

m: 

e: 

Verkaufsleitung / Sales Management 

Rainer Krüger 

Leitung Verkauf Inland 

Sales Manager Domestic 

+49 (0)2331 47 09-210 

+49 (0)151 16 20 65 03 

rainer.krueger@scafom-rux.de 

Walter Hiby 

Key Account Manager 

t: 

m: 

e: 

Technik / Technic 

Michael Nordmeier 

Technische Leitung 

Technical Manager 

+49 (0)2331 47 09-310 

+49 (0)170 91 67 007 

michael.nordmeier@scafom-rux.de 

Miete / Rental 

Stephan Winterhoff 

Leitung Miete 

Manager Rental 

t: 

m: 

e: 

t: 

e: 

+49 (0)2331 47 09-200 

+49 (0)151 16 20 65 01 

marco.hiby@scafom-rux.de 

Berater Innendienst / Sales Department 

Udo Lüling 

Verkauf 

Sales Department 

+49 (0)2331 47 09-230 

udo.lueling@scafom-rux.de 

t: 

m: 

e: 

t: 

e: 

+49 (0)2331 47 09-240 

+49 (0)151 16 20 65 02 

walter.hiby@scafom-rux.de 

Lars Kretzschmar 

Verkauf 


+49 (0)2331 47 09-251 

lars.kretzschmar@scafom-rux.de 

t: 

m: 

e: 

t: 

e: 

+49 (0)2331 47 09-114 

+49 (0)171 56 57 432 

stephan.winterhoff@scafom-rux.de 

Anke Tancev 

Verkauf 


+49 (0)2331 47 09-211 

anke.tancev@scafom-rux.de 

t: 

m: 

e: 

t: 

m: 

e: 

Deniz Orak 

Verkauf 


+49 (0)2331 47 09-260 

+49 (0)151 16 20 41 13 

deniz.orak@scafom-rux.de 

Berater Außendienst / Sales Representatives 

Andreas Hoffmann 

Verkauf PLZ: 0 / 98-99 

Area Sales Manager 

+49 (0)351 33 602-65 

+49 (0)151 16 20 41 08 

andreas.hoffmann@scafom-rux.de 

t: 

e: 

t: 

m: 

e: 

Jenny Reil 

Verkauf 


+49 (0)2331 47 09-253 

jenny.reil@scafom-rux.de 

Frank Wiemann 

Verkauf PLZ: 50-56 / 580-585 


+49 (0)2331 47 09-242 

+49 (0)151 16 20 41 07 

frank.wiemann@scafom-rux.de 

t: 

m: 

e: 

Roland Okken 

Verkauf PLZ: 1 / 23923-23996 


+49 (0)30 51 58 88-22 

+49 (0)151 16 15 88 81 

roland.okken@scafom-rux.de 

Thomas Venn 

Verkauf PLZ: 3 / 48-49 / 

57-59 / 586-589 


Jörn Winkler 

Verkauf PLZ: 2 

(ausgen. 23923-23996) 


Helmut Blauth 

Verkauf PLZ: 6 / 7 / 88-89 


t: 

m: 

e: 

+49 (0)2331 47 09-245 

+49 (0)151 16 20 41 09 

thomas.venn@scafom-rux.de 

t: 

m: 

e: 

+49 (0)441 68 26 82 

+49 (0)151 16 20 65 04 

joern.winkler@scafom-rux.de 

m: 

e: 

+49 (0)160 90 14 28 51 

helmut.blauth@scafom-rux.de 

t: 

m: 

e: 

Hans-Jörg Schmitz 

Verkauf PLZ: 40-47 


+49 (0)2331 47 09-220 

+49 (0)163 31 63 113 

hans-joerg.schmitz@scafom-rux.de 

t: 

m: 

e: 

Mirko Langer 

Verkauf PLZ: 80-87 / 90-97 


+49 (0)8664 32 50 42 

+49 (0)151 14 77 39 22 

mirko.langer@scafom-rux.de 

Hotline +49 (0)2331 47 09-180 

www.scafom-rux.de

TABLE OF CONTENTS 

CATEGORY SUBJECT PAGE 

1 Tubes and base jacks 4 -5 

2 Couplers 6-9 

3 Castors 10 

4 Lattice girders 11-13 

5 Lattice girders and triangular column 14 

6 Ladders and accessories 15-16 

7 Aluminium beams 17-18 

8 Aluminium planks 19 

9 Timber planks 20-22 

10 Ratchet spanners and work aids 23-24 

11 Mounting material 25-26 

12 Tarpaulins, nets and keder systems 27-30 

13 Pallets and storage 31-33 

14 Site safety equipment 34-35 

15 Work safety 36-37 

17 Order form 38 

18 Conditions of sale and delivery 39

Tubes and base jacks 

Steel scaffold tube 11/2, 3.25 mm wall thickness“ 

Steel St 37, hot dip galvanized, dimensions according to DIN 4427. Ø 48.3 x 3.25 mm. Manufacturing length: 6.00 m. 

Approved for connection with standard couplings. 

Part No. Length m Width m Height m Weight approx. kg Price €E/each for order volume of: price per piece 

07070 1.000 3.400 7.10 1: 6.30 61: 5.50 244: 5.10 

07072 2.000 6.800 13.95 1: 12.55 61: 10.80 244: 10.80 

07074 3.000 10.200 20.95 1: 18.85 61: 15.95 244: 15.40 

07076 4.000 13.600 27.90 1: 25.10 61: 21.65 244: 19.60 

07078 5.000 17.000 34.85 1: 31.40 61: 26.65 244: 24.50 

07080 6.000 20.400 39.90 1: 35.90 61: 30.40 244: 27.85 

Larger quantities upon request 

Steel tube 1 1/2” 4.05 mm wall thickness 


00270 6.000 49.80 1: 38.40 61: 34.30 244: 31.80 

Price and delivery time on demand 

Aluminium tube 11/2” 4.00 mm wall thickness 

Aluminium, Ø 48.3 x 4.00 mm. Factory lengths of 6.00 m and 8.00 m. 

For connection of standard couplers in light scaffold structures. 


00959 6.000 8.400 64.90 1: 57.80 50: 49.40 200: 44.30 

Other sizes and larger quantities upon request 

Base plate 

Steel, hot dip galvanized, base plate 150 x 150 mm with spigot approx. 60 mm high, for diverting the load on the 

standards onto the pad. 


00378 1.200 4.30 1: 4.10 100: 3.75 

Base jack Ø 38 mm 

Steel, hot dip galvanized, for heavy loads, high-speed round thread, wall thickness 5 mm. 

Load capacity up to 50 kN. 


00357 0.300 2.400 11.90 1: 10.40 100: 8.20 250: 7.40 

00358 0.500 3.200 13.80 1: 11.90 100: 8.90 250: 8.50 

08358 0.600 3.900 14.30 1: 12.30 100: 9.20 250: 8.90 

00360 0.780 4.200 18.30 1: 15.80 100: 12.60 200: 11.80 

00365 1.000 4.700 22.90 1: 19.60 100: 15.50 200: 13.90 

4 RUX GmbH · Fon +49 2331 4709-0 · Fax +49 2331 4709-202 · info@scafom-rux.de · www.scafom-rux.de

Tubes and base jacks 

Threaded base plate Ø 32 mm 

Steel, hot-dip galvanized, Ø 32 mm, high-speed trapezoidal thread, with knurled nut. 


00356 0.500 3.000 13.80 1: 11.90 100: 8.90 250: 8.50 

00359 0.780 3.900 18.30 1: 15.80 100: 12.60 250: 11.80 

Special prices see price list non-system accessories 

Hinged, adjustable base jack Ø 38 mm 

Steel, hot dip galvanized, with tiltable plate 150 x 150 mm. 

Permissible load: 25.4 kN. 


00361 0.500 3.100 29.60 1: 24.00 50: 22.50 100: 19.80 

RUX GmbH · Fon +49 2331 4709-0 · Fax +49 2331 4709-202 · info@scafom-rux.de · www.scafom-rux.de 5

Couplers 

Standard BB coupler 

Metric thread, steel, drop-forged, hot dip galvanized, robust design, ribbed, with mark of conformity as per EN 74, 

for rectangular coupling of scaffold tubes. 

With collar nuts 19 or 22 mm width across the flat. Galvanized collar nut and t-bolt. Approved either as an individual coupler for a 

permissible load of 9.1 kN or as a double coupler for 15.2 kN. Tightening torque of the collar nuts 50 Nm. 

Part No. SW Weight approx. kg Price€E/each. for order volume of: price per piece 

04963 SW 19 1.300 4.60 1: 4.10 250: 3.40 1000: 2.90 

04962 SW 22 1.300 4.60 1: 4.10 250: 3.40 1000: 2.90 

Couplers with stamped name on it, for order volume of more than 5000 pieces of one sort, 

price on demand. 

Standard coupler BB with hot-dip galvanized high-speed bolt 

Steel, drop-forged, hot dip galvanized, robust design, ribbed, with conformity mark according to EN 74, for rectangular coupling of 

scaffold tubes. 

With collar nuts of 19 or 22 mm in width. Approved either as an individual coupler for a permissible load of 9.1 kN or as a double 

coupler for 15.2 kN. Tightening torque of the collar nuts 50 Nm. 

With BB Certificate. 


04963S SW 19 1.300 4.90 1: 4.40 250: 3.60 1000: 3.20 

04962S SW 22 1.300 4.90 1: 4.40 250: 3.60 1000: 3.20 

Swivel B coupler 



Metric thread, steel, drop-forged, hot dip galvanized, robust design, ribbed, with mark of conformity as per EN 74, 

for connection of scaffold tubes at random angles. With collar nuts 19 or 22 mm width across the flat. Galvanized collar nut and 

t-bolt. 

Permissible load 9.1 kN. 

Tightening torque of the collar nuts 50 Nm. 


04960 SW 19 1.400 5.90 1: 4.70 250: 3.90 1000: 3.50 

04961 SW 22 1.400 5.90 1: 4.70 250: 3.90 1000: 3.50 



Swivel coupler B with hot-dip galvanized high-speed bolt 

Steel, drop-forged, hot dip galvanized, robust design, ribbed, with mark of conformity according to EN 74, 

for coupling of scaffold tubes at random angles. 

With collar nuts 19 or 22 mm width across the flat. Permissible load 9,1 kN. 



04960S SW 19 1.400 6.20 1: 5.00 250: 4.20 1000: 3.80 

04961S SW 22 1.400 6.20 1: 5.00 250: 4.20 1000: 3.80 

Tension coupler 



Steel, drop-forged, hot-dip galvanized, robust design, ribbed, with mark of conformity as per EN 74, 

for tube extension in connection with a tube connector. 

With collar nuts of 19 or 22 mm width across the flat. Galvanized collar nut and t-bolt. Permissible load 9.1 kN. 

Collar nut tightening torque 50 Nm. 


00494 SW 19 1.600 6.90 1: 5.70 100: 4.95 400: 4.40 

00492 SW 22 1.600 6.90 1: 5.70 100: 4.95 400: 4.40 




Couplers 

Tube connector 

Steel, drop-forged, hot dip galvanized, for scaffold tubes Ø 48.3 mm for producing 

compression-proof butt connections, for use together with tension coupler. 


00377 1.000 3.50 1: 2.95 100: 2.75 500: 2.55 

Half-coupler 

Steel, drop-forged, hot dip galvanized, robust design, ribbed, with mark of conformity as per EN 74, 

as weld-on couplers or for special structures, with collar nuts of 19 or 22 mm width across the flat. 

Galvanized collar nut and t-bolt. 

Approved as an individual coupler for a permissible load of 9.1 kN. Tightening torque of the collar nuts 50 Nm. 

The 16 mm Ø punched hole allows the half-coupler to be screw fastened. 


00497 SW 19 0.700 3.10 1: 2.70 100: 2.46 300: 2.30 

00495 SW 22 0.700 3.10 1: 2.70 100: 2.46 300: 2.30 

Shore coupler 

Steel, drop-forged, hot dip galvanized, half coupler with welded shore hook. 

Ideal for tying scaffolds at larger distances between wall and scaffold. 

With collar nuts of 19 or 22 mm width across the flat. Galvanized collar nuts and t-bolts. 



00444 SW 19 1.100 8.95 1: 6.20 50: 5.80 100: 5.60 

00445 SW 22 1.100 8.95 1: 6.20 50: 5.80 100: 5.60 

Carrier coupler 

Steel, drop-forged, hot dip galvanized, half-coupler with welded steel bracket for suspending tubes or chains on 

steel structures, 9 kN permissible load, to be fitted in pairs, with collar nuts of 19 or 22 mm width across the flat. 

Galvanized collar nuts and T-bolt. 



00453 SW 19 1.100 9.70 1: 9.20 100: 7.30 250: 6.95 

00454 SW 22 1.100 9.70 1: 9.20 100: 7.30 250: 6.95 

Gravity lock coupler 

Steel, drop-forged, hot dip galvanized, half-coupler with collar nuts of 19 or 22 mm width across the flat and welded gravity lock. 

Galvanized collar nuts and T-bolt. 



00447 SW 19 0.800 7.30 1: 6.25 100: 5.50 250: 4.95 

00448 SW 22 0.800 7.30 1: 6.25 100: 5.50 250: 4.95 

Lattice girder coupler 

For axial connection of the lattice girder to a standard. 


E04RS0559 1.600 22.60 

Please indicate width across the flat. 


Couplers 

Square timber coupler, swivable 

Steel, drop forged, hot dip galvanized, half coupler with collar nuts of 19 or 22 mm width across the flat and perforated, 

swivable bracket for fitting square timber. Galvanized collar nut and t-bolt 


00450 SW 19 2.000 15.30 1: 12.90 50: 11.50 100: 11.20 

00451 SW 22 2.000 15.30 1: 12.90 50: 11.50 100: 11.20 

Parallel coupler 

Steel, drop-forged, hot dip galvanized. Galvanized collar nut and t-bolt. The parallel coupler serves to rigidly connect various system 

standards, or non-system scaffold tubes, to one another, in parallel direction taking design-related conditions into account. 

Axis spacing 180 mm. 


01511 SW 19 1.900 15.90 1: 12.90 50: 10.90 100: 9.90 

01512 SW 22 1.900 15.90 1: 12.90 50: 10.90 100: 9.90 

Screw-on coupler 

Steel, drop-forged, hot dip galvanized, half-coupler with collar nut 19 or 22 mm width across the flat and welded machine bolt 

M 14 x 50 mm. Galvanized collar nut and t-bolt. 


00464 SW 19 0.700 7.50 1: 6.50 50: 5.90 100: 5.10 

00465 SW 22 0.700 7.50 1: 6.50 50: 5.90 100: 5.10 

Standard reduction coupler 

Steel, drop-forged, hot dip galvanized, for connecting tubes with different outer diameters, 

with collar nuts. galvanized collar nuts and t-bolts. 

Part No. Weight approx. kg Price€E/each. for order volume of: price per piece 

00106 SW 19 For tube Ø 48x34 mm 1.100 13.30 1: 11.90 100: 9.90 200: 8.70 





Delivery time and other dimensions on demand 

Swivel coupler with reduction piece 

Steel, drop-forged, hot dip galvanized, for connecting tubes with different outer diameters, 

with collar nuts. galvanized collar nuts and t-bolts. 







Delivery time on demand 


Couplers 

Spare parts for couplings 

Part No. Price €E/each for order volume of: price per piece 

05330 Cover galvanized 1.79 

05329 Centre piece, crudeperforated 1.58 

05331 Rivet 0.20 

t-bolt - metric 

Steel St 37, drop-forged, electro-galvanized, M 14 thread, shaft length approx. 68 mm. 

Tensile strength 5.8 in accordance with ISO 898 T. 1. 


00433 0.090 0.30 100: 0.26 600: 0.22 2000: 0.20 

Collar nut - metric 

Steel St 37, drop-forged, galvanized, 19 or 22 mm width, 

tensile strength category 5 in accordance with ISO 898 T. 2. 


00430 SW 19 0.030 0.18 200: 0.16 600: 0.14 2000: 0.13 

00431 SW 22 0.040 0.18 200: 0.16 600: 0.14 2000: 0.13 

T-bolt with hot-dip galvanised high-speed thread 

Steel St 37, drop-forged, hot dip galvanized, high-speed thread, shaft length app. 68 mm. 

Tensile strength 5.8 in accordance with ISO 898 T. 1. 


07042ES 0.090 0.50 100: 0.45 600: 0.42 2000: 0.40 

Collar nut with hot-dip galvanised high-speed thread 

For the hot-dip galvanized high-speed bolt, steel ST 37, drop-forged, 19 or 22 mm width, 

tensile strength category 5 in accordance with ISO 898 T. 2. 


07040ES SW 19 0.030 0.35 200: 0.30 600: 0.25 2000: 0.20 

07041ES SW 22 0.030 0.35 200: 0.30 600: 0.25 2000: 0.20 


Castors 

Castor 

Reinforced, galvanized steel plate housing, ball bearings in slewing ring, sliding bearing in the hub, nylon wheel, 

with locking lever, no overhang when castor is locked. 

With additional foot lever for releasing the brake. 


02449 Castor 3.0 kN, wheel Ø 150 

3.000 65.80 1: 45.00 8: 39.50 24: 35.80 

mm Height: 180 mm plus 

spindle 500 mm 

05507 Castor 10.0 kN, Ø 200 mm- 

7.000 82.00 1: 68.80 8: 58.00 24: 53.00 

Height: 250 mm plus spindle 

500 mm.. 

Special prices see price list non-system accessories 

Steering castor 12.5 kN (1250 kp) permissible load 

High-quality steel housing and precision slewing ring in the fork head. Vulcanite wheel 250 x 60 mm with ball bearing and wheel 

lock and cast steel spigot for coupler connection to prevent castor from falling out. Fitting height: 320 mm. 


00384 0.320 14.900 198.00 1: 169.00 8: 158.00 24: 152.50 

Castor 7.5 kN (750 kp) permissible load 

Fixed castor for bridge or hall construction, 250 x 50 mm, ball bearings, steel plate housing with stop 

and retainer to prevent castor from falling out. With spigot 200 x 38 mm, Fitting height: 260 m 

Clear width 19 mm. 


00392 0.260 6.600 59.70 1: 56.50 8: 52.00 24: 48.30 

Flange wheel 

The castor housing is equipped with two additional half-couplers to create a sturdy chassis 

for special scaffolding designs. Width across the flat: 19 mm. 


04676 With nylon wheel 15 kN 

12,800 240,00 1: 220,00 4: 202,00 12: 182,50 

(1500 kp) permissible load 

04688 with steel wheel, 30 kN 

(3000 kp) permissible load 

25,400 395,00 1: 395,00 4: 315,00 12: 295,00 

Universal mobile base unit 

For all scaffolding systems with Ø 48.3 mm, with two adapters. 

Variable thanks to adjustable connectors, to fit also other system scaffolds 

(without 

Part No. 

castors!). 

Length m Width m Height m Weight approx. kg Price €E/each for order volume of: price per piece 

05505 2.000 23.200 191.00 1: 176.00 4: 159.00 8: 148.00 


Lattice girder 

Aluminium lattice girder 450 

Aluminium tube, Ø 48.3 mm, wall thickness 4 mm 


00982 3.200 0.450 13.000 145.00 1: 122.00 10: 113.00 20: 99.80 

00983 4.200 0.450 17.000 188.00 1: 156.00 10: 142.00 20: 132.50 

00984 5.200 0.450 21.000 219.00 1: 179.00 10: 168.00 20: 155.00 

00985 6.200 0.450 25.000 259.50 1: 215.00 10: 196.50 20: 180.50 

00986 8.200 0.450 33.000 345.00 1: 279.00 10: 258.00 20: 239.00 

Aluminium lattice girder 1000 

Aluminium tube, Ø 48.3 mm, wall thickness 4 mm. 

Light weight. For heavy loads and bridging structures with minimum dead weight. 


07115 3.200 1.050 16.700 205.00 1: 185.00 10: 149.00 20: 138.00 

07116 4.200 1.050 21.900 260.00 1: 234.00 10: 189.00 20: 175.00 

07117 5.200 1.050 25.900 312.00 1: 280.00 10: 225.00 20: 209.00 

07118 6.200 1.050 30.800 372.00 1: 289.00 10: 269.00 20: 249.00 

Steel lattice girder 450 

Steel tube St 37-2, Ø 48.3 mm, wall thickness 3.25 mm 


00632 3.200 0.450 30.000 115.00 1: 90.50 10: 79.60 20: 71.80 

00633 4.200 0.450 37.000 152.00 1: 120.00 10: 110.50 20: 98.80 

00634 5.200 0.450 48.000 185.00 1: 155.50 10: 136.50 20: 125.60 

00635 6.200 0.450 61.000 212.00 1: 181.00 10: 154.50 20: 142.50 

00636 7.300 0.450 70.000 258.00 1: 218.00 10: 179.80 20: 166.40 

00637 7.800 0.450 75.000 276.00 1: 238.00 10: 196.50 20: 178.70 


Steel tube St 37 with increased yield point, s = 320 N/mm², hot dip galvanized, Ø 48.3 mm. Wall thickness 3.25 mm, parallel chord 

lattice girder, 750 mm wide. Suitable as a bridge for special structures with high load capacity or for larger span widths. 


00781 2.000 0.750 27.000 131.00 1: 114.00 10: 103.00 20: 93.00 

00782 3.000 0.750 31.000 175.00 1: 152.00 10: 138.00 20: 125.00 

00783 4.000 0.750 42.000 216.00 1: 188.00 10: 171.00 20: 156.00 

00784 5.000 0.750 50.000 274.00 1: 238.00 10: 217.00 20: 198.00 

00785 6.000 0.750 60.000 324.00 1: 282.00 10: 257.00 20: 234.00 

00786 7.000 0.750 69.000 365.00 1: 317.00 10: 289.00 20: 263.00 

00787 7.500 0.750 75.000 378.00 1: 329.00 10: 299.50 20: 275.00 




Steel tube St 52, hot dip galvanized, Ø 48.3 mm. Wall thickness 3.60 mm, parallel lattice girder, 1050 mm wide. 


01492 1.630 1.050 33.000 169.00 1: 159.00 10: 139.00 20: 129.00 

01494 2.260 1.050 35.000 202.00 1: 181.50 10: 161.50 20: 151.50 

01495 2.870 1.050 51.000 262.00 1: 226.50 10: 206.50 20: 196.50 

01497 4.120 1.050 62.000 354.00 1: 295.00 10: 275.00 20: 265.00 

01499 5.360 1.050 83.000 445.00 1: 363.00 10: 343.00 20: 333.00 

Berlin lattice girder 

Steel, hot dip galvanized, tube diameter Ø 48.3 mm. 


00816 2.000 26.100 16.800 79.50 1: 63.60 10: 55.70 20: 51.70 

00817 3.000 26.100 25.200 112.00 1: 89.60 10: 78.40 20: 72.80 

00819 5.000 26.100 42.000 182.00 1: 145.60 10: 127.40 20: 118.30 

Tube connector for lattice girders, 3.25 mm wall thickness 

Steel St 37-2, hot dip galvanized. For continuous extension of girders with 3.25 mm wall thickness. 


00615 straight 1.800 11.90 1: 9.90 20: 8.90 

00616 curved, short 2.000 13.70 1: 10.90 20: 9.90 

00617 curved, long 2.400 14.80 1: 11.90 20: 10.90 

Tube connector for aluminium lattice girders 4.00 mm 

Steel St 37-2, hot dip galvanized 


00618 1.800 11.90 1: 9.90 20: 8.90 

Tube connector for heavy-duty lattice girder 

LA version, including 4 machine screws M 14 x 70, 8.8 


06206 12.30 1: 10.25 20: 9.20 

Tube connector for lattice girders, 3.60 mm wall thickness 

Steel St 52-3, hot dip galvanized 


00614 straight 2.500 14.90 1: 12.90 20: 10.90 

Hexagon steel screw M 12 x 60 mm, 8.8 

Incl. Nut. 


00812 0.060 0.60 1: 0.50 100: 0.40 



Insert pin 

Galvanized. The insert pin for boltless connection of lattice girders replaces the usual bolts 

and thus greatly reduces erection times. The highly tensile pins can be used for all RUX lattice girders. 


00813 Insert pin 0.070 1.46 1: 1.40 100: 1.19 

00814 Washer 0.006 0.10 1: 0.08 100: 0.06 

00815 Cotter pin 0.012 0.48 1: 0.42 100: 0.40 

Adapter for vertical frames on lattice girder bridges 

Steel, hot dip galvanized. The use of this adapter eliminates the time-consuming and complicated fitting of the 

vertical frames to non-system lattice girder bridges with an overall height of 45 cm. The self-locking adapters are placed on the 

lattice girders and adjusted by means of threaded spindles. The free-standing frames are immediately secured against any tipping 

over. Suitable for all conventional scaffold systems and lattice girders. 


00638 5.900 37.50 1: 26.50 12: 24.50 

Universal wall connector plate for lattice girders, Ø 20 mm drill hole 

Steel, hot dip galvanized, 4 drilled holes. Universally suitable for all conventional types of lattice girder, a firm, rigid connection 

between the structure and the lattice girder is created with the application of heavy-duty anchors. 


00639 1.200 15.600 68.50 1: 53.50 12: 44.90 

150 

160 

U-head jack 

60 

Steel, tiltable by 5°, hot dip galvanized, head plate 160 x 150 x 60 mm. 


00363 0.550 5.800 49.60 1: 44.00 30: 39.90 


Lattice girder and triangular column 

Triangular column 

Steel tube, Ø 48.3 mm, hot dip galvanized,3 scaffold tubes linked together in triangular form, side length 0.17 m. 

High load capacity. (Leg length 125 mm)Permissible load when stressed centrally: 

To utilise the maximum load bearing capacity, the columns need a non-rigid design at the top and bottom. 


00793 3.000 35.000 152.50 1: 136.00 10: 113.80 

00795 4.000 47.000 199.60 1: 169.50 10: 142.00 

00796 5.000 65.000 253.00 1: 219.20 10: 187.00 

00797 6.000 70.000 298.50 1: 257.50 10: 218.50 

Lenght (m) P approval (kN) 

Permissible load when stressed centrally: 3.0 100 = (10,000 kp) 

To utilise the maximum load bearing capacity, 4.0 90 

the columns need a non-rigid design at the 5.0 80 

top and bottom. 

6.0 70 

170 

170 

Triangular base plate 

For triangular column, steel, hot dip galvanized, plate Ø 30 cm, with 3 welded spigots for diverting the load into the ground. 


00788 0.300 0.300 6.300 43.50 1: 39.00 10: 34.00 

End adapter for triangular columns 

Steel, hot dip galvanized, for central load distribution in triangular support column. 

Base jacks or head jacks can be used. Height 15 cm. Requires tube connectors article No. 00377. 


00789 0.170 0.170 2.600 43.50 1: 38.50 10: 34.30 

Tube connector with half-coupler 

Steel, hot dip galvanized 


00470 SW 19 1.800 14.00 1: 11.50 20: 9.50 

00471 SW 22 1.800 14.00 1: 11.50 20: 9.50 


Ladder and accessories 

Vertical steel ladder with tube connectors 

The stringers consist of 48.3 mm steel tubes, to ensure standard coupler connection. Rung spacing 28 cm. 


E04RS0454 2.000 0.430 16.300 89.00 1: 67.00 10: 58.00 

E04RS0455 3.000 0.430 23.600 128.00 1: 93.00 10: 80.50 

E04RS0456 4.000 0.430 38.400 164.50 1: 120.00 10: 105.00 

Vertical aluminium ladder with tube connectors 

With solidly riveted tube connectors, suitable for all types of scaffolds including ladder scaffolds. 

The stringers are 48.3 mm aluminium tube ensuring standard coupler connection. Rung spacing 28 cm, including plastic base. 


00965 2.000 0.470 6.000 83.50 1: 67.00 10: 59.00 25: 55.00 

00966 3.000 0.470 9.000 113.50 1: 90.00 10: 79.50 25: 74.00 

00967 4.000 0.470 11.000 143.00 1: 115.00 10: 99.90 25: 93.00 

00968 5.000 0.470 14.000 182.60 1: 146.00 10: 128.00 25: 119.00 

00969 6.000 0.470 16.000 209.50 1: 167.00 10: 147.00 25: 137.00 

Drop pin 


00396 0.100 0.98 1: 0.94 100: 0.86 200: 0.79 

Spacer tube complete with ferrule and pin 

Steel, hot dip galvanized, for compensating large unevenness in the terrain. To be used together with plank bearer 

and base jack. Range of adjustment 10 x 0.10 m = 1.00 m. 


00668 1.800 6.400 37.50 1: 30.90 10: 27.60 

Spare parts for spacer tube 


00568 Sleeve ferrule 0.135 2.25 1: 1.80 10: 1.60 

00569 Pin Plug 0.178 3.95 1: 3.10 10: 2.85 


Ladder and accessories 

Scaffold cord 

Made of polypropylene mixed with sisal, with an eyelet at one end. 

Part No. Length m Price€E/each. for order volume of: price per piece 

01359 1.800 PP/plastic material, breaking resistance 

0.69 1: 0.62 200: 0.56 

500 kg 

01337 1.500 Sisal/polypropylene, breaking 

0.66 1: 0.62 200: 0.55 

resistance 480 kg 


0.74 1: 0.68 200: 0.58 



0.84 1: 0.78 200: 0.69 



0.91 1: 0.85 200: 0.75 


Other designs and lengths upon request 


Aluminium beam 

Aluminium girder l 160 

The aluminium girder can be fitted to any structure with sufficient load 

capacity without any trouble. The premium-quality alloy – Al Zn 4.5 Mg 1 

F 35 – makes this aluminium girder extremely robust and stable. Specially recommended for 

bridging large areas and for ceiling scaffolds. The aluminium girders can be decked with conventional scaffold planks. A wooden 

batten is firmly fitted to the upper bar of the girder to enable the overlying planks to be firmly screw tightened for ceiling scaffolds. 

This means they are secured against slipping and the girders are braced. 


01004 6.400 0.120 33.900 360.00 1: 288.00 10: 252.00 

01009 8.000 0.120 42.400 425.00 1: 340.00 10: 297.50 

01017 11.900 0.120 47.700 655.00 1: 524.00 10: 458.00 

Größere Stückzahlen auf Anfrage. 

Single field uniform load 

Single field point load at centre of field 

Span L (m) 

Permissible 

uniform load 

Z (kN/m) 

Permissible 

total load 

Q (kN) 

. . . . . . . . 

. . . . . . . . 

. . . . . . . . 

Span L (m) 

Permissible 

point load 

P (kN) 

. . . . . . . . 

. . . . . . . . 

Aluminium beam TITAN 225 

This scaffold element can be mounted on any stable base without any problems. Thanks to the excellent alloy Al Zn 4,5 Mg 1 F 35, 

it is extremely robust with a high load-bearing capacity. Particularly suited for large bridges and ceiling scaffolds. The beams can 

be decked with conventional scaffold planks. 


07124 3.000 0.100 25.500 233.00 1: 209.00 10: 186.00 

07125 5.000 0.100 42.500 385.00 1: 345.00 10: 308.00 

07127 7.500 0.100 63.700 580.00 1: 520.00 10: 464.00 

Größere Stückzahlen auf Anfrage. 

Single field uniform load 

Single field point load at centre of field 

Span 

L (m) 

1.50 3.00 3.60 4.20 4,80 5.40 6.00 7.50 9.00 

Span 

L (m) 

1.50 3.00 3.60 4.20 4.80 5.40 6.00 7.50 9.00 

Permissible 

uniform 

load 

Z (kN/m) 

54.52 30.17 17.46 10.99 7.37 5.17 3.77 1.93 1.12 

Permissible 

point 

load 

P (kN) 

40.89 56.57 39.28 28.86 22.10 17.46 14.14 9.05 6.29 

Butt plate for aluminium girder 160 

Galvanized, for extending 2 I beams. Set consisting of two butt plates and four screws (M16 x 100 mm). 


01020 0.600 0.210 11.400 49.00 

Butt plate for TITAN-H beam 225 

Galvanized, for extending 2 H-beams. Set consisting of 2 butt plates and 6 screws (M 16 x 100 mm). 


07130 0.600 0.210 16.000 65.00 


Aluminium beam 

Universal beam clamp for beams 16 -70 mm 

Robust design, drop-forged, hot-dip galvanized, max. clamping width 40 mm 


00087 0.050 0.100 2.200 36.00 1: 24.00 20: 22.00 

For special prices see accessory price list. Please specify width across the flat. 

Holding claw 

For connecting scaffold tubes to steel I-profile beams up to a width of 300 mm. 

Area of application: suspended scaffolds underneath bridges, and steel structures. 


00730 0.500 0.250 13.800 156.00 1: 139.00 10: 125.00 

Adapter coupler 

For aluminium beams 160 and aluminium H beams 225 


00731 0.500 0.250 9.000 105.00 1: 93.00 10: 89.50 


Aluminium planks 

Part No. Length m Width 

m 

Scaffold 

group 

Aluminium gangway 

Thanks to its wide span, the aluminium gangway is 

ideal for ceiling scaffolds and bridges. The gangway 

consists of closed rectangular profiles. 30 to 50 cm 

tilt-proof support with sufficient load capacity required. 

If several gangways are placed next to each other, they are joined together 

to make one unit with connecting rods. These rods are inserted through the 

side openings in the gangways and fastened. A bearing load of 1.50 kN/m² pursuant 

to Scaffold Classification Group 2 has to be taken into account. The aluminium gangways 

allow economic construction options for working and protective scaffolds and are 

suitable for the application of safety and roof safety barriers as per DIN 4420. 

Weight approx. kg Price €E/each for order volume of: price per piece 

00987 4.120 0.570 2.0 kN 23.000 437.80 1: 360.80 10: 328.00 

00988 5.200 0.570 2.0 kN 30.000 572.70 1: 472.00 10: 429.00 

00989 6.000 0.570 2.0 kN 35.000 641.70 1: 529.00 10: 481.00 

00990 8.000 0.570 2.0 kN 59.000 979.00 1: 817.00 10: 734.00 

00991 10.200 0.570 1.5 kN 72.000 1,177.00 1: 967.00 10: 879.00 

1.50kN/qm uniformly distributed 

1.50kN/qm point load 

Railing holder for aluminium planks 

For clipping on random system railing posts to enable simple assembly 

of 3-part safety guard rails. 


00404 for 1 plank 2.800 27.50 1: 24.90 10: 22.40 

00407 for 2 planks 3.400 38.70 1: 34.50 10: 31.40 

Railing holder opposite hand for aluminium planks 

For clipping on random system railing posts.The opposite hand holder enables easy assembly of double-side, 3-part safety guard 

rails. 


00408 1.400 19.80 1: 18.10 10: 16.40 

Tilt lock 

For aluminium planks, steel, drop-forged, hot dip galvanized, half coupler with collar nut 19 or 22 mm width 

across the flat and welded iron bracket to prevent tilting of the aluminium planks. 


00401 SW 19 1.000 15.60 1: 15.40 10: 13.80 

00402 SW 22 1.000 15.60 1: 15.40 10: 13.80 


Timber planks 

Special bonded plank, red impregnated 

The non-system safety plank for use on all modular and tube/coupler scaffolds. Normal risk of breakage in timber parts significantly 

reduced through computer-controlled laser testing of the individual timber sections. Testing in accordance with DIN 4074, 

grading category S10. The environmentally-friendly impregnation ensures enhanced protection against rotting and thereby extends 

the service life. 

Thickness: 45 mm 


01096 1.000 0.240 6.000 8.55 1: 7.67 80: 6.86 240: 6.27 

01097 1.500 0.240 9.000 12.80 1: 11.50 80: 10.30 240: 9.40 

01098 2.000 0.240 12.000 17.10 1: 15.35 80: 13.72 240: 12.53 

01099 2.500 0.240 15.000 21.35 1: 19.20 80: 17.15 240: 15.66 

01100 3.000 0.240 18.000 25.60 1: 23.00 80: 20.57 240: 18.79 

01101 3.500 0.240 21.000 29.86 1: 26.84 80: 24.00 240: 21.92 

01102 4.000 0.240 24.000 34.13 1: 30.67 80: 27.43 240: 25.06 

Wooden plank 

Tested in accordance with DIN 4074 grade S10. 

Thickness: 45 mm 


01075 1.000 0.240 6.000 5.18 1: 4.43 80: 4.10 240: 3.67 

01078 1.500 0.240 9.000 7.78 1: 6.64 80: 6.16 240: 5.51 

01080 2.000 0.240 12.000 10.37 1: 8.86 80: 8.21 240: 7.34 

01082 2.500 0.240 15.000 12.96 1: 11.07 80: 10.26 240: 9.18 

01083 3.000 0.240 18.000 15.55 1: 13.28 80: 12.31 240: 11.02 

01086 3.500 0.240 21.000 18.14 1: 15.50 80: 14.36 240: 12.85 

01090 4.000 0.240 24.000 20.74 1: 17.71 80: 16.42 240: 14.69 

01094 4.500 0.240 27.000 23.33 1: 19.93 80: 18.47 240: 16.52 

01095 5.000 0.240 30.000 25.92 1: 22.14 80: 20.52 240: 18.36 

01106 1.000 0.280 7.000 6.05 1: 5.17 80: 4.97 240: 4.28 

01107 1.500 0.280 10.500 9.07 1: 7.75 80: 7.18 240: 6.43 

01109 2.000 0.280 14.000 12.10 1: 10.33 80: 9.58 240: 8.57 

01111 2.500 0.280 17.500 15.12 1: 12.92 80: 11.97 240: 10.71 

01112 3.000 0.280 21.000 18.14 1: 15.50 80: 14.36 240: 12.85 

01114 3.500 0.280 24.500 21.17 1: 18.08 80: 16.76 240: 14.99 

01115 4.000 0.280 28.000 24.19 1: 20.66 80: 19.15 240: 17.14 

01116 4.500 0.280 31.500 27.22 1: 23.25 80: 21.55 240: 19.28 

01117 5.000 0.280 35.000 30.24 1: 25.83 80: 23.94 240: 21.42 

Special prices for larger quantities upon request! 

Plank width 

cm 

Scaffold group 

Plank thickness in cm 

3.0 3.5 4.0 4.5 5.0 

Permissible span in m 

1.25 1.50 1.75 2.25 2.50 

20 

1, 2, 3 

24 und 28 1.25 1.75 2.25 2.50 2.75 

20 

1.25 1.50 1.75 2.25 2.50 

4 

24 und 28 1.25 1.75 2.00 2.25 2.50 

20, 24, 28 5 1.25 1.25 1.50 1.75 2.00 

20, 24, 28 6 1.00 1.25 1.25 1.50 1.75 


Timber planks 

Surcharge for hooped planks, per plank 


01069 With corrugated iron hoop 1.80 

01071 Cornered with galvanized iron 

2.90 

hoops, incl. embossed name 

Iron hoop for scaffolding planks 

Galvanized, with folded corners. 

The weight refers to 100 units. 


00757 0.500 0.030 11.000 0.46 100: 0.43 1000: 0.41 

00759 0.600 0.030 12.000 0.50 100: 0.46 1000: 0.43 

Iron hoop for scaffoldingplanks with name embossing 

Galvanized, with folded corners and name embossing, 



00758 0.500 0.030 11.000 0.50 100: 0.47 1000: 0.44 

00760 0.600 0.030 12.000 0.60 100: 0.52 1000: 0.49 

Corrugated iron hoop 

Bright metal, for driving into the ends of boards, price per roll = approx. 50 m. 


00761 0.018 0.001 6.800 29.60 1: 27.40 4: 25.50 


Timber planks 

Steel plank, non-system 

Steel, hot dip galvanized, perforated. With firmly integrated anti-skid band. 

Height: 45 mm 


05622 1.000 0.190 6.700 33.20 50: 23.00 200: 21.50 

05623 1.500 0.190 9.100 39.20 50: 26.95 200: 25.20 

05624 2.000 0.190 11.900 45.30 50: 31.00 200: 29.00 

05625 2.500 0.190 13.600 58.00 50: 41.50 200: 38.80 

05636 3.000 0.190 16.300 67.00 50: 51.90 200: 48.50 

05608 1.000 0.260 6.700 34.20 50: 24.00 200: 22.50 

05609 1.500 0.260 9.100 39.90 50: 27.70 200: 25.90 

05610 2.000 0.260 11.400 45.80 50: 31.50 200: 29.50 

05611 2.500 0.260 13.600 59.60 50: 42.50 200: 39.80 

05606 3.000 0.260 18.200 68.50 50: 53.00 200: 49.60 

05612 1.000 0.300 6.900 34.20 50: 24.00 200: 22.50 

05613 1.500 0.300 9.300 39.90 50: 27.70 200: 25.90 

05614 2.000 0.300 11.700 45.80 50: 31.50 200: 29.50 

05617 2.500 0.300 14.100 59.60 50: 42.50 200: 39.80 

05628 3.000 0.300 16.300 68.50 50: 53.00 200: 49.60 

Locking spring for non-system steel planks 

Solid steel wire, hot-dip galvanized, to secure non-system steel planks against lift-off 


05607 0.060 0.010 0.010 0.39 100: 0.30 500: 0.26 

Toe board clamp 

Solid steel wire, hot dip galvanized, for fixing toe boards in tube and coupler scaffolds, and 

for fixing planks in safety scaffolds (roofer safety guard). 


00376 0.100 1.86 100: 1.68 500: 1.49 


Ratchet spanner and work aids 

Ratchet spanner - Mannesmann ratchet 

special design with steel striker head and aluminium handle, rivetted, extremely robust, heavy-duty design with single nut, length: 

31 cm. 


00321 SW 19 0.800 86.00 1: 76.80 5: 72.80 10: 68.50 

00322 SW 22 0.800 86.00 1: 76.80 5: 72.80 10: 68.50 

Double ratchet spanner - Mannesmann ratchet 

as above but with double nut. 


00326 SW 19 / 22 0.900 92.50 1: 79.60 5: 76.40 10: 74.20 

00328 SW 22 / 24 0.900 92.50 1: 79.60 5: 76.40 10: 74.20 

Double ratchet spanner ROBUST 

Extra long and sturdy lever arm for easy operation, high-grade steel, 5-year guarantee when used properly! Length: 36 cm, with 

double nut. 


05218 SW 19 / 22 0.900 39.00 1: 29.50 5: 27.00 10: 24.50 

Double ratchet spanner LIGHT 

Simple and handy for universal use, length 31 cm, with double socket 19/22 


04657 SW 19 / 22 0,400 36,00 1: 23,50 5: 21,50 10: 19,90 

Spare parts for ratchet spanner 

(identical with Mannesmann, made in Germany) 

Part No. Price€E/each. for order volume of: price per piece 

00345 Aluminium handle 15.34 

00344 Housing 51.13 

00340 Half round rivet for handle 5 x 25 DIN 660 0.51 

00329 Double ratchet wheel SW 19 + 22 40.39 

00331 Doppel-Sperrad SW 22 + 24 49.80 

00332 Ratchet wheel SW 19 30.68 

00333 Ratchet wheel SW 22 30.68 

00335 Catch 15.34 

00337 Locking pin 1.02 

00342 Pressure spring for locking pin 0.51 

00336 Cover 5.11 

00341 Half round rivet for cover 2.5 x 20 DIN 660 0.51 

00339 Snap ring for cover 1.02 

00338 Change lever 2.05 

00343 Pin for change lever 2 x 12 mm 0.51 

Special prices for larger quantities upon request 


Ratchet spanner and work aids 

STABILA spirit level with magnet 

Aluminium. Easy to handle, extremly robust and shock-proof. A precision instrument, not only when used in the normal position but 

also for overhead work. With hole for snap hook. 


00867 0.250 0.200 34.80 1: 31.30 10: 28.90 20: 26.40 

Ratchet spanner belt 

leather 


00346 1.200 0.100 9.90 1: 9.70 10: 9.30 20: 9.10 

Ratchet spanner holster 

Leather 


00347 0.070 4.80 1: 4.40 10: 4.00 

Snap hook 

Material Ø 11 mm, steel, galvanized. 


00735 0.120 0.180 1.76 1: 1.76 10: 1.60 20: 1.50 


Mounting material 

Tie tester 

For checking the capacity of scaffold ties. Using the ratchet to adjust the pull-out force, the tensile strength 

of the tie can be determined exactly. The pull-out breaking cone is not adversely affected by the testing 

operations. 

Measuring range 0-10.00 kN, for eyebolts up to 20 cm in length. 


03242 0.545 0.050 1.800 290.00 1: 275.00 

Support Cylinder 

For the tie tester. 


03244 0.235 0.100 1.800 48.00 1: 39.50 

Stainless M 16 permanent anchor 

130 

(In accordance with DIN 4426). Permanent facade anchor. With the help of the height-adjustable M16 eye bolt, it is possible to 

bridge heat insulation layers with thicknesses between 20 and 25 mm. The stainless M 16 permanent anchor’s triangular design 

allows for fitting both to the right as well as left-hand side. This is particularly advantageous at the corners of buildings for 

example. 


07060 0.130 0.180 0.650 16.95 1: 13.90 50: 12.70 

180 

M16 eye bolt 

150 

Galvanized. To fit VA M16 permanent anchors. 


07061 0.150 0.300 3.90 1: 3.50 50: 2.95 

PU plug 

To fit VA M16 permanent anchor 


07062 0.030 1.40 1: 1.25 50: 1.15 

PE plate, self-adhesive 

For thermal separation of the M16 VA permanent anchor from the house wall. 


00375 0.150 0.030 0.85 1: 0.75 50: 0.65 


Mounting material 

Eye bolt 

with welded eye, galvanized, with fitting mark, suitable for 14 mm rawl plugs. 

Eye bolts in sizes 8 and 10 upon request. (Tested quality made in Germany) 


00290 0.090 0.012 0.155 0.64 1: 0.54 600: 0.52 1200: 0.50 

00291 0.120 0.012 0.155 0.68 1: 0.57 600: 0.55 1200: 0.53 

00292 0.160 0.012 0.155 0.78 1: 0.65 600: 0.62 1200: 0.60 

00293 0.190 0.012 0.155 0.88 1: 0.73 600: 0.71 1200: 0.68 

00294 0.230 0.012 0.155 0.98 1: 0.82 600: 0.79 1200: 0.76 

00295 0.300 0.012 0.155 1.20 1: 0.99 600: 0.96 1200: 0.92 

00296 0.350 0.012 0.155 1.34 1: 1.11 600: 1.07 1200: 1.03 

Cap for rawl plugs, white transparent 

For rawl plugs 14 mm 


01179 0.040 0.029 0.09 100: 0.08 1000: 0.07 

01199 0.050 0.025 0.09 100: 0.08 1000: 0.07 

01212 0.080 0.029 0.25 100: 0.18 1000: 0.14 

01201 0.120 0.030 0.35 100: 0.27 1000: 0.19 

Further colours and dimensions on request. 

Cap 

For rawl plugs 14 mm, Lid-Ø: 28 mm. The weight refers to 100 units. 

Part No. Length m Color Weight approx. kg Price €E/each for order volume of: price per piece 

01178 0.040 white-transparent 0.186 0.06 100: 0.05 1000: 0.04 

01180 0.040 grey 0.186 0.09 100: 0.08 1000: 0.07 

01194 0.040 black 0.186 0.09 100: 0.08 1000: 0.07 

Further colours and dimensions on request. 

Nylon rawl plug 

Shaft lengths: 

Plug 0.100 = 0.025 m shaft length 




01226 0.070 0.014 1.400 0.07 100: 0.06 1000: 0.05 5000: 0.04 

05237 0.100 0.014 2.500 0.19 100: 0.14 1000: 0.12 5000: 0.10 

05238 0.135 0.014 2.500 0.29 100: 0.22 1000: 0.18 5000: 0.15 

05239 0.185 0.014 2.500 0.39 100: 0.30 1000: 0.25 5000: 0.20 

Other sizes upon request 

Steel shore tube 

Steel tube Ø 48,3 mm, hot dip galvanized, for compression- and yield-proof tying of the scaffold, to be mounted with standard 

couplers. 


00367 0.300 1.400 7.80 1: 6.50 100: 5.70 

00368 0.400 1.800 8.50 1: 7.40 100: 6.40 

00369 0.600 2.500 10.10 1: 9.10 100: 7.60 

00370 1.000 4.000 12.80 1: 11.00 100: 9.60 

00372 1.400 5.400 15.10 1: 13.60 100: 11.30 


Tarpaulins, nets and keder systems 

Tarpaulin mesh fabric 200 

Mesh fabric coated on both sides with welded eyelet tapes for fastening to the scaffold. Extremely robust and tear-resistant, 

translucent. 

Weight per m²: 200 g. For metric and 07 bay lengths. 


04917 20.000 2.700 67.65 1: 48.05 24: 42.65 48: 39.95 

04918 20.000 3.200 80.15 1: 56.95 21: 50.55 42: 47.35 

corresponds to price of/m²: 0.89 / 0.79 / 0.74 

Tarpaulin mesh fabric 150 

Mesh fabic coated on both sides with welded eyelet tapes for fastening to the scaffold. 

Extremely robust and tear resistance, translucent. 

Weight per m²: 150 g 

For metric and 0.7 field lengths 


01277 20.000 2.700 53.00 1: 33.50 24: 32.00 48: 30.50 

01279 20.000 3.200 62.00 1: 39.00 21: 37.30 42: 35.50 

entspricht Preis/m²: 0,62 / 0,59 / 0,56 

Tarpaulin, band fabric 150 

Double eyelets every 50 cm, polyethylene, translucent. 



04564 20.000 2.600 35.50 1: 29.80 10: 28.50 

04565 20.000 3.100 42.00 1: 35.60 20: 34.00 

corresponds to price of/m²: 0.57 / 0.55 

Scaffolding net 50 

Monofilament HDPE fabric, 50 g/m², UV stabilised, tear-resistant, allows wind and light to penetrate, easy fitting ensured through 

reinforced edges with buttonhole band. A robust quality net for the scaffolder needing that little bit extra. 

Part No. Length m Width m Color Weight approx. kg Price €E/each for order volume of: price per piece 

01244 20.000 2.570 green 20.80 4: 18.50 20: 16.60 

01246 20.000 2.570 blue 20.80 4: 18.50 20: 16.60 

01247 20.000 3.070 green 25.30 4: 22.50 20: 19.90 


DELTA-toggle strap 

Enables quick fastening of DELTA tarpaulins and nets to scaffolds. 

Suitable for all scaffolding systems. 


01255 0.95 1: 0.95 100: 0.80 500: 0.70 



Expendable fastener, simple 

Color: natural 



01259 0.030 0.005 0.220 0.04 100: 0.04 2000: 0.03 10000: 0.03 

Expendable fastener, reinforced 

Color: natural 



01258 0.034 0.008 0.420 0.08 100: 0.08 2000: 0.06 10000: 0.05 

Net for roof safety barriers acc. to DIN 4420 Pt. 8.1.2 

Lateral net made of 4.50 mm nylon cord, mesh width 100 mm. With 12 mm Ø nylon cord around the edges. The quick and easy 

way to create a secure safety barrier on steel and ladder scaffolds. 



01317 5.000 2.000 29.80 1: 24.80 10: 21.60 

01319 10.000 2.000 60.00 1: 50.00 10: 43.50 

Other nets, e.g. safety nets for protection of individuals, upon request 


Quick-action belt fastener 

German utility patent for quick assembly of protective lateral nets consisting of a 25 mm wide strap, 

with a brass buckle. Fastening intervals: 1.00 m. 


01325 0.600 1.40 1: 1.30 100: 1.02 1000: 0.78 

Weather proctection system bearer with telescopic tube 

Width 

with infinitely variable extension tubes, fitting all scaffolding systems and widths. Brilliantly simple mounting. 

The optimal rain protection for all scaffolds. Additional back rails required: see system price list for RUX Super facade scaffolds 


05508 1.800 4.000 102.90 1: 89.00 10: 77.20 



PVC Keder tarpaulin for weather protection system bearer 

Super-light tarpaulin. The specified length refers to the bay length. 



05618 1.500 2.600 143.00 1: 130.00 10: 115.00 

05619 2.000 2.600 148.50 1: 135.00 10: 120.00 

05620 2.500 2.600 156.20 1: 142.00 10: 125.00 

05621 3.000 2.600 170.50 1: 155.00 10: 135.00 

Mesh reinforced PVC tent roof tarpaulin 

Product attributes: Material: PVC - extra strong, transparent with white mesh reinforcement, UV stabilised. 

Tear resistance: longitudinal 895 N, cross 850 N. 

Stretch: longitudinal 15 – 20%, cross 15 – 20%. 

Continued tearing force: longitudinal 215 N, cross 215 N. 

Keder strength: above 3,500 N. 

Temperature resistance: -40° to + 80° C 



01426 10.100 2.000 202.95 1: 202.95 5: 188.20 10: 180.70 

01422 10.100 2.070 210.00 1: 210.00 5: 194.90 10: 187.10 

01433 10.100 2.500 218.70 1: 218.70 5: 202.90 10: 194.70 

01444 10.100 2.570 226.40 1: 226.40 5: 210.10 10: 201.90 

01439 10.100 3.000 238.10 1: 238.10 5: 220.95 10: 212.10 

01445 10.100 3.070 243.75 1: 243.75 5: 226.20 10: 217.10 

Deviating lengths upon request. Customized cutting to length to suit individual building sites possible at short notice. 

PVC tent roof tarpaulin, reinforced and flame resistant 

This PVC-coated tarpaulin with keder cord hem provides a water- and dust-proof enclosure for workplaces in the areas of sand 

blasting and corrosion protection, and helps to prevent environmental damage. The tarpaulin is available in any desired length 

(max. 20 m) and width in the colours white, green, blue and grey (only in white in the B1 category). In the case of intermediate 

widths, the next larger size should be assumed. The tarpaulin is flame resistant pursuant to DIN 4102 B1. When ordering, please 

state the colour and the respective axial dimension of the scaffold field. The tarpaulin can be supplied with either a hem or brass 

eyelets along the front edge so as to allow connection to the next tarpaulin or to pull it tight to prevent any fluttering. 

Available in many lengths, widths and colours 



01296 8.100 2.500 306.10 1: 306.10 5: 284.00 10: 272.60 

01291 10.100 2.000 284.10 1: 284.10 5: 263.50 10: 252.90 

01292 10.100 2.070 294.00 1: 294.00 5: 272.80 10: 261.90 

01280 10.100 2.500 314.50 1: 314.50 5: 286.10 10: 274.90 

01297 10.100 2.570 316.90 1: 316.90 5: 294.10 10: 282.60 

01298 10.100 3.000 333.40 1: 333.40 5: 309.40 10: 297.00 

01299 10.100 3.070 341.30 1: 341.30 5: 316.70 10: 304.00 



Keder rail 

Aluminium profile to connect adjoining keder tarpaulins 


01449 1.000 1.500 14.90 1: 13.40 20: 11.95 

01454 2.000 3.000 29.80 1: 26.80 20: 23.90 

01456 3.000 4.500 44.70 1: 40.20 20: 35.85 

01458 4.000 6.000 59.60 1: 53.60 20: 47.80 

04717 5.000 7.500 74.50 1: 67.00 20: 59.75 

01459 6.000 9.000 89.40 1: 79.90 20: 69.90 

Keder coupling 

For fitting Keder rails to scaffold tubes. 


01309 SW 19 1.200 15.90 1: 12.90 50: 10.90 

01310 SW 22 1.200 15.90 1: 12.90 50: 10.90 

Ridge keder rail 

for gabled roof construction 


01450 1.000 1.500 32.50 1: 24.50 20: 23.70 

Eaves keder rail 

for crossover from gabled / lean-to roofs and scaffold walls 


01451 1.000 1.500 35.40 1: 29.80 20: 26.30 

Flexible keder rail 


01452 1.000 1.500 55.60 1: 52.30 20: 48.40 


Pallets and storage 

Stacker grid for all scaffolding systems 

Steel, hot dip galvanized. Accommodates 20 vertical frames and provides for orderly transportation and storage. 

Suitable for all vertical frames with a tube dia. of 48.3 mm. 

Suitable for crane and forklift truck. Two units required. 


01533 1.570 0.100 16.800 109.70 1: 102.00 20: 95.60 100: 89.80 

Slip-on adapter 

Steel, hot dip galvanized, to be slipped onto the tube connectors at the four corners of vertical frames 

when using stacker grids. Enables 2 or 3 stacks to be placed on top of each other. 

Four units required. 


01534 1.500 9.80 4: 9.20 40: 8.70 200: 8.20 

We will be pleased to find special solutions for your individual storing problems! 

Bundling pallet with cross base 

Steel, hot dip galvanized; for orderly bundling of tubes (e.g. guard rails, diagonal braces); 

to be used in pairs. 


05280 9.400 49.00 

Steel strip shearing machine 

For bands in widths of 12,7, 16 or 19 mm. This practical device offers the advantage of dispensing 

with sleeves for fastening the ends of strips. Creates heavy-duty fastenings secured against 

accidental opening (80–85% as firm as the strip itself). 


03158 4.900 795.00 

Decoiling trolley with storage box 

Strip-steel decoiler with a bobbin for widths of 9.5 – 19 mm. 


03161 31.000 369.00 

Steel strip coil for packaging 

Steel strip 16 x 0.5 mm (1 coil approx. 42 kg and approx. 700 m) 


03162 42.000 82.00 1: 77.60 3: 72.00 6: 69.40 



Stacking Pallet 



03165 1.300 0.700 34.000 139.00 1: 129.00 10: 114.30 30: 105.70 

Wire Mesh Box Pallet 



03178 1.300 0.700 65.000 365.00 1: 345.00 5: 299.00 10: 283.00 

Duralok stacking rack, dismountable 

Steel, hot dip galvanized, payload 1,500 kg. The rack for the secure transportation of scaffolding components consists of an extremely 

sturdy base frame element and welded lifting eye hooks. The asymmetric arrangement of the longitudinal and cross bars 

allows for cost-efficient loading and unloading of the stacking rack with a fork lift. 4 circular tubes with a diameter of 48.3 mm are 

also supplied. These circular tubes are scaffolding elements, thus enabling a simple exchange. Stackable large diameter disk feet 

prevent any sinking-in even on unsurfaced ground, are protective of the truck loading area and secure pallets stacked on one another. 

The circular tubes are placed in the rack during transportation and secured against any displacement. The securing element 

cannot get lost as it is attached to the rack. This means that a very small pack volume is needed for the transport or the storage of 

empty pallets. Wire mesh side panels are available to allow for simple conversion to a wire mesh box pallet. 


E08SR0032 1.250 0.850 45.600 198.00 1: 135.00 10: 125.00 50: 115.00 

Centre frame 

For insertion into the Duralok stacking rack. Facilitates safe transport of short parts. 


E08SR0034 0.850 20.40 1: 16.25 

Duralok wire mesh side panel 

To fit Duralok stacking rack 

Part No. Length m Weight approx. kg Price €E/each for order volume of: price per piece 

E08SR0036 0.850 Traverse railing 8.500 29.50 1: 23.50 

E08SR0035 1.250 Side railing 12.500 43.80 1: 35.00 

Duralok central panel 

Partition panel for Duralok stacking rack. 


E08SR0037 0.800 19.90 1: 15.90 



Duralok base panel 

Reinforced base panel to fit Duralok stacking rack 


E08SR0038 1.250 0.850 69.90 1: 55.90 

Duralok wire mesh box, complete 

Duralok stacking rack including base and lateral elements. 


E08SR0033 1.250 0.850 105.500 319.00 1: 299.00 10: 279.00 


Site safety equipment 

Site fence ROBUST 

Steel tube frame, hot dip galvanized, 41.5 x 2.7 mm Ø with 4.0/4.6 mm Ø round wire mesh, 

mesh width 100 x 300 mm, non-twisting. 


00806 3.500 2.000 22.700 69.60 1: 65.00 10: 58.00 25: 52.20 

00809 Coupling element 4.50 1: 4.20 10: 3.75 25: 3.40 

Concrete ballast weight 

Made of gravel concrete with six holes and two handle holes. 


00808 0.710 0.230 36.000 9.50 1: 8.90 10: 7.85 25: 7.50 

Scaffold sign 

PVC, with transparent pocket for scaffold classification forms DIN A5. 


01411 0.210 0.200 1.48 1: 1.30 50: 1.09 100: 0.99 

Form block 

For attaching to the signs. 50 sheets, DIN A5 per block, for classifying the scaffold on site. 


01412 2.25 1: 2.10 10: 1.99 25: 1.50 

Support pad for threaded base plate 

with reflector 


05632 3.40 1: 2.85 10: 2.45 50: 1.90 

Protective cap for coupling connections 

with reflector 


05629 3.80 1: 3.50 10: 3.20 50: 2.85 


Site safety equipment 

Protective tube end cap 

With reflector. For 48.3 mm tube. For longitudinal tubes 

Part No. Weight approx. kg Price €E/each for order volume of: price per piece 

05633 2.95 1: 2.60 10: 2.20 50: 1.75 

05635 for longitudinal tubes 2.95 1: 2.60 10: 2.20 50: 1.75 

Protective tube end cap without reflector 

for tubes with 6 − 20 mm inner diameter 


05634 0.49 1: 0.39 10: 0.35 50: 0.29 

Protective cap set for standard flange - complete 

1 set consists of 2 caps. 


05630 3.40 1: 2.85 10: 2.45 50: 1.90 

Protective cap for standard flange 

with ledger opening 


05631 3.40 1: 2.85 10: 2.45 50: 1.90 


Work safety 

Premium set 

Safety harness Revolution R2. Fixed back eyelet extension,Manyard fastener with shock absorber and tool bag. 


06120 size S/M 197.50 

06121 size L/XL 197.50 

Safety harness Revolution R2 

Front and back fall-arrest eyelets, back eyelet extension tested for sharp edges, high-speed adjustment, automatic buckle, protected 

label compartment, comfortable back support pad, belt end clip, integrated system of accessories, comfortable DuraFlex belts, 

swivel joint connection. 


06123 size S/M 152.50 

06124 size L/XL 152.50 

Manyard fastener with shock absorber 

Tested for sharp edges, swivable design for greater freedom of movement, safety clip for attachment to safety harness, length 2 

m, 63 mm scaffold hook. Approved for horizontal use (anchoring point at foot height). Proprietary, innovative fastener with shock 

absorber. Teflon-coated (longer service life) 


06126 2.000 59.00 

AGU30 safety harness 

Front and back fall-arrest eyelets, extension of back eyelet tested for sharp edges, quick-release fasteners, size adjustable. 


06125 65.00 

PVC tool bag (red) 

27 cm x 50 cm (D x L). 


06130 21.50 

Fastener with shock absorber 

Tested for sharp edges, 12 mm kernmantle rope, 63 mm scaffold hook, length 2 m. 

Approved for horizontal use (anchorage point at foot height). Proprietary innovative fastener with shock absorber safety package. 

EN354 + EN355 + EN1891 


06128 2.000 65.00 


Work safety 

Standard set 

AGU30 safety harness with fixed back eyelet extension, Manyard fastener with shock absorber and tool bag 


06122 139.00 

Scorpion fall arrester 

Tested for sharp edges, approved for horizontal use (anchoring point at foot height), quick-release braking system, stops fall within 

only few centimetres, compact and light, length 2.70 m, corrosion-resistant material, belt teflon-coated (longer service life). 3 

models with various snap hook combinations. 


06127 2.700 169.00 

Tool bag (without illustration) 

To carry ratchet spanner and hammer, for direct clip-on to Revolution safety harness. 


06129 12.80 

IKAR HWPS 18 fall protection device 

With 18 m rope, blue plastic housing, rotary swivel with IKV 08. 


06180 Safety device for horizontal and 

vertical use. Working length 15 

metres, steel cable tested for 

sharp edges. 

337.50 

IKAR rescue set ABS 3 WH 

With 20 m rope, 1 IK AB 100, 1 IKV 13, 1 telescopic rod, 1 carrier bag (41-RSET/20). 

Part No. Length m Weight approx. kg Price €E/each for order volume of: price per piece 

06184 20.000 6.200 629.00 

06186 20.000 without telescopic bar 5.690 554.00 

06185 40.000 6.200 677.50 

06187 40.000 without telescopic bar 5.690 601.50 

Miller helmet 

With chin strapping, red, with industrial approval as per EN397. 


06134 red 59.00 


FAX 

Please copy this form, fill in the copy and send it by fax to the following no.: +49 2331 4709-222 

Company: 

Place / date 

Purchaser 

Purchase order no. 

Customer code 

Person in charge 

m ORdER 

m Please send order confirmation by post m / by fax m 

m ENqUiRY 

m Please send offer by post m / by fax m 

Description Part no. Quantity Price per unit E Total E 

Total order volume E 

Date of delivery 

Shipping method 

Delivery address: 

This order is placed under acceptance of the known conditions 

of sale and delivery. Goods supplied for this order remain your 

property until such time as all accounts have been settled. 

This order becomes only valid on written confirmation by 

scafom-rux GmbH. Contract conclusions and other agreements, 

in particular all subsidiary agreements and assurances 

made by our sales representatives, are only binding upon 

receipt of our written confirmation. 

Delivery conditions 

Payment conditions 

Packing charges 

Responsible Sales Contact 

Signature customer 

scafom-rux GmbH · Neue Straße 7 · DE-58135 Hagen · Phone +49 2331 4709-0 · Fax +49 2331 4709-202 · Mail rux@rux.de · Internet www.rux.de 

Managing director Volker Rux · HRB 4435 Amtsgericht Hagen · EC tax no. DE 813 733 780 · Local tax no. 321/5798/1436 

Please copy this form, fill in the copy and send it by fax to the following no.: +49 2331 4709-222

GENERAL TERMS OF SALES ANd dELivERY 

General terms of sales and delivery of scafom-rux GmbH, Neue Straße 7, dE-58135 Hagen 

1. Conclusion of contract 

1.1 These general conditions of sale and delivery apply to all present and future contracts provided they are not amended or excluded without our express written agreement. Conditions of the purchaser are not 

binding even when, after receipt of the contract, we do not expressly reject such conditions. 

1.2 Our quotations are submitted without obligation. Contract conclusions and other agreements, in particular all subsidiary agreements and assurances made by our sales representatives, are only binding upon receipt of our written 

confirmation. 

2. Prices 

2.1 The prices provide for delivery ex works or depot plus freight, packing and value added tax (domestic business only) at the rates prevailing. 

2.2 In the event that our cost prices increase for reasons beyond our control (e.g. new regulations imposed by the authorities) or such items as freight, taxes or fees are introduced or increased after conclusion of the contract, we are 

entitled to amend our prices accordingly. In the case of an incommensurate price increase, the purchaser has the right to withdraw from the contract. A price increase amounting to 20% of the agreed purchase price or less, not 

including value added tax, is deemed to be reasonable. A lump sum administration fee of EUROS 20.00 will be charged on sales below our minimum order value of EUROS 50.00. 

3. Payment 

3.1 Payment of the purchase price shall be made within the agreed period in cash, without deduction, or by remittance to our account, irrespective of the receipt of the goods and without prejudice to the right of claim, and excluding 

set-off against disputed or not legally binding accounts receivable. Withholding of payments is illegal. If the purchaser is a non-trader, then he is entitled to withhold payment to the extent that such entitlement is based on the same 

contractual relationship. 

3.2 In the event of delayed payment by the purchaser, we are entitled to charge interest in accordance with the rate of our house bank for overdraft facilities, at least, however, interest at 8% above the basic interest rate of the Federal 

German Bank, plus value added tax. We reserve the right to claim for any additional contractual losses. 

3.3 All receivables become due immediately, irrespective of the due date of received and credited bills, when the purchaser delays remittance of a due payment to us for longer than 10 days. The same applies when 

the purchaser files a petition in bankruptcy or becomes distressed. We are also entitled to supply outstanding consignments on cash-in-advance terms only and withdraw from the contract after a reasonable 

period of time or demand damages for non-fulfilment. We have the right to prohibit the resale of the goods, demand their return or transfer of constructive possession, at the cost of the purchaser, and also revoke the authorization 

to collect as per § 6.4. We are entitled, in the aforementioned cases to set foot on the premises of the purchaser, seize the goods, sell them privately at the best possible price and set off the amount against the unsettled purchase 

price receivables, less costs incurred. 

3.4 In the case of seizure of material by us, we are entitled to take over goods at the market value. The purchaser pledges to assign his title of the goods to us. 

4. Delivery period, delivery dates 

4.1 The delivery date is not binding. Delay in delivery is deemed to exist when the agreed delivery date is exceeded intentionally or in a grossly negligent manner by more than 2 months. 

4.2 lf we are late in delivering, the purchaser is entitled to set a reasonable time extension in writing. After expiry of the time extension, the purchaser is entitled to withdraw from the contract, but only to the extent that deliveries have 

not been expedited within the extension period. Claims for damages by reason of slight negligence are excluded. 

5. Act of God and other hinderances act preventing delivery 

We are entitled, in the event of acts of God, to defer delivery for the duration of the disruption and a reasonable restart period or to withdraw partly or completely from the contract for the part which has not 

been fulfilled. Acts of God are deemed as being labour disputes, mobilization, war, blockade, import and export embargos, shortages of raw materials and fuels, fire, transportation blockages, factory or transport 

disturbances and other circumstances beyond our control irrespective of whether they occur at our promises or at those of subcontractors. 

6. Retention of title 

6.1 All goods supplied remain our property (goods subject to retention of title) until such time as all accounts have been settled, notwithstanding legal considerations and including future or contingent receivables 

resulting from contracts concluded at the same time or contracts concluded at a later date. This also applies to payments made against specifically designated accounts receivable. In the event that the amount of the assigned 

receivables and/or the goods subject to retention of title considerably exceed the remaining outstanding amount, we are obliged, at the request of the purchaser, to relinquish a part of the retention of title and/or release a part of 

the assigned receivables emanating from a resale. Considerable is deemed to be a difference between outstanding amount and security of more than 20%. In this case, the purchaser is obliged to mark the scaffolding material in 

his possession such that the material which is still our property can, if necessary, be identified without doubt. In the event that an assignment of accounts receivable is relinquished, the purchaser is obliged to disclose beforehand 

all receivables resulting from the sale of scaffolding material. 

6.2 The purchaser may sell the goods subject to retention of title only within the framework of normal business and in accordance with normal terms of sale, and as long as he is not in default, provided the accounts receivable resulting 

from the resale as per § 3 to 5 are passed on to us. The purchaser is not entitled to dispose of the goods subject to retention of title in any other manner. 

6.3 The purchaser’s accounts receivable resulting from resale of the goods subject to retention of title are now already assigned to us. They serve as surety to the same extent as the goods subject to retention of title themselves. In the 

event that the goods are resold by the purchaser together with other goods not sold by us, then the assignment of the accounts receivable resulting from the resale only applies to the value of the goods sold. 

6.4 The purchaser is entitled to collect receivables resulting from the resale until such time as we revoke the contract. We shall only exercise our right to revoke in the three cases mentioned in § 3. The purchaser is only entitled to assign 

accounts receivable after having previously received our express written consent. The purchaser is obliged, upon our demand, to advise his clients of the assignment to us immediately - unless we do not do this ourselves - and 

provide us with the necessary credit information and documents for collection. 

6.5 In the event that we exercise our right of retention of title, this shall only be deemed to be a withdrawal from the contract when we expressly declare same in writing. The right of ownership of the purchaser to the goods subject to 

retention of title ceases to exist when his obligations in respect of this or another contract are not fulfilled. 

6.6 All rights resulting from the retention of title, and the special forms thereof laid down in these conditions of sale and delivery, shall remain in force up to the time of complete release, also from eventual liabilities into which we have 

entered in the interest of the purchaser. 

7. Despatch, passing of risk, partial deliveries, continuous deliveries 

7.1 Provided, no other agreement has been made in writing, we determine route and means of despatch, as well as the forwarder and carrier. 

7.2 Goods ready for shipment must be called off immediately, otherwise we are entitled to either despatch them at the risk, and cost, of the purchaser or to store at our discretion and invoice immediately in accordance with the terms of 

payment agreed for the transaction. 

7.3 The goods are normally delivered unpacked and not protected against rust. On material which is packed, the purchaser is obliged to unpack and dispose of the packing material at his cost. 

7.4 The risk is passed on all transactions, including that of confiscation, to the purchaser when the goods are handed over to a forwarding agent or carrier at the latest, however, on leaving the warehouse or the 

supplying factory. 

7.5 In the event of defects on goods supplied, such goods shall still be accepted by the purchaser without prejudice to any eventual rights, provided we have not caused such defects through gross negligence. 

7.6 Insurance cover is only taken out at the request of and for account of the purchaser. 

8. Notification of defects and warranty 

We are liable for defects and defictive title as follows: 

8.1 The point of time at which the risk passed to the purchaser is decisive for the contractual condition of the goods. 

8.2 The purchaser is obliged to thoroughly inspect the goods immediately upon receipt using the facilities he has available. The purchaser shall notify the vendor in writing of any defects established. 

8.3 In the event of justified claims for defects, the vendor shall take back the defective goods and replace them with goods of perfect condition, otherwise we are entitled to refund the undervalue or refurbish the goods thereby reasonably 

safeguarding the interests of the purchaser. 

8.4 If we do not fulfil our obligations to refurbish or supply replacements within the set time limit or in accordance with the contract, the purchaser is entitled to cancel the contract or reduce the purchase price of the goods. 

8.5 If the purchaser does not immediately give us the opportunity of inspecting the goods or does not put samples of the faulty goods immediately at our disposals upon request, then all claims for warranty will be 

automatically forfeited. 

8.6 The right of the purchaser to enforce claims for warranty expires one month after written rejection of the notification of defects by the vendor, at the latest 12 months from the date of delivery. 

9. Limitation of liability 

9.1 Claims not expressly conceded in these conditions of sale and delivery, in particular claims for damages resulting from breach of duty, impossibility, default, violation of contractual secondary obligations, wrongful act - also as far as 

such claims are tied up with the warrantyrights of the purchaser - are excluded unless we are pre-emptorily liable in case of gross negligence or malice. Liability for consequential damages as a result of defects is excluded to the 

extent that such liability is not included in the statutory provisions of product liability. 

9.2 All claims which are not warranty claims for defective goods expire, irrespective of legal considerations, at the latest 1 year after the passing of risk to the purchaser if the statutory limitation period is not shorter. 

9.3 Liability of any kind on our part for damages and consequential damages is excluded if the delivered goods are stored and processed or used competently and appropriately. This does not apply when the buyer 

furnishes proof that a damage is not due to incompetent and inappropriate storage, processing or use. Part of the competent and appropriate storage for wooden materials is e. g. their ventilation. A competent and appropriate handling 

of the goods during the erection and disassembly of scaffolds requires the observation of all prescribed regulations of technology, including the DIN standards and maintaining all qualification requirements and statical standards. 

10. Place of performance, place of jurisdiction and law applicable. 

10.1 Place of performance for our ex-works deliveries is the supplying factory, otherwise for all other deliveries our depot. Place of jurisdiction is Hagen. 

10.2 Should the purchaser infringe any of the laws on turnover tax, in particular in respect of information on the turnover tax ID number, the purchaser is obliged to compensate us for any loss we may incur as a result. We reserve the 

right of assertion of claims for additional damage. 

10.3 Should a part of these conditions of sale and delivery prove to be inoperative or void, the effectiveness of the remaining conditions will not be affected. In such case, and as far as legally possible and admissible, the non-operative 

or void clause is to be replaced or supplemened in such a manner that the intended purpose of the non-operative clause, namely to safeguard commercial interests, is achieved. 

RUX GmbH · Neue Straße 7 · D-58135 Hagen · Germany · Fon: +49 (0) 2331 47 09-0 · Fax: +49 (0) 2331 47 09-202 · www.scafom-rux.de · info@scafom-rux.de 

Geschäftsführer: Volker Rux · HRB 4435 · Amtsgericht Hagen · Ust.-Id.-Nr. DE 813 733 780 · St.-Nr. 321/5784/0172

Scafom-rux Deutschland 

Neue Straße 7 

58135 Hagen 

Germany 

T +49 (0) 2331 4709-0 

F +49 (0) 2331 4709-202 

info@scafom-rux.de 

Scafom-rux has a significant business 

presence in the following countries: 

Belgium, Canada, Chile, China, Czech Republic, 

Germany, France, Great Britain, Netherlands, 

Peru, Poland, Portugal, Romania, Spain, 

Turkey and the USA. 

www.scafom-rux.de 

Price listNon-system ACCESSORIES Subject to change without notice. Errors and ommissions excepted.

Non-system - Rux GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?