Chemwatch Australian MSDS 4613-90 Dentsply Neacid

DENTSPLY NEACID
Chemwatch Material Safety Data Sheet
Issue Date: 26-Feb-2009 CHEMWATCH 4613-90
C9317EC
Version No:5
CD 2008/4 Page 4 of 6
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
government mandated or vendor recommended.
- Certified respirators will be useful for protecting workers from inhalation of particulates when properly selected and fit tested as part of a
complete respiratory protection program.
ENGINEERING CONTROLS
» - Local exhaust ventilation is required where solids are handled as powders or crystals; even when particulates are relatively large, a certain
proportion will be powdered by mutual friction.
- If in spite of local exhaust an adverse concentration of the substance in air could occur, respiratory protection should be considered.
Such protection might consist of:
(a): particle dust respirators, if necessary, combined with an absorption cartridge;
(b): filter respirators with absorption cartridge or canister of the right type;
(c): fresh-air hoods or masks.
Air contaminants generated in the workplace possess varying "escape" velocities which, in turn, determine the "capture velocities" of fresh
circulating air required to effectively remove the contaminant.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
White powder with a sour odour; mixes with water.
PHYSICAL PROPERTIES
Corrosive.
Acid.
Molecular Weight: Not Applicable
Boiling Range (°C): Not Applicable
Melting Range (°C): Not Available Specific Gravity (water=1): 2.1
Solubility in water (g/L): 278 g/L
pH (as supplied): Not Applicable
pH (1% solution):