Material Safety Data Sheet - Brillux

Material Safety Data Sheet 

according to Regulation (EC) 1907/2006 

Product name : Floortec 2K-Epoxi-Grund LF 832 (Komponente A) 

Floortec 2C Epoxy Primer LF 832 (Component A) 

Revision : 25.06.2013 Version (Revision) : 8.0.0 (7.0.0) 

Print date : 25.06.2013 

1. Identification of the substance/mixture and of the company/undertaking 

1.1 Product identifier 

Floortec 2K-Epoxi-Grund LF 832 (Komponente A) 


1.2 Relevant identified uses of the substance or mixture and uses advised against 

Coating compound / Surface coating / paint. 

There are no information about relevant identified uses of the product, which are advised against. 

1.3 Details of the supplier of the safety data sheet 

Manufacturer/Supplier : 

Brillux GmbH & Co KG 

www.brillux.de 

Street/P.O.Box : Weseler Straße 401 

Country code/Postal 

D - 48163 Münster 

code/Town/City : 

Telephone : +49 (0)251-7188-0 

Telefax : +49 (0)251-7188-280 

Contact : 

1.4 Emergency telephone number 

Outside the business hours: 

(Giftnotruf Berlin, consultation in the german and english language) 

Telephone: +49 (0)30 30686 790. 

2. Hazards identification 

E-Mail-Adresse der sachkundigen Person für Sicherheitsdatenblätter: 

sdb@brillux.de. 

2.1 Classification of the substance or mixture 

Directive 67/548/EEC or 1999/45/EC 

Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. · May cause sensitization by skin 

contact. · Irritating to eyes and skin. 

N ; R 51/53 · R 43 · Xi ; R 36/38 

Regulation (EC) No 1272/2008 (GHS) 

Causes skin irritation. · May cause an allergic skin reaction. · Causes serious eye irritation. · Toxic to aquatic life with long lasting 

effects. 

Eye Irrit. 2 ; H319 · Aquatic Chronic 2 ; H411 · Skin Irrit. 2 ; H315 · Skin Sens. 1 ; H317 

2.2 Label elements 


Danger symbol and danger designation 

Xi ; Irritant 

N ; Dangerous for the environment 

Hazard-determining components of labelling 

REACTION PRODUCT: BISPHENOL A-(EPICHLORHYDRIN), EPOXY RESIN (NUMBER AVERAGE MOLECULAR WEIGHT






Print date : 25.06.2013 

C12-C14-ALKYLGLYCIDYLETHER ; CAS-No. : 68609-97-2 

R-phrases 

51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 

43 May cause sensitization by skin contact. 

36/38 Irritating to eyes and skin. 

S-phrases 

28.1 After contact with skin, wash immediately with plenty of water. 

61 Avoid release to the environment. Refer to special instructions / safety data sheet. 

2 Keep out of the reach of children. 

37/39 Wear suitable gloves and eye/face protection. 

46 If swallowed, seek medical advice immediately and show this container or label. 

26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 

23.3 Do not breathe vapour. 

24 Avoid contact with skin. 

Special designation for certain preparations 

92 Contains epoxy constituents. See information supplied by the manufacturer. 


Hazard pictograms 

Environment (GHS09) · Exclamation mark (GHS07) 

Signal word 

Warning 








Print date : 25.06.2013 

3.2 Mixtures 

Chemical characterization 

Paint based on epoxy resin. 

Hazardous components 







Print date : 25.06.2013 

Possible symptoms: Irritation of the skin and the eyes. Allergic symptoms. 

4.3 Indication of any immediate medical attention and special treatment needed 

None. 

5. Firefighting measures 

5.1 Extinguishing media 

Suitable extinguishing media 

Adapt extinguishing measures to suit the environment. 

5.2 Special hazards arising from the substance or mixture 

None. 

5.3 Advice for firefighters 

No special measures required. 

5.4 Additional information 

Cool endangered containers with water in case of fire. 

6. Accidental release measures 

6.1 Personal precautions, protective equipment and emergency procedures 

Keep no protective persons away, personal should wear protective clothings. 

6.2 Environmental precautions 

Do not empty into drains. If the product contaminates lakes, rivers or sewages, inform appropriate authorities in accordance with 

local regulations. 

6.3 Methods and material for containment and cleaning up 

Absorb with liquid-binding material (sand, diatomite, acid-binders, universal binders, sawdust). Dispose of contaminated material as 

waste according to section 13. 

Phrase P391: Collect spillage. 

6.4 Reference to other sections 

None. 


You find information about the safety equipment of persons in the section 8, information about the refuse disposal in section 13. 

7. Handling and storage 

7.1 Precautions for safe handling 

Information for safe handling 

Ensure a good ventilation in room and working area. For personal protection see Section 8. 

Immediately change the protective clothing which are contaminated or damaged and wash the skin away with water. By mixing 

the components slowly, the container have to cover the product container to reduce the splashing danger. Working carefully and 

slowly when decanting the mixture in another container. 

Phrase P102: Keep out of reach of children. 

Phrase P103: Read label before use. 

Phrase P262: Do not get in eyes, on skin, or on clothing. 

Information about protection against explosions and fires 

No special precautionary measure necessary. 

7.2 Conditions for safe storage, including any incompatibilities 

Requirements to be met by storerooms and containers 

No particular measures required. 

Phrase P405: Store locked up. 

Information about separation of incompatible products 

Page : 4 / 9 

( EN / D )






Print date : 25.06.2013 

Store away from foodstuffs. 

Further information about storage conditions 

Store containers tightly closed in a cool well ventilated place. Keep only in the original container. 

Storage class : 10 

7.3 Specific end use(s) 

Coating material as a primer in Floortec PUR Coating System for exterior use and, under Floortec 2C Epoxy Thick Layer LF 834, for 

interior use. In combination with Floortec Quartz Sand 1526 also usable as scratch, shrink hole and compensation filler as well as 

flow coating. Can also be used for gluing suitable groove profiles or for manual production of grooves. 

8. Exposure controls/personal protection 

8.1 Control parameters 

None. 

8.2 Exposure controls 

Personal protective equipment 

General protective and hygiene measures 

Keep away from food, drink and animal feeding stuff. Immediately remove all contaminated clothing. Wash hands before breaks 

and after work. Avoid contact with eyes and skin. 

Respiratory protection 

Use suitable respiratory protective device in case of insufficient ventilation. When workers are facing concentrations above the 

exposure limit they must use appropriate certified respirators. Half mask with combination filter, class A1P2 minimum, or 

breathing mask with outer air supply. 

Do not inhale the vapour. 

Hand protection 

Use protective gloves based on nitrile-rubber. Following notes of the gloves-manufacturer. The choice of a suitable glove is 

dependent on the material and other quality characteristics which are different depending on manufacturer. Because the product 

is a preparation of several substances, the resistance of the glove materials have to be checked before use. The exact break 

trough time has to be found out by the manufactor of the protective gloves and has to be observed. 

Eye protection 

Use tightly fitting safety glasses. 

Body protection 

By working with epoxy resins a fitting protective clothing should be worn. To these clothes an additional protective clothing can 

be necessary, e. g. aprons, sleeve schooners, overcoats. 

By working with the product uncovered skin places have to be avoided also at warm weather. 

Additional information about engineering measures 

Observe data available of section 7. Provide adequate ventilation. Where reasonably practicable this shoud be achieved by the use 

of local exhaust ventilation and good general extraction. 

9. Physical and chemical properties 

9.1 Information on basic physical and chemical properties 

Image 

Form : 

Colour : 

Odour : 

Relevant safety data 

Liquid. 

According to product identification. 

characteristic 

Boiling temperature/boiling 

range: 

( 1013 hPa ) 200 °C 

Flash point: > 100 °C 

Ignition temperature: 184 °C 

Lower explosion limit: 1,3 Vol-% 

Page : 5 / 9 

( EN / D )






Print date : 25.06.2013 

Upper explosion limit: 13 Vol-% 

Vapour pressure: ( 20 °C ) 0,1 hPa 

Density: ( 20 °C ) ca. 1,14 g/cm 3 

Water solubility: ( 20 °C ) Not or littly mixable. 

VOC value : 

max. 

200 g/l 

9.2 Other information 

The mentioned VOC value refers to the mixture of the product, incl. harder, ready for use. 

10. Stability and reactivity 

10.1 Reactivity 

No dangerous reaction known. Particularly larger quantities of the 2C-Mixture material could get hot by the progressive polyaddition, 

if the mixture would not using. Carbon monoxide, carbon dioxide and nitric oxides could arise. 

10.2 Chemical stability 

Stable under recommended storage and handling conditions (see section 7). 

10.3 Possibility of hazardous reactions 

No dangerous reactions are known if stored and handled the product correctly. 

10.4 Conditions to avoid 

Keep away from frost, heat and direct sunlight. 

10.5 Incompatible materials 

No dangerous reaction known. 

10.6 Hazardous decomposition products 

No dangerous decomposition product are known if stored and handled correctly. 

11. Toxicological information 

11.1 Information on toxicological effects 

Acute toxicity: 

- Acute oral toxicity: No data available; 

- Acute dermal toxicity: No data available; 

- Acute inhalation toxicity: No data available. 

Primary irritant effect 

Reizwirkung: 

- Bei Hautkontakt: Reizt die Haut. 

- Bei Augenkontakt: Reizt dien Augen. 

Sensitization 

The product contains sensitizing substances, which may produce an allergic reaction (see section 2 and 3). 

Cancerogenic and mutagenic effects, risks to reproduction 

The product is not classified as human germ cell mutagenic, carcinogenic or human reproductive toxic (CMR effects). 

11.2 Experience on practice 

This product is unlikely to harm health, given normal and proper handling and hygenic precautions. 

11.3 Additional toxicological information 

The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for the 

Preparations as issued in the latest version: Irritant. 

12. Ecological information 

12.1 Toxicity 

Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. 

Other information 

Page : 6 / 9 

( EN / D )






Print date : 25.06.2013 

Remark: Toxic for fishes. 

12.2 Persistence and degradability 

These are not data availably about the potential of the product concerning his persistency and degradability. 

12.3 Bioaccumulative potential 

These are not data availably about the bio accumulation potential of the product. No information about the individual components is 

available either. 

12.4 Mobility in soil 

These are not datas availably about the potential of the product concerning his mobility in the ground. 

Due to the low water solubility of the product a bioavailability is not probable. 

A penetrating into soil, waters and sewage system should be prevented. 

12.5 Results of PBT and vPvB assessment 

This product does not contain any relevant substances which were classified as a PBT or vPvB-substance. 

12.6 Other adverse effects 

There are no data available on the product itself. 


Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water. Avoid exposing into ground, waterways and 

drainage. 

Danger of drinking water if even small quantities leak into soil. Harmful to aquatic organismen. 

13. Disposal considerations 

13.1 Waste treatment methods 

Recommendation 

Can be taken to a suitable incineration centre in oberservance of local regulations. Do not dispose together with household 

garbage. Do not allow product to reach sewage system. 

Waste key 

Disposal-definition No. (AVV-Code): 08 01 11* Paint and varnish waste which contains organic solvents or other dangerous 

substances. 

Contaminated packaging 


Contaminated packaging must be emptied of all residues and, following appropriate cleaning, may be sent to a recycling plant. 

Uncleaned packaging must be disposed of in the same manner as the medium. 

14. Transport information 

14.1 UN number 

3082 

14.2 UN proper shipping name 

ADR/RID 

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. ( EPOXIDE RESIN ) 

IMDG-Code 


ICAO-TI / IATA-DGR 


14.3 Transport hazard class(es) 

ADR/RID 

Class : 9 

Classification-Code : 

M6 

Kemlercode : 90 

Tunnel restriction code : 

E 

Special provisions : LQ 7 

Label : 

9 / N 

Page : 7 / 9 

( EN / D )






Print date : 25.06.2013 

IMDG-Code 

Class : 9 

EmS number : 

F-A / S-F 

Label : 

9 / N 


Class : 9 

Label : 

9 / N 

14.4 Packing group 

III 

14.5 Environmental hazards 

ADR/RID : N 

IMDG-Code : P 

ICAO-TI / IATA-DGR : N 

14.6 Special precautions for user 

None. 

15. Regulatory information 

Safety, health and environmental regulations/legislation specific for the substance or 

15.1 

mixture 

National regulatory information 

Regulation on safety management (BetrSichV) 

No flammable liquid according to BetrSichV. VbF-class (till 31.12.2002): The product is not subject to the ordinance. 

Water pollution classification 

Class : 2 according Self classification 

Other regulations 

The product is not classified as a solid substance according to the criteria of the Penetrometer test (ADR, part 2, section 2.3.4) 

and also fulfils not the criteria for solid substances according to the TRwS 779 number 2.1.1. 

International regulatory information 

In accordance to the EU guideline 2004/42/EC : 

Product sub-category and VOC limiting values in accordance with appendix II, letter A of the guideline: 

Category j, type Lb; 

VOC limiting value of the category for 2010: 500 g/l. 

This product contains max. 200 g/l VOC (preparation ready for use). 

15.2 Chemical safety assessment 

A chemical safety assessments was not carried out. 

16. Other information 

Further information 

Product code in accordance with GISBAU (hazardous materials information system of the German professional associations of the 

building and construction industry) for epoxy resin coating cloths (GISCODE): RE 1. 

R-Phrases of components 

20/22 Harmful by inhalation and if swallowed. 

21 Harmful in contact with skin. 

36/38 Irritating to eyes and skin. 

38 Irritating to skin. 


51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 

52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 

GHS Hazard statements of components 

H302 

Harmful if swallowed. 

Page : 8 / 9 

( EN / D )






Print date : 25.06.2013 

H312 

H315 

H317 

H319 

H332 

H411 

H412 

Harmful in contact with skin. 

Causes skin irritation. 

May cause an allergic skin reaction. 

Causes serious eye irritation. 

Harmful if inhaled. 

Toxic to aquatic life with long lasting effects. 

Harmful to aquatic life with long lasting effects. 

These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall 

not establish a legally valid contractual relationship. 

Page : 9 / 9 

( EN / D )



Product name : Floortec 2K-Epoxi-Grund LF 832 (Komponente B) 

Floortec 2C Epoxy Primer LF 832 (Component B) 


Print date : 01.07.2013 

1. Identification of the substance/mixture and of the company/undertaking 

1.1 Product identifier 

Floortec 2K-Epoxi-Grund LF 832 (Komponente B) 


1.2 Relevant identified uses of the substance or mixture and uses advised against 

Coating compound / Surface coating / paint. 

There are no information about relevant identified uses of the product, which are advised against. 

1.3 Details of the supplier of the safety data sheet 

Manufacturer/Supplier : 

Brillux GmbH & Co KG 

www.brillux.de 

Street/P.O.Box : Weseler Straße 401 

Country code/Postal 

D - 48163 Münster 

code/Town/City : 

Telephone : +49 (0)251-7188-0 

Telefax : +49 (0)251-7188-280 

Contact : 

1.4 Emergency telephone number 

Outside the business hours: 

(Giftnotruf Berlin, consultation in the german and english language) 

Telephone: +49 (0)30 30686 790. 

2. Hazards identification 

E-Mail-Adresse der sachkundigen Person für Sicherheitsdatenblätter: 

sdb@brillux.de. 

2.1 Classification of the substance or mixture 


Causes burns. · May cause sensitization by skin contact. · Harmful to aquatic organisms, may cause long-term adverse effects in 

the aquatic environment. · Harmful by inhalation, in contact with skin and if swallowed. 

C ; R 34 · R 43 · R 52/53 · Xn ; R 20/21/22 


Causes severe skin burns and eye damage. · Harmful if swallowed. · May cause an allergic skin reaction. · Harmful to aquatic life 

with long lasting effects. 

Aquatic Chronic 3 ; H412 · Acute Tox. 4 ; H302 · Skin Corr. 1B ; H314 · Skin Sens. 1 ; H317 

2.2 Label elements 


Danger symbol and danger designation 

C ; Corrosive 


BENZYL ALCOHOL ; CAS-No. : 100-51-6 

3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXYLAMINE ; CAS-No. : 2855-13-2 

R-phrases 

34 Causes burns. 



20/21/22 Harmful by inhalation, in contact with skin and if swallowed. 

S-phrases 

61 Avoid release to the environment. Refer to special instructions / safety data sheet. 

Page : 1 / 8 

( EN / D )






Print date : 01.07.2013 

1/2 Keep locked up and out of the reach of children. 

20 When using do not eat or drink. 

36/37/39 Wear suitable protective clothing, gloves and eye/face protection. 

45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where 

possible). 

26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 

9 Keep container in a well-ventilated place. 


Hazard pictograms 

Corrosion (GHS05) · Exclamation mark (GHS07) 

Signal word 

Danger 


BENZYL ALCOHOL ; CAS-No. : 100-51-6 

3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXYLAMINE ; CAS-No. : 2855-13-2 

Hazard statements 

H314 

Causes severe skin burns and eye damage. 

H302 


H317 


H412 


Precautionary statements 

P273 

Avoid release to the environment. 

P280 

Wear protective gloves/protective clothing/eye protection/face protection. 

P301/312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. 

P305/351/338 

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy 

to do. Continue rinsing. 

P304/340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. 

P303/361/353 

IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with 

water/shower. 

P501.1 Dispose of contents/container to approved disposal company or local collection. 

2.3 Other hazards 

None. 

3. Composition/information on ingredients 

3.2 Mixtures 

Chemical characterization 

Mixture based on components, which are called following, and other components. 

Hazardous components 

BENZYL ALCOHOL ; EC-No. : 202-859-9; CAS-No. : 100-51-6 

Percentage : 25 - 50 % 

Classification 67/548/EEC : Xn ; R20/22 

Classification 1272/2008 (CLP) : Acute Tox. 4 ; H302 Acute Tox. 4 ; H332 

3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXYLAMINE ; EC-No. : 220-666-8; CAS-No. : 2855-13-2 


Classification 67/548/EEC : C ; R34 R43 R52/53 Xn ; R21/22 

Classification 1272/2008 (CLP) : Skin Corr. 1B ; H314 Acute Tox. 4 ; H302 Acute Tox. 4 ; H312 Skin Sens. 1 ; H317 

Aquatic Chronic 3 ; H412 

Page : 2 / 8 

( EN / D )






Print date : 01.07.2013 

POLYAMINE-ADDUKT 


Classification 67/548/EEC : 

Xi ; R41 Xi ; R38 

Classification 1272/2008 (CLP) : Eye Dam. 1 ; H318 Skin Irrit. 2 ; H315 

For the wording of the listed risk phrases refer to section 16. 

4. First aid measures 

4.1 Description of first aid measures 

General 

In all cases of doubt, or when symptoms persist, seek medical attention. Instantly remove any clothing soiled by the product. 

Phrase P101: If medical advice is needed, have product container or label at hand. 

After inhalation 

Fresh air supply, go to doctor at complaints. 

After skin contact 

Wash away with soap and water and rinse. 

After eye contact 

Remove contact lenses, keep eyelids open. Rinse open eye immediately with plenty of running water. Seek medical adivce if 

complaint continues. 

After ingestion 

Rinse mouth with plenty of water. When swallowed immediately consult and show packing or label to physician. 

4.2 Most important symptoms and effects, both acute and delayed 

Possible symptoms: Irritation of the skin and the eyes. Allergic symptoms. 

4.3 Indication of any immediate medical attention and special treatment needed 

After ingestion there is a corrosive effect in the mouth room and throat as well as danger of the perforation of the gullet and the 

stomach. 

5. Firefighting measures 

5.1 Extinguishing media 

Suitable extinguishing media 

Adapt extinguishing measures to suit the environment. 

5.2 Special hazards arising from the substance or mixture 

None. 

5.3 Advice for firefighters 

When extinguishing fires, use breathing apparatus with an independent source of air. 

6. Accidental release measures 

6.1 Personal precautions, protective equipment and emergency procedures 

Keep no protective persons away, personal should wear protective clothings. 

6.2 Environmental precautions 

Do not empty into drains. If the product contaminates lakes, rivers or sewages, inform appropriate authorities in accordance with 

local regulations. 

6.3 Methods and material for containment and cleaning up 

Absorb with liquid-binding material (sand, diatomite, acid-binders, universal binders, sawdust). Dispose of contaminated material as 

waste according to section 13. Disposing of contaminated material as waste after section 13. Ensure adequate ventilation. 

6.4 Reference to other sections 

None. 

Page : 3 / 8 

( EN / D )






Print date : 01.07.2013 


See section 8 for the personal protection and section 13 for information about the waste disposal. 

7. Handling and storage 

7.1 Precautions for safe handling 

Information for safe handling 

Ensure a good ventilation in room and working area. For personal protection see Section 8. 

Immediately change the protective clothing which are contaminated or damaged and wash the skin away with water. By mixing 

the components slowly, the container have to cover the product container to reduce the splashing danger. Working carefully and 

slowly when decanting the mixture in another container. 

Phrase P102: Keep out of reach of children. 

Phrase P103: Read label before use. 

Phrase P262: Do not get in eyes, on skin, or on clothing. 

Information about protection against explosions and fires 

No special precautionary measure necessary. 

7.2 Conditions for safe storage, including any incompatibilities 

Requirements to be met by storerooms and containers 

No particular measures required. 

Phrase P405: Store locked up. 

Information about separation of incompatible products 

Store away from foodstuffs. 

Further information about storage conditions 

Store containers tightly closed in a cool well ventilated place. Keep only in the original container or in containers recommended by 

the manufacturer. 

Storage class : 8 

7.3 Specific end use(s) 

Hardenercomponent of the product Floortec 2C Epoxy Primer LF 832. 

8. Exposure controls/personal protection 

8.1 Control parameters 

None. 

8.2 Exposure controls 

Personal protective equipment 

General protective and hygiene measures 

Keep away from food, drink and animal feeding stuff. Immediately remove all contaminated clothing. Wash hands before breaks 

and after work. Avoid contact with eyes and skin. 

Respiratory protection 

Use suitable respiratory protective device in case of insufficient ventilation. When workers are facing concentrations above the 

exposure limit they must use appropriate certified respirators. Half mask with combination filter, class A1P2 minimum, or 

breathing mask with outer air supply. 

Do not inhale the vapour. 

Hand protection 

Use protective gloves based on nitrile-rubber. Following notes of the gloves-manufacturer. The choice of a suitable glove is 

dependent on the material and other quality characteristics which are different depending on manufacturer. Because the product 

is a preparation of several substances, the resistance of the glove materials have to be checked before use. The exact break 

trough time has to be found out by the manufactor of the protective gloves and has to be observed. 

Eye protection 

Use tightly fitting safety glasses. 

Body protection 

Page : 4 / 8 

( EN / D )






Print date : 01.07.2013 

By working with epoxy resins a fitting protective clothing should be worn. To these clothes an additional protective clothing can 

be necessary, e. g. aprons, sleeve schooners, overcoats. 

By working with the product uncovered skin places have to be avoided also at warm weather. 

Additional information about engineering measures 

Observe data available of section 7. Provide adequate ventilation. Where reasonably practicable this shoud be achieved by the use 

of local exhaust ventilation and good general extraction. 

9. Physical and chemical properties 

9.1 Information on basic physical and chemical properties 

Image 

Form : 

Colour : 

Odour : 

Relevant safety data 

Liquid. 

According to product identification. 

characteristic 

Boiling temperature/boiling 

range: 

( 1013 hPa ) 205 °C 

Flash point: 101 °C 

Ignition temperature: 380 °C 

Lower explosion limit: 1,3 Vol-% 

Upper explosion limit: 13 Vol-% 

Vapour pressure: ( 20 °C ) 0,1 hPa 

Density: ( 20 °C ) ca. 1 g/cm 3 

Water solubility: ( 20 °C ) consolute miscible 

VOC value : 

max. 

200 g/l 

9.2 Other information 

The mentioned VOC value refers to the mixture of the product, incl. harder, ready for use. 

10. Stability and reactivity 

10.1 Reactivity 

No dangerous reaction known. Particularly larger quantities of the 2C-Mixture material could get hot by the progressive polyaddition, 

if the mixture would not using. Carbon monoxide, carbon dioxide and nitric oxides could arise. 

10.2 Chemical stability 

Stable under recommended storage and handling conditions (see section 7). 

10.3 Possibility of hazardous reactions 

No dangerous reactions are known if stored and handled the product correctly. 

10.4 Conditions to avoid 

Keep away from frost, heat and direct sunlight. 

10.5 Incompatible materials 

No dangerous reaction known. 

10.6 Hazardous decomposition products 

No dangerous decomposition product are known if stored and handled correctly. 

11. Toxicological information 

11.1 Information on toxicological effects 

Acute toxicity: 

- Acute oral toxicity: No data available; 

- Acute dermal toxicity: No data available; 

Page : 5 / 8 

( EN / D )






Print date : 01.07.2013 

- Acute inhalation toxicity: No data available. 

Primary irritant effect 

Irritation: 


Sensitization 

The product contains sensitizing substances, which may produce an allergic reaction (see section 2 and 3). 

Cancerogenic and mutagenic effects, risks to reproduction 

The product is not classified as human germ cell mutagenic, carcinogenic or human reproductive toxic (CMR effects). 

11.3 Additional toxicological information 

Swallows strong etching effect of the mouth room and throat as well as danger of the perforation of the gullet and the stomach at. 

The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for the 

Preparations as issued in the latest version: harmful, corrosive, irritant. 

12. Ecological information 

12.1 Toxicity 

Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 

12.2 Persistence and degradability 

These are not data availably about the potential of the product concerning his persistency and degradability. 

12.3 Bioaccumulative potential 

These are not data availably about the bio accumulation potential of the product. No information about the individual components is 

available either. 

12.4 Mobility in soil 

These are not datas availably about the potential of the product concerning his mobility in the ground. 

Due to the low water solubility of the product a bioavailability is not probable. 

A penetrating into soil, waters and sewage system should be prevented. 

12.5 Results of PBT and vPvB assessment 

This product does not contain any relevant substances which were classified as a PBT or vPvB-substance. 

12.6 Other adverse effects 

There are no data available on the product itself. 


Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water. Avoid exposing into ground, waterways and 

drainage. 

Danger of drinking water if even small quantities leak into soil. Harmful to aquatic organismen. 

13. Disposal considerations 

13.1 Waste treatment methods 


Can be taken to a suitable incineration centre in oberservance of local regulations. Do not dispose together with household 

garbage. Do not allow product to reach sewage system. 

Waste key 

Disposal-definition No. (AVV-Code): 08 01 11* Paint and varnish waste which contains organic solvents or other dangerous 

substances. 

Contaminated packaging 


Contaminated packaging must be emptied of all residues and, following appropriate cleaning, may be sent to a recycling plant. 

Uncleaned packaging must be disposed of in the same manner as the medium. 

14. Transport information 

14.1 UN number 

Page : 6 / 8 

( EN / D )






Print date : 01.07.2013 

2289 

14.2 UN proper shipping name 

ADR/RID 

ISOPHORONEDIAMINE 

IMDG-Code 




14.3 Transport hazard class(es) 

ADR/RID 

Class : 8 

Classification-Code : 

C7 

Kemlercode : 80 

Tunnel restriction code : 

E 

Special provisions : LQ 7 

Label : 8 

IMDG-Code 

Class : 8 

EmS number : 

F-A / S-B 

Label : 8 


Class : 8 

Label : 8 

14.4 Packing group 

III 

14.5 Environmental hazards 

ADR/RID : - 

IMDG-Code : - 

ICAO-TI / IATA-DGR : - 

14.6 Special precautions for user 

None. 

15. Regulatory information 

Safety, health and environmental regulations/legislation specific for the substance or 

15.1 

mixture 

National regulatory information 

Regulation on safety management (BetrSichV) 

No flammable liquid according to BetrSichV. VbF-class (till 31.12.2002): The product is not subject to the ordinance. 

Water pollution classification 

Class : 2 according Self classification 

Other regulations 

The product is not classified as a solid substance according to the criteria of the Penetrometer test (ADR, part 2, section 2.3.4) 

and also fulfils not the criteria for solid substances according to the TRwS 779 number 2.1.1. 

International regulatory information 

In accordance to the EU guideline 2004/42/EC : 

Product sub-category and VOC limiting values in accordance with appendix II, letter A of the guideline: 

Category j, type Lb; 

VOC limiting value of the category for 2010: 500 g/l. 

This product contains max. 200 g/l VOC (preparation ready for use). 

15.2 Chemical safety assessment 

A chemical safety assessments was not carried out. 

Page : 7 / 8 

( EN / D )






Print date : 01.07.2013 

16. Other information 

Further information 

Product code in accordance with GISBAU (hazardous materials information system of the German professional associations of the 

building and construction industry) for epoxy resin coating cloths (GISCODE): RE 1. 

R-Phrases of components 

20/21/22 Harmful by inhalation, in contact with skin and if swallowed. 

20/22 Harmful by inhalation and if swallowed. 

21/22 Harmful in contact with skin and if swallowed. 

34 Causes burns. 

38 Irritating to skin. 

41 Risk of serious damage to eyes. 



GHS Hazard statements of components 

H302 

H312 

H314 

H315 

H317 

H318 

H332 

H412 


Harmful in contact with skin. 


Causes skin irritation. 


Causes serious eye damage. 

Harmful if inhaled. 


These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall 

not establish a legally valid contractual relationship. 

Page : 8 / 8 

( EN / D )

Material Safety Data Sheet - Brillux

Create successful ePaper yourself

Delete template?

Save as template?