HIGH ABUSE 4ft - Myers Power Products, Inc.
HIGH ABUSE 4ft - Myers Power Products, Inc.
HIGH ABUSE 4ft - Myers Power Products, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSP1<br />
4 ft Polycarbonate<br />
Surface Luminaire<br />
1/32T8<br />
1/40T12<br />
2/40BX<br />
DIMENSIONS<br />
4 7 / 8 "<br />
APPLICATIONS<br />
• Parks and Recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
FEATURES<br />
• Polycarbonate lens<br />
• Surface conduit standard<br />
• Tamperproof fasteners<br />
• Unitized power module<br />
• 16 gauge backpan<br />
4 1 / 2 "<br />
42"<br />
1 /4 " Dia. Mtg. Holes<br />
7 /8 " Dia. Knockout<br />
51"<br />
Side View<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity. Knockouts in each end allow<br />
for surface conduit and simplify row installation.<br />
LENS: One piece, UV stabilized, .187" thick polycarbonate lens. Lens<br />
has molded prisms for superior light distribution and completely covers<br />
backplate to leave no exposed metal. Tear out membrane in each<br />
end allows for surface conduit.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners, to pull housing up to ceiling,<br />
secure through captive cagenuts that are accessible without<br />
removing backpan from ceiling.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSP1 4 ft Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSP1-1/32T8-120-CWB-TX<br />
HSP1<br />
zSeries<br />
z HSP1<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
zLamp Type<br />
❑ 32T8 (1 max)<br />
❑ 40T12 (1 max)<br />
❑ 40BX (2 only)<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ABP<br />
Aluminum Backpan<br />
❑ SBP<br />
Stainless Steel Backpan (Painted)<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSP14-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSP2<br />
4 ft Polycarbonate<br />
Surface Luminaire<br />
2/32T8<br />
2/40T12<br />
4/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
9 1 / 2 "<br />
• Parks and recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
• Polycarbonate lens<br />
• Tamperproof fasteners<br />
• Unitized power module<br />
• 16 gauge backpan<br />
3 1 / 4 "<br />
50 1 / 2 "<br />
Side View<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, .187" thick polycarbonate lens.<br />
Lens has molded prisms for superior light distribution and completely<br />
covers backplate to leave no exposed metal.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
FASTENERS: Six stainless steel fasteners, to pull housing up to ceiling,<br />
secure through captive cagenuts that are accessible without<br />
removing backpan from ceiling.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSP2 4 ft Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSP2-2/32T8-120-ESB2-TX<br />
HSP2<br />
zSeries<br />
z HSP2<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 2<br />
❑ 4 (40BX Only)<br />
zLamp Type<br />
❑ 32T8 (2 max)<br />
❑ 40T12 (2 max)<br />
❑ 40BX (Must use ELB)<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ABP<br />
Aluminum Backpan<br />
❑ SBP<br />
Stainless Steel Backpan (Painted)<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSP24-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSP3<br />
4 ft. Polycarbonate<br />
Surface Luminaire<br />
3/32T8<br />
3/40T12<br />
DIMENSIONS<br />
9 1 / 2 "<br />
APPLICATIONS<br />
• Park and Recreation<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public Housing<br />
• Jails<br />
FEATURES<br />
• Injection molded<br />
• Surface conduit standard<br />
• Tamperproof fasteners<br />
• Unitized power module<br />
• 16 gauge backpan<br />
4 1 / 2 "<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die-formed 16 ga. cold rolled steel backplate<br />
provides strength and rigidity. Knockouts in each end allows for<br />
surface conduit and simplifies row installation.<br />
LENS: One piece, UV stabilized, .156" thick, injection molded polycarbonate<br />
lens. Lens has molded prisms for superior light distribution<br />
and completely covers backplate to leave no exposed metal. Tear<br />
out membrane in each end allows for surface conduit.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners, to pull housing up to ceiling,<br />
secure through captive cagenuts that are accessible without<br />
removing backpan from ceiling.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSP3 4 ft. Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSP3-3/32T8-120-ESB2-TX<br />
HSP3<br />
zSeries<br />
z HSP3<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Polycarbonate Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ SBN<br />
Stainless Steel Backpan (Polished)<br />
❑ SBP<br />
Stainless Steel Backpan (Painted)<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSP34-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HST2<br />
2 ft Polycarbonate<br />
Surface Luminaire<br />
2/17T8<br />
2/20T12<br />
2/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
8 1 / 4 "<br />
• Parks and recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
• Injection molded<br />
• Wet location standard<br />
• Tamperproof fasteners<br />
• 16 gauge backpan<br />
• Optional surface conduit box<br />
4 1 / 2 "<br />
26 1 / 4 "<br />
16"<br />
6 1 / 4 "<br />
1 /4 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, .125 minimum thickness, injection<br />
molded polycarbonate lens. Lens has molded prisms for superior<br />
light distribution and completely covers backplate to leave no<br />
exposed metal.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Four stainless steel fasteners, to pull housing up to<br />
ceiling.<br />
SURFACE CONDUIT BACKBOX: Optional 18 gauge cold rolled<br />
steel backbox to allow for surface conduit.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HST2 2 ft Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HST2-2/17T8-120-ESB2-TX<br />
HST2<br />
zSeries<br />
z HST2<br />
24" Nom. Length<br />
zLamp Count<br />
❑ 2<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ABP<br />
Aluminum Backpan<br />
❑ SBP<br />
Stainless Steel Backpan (Painted)<br />
❑ SCB<br />
Surface Conduit Backbox<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
6"<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
WITH SCB OPTION<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HST2-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HST4<br />
4 ft Polycarbonate<br />
Surface Luminaire<br />
2/32T8<br />
2/40T12<br />
DIMENSIONS<br />
4 1 / 2 "<br />
8 1 / 4 "<br />
APPLICATIONS<br />
• Parks and recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
FEATURES<br />
• Injection molded<br />
• Wet location standard<br />
• Tamperproof fasteners<br />
• 16 gauge backpan<br />
• Optional surface conduit box<br />
50 1 / 4 "<br />
21" 21"<br />
6 1 / 4 "<br />
1 /4 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, .125 minimum thickness, injection<br />
molded polycarbonate lens. Lens has molded prisms for superior<br />
light distribution and completely covers backplate to leave no<br />
exposed metal.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners, to pull housing up to ceiling.<br />
SURFACE CONDUIT BACKBOX: Optional 18 gauge cold rolled<br />
steel backbox to allow for surface conduit.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HST4 4 ft Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HST4-2/32T8-120-ESB2-TX<br />
HST4<br />
zSeries<br />
z HST4<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ABP<br />
Aluminum Backpan<br />
❑ SBP<br />
Stainless Steel Backpan (Painted)<br />
❑ SCB<br />
Surface Conduit Backbox<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
6 "<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
WITH SCB OPTION<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HST4-04 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSVC/S<br />
4 ft Vandal Resistant<br />
Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
1/48HO<br />
2/48HO<br />
DIMENSIONS<br />
6"<br />
APPLICATIONS<br />
• Parks and recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
FEATURES<br />
• Injection molded<br />
• Tamperproof fasteners<br />
• 16 gauge housing<br />
• Accepts surface conduit<br />
7 1 / 2 "<br />
7 1 / 2 "<br />
4 1 / 2 "<br />
HSVC<br />
HSVS<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed 16 gauge cold rolled steel housing<br />
provides strength and rigidity. Knockouts in each end allow<br />
through wiring.<br />
LENS: One piece, UV stabilized, .125 minimum thickness, injection<br />
molded, clear textured, polycarbonate lens. Lens is fully gasketed to<br />
housing to seal against contaminants.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without<br />
tools to facilitate service. AWM, TFN or THHN wire used throughout,<br />
rated for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners secure lens to housing.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSVC/S 4 ft Vandal Resistant Luminaire<br />
ORDERING INFORMATION<br />
Example: HSVC-2/32T8-120-ESB-TX<br />
HSV<br />
zSeries<br />
z HSV<br />
48" Nom. Length<br />
zMounting<br />
z C<br />
Corner<br />
z S<br />
Surface<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ 48HO (800Ma.)<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SCB<br />
Surface Conduit Backbox<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSVCS4-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW12<br />
2 ft Wraparound<br />
Surface Luminaire<br />
1/17T8<br />
2/17T8<br />
1/20T12<br />
2/20T12<br />
1/31FBO<br />
1/40BX<br />
DIMENSIONS<br />
5 1 / 4 "<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
5"<br />
25"<br />
18"<br />
3"<br />
3 /8 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
Side View<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Four stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from surface.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW12 2 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW12-16-2/17T8-15PP-120-ESB-TX<br />
HSW12<br />
zSeries<br />
z HSW12<br />
24" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 31FBO (1 max)<br />
❑ 40BX (1 max)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSW12-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW14<br />
4 ft Wraparound<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5 1 / 4 "<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
5"<br />
49"<br />
42"<br />
3"<br />
3 /8 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
Side View<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from surface.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW14 4 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW14-16-2/17T8-15PP-120-ESB-TX<br />
HSW14<br />
zSeries<br />
z HSW14<br />
48" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
HSW14-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW18<br />
8 ft Wraparound<br />
Surface Luminaire<br />
2/32T8<br />
4/32T8<br />
2/40T12<br />
4/40T12<br />
DIMENSIONS<br />
5 1 / 4 "<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• One piece 8ft. length<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power modules<br />
5"<br />
97"<br />
30" 30" 30"<br />
3"<br />
Side View<br />
3 /8 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens in<br />
two <strong>4ft</strong> sections.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to unitized<br />
power modules with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Twelve stainless steel fasteners secure lenses in<br />
place through captive cagenuts that are accessible without removing<br />
housing from surface.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW18 8 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW18-16-4/32T8-15PP-120-ESB-TX<br />
HSW18<br />
zSeries<br />
z HSW18<br />
96" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 2<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
HSW18-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW22<br />
2 ft Wraparound<br />
Surface Luminaire<br />
2/17T8<br />
2/20T12<br />
2/40BX<br />
DIMENSIONS<br />
9"<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
3"<br />
25"<br />
18"<br />
7"<br />
Side View<br />
3 /8 " Dia. Mtg. Holes<br />
7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Four stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW22 2 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW22-16-2/17T8-15PP-120-ESB-TX<br />
HSW22<br />
zSeries<br />
z HSW22<br />
24" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 2<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSW22-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW24<br />
4 ft Wraparound<br />
Surface Luminaire<br />
2/32T8<br />
2/40T12<br />
DIMENSIONS<br />
9"<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
3"<br />
49"<br />
42"<br />
7"<br />
Side View<br />
3 /8 " Dia. Mtg. Holes<br />
7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW24 4 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW24-16-2/32T8-15PP-120-ESB-TX<br />
HSW24<br />
zSeries<br />
z HSW24<br />
48" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSW24-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW2x6<br />
6 ft Wraparound<br />
Surface Luminaire<br />
4/25T8<br />
4/30T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
3"<br />
9"<br />
• Jails<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Educational facilities<br />
• Outdoor canopies<br />
• V shaped wireway prevents lamp<br />
breakage<br />
• 8 tamperproof fasteners secure<br />
lens<br />
• Suitable for row mounting<br />
• UV stabilized polycarbonate lens<br />
• Unitized power module<br />
• Luminaire optical efficiency:<br />
60.7%<br />
73"<br />
73"<br />
9"<br />
Side View<br />
7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: Two piece, UV stabilized, clear K-12 polycarbonate lens.<br />
Lens joining band attaches to housing.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW2x6 6 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW2x6-16-4/25T8-15PP-120-ESB-TX<br />
HSW2x6<br />
zSeries<br />
z HSW2x6<br />
72" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 4<br />
zLamp Type<br />
❑ 25T8<br />
❑ 30T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSW2x6-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW2x8<br />
8 ft Wraparound<br />
Surface Luminaire<br />
4/32T8<br />
4/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
3"<br />
9"<br />
• Jails<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Educational facilities<br />
• Outdoor canopies<br />
• V shaped wireway prevents lamp<br />
breakage<br />
• 8 tamperproof fasteners secure<br />
lens<br />
• Suitable for row mounting<br />
• UV stabilized polycarbonate lens<br />
• Unitized power module<br />
• Luminaire optical efficiency:<br />
60.7%<br />
97"<br />
97"<br />
9"<br />
Side View<br />
7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
Lens joining band attaches to housing.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Twelve stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW2x8 8 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW2x8-16-4/32T8-15PP-120-ESB-TX<br />
HSW2x8<br />
zSeries<br />
z HSW2x8<br />
96" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSW2x8-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW3<br />
4 ft Wraparound<br />
Surface Luminaire<br />
3/32T8<br />
3/40T12<br />
DIMENSIONS<br />
12"<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
4 11 / 16 "<br />
49"<br />
42"<br />
7"<br />
Side View<br />
3 /8 " Dia. Mtg. Holes<br />
7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW3 4 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW3-16-3/32T8-15PP-120-ESB-TX<br />
HSW3<br />
zSeries<br />
z HSW3<br />
48" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSW34-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW42<br />
2 ft Wraparound<br />
Surface Luminaire<br />
4/17T8<br />
4/20T12<br />
2/31FBO<br />
2/40BX<br />
DIMENSIONS<br />
13 1 / 4 "<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws.<br />
• Unitized power module<br />
3 "<br />
25"<br />
18"<br />
7"<br />
Side View<br />
3 /8 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Four stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW42 2 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW42-16-4/17T8-15PP-120-ESB-TX<br />
HSW42<br />
zSeries<br />
z HSW42<br />
24" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 2<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 31FBO (2 max.)<br />
❑ 4OBX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSW42-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSW44<br />
4 ft Wraparound<br />
Surface Luminaire<br />
4/32T8<br />
4/40T12<br />
DIMENSIONS<br />
3"<br />
13 1 / 4 "<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
49"<br />
42"<br />
7"<br />
Side View<br />
3 /8 " Dia. Mtg. Holes<br />
7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed, cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSW44 4 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSW44-16-4/32T8-15PP-120-ESB-TX<br />
HSW44<br />
zSeries<br />
z HSW44<br />
48" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSW44-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSX22<br />
2 ft Polycarbonate<br />
Surface Luminaire<br />
1/17T8<br />
2/20T8<br />
2/40T12<br />
4/40BX<br />
DIMENSIONS<br />
4 1 / 4 "<br />
APPLICATIONS<br />
• Parks and recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
FEATURES<br />
• Polycarbonate lens<br />
• Tamperproof fasteners<br />
• Unitized power module<br />
• 16 gauge backpan<br />
6 3 / 4 "<br />
7 1 / 5 "<br />
26 1 / 2 "<br />
Side View<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, .187" thick polycarbonate lens.<br />
Lens has molded prisms for superior light distribution and completely<br />
covers backplate to leave no exposed metal.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
FASTENERS: Six stainless steel fasteners, to pull housing up to ceiling,<br />
secure through captive cagenuts that are accessible without<br />
removing backpan from ceiling.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSX22 2 ft Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSX22-2/32T8-120-ESB2-TX<br />
HSX22<br />
zSeries<br />
z HSX22<br />
24" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 4 (40BX Only)<br />
zLamp Type<br />
❑ 17T8 (2 max)<br />
❑ 20T12 (2 max)<br />
❑ 40BX (Must use ELB)<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ABP<br />
Aluminum Backpan<br />
❑ SBP<br />
Stainless Steel Backpan (Painted)<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSX22-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSX24<br />
4 ft Polycarbonate<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
2/40T12<br />
4/40BX<br />
DIMENSIONS<br />
4 1 / 4 "<br />
APPLICATIONS<br />
• Parks and recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
FEATURES<br />
• Polycarbonate lens<br />
• Tamperproof fasteners<br />
• Unitized power module<br />
• 16 gauge backpan<br />
6 3 / 4 "<br />
7 1 / 5 "<br />
50 1 / 2 "<br />
Side View<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, .187" thick polycarbonate lens.<br />
Lens has molded prisms for superior light distribution and completely<br />
covers backplate to leave no exposed metal.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
FASTENERS: Six stainless steel fasteners, to pull housing up to ceiling,<br />
secure through captive cagenuts that are accessible without<br />
removing backpan from ceiling.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSX24 4 ft Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSX24-2/32T8-120-ESB2-TX<br />
HSX24<br />
zSeries<br />
z HSX24<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 4 (40BX Only)<br />
zLamp Type<br />
❑ 32T8 (2 max)<br />
❑ 40T12 (2 max)<br />
❑ 40BX (Must use ELB)<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ABP<br />
Aluminum Backpan<br />
❑ SBP<br />
Stainless Steel Backpan (Painted)<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSX24-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
2/17T8<br />
2/20T12<br />
HWM2<br />
2 ft High Abuse<br />
Wall Luminaire<br />
DIMENSIONS<br />
3 7 / 16 "<br />
7 5 / 8 "<br />
3 3 / 8 "<br />
APPLICATIONS<br />
• Parks and recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
FEATURES<br />
• Direct/Indirect light<br />
• Seperate switching<br />
• Divided compartments<br />
2 3 / 32 "<br />
Cross Section<br />
18 3 / 4 "<br />
13 13 / 16 "<br />
7 /8 " Knockout 5 /16 " Dia. Mtg. Holes<br />
End Sections<br />
Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, cold rolled steel housing and end caps, with<br />
lapped and spot welded seams. Knockouts in each end allow for<br />
surface conduit and simplifies row installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
END CAP/LENS RETENTION: Die formed steel end caps held in<br />
place with two tamperproof fasteners.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HWM2 2 ft High Abuse Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: HWM2-16-1/17T8-12PP-120-ESB-TX<br />
HWM2<br />
zSeries<br />
z HWM2<br />
24" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 18<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ RSW<br />
Rocker Switch<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HWM2-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
2/32T8<br />
2/40T12<br />
4 ft High Abuse<br />
Wall Luminaire<br />
HWM4<br />
DIMENSIONS<br />
3 7 / 16 "<br />
7 5 / 8 "<br />
3 3 / 8 "<br />
APPLICATIONS<br />
• Parks and recreational<br />
facilities<br />
• Transit platforms<br />
• Psychiatric units<br />
• Public housing<br />
• Jails<br />
FEATURES<br />
• Direct/indirect light<br />
• Seperate switching<br />
• Divided compartments<br />
• Polycarbonate lens<br />
2 3 / 32 "<br />
Cross Section<br />
48 3 / 4 "<br />
36"<br />
End Sections<br />
7 /8 " Knockout<br />
Rear View<br />
Mounting Dimple:<br />
2 Required<br />
SPECIFICATIONS<br />
HOUSING: Die formed, cold rolled steel housing and end caps, with<br />
lapped and spot welded seams. Knockouts in each end allow for<br />
surface conduit and simplifies row installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
END CAP/LENS RETENTION: Die formed steel end caps held in<br />
place with two fasteners.<br />
BALLAST: Class P, energy saving two ballast standard. Sound rating<br />
A, CBM/ETL certified. UL listed.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HWM4 4 ft High Abuse Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: HWM4-16-2/32T8-12PP-120-ESB-TX<br />
HWM4<br />
zSeries<br />
z HWM4<br />
48" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 18<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ RSW<br />
Rocker Switch<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HWM4-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HWW2<br />
2 ft Wraparound<br />
Wall Luminaire<br />
1/17T8<br />
2/17T8<br />
1/20T12<br />
2/20T12<br />
1/31FBO<br />
1/40BX<br />
2/60I<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
5 1 / 4 "<br />
25"<br />
18"<br />
3"<br />
Top View<br />
3 /8 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Four stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HWW2 2 ft Wraparound Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: HWW2-16-2/17T8-15PP-120-ESB-TX<br />
HWW2<br />
zSeries<br />
z HWW2<br />
24" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 31FBO (1 max)<br />
❑ 40BX (1 max)<br />
❑ 60I<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HWW2-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HWW3<br />
3 ft Wraparound<br />
Wall Luminaire<br />
1/25T8<br />
2/25T8<br />
1/30T12<br />
2/30T12<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
5 1 / 4 "<br />
3"<br />
37"<br />
30"<br />
Top View<br />
3 /8 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HWW3 3 ft Wraparound Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: HWW3-16-2/25T8-15PP-120-ESB-TX<br />
HWW3<br />
zSeries<br />
z HWW3<br />
36" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 25T8<br />
❑ 30T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HWW3-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HWW4<br />
4 ft Wraparound<br />
Wall Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
5 1 / 4 "<br />
3"<br />
49"<br />
42"<br />
Top View<br />
3 /8 " Dia. Mtg. Holes 7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HWW4 4 ft Wraparound Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: HWW4-16-2/32T8-15PP-120-ESB-TX<br />
HWW4<br />
zSeries<br />
z HWW4<br />
48" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 20<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HWW4-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HRF15<br />
15" Square<br />
Recessed Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD1/2<br />
8QD<br />
2/28QD<br />
1/38DD<br />
1/150I<br />
DIMENSIONS<br />
14 1 / 4 "<br />
APPLICATIONS<br />
• Schools<br />
• Shopping centers<br />
• Hotels & motels<br />
• Public housing<br />
• Park and rec. facilities<br />
• Transit stations<br />
FEATURES<br />
• 14 Gauge cold rolled steel door<br />
• 18 Gauge cold rolled steel housing<br />
• Energy efficient<br />
• Tamperproof screws<br />
8"<br />
11 1 / 2 "<br />
14 5 / 8 " sq. opening<br />
15 3 / 8 "<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, die formed, 18 gauge, cold rolled steel housing<br />
and end caps.<br />
DOOR: One piece, 14 gauge, cold rolled steel door frame with die<br />
formed edges and tightly closed corners for increased rigidity.<br />
LENS: Lens to be specified.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
REFLECTOR: Designed for optical performance and finished in<br />
93% reflectance polyester powder coat.<br />
FASTENERS: Stainless steel tamperproof fasteners secure door to<br />
housing.<br />
GASKETING: Polyeurathane gasketing seals against outside contaminents.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HRF15 15" Square Recessed Luminaire<br />
ORDERING INFORMATION<br />
Example: HRF15-2/28QD-15PG/25CP-120-HPF-EBP<br />
HRF15<br />
zSeries<br />
z HRF15<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
Fluorescent<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
<strong>Inc</strong>andescent<br />
❑ 150I (1 max.)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
Fixture Side<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
Environment Side<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
Drop Lens<br />
❑ DPR<br />
Dropped Prismatic Polycarbonate<br />
Refractor<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HRF15FL-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
1x1<br />
HRR11<br />
High Abuse Recessed<br />
Flange Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Parks and recreational<br />
facilities<br />
• Psychiatric units<br />
• Public housing<br />
• Student dormitories<br />
• School locker rooms<br />
• Food preparation areas<br />
FEATURES<br />
• 19 gauge housing<br />
• Heavy gauge extuded<br />
aluminum door<br />
• Wet location listed<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
11 3 / 4 "<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling Cut Out Dims.<br />
10 13/16" x 12 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 19 gauge cold rolled steel housing<br />
with continuously tig welded seams to increase rigidity.<br />
DOOR: Heavy duty, anodized, extruded aluminum inset door frame<br />
with integral lens channel. Continuous gasketing integrates door<br />
frame and lens to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance. Piano hinge optional.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame, and perimeter of door to seal to<br />
housing.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides. Tamperproof fasteners optional.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
CCorporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HRR11 1x1 High Abuse Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
HRR11<br />
Example: HRR11-2/13TT-12PA-120-NPF-TX<br />
zSeries<br />
z HRR11<br />
1’ x 1’ Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
Fixture Side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12DRPA<br />
.125" DR Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 14DRPA<br />
.140" DR Prismatic Acrylic<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
Environment Side (Optional)<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF11<br />
Plaster Frame<br />
❑ PH<br />
Piano Hinge<br />
❑ MOD<br />
Specify Item<br />
zDoor Options<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HRR11-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSB88<br />
Polycarbonate<br />
Surface Luminaire<br />
1/9TT<br />
2/9TT<br />
1/13TT<br />
2/13TT<br />
1/13QD<br />
2/13QD<br />
1/75I<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Schools<br />
• Shower rooms<br />
• Hotels and motels<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Lobbies and vestibules<br />
FEATURES<br />
• Injection molded polycarbonate lens<br />
• Heavy gauge steel backplate<br />
• Tamperproof screws<br />
• Optional surface conduit box<br />
• Optional decorative visor for wall mount<br />
8 5 / 8 "<br />
8 5 / 8 "<br />
4 1 / 2 "<br />
5 7 / 8 "<br />
WITH SCB OPTION<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, injection molded polycarbonate<br />
lens has molded prisms for superior light distribution and completely<br />
covers backplate to leave no exposed metal.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Four stainless steel fasteners securely fasten lens to<br />
backplate.<br />
GASKETING: Closed cell neoprene gasketing creates a tight seal<br />
against contaminants and moisture.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
SURFACE CONDUIT BACKBOX: Optional 16 gauge cold rolled<br />
steel backbox to allow for surface conduit (required for some options<br />
and accessories). Bronze polyester powder finish.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations for ceiling mount and damp locations<br />
for wall mount.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSB88 Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSB88-1/13QD-120-HPF-GLR-TX<br />
HSB88<br />
zSeries<br />
z HSB88<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
Fluorescent<br />
❑ 9TT<br />
❑ 13TT<br />
❑ 13QD<br />
<strong>Inc</strong>andescent<br />
❑ 75I<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
zBallast<br />
❑ NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑ HPF<br />
High <strong>Power</strong> Factor<br />
❑ ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ ABP<br />
Aluminum Backplate<br />
❑ EBP<br />
Emergency Battery Pack (Requires SCB)<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ HV<br />
External Visor for Wall Mount<br />
❑ IAV<br />
Internal Asymmetric Visor<br />
❑ OPL<br />
Opal Polycarbonate Lens<br />
❑ PC120<br />
Photo Cell 120 Volt (Requires SCB)<br />
❑ PC277<br />
Photo Cell 277 Volt (Requires SCB)<br />
❑ SCB<br />
Surface Conduit Backbox<br />
❑ SPS<br />
Security On/Off Push Switch (Requires SCB)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSB88-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSB12<br />
Polycarbonate<br />
Surface Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
2/60I<br />
DIMENSIONS<br />
5 1 / 4 "<br />
12"<br />
APPLICATIONS<br />
• Schools<br />
• Shower rooms<br />
• Hotels and motels<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Lobbies and vestibules<br />
FEATURES<br />
• Injection molded polycarbonate lens<br />
• Heavy gauge steel backplate<br />
• Tamperproof screws<br />
• Optional surface conduit box<br />
• Optional decorative visor for wall mount<br />
12"<br />
6 5 / 8 "<br />
WITH SCB OPTION<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, injection molded polycarbonate<br />
lens has molded prisms for superior light distribution and completely<br />
covers backplate to leave no exposed metal.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Four stainless steel fasteners securely fasten lens to<br />
backplate.<br />
GASKETING: Closed cell neoprene gasketing creates a tight seal<br />
against contaminants and moisture.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
SURFACE CONDUIT BACKBOX: Optional 16 gauge cold rolled<br />
steel backbox to allow for surface conduit (required for some options<br />
and accessories). Bronze polyester powder finish.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSB12 Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSB12-2/26QD-120-HPF-GLR-TX<br />
HSB12<br />
zSeries<br />
z HSB12<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
Fluorescent<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
<strong>Inc</strong>andescent<br />
❑ 60I (2 max.)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ ABP<br />
Aluminum Backplate<br />
❑ EBP<br />
Emergency Battery Pack (Requires SCB)<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ HV<br />
External Visor for Wall Mount<br />
❑ IAV<br />
Internal Asymmetric Visor<br />
❑ OPL<br />
Opal Polycarbonate Lens<br />
❑ PC120<br />
Photo Cell 120 Volt (Requires SCB)<br />
❑ PC277<br />
Photo Cell 277 Volt (Requires SCB)<br />
❑ SCB<br />
Surface Conduit Backbox<br />
❑ SPS<br />
Security On/Off Push Switch (Requires SCB)<br />
❑ WL<br />
Wet label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSB12-04 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSB58<br />
Polycarbonate<br />
Surface<br />
Luminaire<br />
1/7TT<br />
2/7TT<br />
1/13QD<br />
1/75I<br />
DIMENSIONS<br />
5 5 / 8 "<br />
7 7 / 8 "<br />
4 1 / 8 "<br />
APPLICATIONS<br />
• Schools<br />
• Shower rooms<br />
• Hotels and motels<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Lobbies and vestibules<br />
FEATURES<br />
• Injection molded polycarbonate lens<br />
• Heavy gauge steel backplate<br />
• Tamperproof screws<br />
• Unitized power module<br />
5 1 / 2 "<br />
7 7 / 8 "<br />
WITH SCB OPTION<br />
SPECIFICATIONS<br />
BACKPLATE: One piece, die formed 16 gauge cold rolled steel<br />
backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, injection molded polycarbonate lens<br />
has molded prisms for superior light distribution and completely covers<br />
backplate to leave no exposed metal.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Four stainless steel fasteners securely fasten lens to<br />
backplate.<br />
GASKETING: Closed cell neoprene gasketing creates a tight seal<br />
against contaminants and moisture.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
SURFACE CONDUIT BACKBOX: Optional cast aluminum backbox<br />
to allow for surface conduit (required for some options and accessories).<br />
Bronze polyester powder finish.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations for ceiling mount and damp locations<br />
for wall mount.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSB58 Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSB58-1/13QD-120-HPF-GLR-TX<br />
HSB58<br />
zSeries<br />
z HSB58<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
Fluorescent<br />
❑ 7TT<br />
❑ 13QD (1 max.)<br />
<strong>Inc</strong>andescent<br />
❑ 75I<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ ABP<br />
Aluminum Backplate<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ HV<br />
External Visor for Wall Mount<br />
❑ OPL<br />
Opal Polycarbonate Lens<br />
❑ PC120<br />
Photo Cell 120 Volt (Requires SCB)<br />
❑ PC277<br />
Photo Cell 277 Volt (Requires SCB)<br />
❑ SCB<br />
Surface Conduit Backbox<br />
❑ SPS<br />
Security On/Off Push Switch (Requires SCB)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSB58-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSM<br />
Polycarbonate<br />
Surface Luminaire<br />
1/7TT<br />
2/7TT<br />
1/9TT<br />
2/9TT<br />
1/13TT<br />
2/13TT<br />
1/13QD<br />
1/18QD<br />
1/26QD<br />
1/28QD<br />
1/18PLT<br />
1/26PLT<br />
1/32PLT<br />
1/42PLT<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Schools<br />
• Shower rooms<br />
• Hotels and motels<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Lobbies and vestibules<br />
FEATURES<br />
• Injection molded polycarbonate lens<br />
• Energy efficient<br />
• Low profile; meets ADA requirements<br />
• Tamperproof screws<br />
10 1 / 4 "<br />
4 15 / 16 "<br />
2 1 / 4 "<br />
3 1 / 2 "<br />
4 1 / 4 "<br />
2 1 / 4 "<br />
Cross Section Top section - TT Lamp Top Section - QD Lamp<br />
SPECIFICATIONS<br />
HOUSING: One piece, die-formed 16 gauge cold rolled steel housing<br />
and backplate provides strength and rigidity.<br />
LENS: One piece, UV stabilized, injection molded polycarbonate lens<br />
has molded prisms for superior light distribution.<br />
REFLECTOR: 20 gauge cold rolled steel finish. Die formed for symmetrical<br />
light distribution. Fastened to inner flange for easy removal<br />
and servicing.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Two stainless steel tamperproof fasteners secure lens<br />
to housing.<br />
GASKETING: Silicone gasketing seals lens to housing.<br />
FINISH: Black, bronze or white polyester powder coat finish over<br />
multi-stage phosphatizing pretreatment to ensure superior paint<br />
adhesion and rust resistance.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSM Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSM-1/13TT-120-HPF-GLR-WHT-TX<br />
HSM<br />
zSeries<br />
z HSM<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
Fluorescent<br />
❑ 7TT<br />
❑ 9TT<br />
❑ 13TT<br />
❑ 13QD (1 max.)<br />
❑ 18QD (1 max.)<br />
❑ 26QD (1 max.)<br />
❑ 28QD (1 max.)<br />
❑ 18PLT (1 max.)<br />
❑ 26PLT (1 max.)<br />
❑ 32PLT (1 max.)<br />
❑ 42PLT (1 max.)<br />
zVoltage<br />
❑120<br />
❑277<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB † *<br />
Electronic<br />
*Standard<br />
†<br />
Requires 4 pin lamps. Consult factory<br />
for availability.<br />
zOptions<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ OPL<br />
Opal Polycarbonate Lens<br />
❑ PC120<br />
Photo Cell 120 volt<br />
❑ PC277<br />
Photo Cell 277 volt<br />
❑ SPS<br />
Security On/Off Push Switch<br />
❑ HV<br />
Horizontal Visor<br />
❑ VV<br />
Vertical Visor<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
❑ LMP (Specify)<br />
zColor Options<br />
❑ BLK<br />
Black<br />
❑ BRZ<br />
Bronze<br />
❑ WHT*<br />
White<br />
*Standard<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSM-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSS<br />
Polycarbonate<br />
Surface Luminaire<br />
1/7TT<br />
2/7TT<br />
1/9TT<br />
2/9TT<br />
1/13TT<br />
2/13TT<br />
DIMENSIONS<br />
13 1 / 4 "<br />
APPLICATIONS<br />
• Schools<br />
• Shower rooms<br />
• Hotels and motels<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Lobbies and vestibules<br />
FEATURES<br />
• Injection molded polycarbonate lens<br />
• Cast aluminum housing<br />
• Tamperproof screws<br />
• Low profile; meets ADA requirements<br />
5 1 / 8 " 3 "<br />
SPECIFICATIONS<br />
HOUSING: One piece, die cast aluminum housing. Separate ballast<br />
compartments to optimize thermal performance.<br />
LENS: One piece, UV stabilized, injection molded polycarbonate lens<br />
has molded prisms for superior light distribution.<br />
REFLECTOR: Designed for optical performance and finished in 93%<br />
reflectance polyester powder coat.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
FASTENERS: Two stainless steel tamperproof fasteners secure lens<br />
to housing.<br />
GASKETING: Silicone gasketing seals lens to housing.<br />
FINISH: Black, bronze or white polyester powder coat finish over<br />
multi-stage phosphatizing pretreatment to ensure superior paint<br />
adhesion and rust resistance.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp and wet locations.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSS Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSS-1/13TT-120-HPF-GLR<br />
HSS<br />
zSeries<br />
z HSS<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
Fluorescent<br />
❑ 7TT<br />
❑ 9TT<br />
❑ 13TT<br />
zVoltage<br />
❑120<br />
❑ 277<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
*Standard<br />
zOptions<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ OPL<br />
Opal Polycarbonate Lens<br />
❑ SPS<br />
Security On/Off Push Switch<br />
❑ MOD<br />
Specify Item<br />
❑ LMP (Specify)<br />
zColor Options<br />
❑ BLK<br />
Black<br />
❑ BRZ*<br />
Bronze<br />
❑ WHT<br />
White<br />
*Standard<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
CCorporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSS-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HRH15<br />
15" Square<br />
Recessed Luminaire<br />
35HPS<br />
50HPS<br />
70HPS<br />
100HPS<br />
150HPS<br />
70MH<br />
100MH<br />
150MH<br />
175MH<br />
DIMENSIONS<br />
16"<br />
APPLICATIONS<br />
• Schools<br />
• Shopping centers<br />
• Hotels and motels<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Transit stations<br />
FEATURES<br />
• 14 gauge cold rolled steel door<br />
• 18 gauge cold rolled steel housing<br />
• Spun aluminum reflector<br />
• Tamperproof screws<br />
12.4"<br />
11 1 / 2 "<br />
14 5 / 8 " sq. opening<br />
15 3 / 8 "<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, die formed, 18 gauge, cold rolled steel housing<br />
and end caps.<br />
DOOR: One piece, 16 gauge, cold rolled steel door frame with die<br />
formed edges and tightly closed corners for increased rigidity.<br />
LENS: Lens to be specified. See lens options.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
SOCKET: Medium base, porcelain socket, copper screwshell and<br />
150° silicone braid leads. 4000V pulse rated (for use with HID<br />
lamps).<br />
REFLECTOR: Spun, satin finish aluminum reflector.<br />
FASTENERS: Stainless steel tamperproof fasteners secure door to<br />
housing.<br />
GASKETING: Polyurethane gasketing seals against outside contaminants.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HRH15 15" Square Recessed Luminaire<br />
ORDERING INFORMATION<br />
Example: HRH15-100M-15PG/25CP-120-HPF-QRS-TX<br />
HRH15<br />
zSeries<br />
z HRH15<br />
zLamp Type<br />
High Pressure Sodium<br />
❑ 35S (S76)<br />
❑ 50S (S68)<br />
❑ 70S (S62)<br />
❑ 100S (S54)<br />
❑ 150S (S55)<br />
Metal Halide<br />
❑ 70M (M98)<br />
❑ 100M (M90)<br />
❑ 150M (M102)<br />
❑ 175M (M57)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
Fixture Side<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
Environment Side<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
Drop Lens<br />
❑ DPR<br />
Dropped Prismatic<br />
Polycarbonate Refractor<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑TRIVOLT<br />
120/277/347 Volt Ballast<br />
❑QUADVOLT<br />
Multitap Ballast<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
*Standard<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System<br />
with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(DC Bayonet Base Lamp by Others)<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HRH15-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSC88<br />
Polycarbonate<br />
Surface Luminaire<br />
35HPS<br />
50HPS<br />
70HPS<br />
32MH<br />
50MH<br />
70MH<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Schools<br />
• Shopping centers<br />
• Hotels and motels<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Transit stations<br />
FEATURES<br />
• Injection molded polycarbonate lens<br />
• Cast aluminum housing<br />
• Tamperproof screws<br />
9 "<br />
3 3 / 8 "<br />
7 3 / 8 "<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, corrosion resistant, cast aluminum housing.<br />
Three 7/8" diameter knockouts standard for surface conduit.<br />
LENS: One piece, UV stabilized, injection molded polycarbonate lens<br />
has molded prisms for superior light distribution.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
SOCKET: Medium base, porcelain socket, copper screwshell and<br />
150° silicone braid leads. 4000V pulse rated (for use with HID<br />
lamps).<br />
REFLECTOR: Designed for optical performance and finished in<br />
93% reflectance white polyester powder coat.<br />
FASTENERS: Stainless steel tamperproof fasteners secure lens to<br />
housing.<br />
GASKETING: Closed cell neoprene gasketing creates a tight seal<br />
against contaminants and moisture.<br />
FINISH: Bronze polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSC88 Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSC88-50M-120-HPF-QRS-TX<br />
HSC88<br />
zSeries<br />
z HSC88<br />
zLamp Type<br />
High Pressure Sodium<br />
❑ 35S (S76)<br />
❑ 50S (S68)<br />
❑ 70S (S62)<br />
Metal Halide<br />
❑ 32M (M100)<br />
❑ 50M (M110)<br />
❑ 70M (M98)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑ HPF<br />
High <strong>Power</strong> Factor<br />
*Standard<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ HV<br />
External Visor for Wall Mount<br />
❑ IAV<br />
Internal Asymmetric Visor<br />
❑ OPL<br />
Opal Polycarbonate Lens<br />
❑ PC120<br />
Photo Cell 120 Volt<br />
❑ PC277<br />
Photo Cell 277 Volt<br />
❑ PNDT<br />
Pendant Mounting (Stem by Others)<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only (DC Bayonet Base Lamp by Others)<br />
❑ WB<br />
Wall Bracket<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSC88-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSC12<br />
Polycarbonate<br />
Surface Luminaire<br />
35HPS<br />
50HPS<br />
70HPS<br />
100HPS<br />
32MH<br />
50MH<br />
70MH<br />
100MH<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Schools<br />
• Shopping centers<br />
• Hotels and motels<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Transit stations<br />
FEATURES<br />
• Injection molded polycarbonate lens<br />
• Cast aluminum housing<br />
• Tamperproof screws<br />
12 1 / 2 "<br />
8 1 / 2 "<br />
3 3 / 4 "<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, corrosion resistant, cast aluminum housing.<br />
Three 7/8" diameter knockouts standard for surface conduit.<br />
LENS: One piece, UV stabilized, injection molded polycarbonate lens<br />
has molded prisms for superior light distribution.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
SOCKET: Medium base, porcelain socket, copper screwshell and<br />
150° silicone braid leads. 4000KV pulse rated (for use with HID<br />
lamps).<br />
93% reflectance white polyester powder coat.<br />
FASTENERS: Stainless steel tamperproof fasteners secure lens to<br />
housing.<br />
GASKETING: Closed cell neoprene gasketing creates a tight seal<br />
against contaminants and moisture.<br />
FINISH: Bronze polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
REFLECTOR: Designed for optical performance and finished in<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSC12 Polycarbonate Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSC12-100M-120-HPF-QRS-TX<br />
HSC12<br />
zSeries<br />
z HSC12<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 35S (S76)<br />
❑ 50S (S68)<br />
❑ 70S (S62)<br />
❑ 100S (S54)<br />
Metal Halide<br />
❑ 32M (M100)<br />
❑ 50M (M110)<br />
❑ 70M (M98)<br />
❑ 100M (M90)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
*Standard<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ HV<br />
External Visor for Wall Mount<br />
❑ IAV<br />
Internal Asymmetric Visor<br />
❑ OPL<br />
Opal Polycarbonate Lens<br />
❑ PC120<br />
Photo Cell 120 Volt<br />
❑ PC277<br />
Photo Cell 277 Volt<br />
❑ PNDT<br />
Pendant Mounting (Stem by Others)<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(DC Bayonet Base Lamp by Others)<br />
❑ WB<br />
Wall Bracket<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSC12-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSF15<br />
15" Square<br />
Surface Luminaire<br />
70HPS<br />
100HPS<br />
150HPS<br />
70MH<br />
100MH<br />
150MH<br />
175MH<br />
1501<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Schools<br />
• Shopping centers<br />
• Hotels and motels<br />
• Public housing<br />
• Park and recreational<br />
facilities<br />
• Transit stations<br />
FEATURES<br />
• 14 gauge cold rolled steel door<br />
• 18 gauge cold rolled steel housing<br />
• Spun aluminum reflector<br />
• Tamperproof screws<br />
11.4"<br />
9 1 / 2 "<br />
15"<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, die formed, 18 gauge, cold rolled steel housing<br />
and end caps.<br />
DOOR: One piece, 14 gauge, cold rolled steel door frame with die<br />
formed edges and tightly closed corners for increased rigidity.<br />
LENS: Lens to be specified. See lens options.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
SOCKET: Medium base, porcelain socket, copper screwshell and<br />
150° silicone braid leads. 4000V pulse rated (for use with HID<br />
lamps).<br />
REFLECTOR: Spun, satin finish aluminum reflector.<br />
FASTENERS: Stainless steel tamperproof fasteners secure door to<br />
housing.<br />
GASKETING: Polyurethane gasketing seals against outside contaminants.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSF15 15" Square Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSF15-100M-15PG/25CP-120-HPF-QRS<br />
HSF15<br />
zSeries<br />
z HSF15<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 70S (S62)<br />
❑ 100S (S54)<br />
❑ 150S (S55)<br />
Metal Halide<br />
❑ 70M (M98)<br />
❑ 100M (M90)<br />
❑ 150M (M102)<br />
❑ 175M (M57)<br />
❑ LMP (Specify)<br />
<strong>Inc</strong>andescent<br />
❑ 1501 (1 Max.)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
Fixture Side<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
Environment Side<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
Drop Lens<br />
❑ DPR<br />
Dropped Prismatic<br />
Polycarbonate Refractor<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
*Standard<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(DC Bayonet Base Lamp By Others)<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSF15-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HSH15<br />
15" Square<br />
Surface Luminaire<br />
70HPS<br />
100HPS<br />
150HPS<br />
70MH<br />
100MH<br />
150MH<br />
175MH<br />
1501<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Schools<br />
• Shopping centers<br />
• Hotels and motels<br />
• Public housing<br />
• Park and recreational<br />
facilities<br />
• Transit stations<br />
FEATURES<br />
• 14 gauge cold rolled steel door<br />
• 18 gauge cold rolled steel housing<br />
• Spun aluminum reflector<br />
• Tamperproof screws<br />
11.4"<br />
9 1 / 2 "<br />
15"<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, die formed, 18 gauge, cold rolled steel housing<br />
and end caps.<br />
DOOR: One piece, 14 gauge, cold rolled steel door frame with die<br />
formed edges and tightly closed corners for increased rigidity.<br />
LENS: Lens to be specified. See lens options.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
SOCKET: Medium base, porcelain socket, copper screwshell and<br />
150° silicone braid leads. 4000V pulse rated (for use with HID<br />
lamps).<br />
REFLECTOR: Spun, satin finish aluminum reflector.<br />
FASTENERS: Stainless steel tamperproof fasteners secure door to<br />
housing.<br />
GASKETING: Polyurethane gasketing seals against outside contaminants.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HSH15 15" Square Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: HSH15-100M-15PG/25CP-120-HPF-QRS<br />
HSH15<br />
zSeries<br />
z HSH15<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 70S (S62)<br />
❑ 100S (S54)<br />
❑ 150S (S55)<br />
Metal Halide<br />
❑ 70M (M98)<br />
❑ 100M (M90)<br />
❑ 150M (M102)<br />
❑ 175M (M57)<br />
❑ LMP (Specify)<br />
<strong>Inc</strong>andescent<br />
❑ 1501 (1 Max.)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
Fixture Side<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
Environment Side<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
Drop Lens<br />
❑ DPR<br />
Dropped Prismatic<br />
Polycarbonate Refractor<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑ HPF<br />
High <strong>Power</strong> Factor<br />
*Standard<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(DC Bayonet Base Lamp By Others)<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX*<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
*Standard<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HSH15-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
<strong>HIGH</strong> <strong>ABUSE</strong><br />
HWW/MOD<br />
Wraparound<br />
Wall Luminaire<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Jails<br />
• Penitentiaries<br />
• Psychiatric units<br />
• Transit platforms<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Polycarbonate lens<br />
• Tamperproof screws<br />
• Unitized power module<br />
5 1 / 4 "<br />
18"<br />
3"<br />
Top View<br />
3 /8 " Dia. Mtg. Holes<br />
7 /8 " Dia. Knockout<br />
SPECIFICATIONS<br />
HOUSING: Die formed cold rolled steel housing and end caps.<br />
Knockouts in each end allow for surface conduit and simplify row<br />
installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
LENS RETENTION: Double walled lens channel securely retains<br />
lens along entire length.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Four stainless steel fasteners secure lens in place<br />
through captive cagenuts that are accessible without removing housing<br />
from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
HWW/MOD Wraparound Wall Luminaire<br />
ORDERING INFORMATION<br />
HWW/MOD<br />
Example: HWW/MOD-20-2/60I-15PP-120-WL-TX<br />
zSeries<br />
z HWW/MOD<br />
18" Nom. Length<br />
zGauge<br />
❑ 20<br />
zLamp Count<br />
❑ 2<br />
zLamp Type<br />
❑ 60I<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zOptions<br />
❑ ALH<br />
Aluminum Housing (Painted)<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
HWW/MOD-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CSHI22<br />
Clean Room<br />
Surface H.I.D.<br />
Luminaire<br />
150HPS<br />
250HPS<br />
400HPS<br />
175MH<br />
250MH<br />
400MH<br />
200I<br />
400I<br />
DIMENSIONS<br />
14"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
24"<br />
Cross Section<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: Die-formed 20 gauge cold rolled steel housing with tightly<br />
butted and spot welded end caps. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
SOCKET: Mogul base, porcelain socket, copper screwshell and 150º<br />
silcone braid leads. 4000V pulse rated (for use with H.I.D. lamps).<br />
BALLAST: HPF potted and encased ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSHI22 2x2 Clean Room Surface H.I.D. Luminaire<br />
ORDERING INFORMATION<br />
Example: CSHI22-250M-15PG-DUAL-SDN<br />
CSHI22<br />
zSeries<br />
z CSHI22<br />
2'x2' Nom. Size<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 150S (S56)<br />
❑ 250S (S50)<br />
❑ 400S (S51)<br />
Metal Halide<br />
❑ 175M (M57)<br />
❑ 250M (M58)<br />
❑ 400M (M59)<br />
❑ LMP (Specify)<br />
<strong>Inc</strong>andescent<br />
❑ 200I (Medium base)<br />
❑ 400I<br />
zLens Options<br />
Fixture side<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 18PG<br />
.187" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
Environment side (Optional)<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
zVoltage<br />
❑120<br />
❑277<br />
❑DUAL<br />
❑QUAD<br />
❑Specify<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(Mini candela base lamp by others)<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door (Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSHI22-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CSHO22<br />
Clean Room<br />
Surface H.I.D.<br />
Luminaire<br />
150HPS<br />
250HPS<br />
400HPS<br />
175MH<br />
250MH<br />
400MH<br />
200I<br />
400I<br />
DIMENSIONS<br />
14"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Optional asymmetric distibution<br />
24"<br />
Cross Section<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: Die-formed 20 gauge cold rolled steel housing with tightly<br />
butted and spot welded end caps. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. For other door<br />
materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
SOCKET: Mogul base, porcelain socket, copper screwshell and 150º<br />
silcone braid leads. 4000V pulse rated (for use with H.I.D. lamps).<br />
BALLAST: HPF potted and encased ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSHO22 2x2 Clean Room Surface H.I.D. Luminaire<br />
ORDERING INFORMATION<br />
Example: CSHO22-250M-15PG-DUAL-SDN<br />
CSHO22<br />
zSeries<br />
z CSHO22<br />
2'x2' Nom. Size<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 150S (S56)<br />
❑ 250S (S50)<br />
❑ 400S (S51)<br />
Metal Halide<br />
❑ 175M (M57)<br />
❑ 250M (M58)<br />
❑ 400M (M59)<br />
❑ LMP (Specify)<br />
<strong>Inc</strong>andescent<br />
❑ 200I (Medium base)<br />
❑ 400I (Medium base)<br />
zLens Options<br />
Fixture side<br />
❑ FRL<br />
Fresnel Lens<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 18PG<br />
.187" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
Environment side (Optional)<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
zVoltage<br />
❑120<br />
❑277<br />
❑DUAL<br />
❑QUAD<br />
❑Specify<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(Mini candela base lamp by others)<br />
❑ ASY<br />
Asymmetric Distribution<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSHO22-02-ASYM © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x4<br />
CSI14<br />
Clean Room<br />
Surface<br />
Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
12"<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
14" 14" 14"<br />
8"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens to<br />
form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSI14 1x4 Clean Room Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSI14-2/32T8-12PA-120-ESB<br />
CSI14<br />
zSeries<br />
z CSI14<br />
1’ X 4’ Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140” K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140” KSH 20<br />
❑ 15KSH19<br />
.150” KSH 19<br />
❑ KSH12RF<br />
.125” Prismatic Acrylic w/ RFI shielding<br />
❑ 12PA/ST<br />
.125” Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting (K. O. in End)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Iten<br />
zDoor Options<br />
❑ ALXP<br />
Extruded Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSI14-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CSI22<br />
Clean Room<br />
Surface<br />
Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
18"<br />
20"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens to<br />
form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSI22 2x2 Clean Room Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSI22-2/17T8-12PA-120-ESB<br />
CSI22<br />
zSeries<br />
z CSI22<br />
2’ X 2’ Nom. Length<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (3 max.)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140” K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140” KSH 20<br />
❑ 15KSH19<br />
.150” KSH 19<br />
❑ KSH12RF<br />
.125” Prismatic Acrylic w/ RFI shielding<br />
❑ 12PA/ST<br />
.125” Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting (K. O. in End)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Iten<br />
zDoor Options<br />
❑ ALXP<br />
Extruded Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSI22-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x4<br />
CSI24<br />
Clean Room<br />
Surface<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
14" 14" 14"<br />
20"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens to<br />
form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSI24 2x4 Clean Room Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSI24-2/32T8-12PA-120-ESB<br />
CSI24<br />
zSeries<br />
z CSI24<br />
2’ X 4’ Nom. Length<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140” K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140” KSH 20<br />
❑ 15KSH19<br />
.150” KSH 19<br />
❑ KSH12RF<br />
.125” Prismatic Acrylic w/ RFI shielding<br />
❑ 12PA/ST<br />
.125” Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting (K. O. in End)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Iten<br />
zDoor Options<br />
❑ ALXP<br />
Extruded Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSI24-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1X1<br />
CSO11<br />
Clean Room<br />
One Piece Door<br />
Surface Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
8"<br />
8"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. For other door<br />
materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Four stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSO11 1X1 Clean Room One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSO11-2/13TT-12PA-120-HPF-SDN<br />
CSO11<br />
zSeries<br />
z CSO11<br />
1'x1' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSO11-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x2<br />
CSO12<br />
Clean Room<br />
One Piece Door<br />
Surface Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
18"<br />
8"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. For other door<br />
materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSO12 1x2 Clean Room One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSO12-2/17T8-12PA-120-ESB-SDN<br />
CSO12<br />
zSeries<br />
z CSO12<br />
1'x2' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSO12-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x4<br />
CSO14<br />
Clean Room<br />
One Piece Door<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece, overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
14" 14" 14"<br />
8"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge, cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. For other door<br />
materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSO14 1x4 Clean Room One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSO14-2/32T8-12PA-120-ESB-SDN<br />
CSO14<br />
zSeries<br />
z CSO14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI Shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSO14-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CSO22<br />
Clean Room<br />
One Piece Door<br />
Surface Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
4/40BX<br />
DIMENSIONS<br />
5"<br />
24"<br />
Cross Section<br />
18"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
20"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door yields<br />
the best possible seal. Silicone gasketing integrates door frame and<br />
lens to form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter of<br />
door to seal door to housing. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, Energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust resistance.<br />
Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O.<br />
CSA approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSO22 2x2 Clean Room One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSO22-2/17T8-12PA-120-ESB-SDN<br />
CSO22<br />
zSeries<br />
z CSO22<br />
2'x2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
PHOTOMETRICS (Consult Factory for Details)<br />
Job:<br />
Type:<br />
Cat#<br />
Date:<br />
Remarks:<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSO22-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Ttype:<br />
CLEAN ROOM<br />
2x4<br />
CSO24<br />
Clean Room<br />
One Piece Door<br />
Surface Luminaire<br />
4/40BX<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
5"<br />
24"<br />
Cross Section<br />
14" 14" 14"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
20"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. For other door<br />
materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSO24 2x4 Clean Room One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSO24-2/32T8-12PA-120-ESB-SDN<br />
CSO24<br />
zSeries<br />
z CSO24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ 40BX<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
PHOTOMETRICS (Consult Factory for Details)<br />
Job:<br />
Type:<br />
Cat#<br />
Date:<br />
Remarks:<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSO24-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
<strong>4ft</strong><br />
CSO6<br />
6" Square<br />
Clean Room<br />
One Piece Door<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
DIMENSIONS<br />
6"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
6"<br />
Cross Section<br />
SPECIFICATIONS<br />
48"<br />
Side View<br />
HOUSING: Die formed, 20 gauge cold rolled steel housing with welded<br />
seams for rigidity. Supplied with 7/8" diameter knockouts for<br />
wiring. One piece housing is available in different lengths.<br />
DOOR: Extruded aluminum door fastened by tamperproof screws to<br />
housing and gasketed to lens to form a permanent hermetic seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Tamperproof screws secure through sealed captive<br />
nuts and are evenly spaced to compress gasketing on all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CSO6 <strong>4ft</strong> 6" Square Clean Room One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: CSO14-2/32T8-12PA-120-ESB-SDN<br />
CSO6<br />
zSeries<br />
z CSO6<br />
6" x 6" Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CSO6-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
CST<br />
Clean Room<br />
Laminar Flow<br />
Teardrop Luminaire<br />
1/17T8<br />
1/20T12<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
2"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Laminar flow rooms<br />
Class M1.5 or 2.5<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Narrow, aerodynamic profile<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Energy efficient<br />
6"<br />
7"<br />
48"<br />
7"<br />
7 /8 " K.O.'s<br />
Cross Section<br />
24"<br />
5" 5"<br />
7 /8 " K.O.'s<br />
SPECIFICATIONS<br />
HOUSING: Die formed 20 gauge cold rolled steel housing with tightly<br />
butted and spot welded end caps. Flat 16 gauge end caps eliminate<br />
the need for unsightly snap on covers that inhibit maintenance and<br />
entrap contaminants. See options for other materials.<br />
LENS: One piece, extruded, acrylic lens with internal linear prisms<br />
for optimal light control. Smooth exterior surface to eliminate entrapment.<br />
GASKETING: White, closed cell neoprene gasketing seals lens to<br />
end cap.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures. Four, 7/8" reset knockouts for wiring access.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CST Clean Room Laminar Flow Teardrop Luminaire<br />
ORDERING INFORMATION<br />
Example: CST-1/32T8-CLR-120-ESB-SHP<br />
CST<br />
zSeries<br />
z CST<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type/Length<br />
❑ 17T8 (1 max)<br />
24" long<br />
❑ 20T12 (1 max)<br />
24" long<br />
❑ 40BX<br />
1Lmp=24" long / 2Lmp=48" long<br />
❑ 32T8<br />
1Lmp=48" long / 2Lmp=96" long**<br />
❑ 40T12<br />
1Lmp=48" long / 2Lmp=96" long**<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ CLR<br />
Clear Prismatic Lens<br />
❑ OPL<br />
Opal Prismatic Lens<br />
❑ YEL<br />
UV Filtering Yellow Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑220<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 50HZ<br />
50 Hertz Operating Frequency<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
** 96" Length = Two 48" units<br />
tandem wired.<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CST-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
CWW<br />
4 ft Clean Room<br />
Wall Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
DIMENSIONS<br />
12 7 / 8 "<br />
7 1 / 8 "<br />
APPLICATIONS<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Contraband drop slot<br />
• Embossed mounting holes<br />
• Hidden continuous piano hinge<br />
• Unitized power module<br />
• Recessed fasteners<br />
• Rigid backplate design<br />
53 1 / 4 "<br />
14" 14" 14"<br />
8"<br />
Front View<br />
9 /16 " Dia. Mtg. Holes<br />
2 1 / 4 " Dia. Access Hole<br />
SPECIFICATIONS<br />
HOUSING: Die formed 20 gauge cold rolled steel housing with continuously<br />
tig welded seams.<br />
BACKPLATE: Die formed, 20 gauge cold rolled steel backplate with<br />
eight mounting holes.<br />
HINGE: Continuous piano hinge with welded pin end.<br />
LENS: Lens to be specified. See lens options.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to housing and perimeter of housing to seal housing<br />
to wall and backplate.<br />
FASTENERS: Stainless steel machine screws.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CWW 4 ft Clean Room Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: CWW-2/32T8-12PA-120-ESB2-EBP<br />
CWW<br />
zSeries<br />
z CWW<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ SPK<br />
Speaker Compartment<br />
(Extends Housing)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SBN<br />
Stainless Steel Backplate (Polished)<br />
❑ SBP<br />
Stainless Steel Backplate (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ TCS<br />
Touch Control On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
°K<br />
(Optional: Specify color)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CWW4-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
CXT<br />
Clean Room<br />
Laminar Flow<br />
Extruded Aluminum<br />
Teardrop Luminaire<br />
1/17T8<br />
1/20T12<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
6 1 / 16 "<br />
2"<br />
7"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Laminar flow rooms<br />
Class M1.5 or 2.5<br />
(Class 1 or Class 10)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
48"<br />
FEATURES<br />
• Anodized extruded aluminum<br />
• Narrow, aerodynamic profile<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Energy efficient<br />
7"<br />
7 /8 " K.O.'s<br />
Cross Section<br />
24"<br />
5" 5"<br />
7 /8 " K.O.'s<br />
SPECIFICATIONS<br />
HOUSING: Anodized extruded aluminum housing with tightly fitted<br />
end caps. Flat end caps eliminate the need for unsightly snap on<br />
covers that inhibit maintenance and entrap contaminants. See<br />
options for other materials.<br />
LENS: One piece, extruded, acrylic lens with internal linear prisms<br />
for optimal light control. Smooth exterior surface to eliminate entrapment.<br />
GASKETING: White, closed cell neoprene gasketing seals lens to<br />
end cap.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures. Four, 7/8" reset knockouts for wiring access.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FINISH: Exterior and end caps: clear anodized aluminum. Internal<br />
components: white polyester powder coat finish over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Sutable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CXT Clean Room Laminar Flow Extruded AluminumTeardrop Luminaire<br />
ORDERING INFORMATION<br />
Example: CXT-1/32T8-CLR-120-ESB<br />
CXT<br />
zSeries<br />
z CXT<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type/Length<br />
❑ 17T8 (1 max)<br />
24" long<br />
❑ 20T12 (1 max)<br />
24" long<br />
❑ 40BX<br />
1Lmp=24" long / 2Lmp=48" long<br />
❑ 32T8<br />
1Lmp=48" long / 2Lmp=96" long**<br />
❑ 40T12<br />
1Lmp=48" long / 2Lmp=96" long**<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ CLR<br />
Clear Prismatic Lens<br />
❑ OPL<br />
Opal Prismatic Lens<br />
❑ YEL<br />
UV Filtering Yellow Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 220<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 50HZ<br />
50 Hertz Operating Frequency<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat. #:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Remarks:<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CXT-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
COR2<br />
2 ft Clean Room<br />
Corner Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
8"<br />
8"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M1.5 thru M2.5<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
8"<br />
Cross Section<br />
14"<br />
4"<br />
9 /16 " Dia. Mtg. Slots 2 1 / 4 " Dia. Access Hole<br />
Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die-formed 20 gauge cold rolled steel housing with continuously<br />
tig welded seams. Contains no holes that would allow air<br />
passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth<br />
environmental side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasketing seals lens to<br />
door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
COR2 2 ft Clean Room Corner Luminaire<br />
ORDERING INFORMATION<br />
Example: COR2-2/17T8-15PP-120-ELB-NL7<br />
COR2<br />
zSeries<br />
z COR2<br />
24" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140” K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140” KSH 20<br />
❑ 15KSH19<br />
.150” KSH 19<br />
❑ KSH12RF<br />
.125” Prismatic Acrylic w/ RFI shielding<br />
❑ 12PA/ST<br />
.125” Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting (K. O. in End)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Iten<br />
zDoor Options<br />
❑ ALXP<br />
Extruded Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
COR2-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
COR4<br />
4 ft Clean Room<br />
Corner Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
8"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M1.5 thru M2.5<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
8"<br />
8"<br />
14" 14" 14"<br />
Cross Section<br />
4"<br />
9 /16 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die-formed 20 gauge cold rolled steel housing with<br />
continuously tig welded seams. Contains no holes that would allow<br />
air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth<br />
environmental side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
COR4 4 ft Clean Room Corner Luminaire<br />
ORDERING INFORMATION<br />
Example: COR4-2/32T8-15PP-120-ELB-NL7<br />
COR4<br />
zSeries<br />
z COR4<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140” K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140” KSH 20<br />
❑ 15KSH19<br />
.150” KSH 19<br />
❑ KSH12RF<br />
.125” Prismatic Acrylic w/ RFI shielding<br />
❑ 12PA/ST<br />
.125” Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting (K. O. in End)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Iten<br />
zDoor Options<br />
❑ ALXP<br />
Extruded Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
COR4-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
3x3<br />
ARF<br />
Air-Removing<br />
Flange Luminaire<br />
4/32T8<br />
4/40T12<br />
DIMENSIONS<br />
7"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
34 3 / 4 " 2 1 / 4 " 37"<br />
35 3 / 4 "<br />
Cross Section<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
37"<br />
Side View<br />
Top Section<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth<br />
environmental side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing<br />
surrounds perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult<br />
factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
ARF 3x3 Air-Removing Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: ARF-4/32T8-12PA-120-ESB-SDN<br />
ARF<br />
zSeries<br />
z ARF<br />
3'x3' Nom. Size<br />
zLamp Count<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
ARF-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x1<br />
CRF11<br />
Clean Room<br />
One Piece Door<br />
Flange Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5 "<br />
12 "<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Ceiling cut out dims.<br />
10 13/16" x 12 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Four stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRF11 1x1 Clean Room One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRF11-2/13TT-12PA-120-NPF-SDN<br />
CRF11<br />
zSeries<br />
z CRF11<br />
1'x1' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF11<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRF11-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x2<br />
CRF12<br />
Clean Room<br />
One Piece Door<br />
Flange Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5 "<br />
12 "<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
10 13/16" x 24 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRF12 1x2 Clean Room One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRF12-2/17T8-12PA-120-ESB-SDN<br />
CRF12<br />
zSeries<br />
z CRF12<br />
1'x2' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF12<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRF12-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x4<br />
CRF14<br />
Clean Room<br />
One Piece Door<br />
Flange Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
12 "<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Ceiling cut out dims.<br />
10 13/16" x 48 3/16"<br />
Top View<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRF14 1x4 Clean Room One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRF14-2/32T8-12PA-120-ESB-SDN<br />
CRF14<br />
zSeries<br />
z CRF14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF14<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES:<br />
JOB INFORMATION<br />
PHOTOMETRICS (Consult Factory for Details)<br />
Job:<br />
Type:<br />
Cat#:<br />
Date:<br />
Remarks:<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRF14-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CRF22<br />
Clean Room<br />
One Piece Door<br />
Flange Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Ceiling cut out dims.<br />
22 13/16" x 24 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRF22 2x2 Clean Room One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRF22-2/17T8-12PA-120-ESB-SDN<br />
CRF22<br />
zSeries<br />
z CRF22<br />
2'x2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (3 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF22<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRF22-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x4<br />
CRF24<br />
Clean Room<br />
One Piece Door<br />
Flange Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
6/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
6/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
22 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRF24 2x4 Clean Room One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRF24-2/32T8-12PA-120-ESB-SDN<br />
CRF24<br />
zSeries<br />
z CRF24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 6<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF24<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRF24/6L-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
CRF-LVR24<br />
2x4<br />
Clean Room<br />
One Piece Door<br />
Aluminum Louver<br />
Flange Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Specular aluminum louver<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
22 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: .125” clear acrylic. See lens options.<br />
LOUVER: 1 1/2” deep specular aluminum louver with 3 rows of 9<br />
cells.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRF-LVR24 2x4 Clean Room One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRF-LVR24-4/32T8-12CA/LVR-120-ESB-SDN<br />
CRF-LVR24<br />
zSeries<br />
z CRF-LVR24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12CA/LVR<br />
.125" Clear Acrylic with Specular<br />
Aluminum Louver<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF24<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRF-LVR24-03 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x1<br />
CRG11<br />
Clean Room<br />
One Piece Door<br />
Grid Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
5"<br />
12"<br />
Cross Section<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door sandwiches<br />
'T' grid to yield the best possible seal. Silicone gasketing integrates<br />
door frame and lens to form a permanent hermetic seal. For<br />
other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to 'T' grid and perimeter of<br />
housing to seal housing to 'T' grid. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Four stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRG11 1x1 Clean Room One Piece Door Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRG11-2/13TT-12PA-120-HPF-SDN<br />
CRG11<br />
zSeries<br />
z CRG11<br />
1'x1' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRG11-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x2<br />
CRG12<br />
Clean Room<br />
One Piece Door<br />
Grid Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door sandwiches<br />
'T' grid to yield the best possible seal. Silicone gasketing integrates<br />
door frame and lens to form a permanent hermetic seal. For<br />
other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to 'T' grid and perimeter of<br />
housing to seal housing to 'T' grid. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Six stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRG12 1x2 Clean Room One Piece Door Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRG12-2/40BX-12PA-120-ESB-SDN<br />
CRG12<br />
zSeries<br />
z CRG12<br />
1'x2' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRG12-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x4<br />
CRG14<br />
Clean Room<br />
One Piece Door<br />
Grid Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door sandwiches<br />
'T' grid to yield the best possible seal. Silicone gasketing integrates<br />
door frame and lens to form a permanent hermetic seal. For<br />
other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to 'T' grid and perimeter of<br />
housing to seal housing to 'T' grid. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRG14 1x4 Clean Room One Piece Door Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRG14-2/32T8-12PA-120-ESB-SDN<br />
CRG14<br />
zSeries<br />
z CRG14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRG14-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CRG22<br />
Clean Room<br />
One Piece Door<br />
Grid Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
DIMENSIONS<br />
5"<br />
24"<br />
Cross Section<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door sandwiches<br />
'T' grid to yield the best possible seal. Silicone gasketing integrates<br />
door frame and lens to form a permanent hermetic seal. For<br />
other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to 'T' grid and perimeter of<br />
housing to seal housing to 'T' grid. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRG22 2x2 Clean Room One Piece Door Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRG22-2/40U3-12PA-120-ESB-SDN<br />
CRG22<br />
zSeries<br />
z CRG22<br />
2'x2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (3 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRG22-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x4<br />
CRG24<br />
Clean Room<br />
One Piece Door Grid<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
5"<br />
24"<br />
Cross Section<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Conforms with NSF Standards<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door sandwiches<br />
'T' grid to yield the best possible seal. Silicone gasketing integrates<br />
door frame and lens to form a permanent hermetic seal. For<br />
other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to 'T' grid and perimeter of<br />
housing to seal housing to 'T' grid. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRG24 2x4 Clean Room One Piece Door Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRG24-2/32T8-12PA-120-ESB-SDN<br />
CRG24<br />
zSeries<br />
z CRG24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRG24-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CRHF22<br />
Clean Room<br />
Recessed H.I.D.<br />
Flange Luminaire<br />
150HPS<br />
250HPS<br />
400HPS<br />
175MH<br />
250MH<br />
400MH<br />
200I<br />
400I<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
14"<br />
4 1 /8"<br />
Max<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
7/8" Dia. K.O.'s<br />
24 "<br />
Cross Section<br />
Ceiling cut out dims.<br />
22 13/16" x 22 13/16"<br />
Consult factory for<br />
continuous row mount.<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge, cold rolled steel housing with tightly<br />
butted and spot welded end caps. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. White, closed cell neoprene gasketing<br />
surrounds perimeter of door to seal door to ceiling and perimeter<br />
of housing to seal housing to ceiling. Silicone gasket seals lens to<br />
door.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: HPF potted and encased ballast standard. CBM/ETL certified.<br />
UL listed.<br />
SOCKET: Mogul base, porcelain socket, copper screwshell and 150º<br />
silcone braid leads. 4000V pulse rated (for use with H.I.D. lamps).<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRHF22 2x2 Clean Room Recessed H.I.D.Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRHF22-250M-15PG-DUAL-SDN<br />
CRHF22<br />
zSeries<br />
z CRHF22<br />
2'x 2' Nom. Size<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 150S (S56)<br />
❑ 250S (S50)<br />
❑ 400S (S51)<br />
Metal Halide<br />
❑ 175M (M57)<br />
❑ 250M (M58)<br />
❑ 400M (M59)<br />
❑ LMP (Specify)<br />
<strong>Inc</strong>andescent<br />
❑ 200I (Medium base)<br />
❑ 400I<br />
zLens Options<br />
Fixture side<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 18PG<br />
.187" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
Environment side (Optional)<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
zVoltage<br />
❑120<br />
❑277<br />
❑DUAL<br />
❑QUAD<br />
❑Specify<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(Mini Candela Base Lamp by Others)<br />
❑ PF22<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRHF22-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CRHG22<br />
Clean Room<br />
Recessed H.I.D.<br />
Grid Luminaire<br />
150HPS<br />
250HPS<br />
400HPS<br />
175MH<br />
250MH<br />
400MH<br />
200I<br />
400I<br />
DIMENSIONS<br />
14"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Accommodates up to 1 1/2”<br />
T-bar standard<br />
24"<br />
Cross Section<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: Die-formed 20 gauge cold rolled steel housing with tightly<br />
butted and spot welded end caps. Contains no holes that would<br />
allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door sandwiches<br />
'T' grid to yield the best possible seal. Silicone gasketing integrates<br />
door frame and lens to form a permanent hermetic seal. For<br />
other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to 'T' grid and perimeter of housing<br />
to seal housing to 'T' grid. Silicone gasket seals lens to door.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
SOCKET: Mogul base, porcelain socket, copper screwshell and 150º<br />
silcone braid leads. 4000V pulse rated (for use with H.I.D. lamps).<br />
BALLAST: HPF potted and encased ballast standard. CBM/ETL<br />
certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust resistance.<br />
Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O.<br />
CSA approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRHG22 2x2 Clean Room Recessed H.I.D. Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRHG22-400M-15PG-120-SDN<br />
CRHG22<br />
zSeries<br />
z CRHG22<br />
2'x2' Nom. Size<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 150S (S56)<br />
❑ 250S (S50)<br />
❑ 400S (S51)<br />
Metal Halide<br />
❑ 175M (M57)<br />
❑ 250M (M58)<br />
❑ 400M (M59)<br />
❑ LMP (Specify)<br />
<strong>Inc</strong>andescent<br />
❑ 200I (Medium base)<br />
❑ 400I<br />
zLens Options<br />
Fixture side<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 18PG<br />
.187" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
Environment side (Optional)<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
zVoltage<br />
❑120<br />
❑277<br />
❑DUAL<br />
❑QUAD<br />
❑Specify<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(Mini candela base lamp by others)<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRHG22-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CRHL22<br />
Clean Room<br />
Recessed H.I.D.<br />
Grid Luminaire<br />
150HPS<br />
250HPS<br />
400HPS<br />
175MH<br />
250MH<br />
400MH<br />
200I<br />
400I<br />
DIMENSIONS<br />
14"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
• Optional asymmetric distribution.<br />
24"<br />
Cross Section<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: Die-formed 20 gauge cold rolled steel housing with tightly<br />
butted and spot welded end caps. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens to<br />
form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of door<br />
to seal door to housing, and perimeter of housing to seal housing to<br />
‘T’ grid.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
SOCKET: Mogul base, porcelain socket, copper screwshell and 150º<br />
silcone braid leads. 4000V pulse rated (for use with H.I.D. lamps).<br />
BALLAST: HPF potted and encased ballast standard. CBM/ETL<br />
certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust resistance.<br />
Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O.<br />
CSA approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRHL22 2x2 Clean Room Recessed H.I.D. Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRHL22-400M-15PG-120-QS<br />
CRHL22<br />
zSeries<br />
z CRHL22<br />
2'x2' Nom. Size<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 150S (S56)<br />
❑ 250S (S50)<br />
❑ 400S (S51)<br />
Metal Halide<br />
❑ 175M (M57)<br />
❑ 250M (M58)<br />
❑ 400M (M59)<br />
❑ LMP (Specify)<br />
<strong>Inc</strong>andescent<br />
❑ 200I (Medium base)<br />
❑ 400I<br />
zLens Options<br />
Fixture side<br />
❑ FRL<br />
Fresnel Lens<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 18PG<br />
.187" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
Environment side (Optional)<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
zVoltage<br />
❑120<br />
❑277<br />
❑DUAL<br />
❑QUAD<br />
❑Specify<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(Mini candela base lamp by others)<br />
❑ ASY<br />
Asymmetric Distribution<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door (Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRHL22-01-ASYM © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CRHR22<br />
Clean Room<br />
Recessed H.I.D.<br />
Flange Luminaire<br />
150HPS<br />
250HPS<br />
400HPS<br />
175MH<br />
250MH<br />
400MH<br />
200I<br />
400I<br />
DIMENSIONS<br />
14"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Food processing<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
24 "<br />
Cross Section<br />
4 1 /8"<br />
Max<br />
Ceiling cut out dims.<br />
22 13/16" x 22 13/16"<br />
Consult factory for<br />
continuous row mount.<br />
7/8" Dia. K.O.'s<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge, cold rolled steel housing with tightly<br />
butted and spot welded end caps. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum, insert door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of door<br />
to seal door to housing, and perimeter of flange to seal housing to<br />
ceiling.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: HPF potted and encased ballast standard. CBM/ETL certified.<br />
UL listed.<br />
SOCKET: Mogul base, porcelain socket, copper screwshell and 150º<br />
silcone braid leads. 4000V pulse rated (for use with H.I.D. lamps).<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRHR22 2x2 Clean Room Recessed H.I.D.Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRHR22-250M-15PG-DUAL-SDN<br />
CRHR22<br />
zSeries<br />
z CRHR22<br />
2'x 2' Nom. Size<br />
zLamp Type<br />
High Pressure<br />
Sodium<br />
❑ 150S (S56)<br />
❑ 250S (S50)<br />
❑ 400S (S51)<br />
Metal Halide<br />
❑ 175M (M57)<br />
❑ 250M (M58)<br />
❑ 400M (M59)<br />
❑ LMP (Specify)<br />
<strong>Inc</strong>andescent<br />
❑ 200I (Medium base)<br />
❑ 400I<br />
zLens Options<br />
Fixture side<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 18PG<br />
.187" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
Environment side (Optional)<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
zVoltage<br />
❑120<br />
❑277<br />
❑DUAL<br />
❑QUAD<br />
❑Specify<br />
zOptions<br />
❑ F1<br />
Single Fuse<br />
❑ F2<br />
Double Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QRS/TD<br />
Quartz Restrike System with Time Delay<br />
❑ QS<br />
Quartz Socket Only<br />
(Mini Candela Base Lamp by Others)<br />
❑ PF22<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRHr22-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x1<br />
CRL11<br />
Clean Room<br />
Recessed Grid<br />
Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door.<br />
• Wet location listed.<br />
• Sealed, hole free housing.<br />
• Closed cell neoprene gasketing.<br />
• Smooth lens surface.<br />
• Continuous tig weld seams.<br />
• Accommodates up to 1 1/2"<br />
T-bar standard.<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of housing to seal housing<br />
to ‘T’ grid.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRL11 1x1 Clean Room Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRL11-2/13TT-12PA-120-ELB-ALX<br />
CRL11<br />
zSeries<br />
z CRL11<br />
1'x1' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI Shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRL11-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x2<br />
CRL12<br />
Clean Room<br />
Recessed Grid<br />
Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of housing to seal housing<br />
to ‘T’ grid.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
Door Detail<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRL12 1x2 Clean Room Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRL12-2/40BX-12PA-120-ESB-ALX<br />
CRL12<br />
zSeries<br />
z CRL12<br />
1'x2' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRL12-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x4<br />
CRL14<br />
Clean Room<br />
Recessed Grid<br />
Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of housing to seal housing<br />
to ‘T’ grid.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRL14 1x4 Clean Room Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRL14-2/32T8-12PA-120-ESB-ALX<br />
CRL14<br />
zSeries<br />
z CRL14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRL14-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CRL22<br />
Clean Room<br />
Recessed Grid<br />
Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
DIMENSIONS<br />
5"<br />
24"<br />
Cross Section<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that<br />
would allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and<br />
lens to form a tight seal.<br />
LENS: Installed with internal prism pattern to maintain smooth<br />
environmental side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing<br />
surrounds perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of housing to seal<br />
housing to ‘T’ grid.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without<br />
tools to facilitate service. AWM, TFN or THHN wire used<br />
throughout, rated for required temperatures.<br />
Door Detail<br />
BALLAST: Class P, energy saving ballast standard. Sound rating<br />
A, CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRL22 2x2 Clean Room Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRL22-2/40U6-12PA-120-ESB-ALX<br />
CRL22<br />
zSeries<br />
z CRL22<br />
2'x2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (3 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI Shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRL22-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x4<br />
CRL24<br />
Clean Room<br />
Recessed Grid<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
5"<br />
24"<br />
Cross Section<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of housing to seal housing<br />
to ‘T’ grid.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRL24 2x4 Clean Room Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: CRL24-3/32T8-12PA-120-ESB-ALX<br />
CRL24<br />
zSeries<br />
z CRL24<br />
2'x 4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI Shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRL24-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
CRL-LVR24<br />
2x4<br />
Clean Room<br />
Recessed Grid<br />
Aluminum Louver<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
5"<br />
24"<br />
Cross Section<br />
APPLICATIONS<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Specular aluminum louver<br />
• Continuous tig weld seams<br />
• Accomidates up to 1 1/2”<br />
T-bar standard<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: .125” clear acrylic. See lens options.<br />
LOUVER: 1 1/2” deep specular aluminum louver with 3 rows of 9<br />
cells.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of housing to seal housing<br />
to ‘T’ grid.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRL-LVR24 2x4 Clean Room Recessed Grid Aluminum Louver<br />
ORDERING INFORMATION<br />
Example: CRL-LVR24-3/32T8-12CA/LVR-120-ESB-ALX<br />
CRL-LVR24<br />
zSeries<br />
z CRL-LVR24<br />
2'x 4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12CA/LVR<br />
.125" Clear Acrylic with Specular Aluminum<br />
Louver<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRL-LVR24-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x1<br />
CRR11<br />
Clean Room<br />
Recessed Flange<br />
Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
11 3 / 4 "<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
Ceiling cut out dims.<br />
10 13/16" x 12 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of flange to seal housing<br />
to ceiling.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRR11 1x1 Clean Room Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRR11-2/13TT-12PA-120-NPF-ALX<br />
CRR11<br />
zSeries<br />
z CRR11<br />
1'x1' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF11<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRR11-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x2<br />
CRR12<br />
Clean Room<br />
Recessed Flange<br />
Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
11 3 / 4 "<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
10 13/16" x 24 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of flange to seal housing<br />
to ceiling.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating<br />
A, CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRR12 1x2 Clean Room Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRR12-2/17T8-12PA-120-ESB-ALX<br />
CRR12<br />
zSeries<br />
z CRR12<br />
1'x2' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF12<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRR12-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
1x4<br />
CRR14<br />
Clean Room<br />
Recessed Flange<br />
Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
11 3 / 4 "<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of flange to seal housing<br />
to ceiling.<br />
Ceiling cut out dims.<br />
10 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRR14 1x4 Clean Room Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRR14-2/32T8-12PA-120-ESB-ALX<br />
CRR14<br />
zSeries<br />
z CRR14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI<br />
shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver<br />
Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave<br />
Filtering Lens<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF14<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRR14-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x2<br />
CRR22<br />
Clean Room<br />
Recessed Flange<br />
Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
23 3 / 4 "<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Ceiling cut out dims.<br />
22 13/16" x 24 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of flange to seal housing<br />
to ceiling.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRR22 2x2 Clean RoomRecessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRR22-2/40U6-12PA-120-ESB-ALX<br />
CRR22<br />
zSeries<br />
z CRR22<br />
2'x2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (3 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF22<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRR22-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x4<br />
CRR24<br />
Clean Room<br />
Recessed Flange<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
6/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
6/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
23 3 / 4 "<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Ceiling cut out dims.<br />
22 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of flange to seal housing<br />
to ceiling.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating<br />
A, CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations. For hose down applications<br />
please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRR24 2x4 Clean Room Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: CRR24-4/32T8-12PA-120-ESB-ALX<br />
CRR24<br />
zSeries<br />
z CRR24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 6<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 14ACT<br />
.140" K12 Acrituf Acrylic<br />
❑ 14KSH20<br />
.140" KSH 20<br />
❑ 15KSH19<br />
.150" KSH 19<br />
❑ KSH12RF<br />
.125" Prismatic Acrylic w/RFI shielding<br />
❑ 12PA/ST<br />
.125" Prismatic Acrylic w/Silver Tint<br />
❑ KSH23UVBWF<br />
Ultraviolet and Blue Wave Filtering<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF24<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
Lens<br />
❑ LNS<br />
Specify Item<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRR24-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
CLEAN ROOM<br />
2x4<br />
CRR-LVR24<br />
Clean Room<br />
Recessed Flange<br />
Aluminum Louver<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
23 3 / 4 "<br />
Cross Section<br />
• Suitable for use in:<br />
Class M3.5 thru M6.5<br />
(Class 100 thru 100,000)<br />
• Aerospace<br />
• Biotech<br />
• Pharmaceutical<br />
• Electronics<br />
• Semiconductor<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Specular aluminum louver<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
22 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Contains no holes that would<br />
allow air passage.<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: .125”clear acrylic. See lens options.<br />
LOUVER: 1 1/2” deep specular aluminum louver with 3 rows of 9<br />
cells.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of lens to seal lens to door frame, perimeter of<br />
door to seal door to housing, and perimeter of flange to seal housing<br />
to ceiling.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating<br />
A, CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
CRR-LVR24 2x4 Clean Room Recessed Grid Aluminum Louver<br />
ORDERING INFORMATION<br />
Example: CRR-LVR24-4/32T8-12CA/LVR-120-ESB-ALX<br />
CRR-LVR24<br />
zSeries<br />
z CRR-LVR24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12CA/LVR<br />
.125" Clear Acrylic with Specular<br />
Aluminum Louver<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF24<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
CRR24-02louver © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
DRS<br />
Darkroom<br />
Safelight<br />
Luminaire<br />
Single<br />
Double<br />
Triple<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
12"<br />
5"<br />
Grid<br />
• X-ray processing<br />
• Photographic labs<br />
• Single, double or triplecompartment<br />
• Full range of Kodak filters<br />
available<br />
• Recessed or surface<br />
mounted<br />
Surface<br />
Flange<br />
12"<br />
36"<br />
24"<br />
12"<br />
FILTER GLASS FILTER FILTER GLASS FILTER<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Brushed stainless steel housing<br />
available; see options.<br />
DOOR: Die formed, cold rolled steel door frame and lens retaining<br />
angles. Gasketed to prevent light leakage between compartments.<br />
Brushed stainless steel door available; see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Kodak #1 red filter standard for filter compartments. Prismatic<br />
tempered glass lens standard for lensed compartments. For other<br />
Kodak filter types, see options.<br />
LAMPS: Filter compartments use one medium base 15 watt (maximum)<br />
incandescent lamp. Lens compartment uses one 200 watt<br />
(maximum) medium base incandescent lamp. Lamps by others.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures. Recessed fixtures are thermally protected<br />
and have a prewired junction box mounted to top of housing.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
DRS Darkroom Safelight Luminaire<br />
ORDERING INFORMATION<br />
Example: DRS-3/G-OA/#8-120<br />
DRS<br />
zSeries<br />
z DRS<br />
z# of Compartments<br />
❑ 1<br />
1 Filter<br />
❑ 2<br />
1 Filter/1 Lens<br />
❑ 3<br />
2 Filters/1 Lens<br />
(Lens in Center)<br />
zMounting<br />
❑ S<br />
Surface<br />
❑ F<br />
Recessed Flange<br />
❑ G<br />
Recessed Grid<br />
zFilter Type – Kodak<br />
(Specify for each filter compartment)<br />
❑ OA<br />
Greenish Yellow<br />
❑ OC<br />
Light Amber<br />
❑ #1*<br />
Red (Standard)<br />
❑ #1A<br />
Light Red<br />
❑ #2<br />
Dark Red<br />
❑ #3<br />
Dark Green<br />
❑ #6B<br />
Brown<br />
❑ #7B<br />
Green<br />
❑ #8<br />
Dark Yellow<br />
❑ #10<br />
Dark Amber<br />
❑ #13<br />
Amber<br />
❑ GBX2<br />
Dark Red<br />
zVoltage<br />
❑ 120<br />
❑Specify<br />
zOptions<br />
❑ PF<br />
Plaster Frame (Flange Only)<br />
zDoor Options<br />
❑ ADP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
*#1 Kodak Red Filter is standard.<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
DRS-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
DRS/4C<br />
Darkroom Safelight<br />
Luminaire<br />
Four Compartment<br />
Quadruple<br />
DIMENSIONS<br />
24 7 /8 "<br />
APPLICATIONS<br />
• X-ray processing<br />
• Photographic labs<br />
FEATURES<br />
• Quadruple compartment<br />
• Full range of Kodak filters available<br />
• Recessed or surface mounted<br />
FILTER<br />
FILTER<br />
23 3 /4"<br />
FILTER<br />
GLASS<br />
Ceiling cut out dims.<br />
22 13/16" x 24 3/16<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Brushed stainless steel housing<br />
available; see options.<br />
DOOR: Die formed, cold rolled steel door frame and lens retaining<br />
angles. Gasketed to prevent light leakage between compartments.<br />
Brushed stainless steel door available; see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Kodak #1 red filter standard for filter compartments. Prismatic<br />
tempered glass lens standard for lensed compartments. For other<br />
Kodak filter types, see options.<br />
LAMPS: Filter compartments use one medium base 15 watt (maximum)<br />
incandescent lamp. Lens compartment uses one 200 watt<br />
(maximum) medium base incandescent lamp. Lamps by others.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures. Recessed fixtures are thermally protected<br />
and have a prewired junction box mounted to top of housing.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
DRS/4C Darkroom Safelight Luminaire/Four Compartment<br />
ORDERING INFORMATION<br />
Example: DRS/4C-4/G-OA/#8-120<br />
DRS/4C<br />
zSeries<br />
z DRS/4C<br />
z# of Compartments<br />
❑ 4<br />
3 Filters/1 Lens<br />
zMounting<br />
❑ F<br />
Recessed Flange<br />
zFilter Type – Kodak<br />
(Specify for each filter compartment)<br />
❑ OA<br />
Greenish Yellow<br />
❑ OC<br />
Light Amber<br />
❑ #1*<br />
Red (Standard)<br />
❑ #1A<br />
Light Red<br />
❑ #2<br />
Dark Red<br />
❑ #3<br />
Dark Green<br />
❑ #6B<br />
Brown<br />
❑ #7B<br />
Green<br />
❑ #8<br />
Dark Yellow<br />
❑ #10<br />
Dark Amber<br />
❑ #13<br />
Amber<br />
❑ GBX2<br />
Dark Red<br />
zVoltage<br />
❑120<br />
❑Specify<br />
zOptions<br />
❑ PF<br />
Plaster Frame (Flange Only)<br />
zDoor Options<br />
❑ ADP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
*#1 Kodak Red Filter is standard.<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
DRS/4C-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MAL<br />
Medical Arm<br />
Luminaire<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Surgical facilities<br />
• Office surgery suites<br />
• Operating rooms<br />
• Clinics<br />
• Out-patient facilities<br />
• Hospitals<br />
FEATURES<br />
• Black concentric ring louver<br />
• Polished, dimpled reflector to<br />
increase spot intensity<br />
• 100 watt incandescent lamp<br />
• Centered, weighted base for<br />
mobility.<br />
SPECIFICATIONS<br />
CONSTRUCTION: Spun aluminum lighthead is extremely lightweight<br />
enclosing a black concentric ring louver to protect lamp.<br />
Handle constructed of polycarbonate.<br />
MOUNTING: Widely adjustable, heavy duty and calibrated, spring<br />
tensioned 45" swing arms, with completely concealed mechanism<br />
and tamper resistant joints. Available in floor mount complete with a<br />
castered weighted base for mobility.<br />
LAMP: One standard 100 watt incandescent lamp (included).<br />
OPTICS: Built in polished, dimpled reflector increases spot intensity<br />
and uniformity.<br />
FINISH: White.<br />
CERTIFICATION: UL and CSA approved.<br />
PRODUCT WARRANTY: Three years.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MAL Medical Arm Luminaire<br />
ORDERING INFORMATION<br />
Example: MAL-0163012<br />
MAL<br />
zSeries<br />
z MAL<br />
zDescription<br />
❑ 0163012<br />
Floorstand on Mobile Base<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MAL.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MBLA<br />
Medical<br />
Patient Bed Light<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
6 5 / 8 "<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Psychiatric<br />
FEATURES<br />
• Provides task and/or<br />
ambient lighting<br />
• Removable power tray<br />
for ease in maintenance<br />
• Welded construction<br />
• Louver or lens available<br />
5 3 / 4 "<br />
4 1 / 2 "<br />
48 1 / 8 "<br />
2 7 / 8 "<br />
4 3 / 8 "<br />
Cross Section<br />
38"<br />
Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, cold rolled steel housing with spot welded<br />
ends for rigidity. Designed to allow for direct or direct/indirect lighting.<br />
REFLECTOR: Cold rolled steel, reflector separates upper and lower<br />
lamp compartments.<br />
LENS: Available in louver or lens. See options.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MBLA Medical Patient Bed Light Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: MBLA-2/2/40T12-12PA/WECL-120-ESB-PCS<br />
MBLA<br />
zSeries<br />
z MBLA<br />
48" Nom. Length<br />
zLamp Count<br />
# Lamps Up<br />
❑ 0 (None)*<br />
❑ 1<br />
❑ 2<br />
# Lamps Down<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
*Upper lens opening<br />
covered with steel plate.<br />
zLens/Louver Options<br />
Up Lens<br />
❑ None*<br />
No Lens Up<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ WECL<br />
1/2" x 1/2" x 1/2"<br />
White Egg Crate Louver<br />
❑ SPCL<br />
1/2" x 1/2" x 1/2"<br />
SIlver Paracube Louver<br />
❑ LNS<br />
Specify Item<br />
Down Lens<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ WECL<br />
1/2" x 1/2" x 1/2"<br />
White Egg Crate Louver<br />
❑ SPCL<br />
1/2" x 1/2" x 1/2"<br />
SIlver Paracube Louver<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ DSR<br />
Duplex Receptacle ✝<br />
❑ DSR/HG<br />
Hospital Grade Receptacle ✝<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ GFI<br />
GFI Receptacle<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ RSW<br />
Rocker Switch †<br />
❑ PCS<br />
Pull Chain Switch<br />
On/Off †<br />
❑ PCS4<br />
Pull Chain Switch<br />
4 Position †<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
† 120 Volt Fixtures Only<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MBLA-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MCS<br />
Cool Spot<br />
Luminaire<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Surgical facilities<br />
• Clinics<br />
• Out-patient facilities<br />
• Birthing rooms<br />
FEATURES<br />
• 4000 footcandles at 1 meter<br />
• Fully adjustable<br />
• Variable intensity apeture wheel<br />
with high intensity switch<br />
• Variable spot size of 2"-10"<br />
• Color temperature at 4700 o K<br />
SPECIFICATIONS<br />
CONSTRUCTION: Spun aluminum lighthead is extremely lightweight<br />
and maneuverable. Lighthead allows for easy relamping without<br />
the use of tools. Handle constructed of polycarbonate.<br />
ARM MOVEMENT: Friction knob allows user to position selfbalancing<br />
arm without a tool; arm will not drift. Removable, autoclavable<br />
center SteriHandle allows for removal or replacement with one hand<br />
for assuring sterile procedures.<br />
MOUNTING: Six mounting options provide flexiblity, available in single<br />
ceiling, double ceiling, wall mount and track mounted with a single<br />
or double trolley. Floor stand units include footswitch, locking<br />
casters and cord wrap.<br />
LAMP: One 150 watt halogen lamp features over 500 hour lamp life<br />
with a color temperature of 4700 0 K.<br />
WIRING: Internal 12 volt step down transformer, 120 volt input standard.<br />
Dual-pin ceramic lamp sockets. 5 amp rocker switch. Wall<br />
mount and floor stand units supplied with 8', 18/3, 3 power cord with<br />
hospital grade plug.<br />
OPTICS: Variable spot size of 2" - 10". <strong>Inc</strong>ludes a variable intensity<br />
apeture wheel with a high intensity switch. Intensity at 1 meter is<br />
4000+ footcandles.<br />
FINISH: Light grey.<br />
CERTIFICATION: Mounting systems meet California Seismic<br />
Codes. UL and CSA approved.<br />
PRODUCT WARRANTY: Three years.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MCS Medical Cool Spot Luminaire<br />
ORDERING INFORMATION<br />
Example: MCS-0244322-0008100PK<br />
MCS<br />
zSeries<br />
z MCS<br />
zDescription<br />
❑ 0244312<br />
Floor Stand (Casters <strong>Inc</strong>luded)<br />
❑ 0244322<br />
Single Ceiling<br />
❑ 0244332<br />
Double Ceiling<br />
❑ 0244342<br />
Wall Mount<br />
❑ 0204370 _*<br />
Track Mounted with Single Trolley<br />
❑ 0204372_*<br />
Track Mounted with Double Trolley<br />
zAccessories<br />
❑ 0007006PK<br />
Set of 4 EKE Replacement Bulbs<br />
❑ 1007696 _*<br />
Universal SteriHandle Replacement Model<br />
❑ 0008100PK _*<br />
Disposable Light Covers - Set of 25 Sterile Packs of 1 each<br />
*One handle and Disposable Light Cover are included with complete light.<br />
*Track Length is 6'.<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MCSL.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
5ft<br />
MDI<br />
Medical<br />
Direct/Indirect<br />
Wall Luminaire<br />
2/40T8<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Psychiatric units<br />
FEATURES<br />
• Direct/indirect light<br />
• Seperate switching<br />
• Divided compartment<br />
• Suitable for continuous row<br />
mounting<br />
8 3 / 8 "<br />
3"<br />
Cross Section<br />
SPECIFICATIONS<br />
HOUSING: Die formed from 20 gauge cold rolled steel with continuously<br />
welded and ground seams.<br />
REFLECTOR: Cold rolled steel, reflector separates upper and<br />
lower lamp compartments.<br />
LENS RETENTION: Lens is slid into three sided lens retention slot<br />
and is held captive by front cover plate.<br />
FRONT COVER PLATE: Die formed from cold rolled steel with<br />
continuously welded and ground seams attaches to housing with<br />
four fasteners.<br />
LENS: Uplight/Downlight lens .125” prismatic acrylic.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Four stainless steel fasteners standard.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MDI 5ft Medical Direct/Indirect Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: MDI-2/40T8-12PA-120-ESB2<br />
MDI<br />
zSeries<br />
z MDI<br />
61" Nom. Length<br />
zLamp Count<br />
❑ 2<br />
zLamp Type<br />
❑ 40T8<br />
❑ LMP (Specify)<br />
zLens Options<br />
Uplight/Downlight Lens<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MDI.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MGNS<br />
Medical Surgical<br />
Satelite Luminaire<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Surgical facilities<br />
• Clinics<br />
• Out-patient facilities<br />
• Birthing rooms<br />
FEATURES<br />
• 10,000 footcandles at 1 meter<br />
• 360 o continuous rotation<br />
• 44" mounting arm<br />
• Color temperature at 4400 o K<br />
• Continuous dimming control<br />
• Aesthetic design; smooth front<br />
cover for easy cleaning<br />
SPECIFICATIONS<br />
CONSTRUCTION: 30" diameter spun aluminum lighthead is<br />
extremely lightweight and maneuverable. Lighthead allows for easy<br />
relamping without the use of tools. Handle constructed of polycarbonate.<br />
ARM MOVEMENT: Arm movement allows for 44" vertical adjustment<br />
and 360 o<br />
rotation. Removable, autoclavable handle accepts sterile<br />
covers and allows for convenient focus control.<br />
MOUNTING: Two mounting options provide flexiblity, available in<br />
single ceiling, and double ceiling mount.<br />
LAMP: Six 50 watt halogen lamps feature over 1500 hour lamp life.<br />
Intensity at 1 meter is 10,000+ footcandles with a color temperature<br />
of 4400 o K.(Lamps included.)<br />
CONTROL PANEL: Offers continous dimming control. Panel<br />
includes intensity adjustment and storage area for extra bulbs and<br />
fuses.<br />
WIRING: Internal 12 volt step down transformer, 120 volt input standard.<br />
Dual-pin ceramic lamp sockets. 5 amp rocker switch.<br />
OPTICS: Field size (maximum at 1 meter): 6-10 inches. Focal<br />
length: variable. Depth of field: 17” without refocusing.<br />
FINISH: Light grey.<br />
CERTIFICATION: UL and CSA approved.<br />
PRODUCT WARRANTY: Three years.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MGNS Medical Surgical Suite Luminaire<br />
ORDERING INFORMATION<br />
Example: MGNS-0100132-0002004PK<br />
MGNS<br />
zSeries<br />
z MGNS<br />
zDescription<br />
❑0100122<br />
Double Ceiling<br />
❑0100132<br />
Mount Combo<br />
❑0600192<br />
MGN/MGNS<br />
zAccessories<br />
❑0002004PK<br />
Set of 6, 50 Watt Halogen Bulbs<br />
❑2100288<br />
Replacement /Spare Handle<br />
❑2100374<br />
Steel Plate Assembly for Special Height Ceilings<br />
❑0008100PK<br />
Burton Disposable Light Covers- Set of 25 Sterile Packs of 1ea.-Note<br />
#9<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MGNS.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MOL<br />
Outpatient Light for<br />
Surgical Procedures and<br />
Examinations<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Surgical facilities<br />
• Clinics<br />
• Out-patient facilities<br />
• Birthing rooms<br />
FEATURES<br />
• Energy efficient cool beam lamps<br />
• Fully adjustable<br />
• 2000 hour lamp life<br />
• Continuous operation safeguard<br />
• Shadow reduction<br />
SPECIFICATIONS<br />
CONSTRUCTION: Formed Lexan housing and handle. Zinc diecast<br />
yoke and fittings. 16 gauge welded steel arms. 11 gauge welded<br />
steel extension arm. Dichronic reflectors.<br />
ARM MOVEMENT: Mounting arm is counter balanced for precision<br />
placement and drift-free positioning.<br />
MOUNTING: Six mounting options provide flexiblity; available in single<br />
ceiling, double ceiling, wall mount and track mounted with a single<br />
or double trolley. Floor stand units include foot switch, locking<br />
casters and cord wrap.<br />
LAMPS: Three 12V, 50 watt halogen lamps feature over 2000 hour<br />
lamp life and provide enough light for office surgical use. Lamp placement<br />
eliminates shadows. (Lamps included.)<br />
WIRING: Internally mounted, 120V/12V step down transformer.<br />
Dual-pin ceramic lamp sockets. 5 amp rocker switch. Wall mount<br />
and floor stand units supplied with 8', 18/3, 3 power cord with hospital<br />
grade plug.<br />
OPTICS: Intensity at 24" is 7000+ footcandles, provide 3600 o K color<br />
corrected illumination for true tissue color visualization.<br />
FINISH: Light grey<br />
CERTIFICATION: Mounting systems meet California Seismic codes.<br />
UL and CSA approved.<br />
PRODUCT WARRANTY: Three years.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MOL Medical Outpatient Light for Surgical Procedures and Exams<br />
ORDERING INFORMATION<br />
Example: MOL-0224112-0008100PK<br />
MOL<br />
zSeries<br />
z MOL<br />
zDescription<br />
❑0224112<br />
Floor Stand (Casters <strong>Inc</strong>luded)<br />
❑0224122<br />
Single Ceiling<br />
❑0224132<br />
Double Ceiling<br />
❑0224142<br />
Wall Mount<br />
❑0204470 _*<br />
Track Mounted with Single Trolley<br />
❑0204472_*<br />
Track Mounted with Double Trolley<br />
zAccessories<br />
❑0006130PK<br />
Set of 3 Hi-Intensity 50 Watt FTY Bulbs<br />
❑1008428 _*<br />
SteriHandle Replacement Model<br />
❑0007100<br />
Dimmer Switch (Wall)<br />
❑0008100PK _*<br />
Disposable Light Covers - Set of 25 Sterile Packs of 1 each<br />
*One handle and Disposable Light Cover are included with complete light.<br />
*Track Length is 6'.<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MOL.02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MPEA/MRI<br />
Recessed Quartz<br />
MRI Luminaire<br />
Asymmetrical<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
12 3 / 8 "<br />
5 3 / 4 "<br />
11 1 / 4 "<br />
• MRI<br />
• Asymmetrical distribution<br />
• Specular aluminum reflector<br />
• Constructed of all non-ferrous<br />
12 3 / 8 "<br />
5 3 / 4 "<br />
9 15 / 16 "<br />
Exposed View<br />
Ceiling cut out dimensions<br />
11 1 / 2" x 11 1 / 2"<br />
Cross Section<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, die formed, aluminum housing and end<br />
caps.<br />
DOOR: One piece aluminum door frame with die formed edges and<br />
tightly closed corners for increasing rigidity. Angled lens opening for<br />
asymmetrical distribution.<br />
REFLECTOR: Specular aluminum reflector.<br />
LENS: Heat resistant fresnel lens provides optimum distribution.<br />
LAMP: One 250 watt quartz, mini-candelabra base lamp (by others).<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures. Fixture is thermally protected.<br />
MOUNTING: Aluminum plaster frame and adjustable mounting<br />
angles secure fixture in ceiling. Frame and fixture can be installed<br />
from below ceiling.<br />
FINISH: White housing and matte black door. Finished in polyester<br />
powder coat finish over multi-stage phosphatizing pretreatment to<br />
ensure superior paint adhesion and rust resistance. Reflectance:<br />
93%.<br />
FASTENERS: Machine screws secure through captive cage nuts.<br />
For tamper proof fasteners see options.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MPEA Recessed Quartz Patient Exam Luminaire Asymmetrical<br />
ORDERING INFORMATION<br />
MPEA/MRI<br />
Example: MPEA/MRI-250Q-FRL-120<br />
zSeries<br />
z MPEA/MRI<br />
1' x 1' Nom. Size<br />
zLamp Type<br />
❑ 250Q<br />
zLens Options<br />
❑ FRL<br />
Fresnel Lens<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
MPEA.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MPES<br />
Recessed Quartz<br />
Patient Exam Luminaire<br />
Symmetrical<br />
DIMENSIONS<br />
APPLICATION<br />
FEATURES<br />
12 3 / 8 "<br />
5 3 / 4 "<br />
11 1 / 4 "<br />
• Hospitals<br />
• Clinics<br />
• Birthing rooms<br />
• Laboratories<br />
• Psychiatric<br />
• Patient bed light<br />
• Symmetrical distribution<br />
• Specular aluminum reflector<br />
• Fresnel lens for optimum<br />
distribution<br />
12 3 / 8 "<br />
5 3 / 4 "<br />
9 15 / 16 "<br />
Exposed View<br />
Ceiling cut out dimemsions<br />
11 1 / 2 " x 11 1 / 2 "<br />
Cross Section<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, die formed, 18 gauge, cold rolled steel<br />
housing and end caps. Other housing options available (see<br />
Options).<br />
DOOR: One piece, 16 gauge, cold rolled steel door frame with die<br />
formed edges and tightly closed corners for increasing rigidity.<br />
REFLECTOR: Specular aluminium reflector.<br />
LENS: Heat resistant fresnel lens provides optimum symmetrical<br />
distribution.<br />
LAMP: One 250 watt quartz, mini-candelabra base lamp<br />
(by others).<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures. Fixture is thermally protected.<br />
MOUNTING: Plaster frame and adjustable mounting angles secure<br />
fixture in ceiling. Frame and fixture can be installed from below<br />
ceiling.<br />
FINISH: White housing and matte black door. Finished in polyester<br />
powder coat finish over multi-stage phosphatizing pretreatment to<br />
ensure superior paint adhesion and rust resistance. Reflectance:<br />
93%.<br />
FASTENERS: Stainless steel machine screws secure through captive<br />
cage nuts. For tamperproof fasteners see options.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MPES Recessed Quartz Patient Exam Luminaire Symmetrical<br />
ORDERING INFORMATION<br />
MPES<br />
Example: MPES-250Q-FRL-120<br />
zSeries<br />
z MPES<br />
1' x 1' Nom. Size<br />
zLamp Type<br />
❑ 250Q<br />
zLens Options<br />
❑ FRL<br />
Fresnel Lens<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MPES-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x4<br />
MRFA14<br />
Medical<br />
One Piece Door<br />
Flange Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
5"<br />
12"<br />
Cross Section<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• One piece overlap door<br />
• Symmetric/asymmetric lens<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
10 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth<br />
environmental side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRFA14 1x4 Medical One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: MRFA14-2/32T8-ASY-120-ESB-SDN<br />
MRFA14<br />
zSeries<br />
z MRFA14<br />
1' x 4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF14<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRFA14-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x2<br />
MRFA22<br />
Medical<br />
One Piece Door<br />
Flange Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
6/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
6/20T12<br />
2/32U6<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
2/50BX<br />
3/50BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• One piece overlap door<br />
• Symmetric/asymmetric lens<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Ceiling cut out dims.<br />
22 13/16" x 24 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRFA22 2x2 Medical One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: MRFA22-3/40BX-ASY-120-ESB-SDN<br />
MRFA22<br />
zSeries<br />
z MRFA22<br />
2' x 2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 6<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U6 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (4 max.)<br />
❑ 50BX (4 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF22<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#: MRFA22-<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRFA22/BX-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x4<br />
MRFA24<br />
Medical<br />
One Piece Door<br />
Flange Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
6/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
6/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Emergency rooms<br />
• Laboratories<br />
• Pharmaceutical<br />
• One piece overlap door<br />
• Symmetric/asymmetric lens<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
22 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRFA24 2x4 Medical One Piece Door Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: MRFA24-6/32T8-ASY-120-ESB-SDN<br />
MRFA24<br />
zSeries<br />
z MRFA24<br />
2' x 4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 6<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF24<br />
Plaster Frame<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRFA24-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x4<br />
MRGA14<br />
Medical<br />
One Piece Door<br />
Grid Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
12"<br />
• Surgical Suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• One piece overlap door<br />
• Symmetric/asymmetric lens<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
• Accommodates up to 1 1/2"<br />
T-bar standard.<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door seals<br />
against ceiling. Silicone gasketing integrates door frame and lens to<br />
form a permanent hermetic seal. For other door materials see<br />
options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to ceiling and perimeter of<br />
housing to seal housing to ceiling. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRGA14 1x4 Medical One Piece Door Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: MRGA14-3/32T8-ASY-120-ESB-SDN<br />
MRGA14<br />
zSeries<br />
z MRGA14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRGA14-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x2<br />
MRGA22<br />
Medical<br />
One Piece Door<br />
Grid Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
6/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
6/20T12<br />
2/32U6<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
2/50BX<br />
3/50BX<br />
DIMENSIONS<br />
5"<br />
24"<br />
Cross Section<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door sandwiches<br />
'T' grid to yield the best possible seal. Silicone gasketing integrates<br />
door frame and lens to form a permanent hermetic seal. For<br />
other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to 'T' grid and perimeter of<br />
housing to seal housing to 'T' grid. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRGA22 2x2 Medical One Piece Door Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: MRGA22-3/40BX-ASY-120-ESB-SDN<br />
MRGA22<br />
zSeries<br />
z MRGA22<br />
2'x2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 6<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U6 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (4 max.)<br />
❑ 50BX (4 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRGA22-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x4<br />
MRGA24<br />
Medical<br />
One Piece Door<br />
Grid Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
6/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
6/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• One piece overlap door<br />
• Symmetric/asymmetric lens<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
• Accommodates up to 1 1/2"<br />
T-bar standard.<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die formed, one piece, seamless cold rolled steel door sandwiches<br />
'T' grid to yield the best possible seal. Silicone gasketing integrates<br />
door frame and lens to form a permanent hermetic seal. For<br />
other door materials see options.<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Triple gasketed. Closed cell neoprene gasketing surrounds<br />
perimeter of door to seal door to 'T' grid and perimeter of<br />
housing to seal housing to 'T' grid. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRGA24 2x4 Medical One Piece Door Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: MRGA24-6/32T8-ASY-120-ESB-SDN<br />
MRGA24<br />
zSeries<br />
z MRGA24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 6<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRGA24-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MRI<br />
Magnetic Resonance Imaging<br />
Non-Ferrous (Aluminum)<br />
Recessed Luminaire<br />
1/150I<br />
DIMENSIONS<br />
14 1 / 4 "<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Surgical facilities<br />
• Clinics<br />
• Out-patient facilities<br />
• Birthing rooms<br />
FEATURES<br />
• 14 gauge aluminum door<br />
• 18 gauge aluminum housing<br />
• Spun aluminum reflector<br />
• Tamperproof screws<br />
8"<br />
11 1 / 2 "<br />
14 5 / 8 " sq. opening<br />
15 3 / 8 "<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, die formed, 18 gauge, aluminum housing<br />
and end caps.<br />
DOOR: One piece, 16 gauge, aluminum door frame with die formed<br />
edges and tightly closed corners for increased rigidity.<br />
LENS: Lens to be specified. See lens options.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
REFLECTOR: Spun, satin finish aluminum reflector.<br />
GASKETING: Polyurethane gasketing seals against outside contaminants.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance.<br />
CERTIFICATION: UL listed and labeled. CSA approved.<br />
SOCKET: Medium base, porcelain socket, aluminum screwshell and<br />
150° silicone braid leads. 4000V pulse rated (for use with HID<br />
lamps).<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRI Magnetic Resonance Imaging (Aluminum) Recessed Luminaire<br />
ORDERING INFORMATION<br />
Example: MRI-150I-15PP-120<br />
MRI<br />
zSeries<br />
z MRI<br />
zLamp Type<br />
<strong>Inc</strong>andescent<br />
❑ 150<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
zVoltage<br />
❑120<br />
Environment Side<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
Drop Lens<br />
❑ DPR<br />
Dropped Prismatic<br />
Polycarbonate Refractor<br />
❑ LNS<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRI-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MRL<br />
Reflector Light for<br />
Minor Surgical Exams<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Surgical facilities<br />
• Clinics<br />
• Out-patient facilities<br />
• Birthing rooms<br />
FEATURES<br />
• 2000 footcandles 24" from light<br />
source<br />
• Color corrected<br />
• Wrap around handle<br />
• Available in 12" or 14" reflectors<br />
• Shadow reduction<br />
SPECIFICATIONS<br />
CONSTRUCTION: Polycarbonate wraparound handles with a spun<br />
aluminum reflector.<br />
ARM MOVEMENT: Counter balanced, spring tension mountings and<br />
wraparound handles provide greater flexiblity and focus control.<br />
MOUNTING: Four mounting options provide flexibility, available in<br />
single head ceiling mount, double head ceiling mount and wall mount<br />
with extended arm. Floor stand units include footswitch, locking casters<br />
and cord wrap.<br />
REFLECTOR: Specular Alzak spun aluminum reflector enhances<br />
reflectivity and corrosion resistance. Available in 12" or 14" housings.<br />
LAMP: One 150 watt incandescent lamp that virtually produces natural<br />
daylight.<br />
WIRING: Available with 120 or 277 volt operation, medium base<br />
porcelain socket.<br />
OPTICS: Lamp is housed in a heat absorbing color corrected glass<br />
cylinder.<br />
FINISH: Light grey.<br />
CERTIFICATION: Mounting systems meet California Seismic codes.<br />
UL and FDA listed. CSA approved models available.<br />
PRODUCT WARRANTY: Three years.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRL Medical Reflector Light for Minor Surgical Exams<br />
ORDERING INFORMATION<br />
Example: MRL-0112212-0008100PK<br />
MRL<br />
Only Choose One Option From Model Description, See Example.<br />
zSeries<br />
z MRL<br />
z120 V Model Description<br />
12" Reflector<br />
❑0112012<br />
12" Reflector Light<br />
Floor Stand Model (Casters <strong>Inc</strong>luded)<br />
❑0112022<br />
12" Reflector Light<br />
Single Head Ceiling Mount<br />
❑0112032<br />
12" Reflector Light<br />
Double Head Ceiling Mount<br />
❑0112042<br />
12" Reflector Light<br />
Extended Arm Wall Mount<br />
z277 V Model Description<br />
12" Reflector<br />
❑0112212<br />
12" Reflector Light<br />
Floor Stand Model (Casters <strong>Inc</strong>luded)<br />
❑0112222<br />
12" Reflector Light<br />
Single Head Ceiling Mount<br />
❑0112232<br />
12" Reflector Light<br />
Double Head Ceiling Mount<br />
❑0112242<br />
12" Reflector Light<br />
Extended Arm Wall Mount<br />
zAccessories<br />
❑0001123PK<br />
Set of 4 <strong>Inc</strong>andescent Bulbs 120V<br />
❑0006126PK<br />
Set of 4 Halogen Replacement Bulbs 120V<br />
❑0001124PK<br />
Set of 4 Halogen Replacement Bulbs 277V<br />
❑1006760<br />
Replacement Heat Glass Cylinder<br />
❑1007151<br />
Extension Arm for Ceiling Reflectors<br />
❑1007101<br />
Reflector SteriHandle Assembly model - set of 2<br />
❑1003016<br />
29" Drip Tube Rod<br />
14" Reflector<br />
❑0113012<br />
14" Reflector Light<br />
Floor Stand Model (Casters <strong>Inc</strong>luded)<br />
14" Reflector<br />
❑0113212<br />
14" Reflector Light<br />
Floor Stand Model (Casters <strong>Inc</strong>luded)<br />
❑0008100PK _*<br />
Disposable Light Covers - Set of 25 Sterile Packs of 1<br />
each<br />
❑0113022<br />
14" Reflector Light<br />
Single Head Ceiling Mount<br />
❑0113032<br />
14" Reflector Light<br />
Double Head Ceiling Mount<br />
❑0113222<br />
14" Reflector Light<br />
Single Head Ceiling Mount<br />
❑0113232<br />
14" Reflector Light<br />
Double Head Ceiling Mount<br />
*One handle and Disposable Light Cover are included<br />
with complete light.<br />
❑0113042<br />
14" Reflector Light<br />
Extended Arm Wall Mount<br />
❑0113242<br />
14" Reflector Light<br />
Extended Arm Wall Mount<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Ordering Notes:<br />
Approval:<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
MRL.02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x1<br />
MRLA11<br />
Medical<br />
Recessed Grid<br />
Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Standard Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options).<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRLA11 1x1 Medical Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: MRLA11-2/13TT-12PA-120-ELB-ALX-TX<br />
MRLA11<br />
zSeries<br />
z MRLA11<br />
1'x1' Nom. Size<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRLA11-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x2<br />
MRLA12<br />
Medical<br />
Recessed Grid<br />
Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
12"<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece, die formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options).<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
Standard Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRLA12 1x2 Medical Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: MRLA12-2/40BX-12PA-120-ESB-ALX-TX<br />
MRLA12<br />
zSeries<br />
z MRLA12<br />
1'x2' Nom. Size<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRLA12-01© Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x4<br />
MRLA14<br />
Medical<br />
Recessed Grid<br />
Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
12"<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutcal<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece, die formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options).<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
Standard Door Detail<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRLA14 1x4 Medical Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: MRLA14-2/32T8-12PA-120-ESB-ALX-TX<br />
MRLA14<br />
zSeries<br />
z MRLA14<br />
1'x4' Nom. Size<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRLA14-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x2<br />
MRLA22<br />
Medical<br />
Recessed Grid<br />
Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Standard Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options<br />
available (see Options).<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and<br />
lens to form a tight seal. Other door options available (see<br />
Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth<br />
environmental side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating<br />
A, CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRLA22 2x2 Medical Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: MRLA22-2/40U6-12PA-120-ESB-ALX-TX<br />
MRLA22<br />
zSeries<br />
z MRLA22<br />
2’ x 4’ Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (3 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125” Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125” Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2” Wide ‘T’ Grid<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRLA22-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x4<br />
MRLA24<br />
Medical Recessed<br />
Grid Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
6/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
6/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
• Accommodates up to 1 1/2"<br />
T-bar standard<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Standard Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options).<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRLA24 2x4 Medical Recessed Grid Luminaire<br />
ORDERING INFORMATION<br />
Example: MRLA24-6/32T8-12PA-120-ESB-ALX-TX<br />
MRLA24<br />
zSeries<br />
z MRLA24<br />
2'x 4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 6<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ 2TE<br />
Accommodates 2" Wide 'T' Grid<br />
(Extends housing)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRLA24-01-6LAMP © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x1<br />
MRRA11<br />
Medical<br />
Recessed Flange<br />
Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location (optional)<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
11 3 / 4 "<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
10 13/16" x 12 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Standard Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options).<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRRA11 1x1 Medical Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: MRRA11-2/13TT-12PA-120-NPF-ALX<br />
MRRA11<br />
zSeries<br />
z MRRA11<br />
1'x1' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF11<br />
Plaster Frame<br />
❑ WL<br />
Wet Location<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRRA11-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x2<br />
MRRA12<br />
Medical<br />
Recessed Flange<br />
Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location (optional)<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
11 3 / 4 "<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling Cut Out Dims.<br />
10 13/16" x 24 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Standard Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options).<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating<br />
A, CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRRA12 1x2 Medical Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: MRRA12-2/17T8-12PA-120-ESB-ALX-TX<br />
MRRA12<br />
zSeries<br />
z MRRA12<br />
1'x2' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF12<br />
Plaster Frame<br />
❑ WL<br />
Wet Location<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRRA12-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x4<br />
MRRA14<br />
Medical<br />
Recessed Flange<br />
Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location (optional)<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
11 3 / 4 "<br />
Cross Section<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling cut out dims.<br />
10 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Standard Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal. Other housing options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four SWING GATE hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRRA14 1x4 Medical Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: MRRA14-2/32T8-12PA-120-ESB-ALX<br />
MRRA14<br />
zSeries<br />
z MRRA14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF14<br />
Plaster Frame<br />
❑ WL<br />
Wet Location<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRRA14-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x2<br />
MRRA22<br />
Medical<br />
Recessed Flange<br />
Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
23 3 / 4 "<br />
Cross Section<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• Internal extruded aluminum door<br />
• Wet location (optional)<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Ceiling Cut Out Dims.<br />
22 13/16" x 24 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Anodized, extruded aluminum, inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens<br />
to form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
Standard Door Detail<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing<br />
on all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRRA22 2x2 Medical Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: MRRA22-2/40U6-12PA-120-ESB-ALX<br />
MRRA22<br />
zSeries<br />
z MRRA22<br />
2'x2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (3 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify row length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF22<br />
Plaster Frame<br />
❑ WL<br />
Wet Location<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRRA22-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x4<br />
MRRA24<br />
Medical<br />
Recessed Flange<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
6/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
6/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• Internal extruded aluminum door<br />
• Symmetric/asymmetric lens<br />
• Wet location (optional)<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
• Continuous tig weld seams<br />
7/8" Dia. K.O.'s<br />
Top View<br />
Ceiling Cut Out Dims.<br />
22 13/16" x 48 3/16"<br />
Consult factory for<br />
continuous row mount.<br />
Standard Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Anodized, extruded aluminum, insert door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens to<br />
form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of lens to seal lens to door frame.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
MOUNTING: Four swing gate hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MRRA24 2x4 Medical Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
Example: MRRA24-6/32T8-12PA-120-ESB-SDN<br />
MRRA24<br />
zSeries<br />
z MRRA24<br />
2' x 4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 6<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continuous Row Mounting<br />
(Specify Row Length)<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ PF24<br />
Plaster Frame<br />
❑ WL<br />
Wet Location<br />
zDoor Options<br />
❑ ALXP<br />
Anodized Extruded Aluminum Door Painted White<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MRRA24-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x4<br />
MSIA14<br />
Medical Surface<br />
Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
5"<br />
12"<br />
Cross Section<br />
14" 14" 14"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
7"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens to<br />
form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations. For hose down applications please consult factory.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSIA14 1x4 Medical Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: MSIA14-2/32T8-12PA-120-ESB<br />
MSIA14<br />
zSeries<br />
z MSIA14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSIA14-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x4<br />
MSIA24<br />
Medical<br />
Surface<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
24"<br />
Cross Section<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
• Internal extruded aluminum door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell neoprene gasketing<br />
• Smooth lens surface<br />
14" 14" 14"<br />
14"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Standard Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece, die formed, 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Anodized, extruded aluminum inset door frame with integral<br />
lens channel. Continuous gasketing integrates door frame and lens to<br />
form a tight seal. Other door options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSIA24 2x4 Medical Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: MSIA24-2/32T8-12PA-120-ESB<br />
MSIA24<br />
zSeries<br />
z MSIA24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125" Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALX<br />
Anodized Extruded Aluminum Door<br />
(Standard)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSIA24-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MSL<br />
Medical Surgery<br />
Luminaire<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Surgical facilities<br />
• Clinics<br />
• Out-patient facilities<br />
• Birthing rooms<br />
FEATURES<br />
• Energy efficient cool beam lamps<br />
• Fully adjustable<br />
• 2000 hour lamp life<br />
• Continuous operation safeguard<br />
• Shadow reduction<br />
SPECIFICATIONS<br />
CONSTRUCTION: Formed Lexan housing and handle. Zinc diecast<br />
yoke and fittings. 16 gauge welded steel arms. 11 gauge welded<br />
steel extension arm. Dichronic reflectors.<br />
ARM MOVEMENT: Mounting arm is counter balanced for precision<br />
placement and drift free positioning.<br />
MOUNTING: Available in single head ceiling mount.<br />
LAMPS: Four 12V, 50 watt focusable halogen lamps and a prefocused<br />
halogen center lamp feature over 2000 hour lamp life and<br />
provide enough light for office surgical use. Lamps operate in parallel<br />
to assure continuous illumination. Lamp placement eliminates<br />
shadows.<br />
WIRING: Internally mounted, 120V/12V step down transformer.<br />
Dual-pin ceramic lamp sockets. 5 amp rocker switch.<br />
OPTICS: Intensity at 24" is 7000+ footcandles, provide 3200 o K color<br />
corrected illumination for true tissue color visualization.<br />
FINISH: Light grey<br />
CERTIFICATION: Mounting systems meet California Seismic codes.<br />
UL and CSA approved.<br />
PRODUCT WARRANTY: One year.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSL Medical Surgery Luminaire<br />
ORDERING INFORMATION<br />
Example: MSL-0171020-0001116PK<br />
MSL<br />
zSeries<br />
z MSL<br />
zDescription<br />
❑0171020<br />
Single Head Ceiling Mount - 120V<br />
❑0171222<br />
Single Head Ceiling Mount - 277V<br />
zAccessories<br />
❑0001116PK<br />
Set of 6 Replacement Bulbs (EPZ)<br />
❑1007346<br />
Set of two Surgery Light Handles<br />
❑1007369<br />
Surgery Light Installation Kit<br />
❑0007100<br />
Dimmer Switch (Wall)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSL.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1X1<br />
MSOA11<br />
Medical<br />
One Piece Door<br />
Surface Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/28QD<br />
2/28QD<br />
1/38DD<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
8"<br />
8"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
SPECIFICATIONS<br />
Top View<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. Other door<br />
options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Four stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSOA11 1X1 Medical One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: MSOA11-2/13TT-12PA-120-HPF-SDN<br />
MSOA11<br />
zSeries<br />
z MSOA11<br />
1'x1' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 28QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125” Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125” Prismatic Acrylic with Radio<br />
Frequency Shieding Grid<br />
❑ 12PP<br />
.125” Prismatic Polycarbonate<br />
❑ 15PG<br />
.156” Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSOA11-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x2<br />
MSOA12<br />
Medical<br />
One Piece Door<br />
Surface Luminaire<br />
1/17T8<br />
2/17T8<br />
3/17T8<br />
1/20T12<br />
2/20T12<br />
3/20T12<br />
1/40BX<br />
2/40BX<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
18"<br />
8"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. Other door<br />
options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSOA12 1x2 Medical One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: MSOA12-2/17T8-12PA-120-ESB-SDN<br />
MSOA12<br />
zSeries<br />
z MSOA12<br />
1'x2' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 40BX (2 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125” Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125” Prismatic Acrylic with Radio<br />
Frequency Shieding Grid<br />
❑ 12PP<br />
.125” Prismatic Polycarbonate<br />
❑ 15PG<br />
.156” Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSOA12-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
1x4<br />
MSOA14<br />
Medical<br />
One Piece Door<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
5"<br />
12"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
14" 14" 14"<br />
7"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. Other door<br />
options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSOA14 1X4 Medical One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: MSOA14-2/32T8-ASY-120-ESB-SDN<br />
MSOA14<br />
zSeries<br />
z MSOA14<br />
1'x4' Nom. Size<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125” Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125” Prismatic Acrylic with Radio<br />
Frequency Shieding Grid<br />
❑ 12PP<br />
.125” Prismatic Polycarbonate<br />
❑ 15PG<br />
.156” Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSOA14-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x2<br />
MSOA22<br />
Medical<br />
One Piece Door<br />
Surface Luminaire<br />
2/17T8<br />
3/17T8<br />
4/17T8<br />
2/20T12<br />
3/20T12<br />
4/20T12<br />
2/32U3<br />
2/32U6<br />
2/40U3<br />
2/40U6<br />
2/40BX<br />
3/40BX<br />
DIMENSIONS<br />
5"<br />
24"<br />
APPLICATIONS<br />
• Surgical Suites<br />
• Emergency Rooms<br />
• Laboratories<br />
• Operating Rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
18"<br />
20"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. Other door<br />
options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
Door Detail<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, Energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSOA22 2x2 Medical One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: MSOA22-2/17T8-ASY-120-ESB-SDN<br />
MSOA22<br />
zSeries<br />
z MSOA22<br />
2'x2' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 32U3 (2 max.)<br />
❑ 32U6 (2 max.)<br />
❑ 40U3 (2 max.)<br />
❑ 40U6 (2 max.)<br />
❑ 40BX (3 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125” Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125” Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125” Prismatic Polycabonate<br />
❑ 15PG<br />
.156” Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSOA22-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2x4<br />
MSOA24<br />
Medical<br />
One Piece Door<br />
Surface Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
5"<br />
24"<br />
APPLICATIONS<br />
• Surgical suites<br />
• Emergency rooms<br />
• Laboratories<br />
• Operating rooms<br />
• Pharmaceutical<br />
FEATURES<br />
• One piece overlap door<br />
• Wet location listed<br />
• Sealed, hole free housing<br />
• Closed cell gasketing<br />
• Smooth lens surface<br />
Cross Section<br />
14" 14" 14"<br />
14"<br />
3 /8 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
Top View<br />
Door Detail<br />
SPECIFICATIONS<br />
HOUSING: One piece die-formed 20 gauge cold rolled steel housing<br />
with continuously tig welded seams. Other housing options available<br />
(see Options). Contains no holes that would allow air passage.<br />
DOOR: Die-formed, one piece, seamless cold rolled steel door<br />
yields the best possible seal. Silicone gasketing integrates door<br />
frame and lens to form a permanent hermetic seal. Other door<br />
options available (see Options).<br />
HINGE: Two aircraft cable hinges support door frame and are easily<br />
disconnected for installation and maintenance.<br />
LENS: Installed with internal prism pattern to maintain smooth environmental<br />
side. See lens options.<br />
GASKETING: Closed cell neoprene gasketing surrounds perimeter<br />
of door to seal door to housing. Silicone gasket seals lens to door.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Ten stainless steel machine screws secure through<br />
sealed captive nuts and are evenly spaced to compress gasketing on<br />
all sides.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations. For hose down applications please consult factory.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSOA24 2x4 Medical One Piece Door Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: MSOA24-2/32T8-12PA-120-ESB-SDN<br />
MSOA24<br />
zSeries<br />
z MSOA24<br />
2'x4' Nom. Size<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ ASY<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution<br />
❑ ASY/RFI<br />
Extruded Acrylic, Symmetric/<br />
Asymmetric Distribution with<br />
Radio Frequency Shielding Grid<br />
❑ 12PA<br />
.125” Prismatic Acrylic<br />
❑ 12PA/RFI<br />
.125” Prismatic Acrylic with Radio<br />
Frequency Shielding Grid<br />
❑ 12PP<br />
.125” Prismatic Polycabonate<br />
❑ 15PG<br />
.156” Prismatic Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Type:<br />
Cat#<br />
Date:<br />
Remarks:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSOA24-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
MSS<br />
Surgical Suite<br />
Luminaire<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Surgical facilities<br />
• Clinics<br />
• Out-patient facilities<br />
• Birthing rooms<br />
FEATURES<br />
• 6000 footcandles at 1 meter<br />
• 360 o continuous rotation<br />
• 44" mounting arm<br />
• Color temperature at 4300 o K<br />
• Fixed focusing<br />
SPECIFICATIONS<br />
CONSTRUCTION: 16" diameter spun aluminum lighthead is<br />
extremely lightweight and maneuverable. Lighthead allows for easy<br />
relamping from the back without the use of tools. Handle constructed<br />
of polycarbonate.<br />
ARM MOVEMENT: Arm movement allows for 44" vertical adjustment<br />
and 360 o rotation.<br />
MOUNTING: Three mounting options provide flexiblity, available in<br />
single ceiling, double ceiling, and wall mount.<br />
LAMP: One 75 watt halogen lamp features over 2000 hour lamp life.<br />
Intensity at 1 meter is 6000+ footcandles with a color temperature of<br />
4300 o K.<br />
WIRING: Internal 12 volt step down transformer, 120 volt input standard.<br />
Dual-pin ceramic lamp sockets. 5 amp rocker switch. Wall<br />
mount and floor stand units supplied with 8', 18/3, 3 power cord with<br />
hospital grade plug.<br />
OPTICS: Field size (maximum at 1 meter): 2-2.5 inches. Focal<br />
length: variable. Depth of field: infinite. Focusing: fixed.<br />
FINISH: Light grey.<br />
CERTIFICATION: UL and CSA approved.<br />
PRODUCT WARRANTY: Three years.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSS Medical Surgical Suite Luminaire<br />
ORDERING INFORMATION<br />
Example: MSS-0210132<br />
MSS<br />
zSeries<br />
z MSS<br />
zDescription<br />
❑0210122<br />
Single Ceiling<br />
❑0210132<br />
Double Ceiling<br />
❑0210142<br />
Wall Mount<br />
zAccessories<br />
❑0002006PK<br />
Set of 4, 75 Watt Halogen Bulbs<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSS.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
2/17T8<br />
2/20T12<br />
MWM2<br />
2 ft Medical<br />
Wall Luminaire<br />
DIMENSIONS<br />
3 7 / 16 "<br />
7 5 / 8 "<br />
3 3 / 8 "<br />
APPLICATIONS<br />
• Hospitals<br />
• Clinics<br />
• Birthing rooms<br />
• Laboratories<br />
• Psychiatric units<br />
• Patient bed light<br />
FEATURES<br />
• Direct/Indirect light<br />
• Seperate switching<br />
• Divided compartments<br />
2 3 / 32 "<br />
Cross Section<br />
18 3 / 4 "<br />
13 13 / 16 "<br />
7 /8 " Knockout 5 /16 " Dia. Mtg. Holes<br />
End Sections<br />
Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, cold rolled steel housing and end caps, with<br />
lapped and spot welded seams. Knockouts in each end allow for<br />
surface conduit and simplifies row installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
END CAP/LENS RETENTION: Die formed steel end caps held in<br />
place with two tamperproof fasteners.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
damp locations.<br />
required temperatures.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MWM2 2 ft Medical Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: MWM2-16-1/17T8-12PP-120-ESB-TX<br />
MWM2<br />
zSeries<br />
z MWM2<br />
24" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 18<br />
❑ 20<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ RSW<br />
Rocker Switch<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MWM2-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
4<br />
MWM4<br />
ft Medical<br />
Wall Luminaire<br />
2/32T8<br />
2/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
3 7 / 16 "<br />
7 5 / 8 "<br />
3 3 / 8 "<br />
• Hospitals<br />
• Clinics<br />
• Birthing rooms<br />
• Laboratories<br />
• Psychiatric units<br />
• Patient bed light<br />
• Direct/Indirect light<br />
• Seperate switching<br />
• Divided compartments<br />
• Polycarbonate lens<br />
2 3 / 32 "<br />
Cross Section<br />
48 3 / 4 "<br />
36"<br />
End Sections<br />
7 /8 " Knockout<br />
Rear View<br />
Mounting Dimple:<br />
2 Required<br />
SPECIFICATIONS<br />
HOUSING: Die formed, cold rolled steel housing and end caps, with<br />
lapped and spot welded seams. Knockouts in each end allow for<br />
surface conduit and simplifies row installation.<br />
LENS: One piece, UV stabilized, clear K-12 polycarbonate lens.<br />
END CAP/LENS RETENTION: Die formed steel end caps held in<br />
place with two fasteners.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving two ballast standard. Sound rating<br />
A, CBM/ETL certified. UL listed.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MWM4 4 ft Medical Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: MWM4-16-2/32T8-12PP-120-ESB<br />
MWM4<br />
zSeries<br />
z MWM4<br />
48" Nom. Length<br />
zGauge<br />
❑ 16<br />
❑ 18<br />
❑ 20<br />
zLamp Count<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ GCO<br />
Grounded Convenience Outlet<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ OPL<br />
Opal Lens<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ RSW<br />
Rocker Switch<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MWM4-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
STP<br />
Recessed<br />
Steplight<br />
Luminaire<br />
1/7TT<br />
1/9TT<br />
1/13TT<br />
1/13QD<br />
1/18QD<br />
1/26QD<br />
INC<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
Half Face<br />
Door Options<br />
Half Face<br />
with Rocker Switch<br />
Half Face<br />
with Duplex Receptacle<br />
• Hospitals<br />
• Psychiatric wards<br />
• Nursing homes<br />
• Stairwells<br />
• Corridors<br />
• Optional directional louver<br />
provides low level floor illumination<br />
• Available with duplex outlets<br />
• Fully gasketed between door<br />
and wall to prevent light leakage<br />
Full Face Full Louver Half Louver<br />
with Duplex Receptacle<br />
3 1 / 4 "<br />
3 1 / 4 "<br />
9 1 / 8 "<br />
5 1 / 2 "<br />
5 1 / 2 "<br />
Cross Section – Full Face<br />
Cross Section – Half Face<br />
Top Section<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge, galvanized steel housing. Other<br />
housing options available (see Options). Knockouts for thru wiring<br />
and adjustable mounting rails ease installation.<br />
DOOR: Die formed, one piece cold rolled steel door frame. Available<br />
in full or half face and with or without louvers, see options.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
LENS/LOUVER: To be specified; see options.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
STP Recessed Steplight Luminaire<br />
ORDERING INFORMATION<br />
Example: STP-13TT-HL-12PA/12CP-HPF-DSR-SDN<br />
STP<br />
zSeries<br />
z STP<br />
6"x10" Nom. Size<br />
zLamp Type<br />
❑ 7TT<br />
❑ 9TT<br />
❑ 13TT<br />
❑ 13QD<br />
❑ 18QD<br />
❑ 26QD<br />
❑ INC<br />
zLamps<br />
❑ Lamps<br />
Lamps to be<br />
included<br />
°K<br />
(Optional: Specify<br />
color)<br />
zDoor Options<br />
❑ FF<br />
Full Face<br />
❑ FL<br />
Full Louver<br />
❑ HF<br />
Half Face<br />
❑ HL<br />
Half Louver<br />
zLens Options<br />
❑ OPL<br />
.125" Opal Acrylic<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15CP<br />
.156" Clear Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ 15CG<br />
.156" Clear Tempered Glass<br />
❑ MLV<br />
Micro Louver Film,sandwiched<br />
between two layers of<br />
.125" Clear Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ DSR<br />
Duplex Receptacle †<br />
❑ DSR/HG<br />
Hospital Grade Receptacle †<br />
❑ GFI<br />
GFI Receptacle †<br />
❑ RSW<br />
Rocker Switch †<br />
❑ GLR<br />
Fast-blow Fuse<br />
✝ 120 Volt Fixtures Only<br />
zDoor Options<br />
❑ ADP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
† Half face door only<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
STP-02 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
UCL1<br />
1" Lensed Front<br />
Undercabinet Luminaire<br />
12"<br />
21"<br />
24"<br />
33"<br />
42"<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
1 1 / 8 "<br />
• Hospitals<br />
• Nursing stations<br />
• Administrative offices<br />
• Display cases<br />
• Schools<br />
• Kitchens<br />
• Dormitories<br />
• Work stations<br />
• Shallow 1" depth<br />
• Post painted<br />
• Pliable snap in lens<br />
• Hinged wireway<br />
• No exposed hardware<br />
• Outlet, rocker switch,<br />
Greenfield/Romex<br />
connector included<br />
Length Dim.A Dim.B<br />
12 1 / 4 " 8" 9 3 / 4 "<br />
21 1 / 4 " 17" 18 3 / 4 "<br />
24 1 / 2 " 20" 22"<br />
33 1 / 2 " 29" 31"<br />
42 1 / 2 " 38" 40"<br />
1 /2 "<br />
3 3 / 8 "<br />
Length<br />
Dim.B<br />
Dim.A<br />
Key Slots<br />
1 /2 " K.O.'s<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge cold rolled steel housing and end<br />
caps. Painted after fabrication to ensure the best possible finish and<br />
eliminate sharp, exposed edges. Available in stainless steel, see<br />
options.<br />
WIREWAY: Die formed, 20 gauge cold rolled steel wireway/reflector,<br />
hinged for easy installation and maintenance. Fastens inside the lens<br />
compartment for a clean look with no exposed hardware. Knockouts<br />
for convenience outlet and rocker switch standard.<br />
LENS: White translucent, wraparound lens made from UV stabilized,<br />
DR acrylic is both pliable and color stabilized. Lens snaps in without<br />
tools for easy relamping.<br />
ELECTRICAL: Completely pre-wired. AWM, TFN or THHN wire used<br />
throughout, rated for required temperatures. White, grounded<br />
convenience outlet, rocker switch and Greenfield/Romex connector<br />
are included for convenient field installation.<br />
BALLAST: Preheat, low power factor ballast with starter. CBM/ETL<br />
certified. UL listed. Class 'P' instant start or electronic ballasts<br />
optional.<br />
FINISH: Post painted in white polyester powder coat over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
UCL1 1" Lensed Front Undercabinet Luminaire<br />
ORDERING INFORMATION<br />
Example: UCL1-24-120-LPF-GLR-GCO<br />
UCL1<br />
zSeries<br />
z UCL1<br />
zLength/Lamps<br />
❑ 12<br />
12 1 /4" Long<br />
1/F8T5 Lamp<br />
❑ 21<br />
21 1 /4" Long<br />
1/F13T5 Lamp<br />
❑ 24<br />
24 1 /2" Long<br />
2/F8T5 Lamps<br />
❑ 33<br />
33 1 /2" Long<br />
1/F8T5 & 1/F13T5 Lamp<br />
❑ 42<br />
42 1 /2" Long<br />
2/F13T5 Lamps<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
zBallast<br />
❑LPF*<br />
Low <strong>Power</strong> Factor<br />
*Standard<br />
❑ISB<br />
Instant Start, power<br />
factor corrected<br />
❑ELB<br />
Electronic<br />
zOptions<br />
❑ 2CP<br />
6' Cord with 2 Conductor Plug<br />
❑ 3CP<br />
6' Cord with 3 Conductor Plug<br />
❑ GCO<br />
Outlet (Factory Installed)<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RSW<br />
Rocker Switch (Factory Installed)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ TLL<br />
Task Lite Lens<br />
(White Front, Clear Bottom)<br />
❑ MOD<br />
Specify Item<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
°K<br />
(Optional: Specify color)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
UCL1.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
DIMENSIONS<br />
Length Dim.A<br />
24 1 / 8 " 20"<br />
36 1 / 8 " 32"<br />
48 1 / 8 " 44"<br />
60 1 / 8 " 56"<br />
SPECIFICATIONS<br />
5 1 / 2 "<br />
3 /4 "<br />
3 3 / 4 "<br />
Fixture Type:<br />
Length<br />
Dim.A<br />
Key Slots<br />
HOUSING: Die formed, 20 gauge cold rolled steel housing and end<br />
caps. Painted after fabrication to ensure the best possible finish and<br />
eliminate sharp, exposed edges. Available in stainless steel, see<br />
options.<br />
WIREWAY: Die formed, 20 gauge cold rolled steel wireway/reflector,<br />
hinged for easy installation and maintenance. Fastens inside the lens<br />
compartment for a clean look with no exposed hardware. Knockouts<br />
for convenience outlet and rocker switch standard.<br />
LENS: White translucent, wraparound lens made from UV stabilized,<br />
DR acrylic is both pliable and color stabilized. Lens snaps in without<br />
tools for easy relamping.<br />
MEDICAL<br />
UCL2<br />
T8 Lensed Front<br />
Undercabinet Luminaire<br />
APPLICATIONS FEATURES<br />
• Hospitals<br />
• Shallow 1 3 /4" depth<br />
• Nursing stations<br />
• Post painted<br />
• Administrative offices • Pliable snap in lens<br />
• Display cases<br />
• Hinged wireway<br />
• Schools<br />
• No exposed hardware<br />
• Kitchens<br />
• Outlet, rocker switch,<br />
• Dormitories<br />
Greenfield/Romex<br />
• Work stations<br />
connector included<br />
1 3 / 4 "<br />
† 120 Volt Fixtures Only<br />
7 /8 " K.O.'s<br />
24"<br />
36"<br />
48"<br />
60"<br />
ELECTRICAL: Completely prewired. AWM, TFN or THHN wire used<br />
throughout, rated for required temperatures. White grounded convenience<br />
outlet † , rocker switch †<br />
and Greenfield/Romex connector are<br />
included for convenient field installation.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FINISH: Post painted in white polyester powder coat over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
UCL2 T8 Lensed Front Undercabinet Luminaire<br />
ORDERING INFORMATION<br />
Example: UCL2-48-120-ELB-GLR-GCO<br />
UCL2<br />
zSeries<br />
z UCL2<br />
zLength/Lamps<br />
❑ 24<br />
24 1 /8" Long<br />
1/17T8 Lamp<br />
❑ 36<br />
36 1 /8" Long<br />
1/25T8 Lamp<br />
❑ 48<br />
48 1 /8" Long<br />
1/32T8 Lamp<br />
❑ 60<br />
60 1 /8" Long<br />
1/40T8 Lamp<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB<br />
Energy Saving<br />
*Standard<br />
❑ELB<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
zOptions<br />
❑ 2CP †<br />
6' Cord with 2 Conductor Plug<br />
❑ 3CP †<br />
6' Cord with 3 Conductor Plug<br />
❑ GCO †<br />
Outlet (Factory Installed)<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RSW †<br />
Rocker Switch (Factory Installed)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ MOD<br />
Specify Item<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
°K<br />
(Optional: Specify color)<br />
† 120 Volt Fixtures Only<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
UCL2.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
UCS1<br />
1" Solid Front<br />
Undercabinet Luminaire<br />
12"<br />
21"<br />
24"<br />
33"<br />
42"<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
1 1 / 8 "<br />
• Hospitals<br />
• Nursing stations<br />
• Administrative offices<br />
• Display cases<br />
• Schools<br />
• Kitchens<br />
• Dormitories<br />
• Work stations<br />
• Shallow 1" depth<br />
• Post painted<br />
• Optional lenses<br />
• Hinged wireway<br />
• No exposed hardware<br />
• Outlet, rocker switch,<br />
Greenfield/Romex<br />
connector included<br />
Length Dim.A Dim.B<br />
12 1 / 4 " 8" 9 3 / 4 "<br />
21 1 / 4 " 17" 18 3 / 4 "<br />
24 1 / 2 " 20" 22"<br />
33 1 / 2 " 29" 31"<br />
42 1 / 2 " 38" 40"<br />
1 /2 "<br />
3 3 / 8 "<br />
Length<br />
Dim.B<br />
Dim.A<br />
Key Slots<br />
1 /2 " K.O.'s<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge cold rolled steel housing and end<br />
caps. Painted after fabrication to ensure the best possible finish and<br />
eliminate sharp, exposed edges. Available in stainless steel, see<br />
options.<br />
WIREWAY: Die formed, 20 gauge cold rolled steel wireway/reflector,<br />
hinged for easy installation and maintenance. Fastens inside the lens<br />
compartment for a clean look with no exposed hardware. Knockouts<br />
for convenience outlet and rocker switch standard.<br />
LENS: Clear, K12 prismatic acrylic lens for uniform distribution standard.<br />
Batwing distribution lens with 45º linear prisms; see options.<br />
ELECTRICAL: Completely prewired. AWM, TFN or THHN wire used<br />
throughout, rated for required temperatures. White grounded<br />
convenience outlet, rocker switch and Greenfield/Romex connector<br />
are included for convenient field installation.<br />
BALLAST: Preheat, low power factor ballast with starter. CBM/ETL<br />
certified. UL listed. Class 'P' instant start or electronic ballasts<br />
optional.<br />
FINISH: Post painted in white polyester powder coat over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
UCS1 1" Solid Front Undercabinet Luminaire<br />
ORDERING INFORMATION<br />
Example: UCS1-24-120-LPF-GLR-GCO<br />
UCS1<br />
zSeries<br />
z UCS1<br />
zLength/Lamps<br />
❑ 12<br />
12 1 /4" Long<br />
1/F8T5 Lamp<br />
❑ 21<br />
21 1 /4" Long<br />
1/F13T5 Lamp<br />
❑ 24<br />
24 1 /2" Long<br />
2/F8T5 Lamps<br />
❑ 33<br />
33 1 /2" Long<br />
1/F8T5 & 1/F13T5 Lamp<br />
❑ 42<br />
42 1 /2" Long<br />
2/F13T5 Lamps<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
zBallast<br />
❑LPF*<br />
Low <strong>Power</strong> Factor<br />
*Standard<br />
❑ISB<br />
Instant Start, power<br />
factor corrected<br />
❑ELB<br />
Electronic<br />
zOptions<br />
❑ 2CP<br />
6' Cord with 2 Conductor Plug<br />
❑ 3CP<br />
6' Cord with 3 Conductor Plug<br />
❑ GCO<br />
Outlet (Factory Installed)<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ K25B<br />
Acrylic Batwing Lens<br />
❑ RSW<br />
Rocker Switch (Factory Installed)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ MOD<br />
Specify Item<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
°K<br />
(Optional: Specify color)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
UCS1.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
DIMENSIONS<br />
SPECIFICATIONS<br />
5 1 / 2 "<br />
Length Dim.A<br />
24 1 / 8 " 20"<br />
3 /4 "<br />
36 1 / 8 " 32"<br />
48 1 / 8 " 44"<br />
60 1 / 8 " 56" 3 3 / 4 "<br />
Fixture Type:<br />
Length<br />
Dim.A<br />
Key Slots<br />
HOUSING: Die formed, 20 gauge cold rolled steel housing and end<br />
caps. Painted after fabrication to ensure the best possible finish and<br />
eliminate sharp, exposed edges. Available in stainless steel, see<br />
options.<br />
WIREWAY: Die formed, 20 gauge cold rolled steel wireway/reflector,<br />
hinged for easy installation and maintenance. Fastens inside the lens<br />
compartment for a clean look with no exposed hardware. Knockouts<br />
for convenience outlet and rocker switch standard.<br />
LENS: Clear, K12 prismatic acrylic lens for uniform distribution standard.<br />
Batwing distribution lens with 45º linear prisms; optional.<br />
MEDICAL<br />
UCS2<br />
T8 Solid Front<br />
Undercabinet Luminaire<br />
APPLICATIONS FEATURES<br />
• Hospitals<br />
• Shallow 1 3 /4" depth<br />
• Nursing stations<br />
• Post painted<br />
• Administrative offices • Optional lenses<br />
• Display cases<br />
• Hinged wireway<br />
• Schools<br />
• No exposed hardware<br />
• Kitchens<br />
• Outlet, rocker switch,<br />
• Dormitories<br />
Greenfield/Romex<br />
1 3 / 4 "<br />
• Work stations<br />
connector included<br />
7 /8 " K.O.'s<br />
24"<br />
36"<br />
48"<br />
60"<br />
ELECTRICAL: Completely prewired. AWM, TFN or THHN wire used<br />
throughout, rated for required temperatures. White grounded convenience<br />
outlet † , rocker switch †<br />
and Greenfield/Romex connector are<br />
included for convenient field installation.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FINISH: Post painted in white polyester powder coat over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved. Suitable for dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
UCS2 T8 Solid Front Undercabinet Luminaire<br />
ORDERING INFORMATION<br />
Example: UCS2-48-120-ELB-GLR-GCO<br />
UCS2<br />
zSeries<br />
z UCS2<br />
zLength/Lamps<br />
❑ 24<br />
24 1 /8" Long<br />
1/17T8 Lamp<br />
❑ 36<br />
36 1 /8" Long<br />
1/25T8 Lamp<br />
❑ 48<br />
48 1 /8" Long<br />
1/32T8 Lamp<br />
❑ 60<br />
60 1 /8" Long<br />
1/40T8 Lamp<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB<br />
Energy Saving<br />
❑ELB<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
zOptions<br />
❑ 2CP †<br />
6' Cord with 2 Conductor Plug<br />
❑ 3CP †<br />
6' Cord with 3 Conductor Plug<br />
❑ GCO †<br />
Outlet (Factory Installed)<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ K25B<br />
Arcylic Batwing Lens<br />
❑ RSW †<br />
Rocker Switch (Factory Installed)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ MOD<br />
Specify Item<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
°K<br />
(Optional: Specify color)<br />
† 120 Volt Fixtures Only<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
UCS2.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
UCT1<br />
1" Lensed Front<br />
Undercabinet Task/Ambient<br />
Luminaire<br />
12"<br />
21"<br />
24"<br />
33"<br />
42"<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
1 1 / 8 "<br />
• Hospitals<br />
• Nursing stations<br />
• Administrative offices<br />
• Display cases<br />
• Schools<br />
• Kitchens<br />
• Dormitories<br />
• Work stations<br />
• Shallow 1" depth<br />
• Post painted<br />
• Pliable snap in lens<br />
• Hinged wireway<br />
• No exposed hardware<br />
• Outlet, rocker switches,<br />
Greenfield/Romex<br />
connector included<br />
• Seperate switching<br />
• Divided compartments<br />
Length Dim.A Dim.B<br />
12 1 / 4 " 8" 9 3 / 4 "<br />
21 1 / 4 " 17" 18 3 / 4 "<br />
24 1 / 2 " 20" 22"<br />
33 1 / 2 " 29" 31"<br />
42 1 / 2 " 38" 40"<br />
1 /2 "<br />
3 3 / 8 "<br />
Length<br />
Dim.B<br />
Dim.A<br />
Key Slots<br />
1 /2 " K.O.'s<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge cold rolled steel housing and end<br />
caps. Painted after fabrication to ensure the best possible finish and<br />
eliminate sharp, exposed edges. Available in stainless steel, see<br />
options.<br />
REFLECTOR: Die formed, 20 gauge reflector separates front and<br />
rear lamps to provide task and ambient lighting.<br />
WIREWAY: Die formed, 20 gauge cold rolled steel wireway/reflector,<br />
hinged for easy installation and maintenance. Fastens inside the lens<br />
compartment for a clean look with no exposed hardware. Knockouts<br />
for convenience outlet and rocker switches standard.<br />
LENS: White translucent, wraparound lens made from UV stabilized,<br />
DR acrylic is both pliable and color stabilized. Lens snaps in without<br />
tools for easy relamping.<br />
ELECTRICAL: Completely prewired. AWM, TFN or THHN wire used<br />
throughout, rated for required temperatures. White, grounded convenience<br />
outlet, rocker switches and Greenfield/Romex connector are<br />
included for convenient field installation.<br />
BALLASTS: Preheat, low power factor ballasts with starters.<br />
CBM/ETL certified. UL listed. Class 'P' instant start or electronic ballasts<br />
optional.<br />
FINISH: Post painted in white polyester powder coat over multi-stage<br />
phosphatizing pretreatment to ensure superior paint adhesion and<br />
rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
dry locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
UCT1 1" Lensed Front Undercabinet Task/Ambient Luminaire<br />
ORDERING INFORMATION<br />
Example: UCT1-24-120-LPF-GLR-GCO<br />
UCT1<br />
zSeries<br />
z UCT1<br />
zLength/Lamps<br />
❑ 12<br />
12 1 /4" Long<br />
2/F8T5 Lamp<br />
❑ 21<br />
21 1 /4" Long<br />
2/F13T5 Lamp<br />
❑ 24<br />
24 1 /2" Long<br />
4/F8T5 Lamps<br />
❑ 33<br />
33 1 /2" Long<br />
2/F8T5 & 2/F13T5 Lamp<br />
❑ 42<br />
42 1 /2" Long<br />
4/F13T5 Lamps<br />
❑ LMP (Specify)<br />
zVoltage<br />
❑120<br />
zBallast<br />
❑LPF*<br />
Low <strong>Power</strong> Factor<br />
*Standard<br />
❑ISB<br />
Instant Start, power<br />
factor corrected<br />
❑ELB<br />
Electronic<br />
zOptions<br />
❑ 2CP<br />
6' Cord with 2 Conductor Plug<br />
❑ 3CP<br />
6' Cord with 3 Conductor Plug<br />
❑ GCO<br />
Outlet (Factory Installed)<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RSW2<br />
Two Rocker Switches (Factory Installed)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ TLL<br />
Task Lite Lens<br />
(White Front, Clear Bottom)<br />
❑ MOD<br />
Specify Item<br />
zLamps<br />
❑Lamps<br />
Lamps to be included<br />
(Optional: Specify color)<br />
°K<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
UCT1.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
MEDICAL<br />
X-RAY<br />
Maxant Techline<br />
Viewer Panels<br />
DIMENSIONS<br />
Front View<br />
APPLICATIONS<br />
• Hospitals<br />
• Nursing homes<br />
• Surgical facilities<br />
• Clinics<br />
• Out-patient facilities<br />
FEATURES<br />
• Unibody construction<br />
• Available in surface mount or recessed<br />
• Convenient serviceablilty<br />
• Cluster switching<br />
• Thin 3 3 / 8 " depth<br />
Front View<br />
TS-222 Shown<br />
SPECIFICATIONS<br />
Top View<br />
Surface Mount<br />
HOUSING: Die-formed, 18 gauge cold rolled steel housing with welded<br />
seams. 14 gauge cold rolled steel outer flange on recessed units.<br />
FILM RETAINER: Roller gravity grip self adjusts to handle all film<br />
thicknesses.<br />
DIFFUSING PANEL: 1/8" shatter resistant Plexiglass viewing panel.<br />
Easily removable without the use of tools for servicing.<br />
SWITCHING: Switch is mounted in centrally located cluster to provide<br />
convenient distinguished control to all panels. On/off rocker<br />
switch is standard.<br />
SWITCHING OPTIONS: FILM ACTIVATED SWITCHING: Three<br />
position on/off/auto rocker switch per panel. DUAL INTENSITY<br />
SWITCHING: Two position hi/low rocker switch per tier (includes film<br />
activated). MASTER SWITCHING: Two position on/off rocker switch<br />
controlling power to entire fixture.<br />
MOUNTING DIAGRAM<br />
Top View<br />
Recess Mount<br />
LAMPS: F15T8/D fluorescent lamps supplied.<br />
WIRING: Each viewer has an individual wireway panel for convienient<br />
acess to all internal electrical components.<br />
BALLAST: Class P, instant start, low voltage leakage standard.<br />
CBM/ETL certified. UL and CSA listed.<br />
ELECTRICAL: 7' cord and NEMA 5-15p, 2-pole, 3 wire ground<br />
(standard with surface mounted viewers). Recess mount viewers<br />
are standard with 3-wire whip with conduit connector.<br />
FINISH: Baked hospital white enamel outside finish. Interior finish is<br />
highly reflective baked enamel.<br />
CERTIFICATION: UL and CSA listed.<br />
Holcor is an authorized distributor of Maxant Techline viewer panels.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
X-RAY Maxant Techline Viewer Panels<br />
ORDERING INFORMATION<br />
Example: TS-406<br />
T<br />
- -<br />
zSeries<br />
zT<br />
zMounting<br />
❑S<br />
Surface<br />
❑F<br />
Recessed Flange<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zPanels Across<br />
Upper Tier<br />
❑ 0<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 5<br />
❑ 6<br />
zPanels Across<br />
Lower Tier<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
❑ 5<br />
❑ 6<br />
zSwitch Options<br />
❑ FAS<br />
Film activated switching<br />
❑ DIS<br />
Dual intensity switcing<br />
❑ MS<br />
Master switching<br />
VIEWING AREA CHART<br />
Fixture Description Viewing Area<br />
T-X-X-<br />
01<br />
02<br />
03<br />
04<br />
05<br />
06<br />
11<br />
22<br />
33<br />
44<br />
55<br />
66<br />
single panel<br />
2 panel side by side<br />
3 panel side by side<br />
4 panel side by side<br />
5 panel side by side<br />
6 panel side by side<br />
1 over 1<br />
2 over 2<br />
3 over 3<br />
4 over 4<br />
5 over 5<br />
6 over 6<br />
14" x 17"<br />
28" x 17"<br />
42" x 17"<br />
56" x 17"<br />
70" x 17"<br />
84" x 17"<br />
2 x 14" x 17"<br />
2 x 28" x 17"<br />
2 x 42" x 17"<br />
2 x 56" x 17"<br />
2 x 70" x 17"<br />
2 x 84" x 17"<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Ordering Notes:<br />
Approval:<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
X-RAY.01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
PSYCHIATRIC<br />
MSRF<br />
Psychiatric Security<br />
Recessed Fluorescent<br />
Luminaire<br />
1/7TT<br />
2/7TT<br />
1/9TT<br />
2/9TT<br />
2/13TT<br />
1/13QD<br />
2/13QD<br />
1/18QD<br />
2/18QD<br />
1/26QD<br />
2/26QD<br />
1/18PLT<br />
1/26PLT<br />
1/32PLT<br />
1/42PLT<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
11 "<br />
• Psychiatric Units<br />
• Hospitals<br />
• Laboratories<br />
• Clinics<br />
• Emergency Rooms<br />
• Symmetrical distribution<br />
• Semi-specular Alzak reflector<br />
• One piece door<br />
9 "<br />
20"<br />
Cross Section<br />
17 1 / 4 "<br />
Exposed View<br />
Bottom View<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, rolled and seam welded, 18 gauge, cold<br />
rolled steel housing. Other housing options available (see Options).<br />
DOOR: One piece, 16 gauge, cold rolled steel door frame with die<br />
formed edges and tightly closed corners for increasing rigidity.<br />
Other door options available (see Options).<br />
REFLECTOR: Semi-specular Alzak reflector is designed for symmetrical<br />
distribution.<br />
LENS: To be specified. See lens options.<br />
LENS RETENTION: Lens secured to door frame with "L" angles.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures. Connections are made in a junction box<br />
attached to mounting pan and allows for thru wiring.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
MOUNTING: One piece rigid mounting pan. Holes provided for supporting<br />
with cable or thinwall conduit.<br />
FASTENERS: Stainless steel machine screws secure through captive<br />
cage nuts. For tamper proof fasteners see options.<br />
GASKETING: Polyurethane gasketing seals against outside contaminants.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatzing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSRF Psychiatric Security Recessed Fluorscent Luminaire<br />
ORDERING INFORMATION<br />
Example: MSRF-2/13TT-15PP-277-NPF-TX<br />
MSRF<br />
zSeries<br />
z MSRF<br />
17 1 /4" x 20"<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
Fluorescent<br />
❑ 7TT<br />
❑ 9TT<br />
❑ 13TT<br />
❑ 13QD<br />
❑ 18QD<br />
❑ 26QD<br />
❑ 28QD<br />
❑ 26QD<br />
❑ 18PLT (1 max.)<br />
❑ 26PLT (1 max.)<br />
❑ 32PLT (1 max.)<br />
❑ 42PLT (1 max.)<br />
❑ LMP (Specify)<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLens Options<br />
Fixture side<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
Environment Side<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF q<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB † *<br />
Electronic<br />
q Standard<br />
†<br />
Requires 4 pin lamps.<br />
Consult factory for availability.<br />
zOptions<br />
❑ EBP *<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
°K<br />
(Optional: Specify color)<br />
* Consult Factory For Availability.<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSRF-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
PSYCHIATRIC<br />
MSRH<br />
Psychiatric Security<br />
H. I. D. Recessed<br />
Luminaire<br />
35S<br />
50S<br />
70S<br />
100S<br />
150S<br />
50M<br />
70M<br />
100M<br />
150M<br />
175M<br />
150I<br />
9 "<br />
DIMENSIONS<br />
11 "<br />
20 "<br />
APPLICATIONS<br />
• Psychiatric units<br />
• Hospitals<br />
• Laboratories<br />
• Clinics<br />
• Emergency rooms<br />
FEATURES<br />
• Symmetrical distribution<br />
• Semi-specular Alzak reflector<br />
• One piece door<br />
17 1 / 4 "<br />
Exposed View<br />
Bottom View<br />
SPECIFICATIONS<br />
HOUSING: Heavy duty, rolled and seam welded, 18 gauge, cold<br />
rolled steel housing. Other housing options available (see Options).<br />
DOOR: One piece, 16 gauge, cold rolled steel door frame with die<br />
formed edges and tightly closed corners for increasing rigidity. For<br />
other door materials see options.<br />
REFLECTOR: Semi-specular Alzak reflector is designed for symmetrical<br />
distribution.<br />
LENS: To be specified. See lens options.<br />
LENS RETENTION: Lens secured to door frame with "L" angles.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures. Connections are made in a junction box<br />
attached to mounting pan and allows for thru wiring.<br />
BALLAST: HPF potted and encased, thermally protected. Core<br />
and coil ballast standard. CBM/ETL certicified. UL listed.<br />
MOUNTING: One piece rigid mounting pan. Holes provided for<br />
supporting with cable or thinwall conduit.<br />
FASTENERS: Stainless steel machine screws secure through captive<br />
cage nuts. For tamper proof fasteners see options.<br />
GASKETING: Polyurethane gasketing seals against outside contaminants.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for wet locations.<br />
FINISH: White polyester powder coat finish over multi-stage phasphatizing<br />
pre-treatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%<br />
CERTIFICATION: UL listed and labeled, A.F.L.C.I.O. CSA approved.<br />
Suitable for wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
MSRH Psychiatric Security Recessed H. I. D. Luminaire<br />
ORDERING INFORMATION<br />
MSRH<br />
Example: MSRH-70M-15PG-277-HPF-TX<br />
zSeries<br />
z MSRH<br />
17 1 /4" x 20"<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Type<br />
High Pressure Sodium<br />
❑ 35S (S76/M)<br />
❑ 50S (S68/M)<br />
❑ 70S (S62/M)<br />
❑ 100S (S54/M)<br />
❑ 150S (S55/M)<br />
Metal Halide<br />
❑ 50M (M110)<br />
❑ 70M (M98)<br />
❑ 100M (M90)<br />
❑ 150M (M102)<br />
❑ 175M (M57)<br />
<strong>Inc</strong>andescent<br />
❑ 150I<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
Environment Side<br />
❑ 25CP †<br />
.250 Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
zOptions<br />
❑ GLR<br />
Fast-Blow Fuse<br />
❑ QRS<br />
Quartz Restrike System<br />
❑ QS<br />
Quartz Socket Only<br />
zDoor Options<br />
❑ ALP<br />
Aluminum Door (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
†<br />
Less than 100W<br />
Corporate Headquarters<br />
zLamps<br />
❑Lamp<br />
Lamp to be included<br />
°K<br />
(Optional: Specify color)<br />
❑ MOD<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
MSRH-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
PSYCHIATRIC<br />
PCF9<br />
4 ft Psychiatric Security<br />
Corner Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
9"<br />
8 13 / 16 "<br />
APPLICATIONS<br />
• Psychiatric units<br />
• Hospitals<br />
• Laboratories<br />
• Clinics<br />
• Emergency uooms<br />
FEATURES<br />
• Contraband drop slot<br />
• Embossed mounting holes<br />
• Hidden, continuous piano hinge<br />
• Unitized power module<br />
• Recessed fasteners<br />
• Rigid backplate design<br />
53 1 / 4 "<br />
14" 14" 14"<br />
1 3 / 4 "<br />
6 1 / 2 "<br />
Front View<br />
9 /16 " Dia. Mtg. Holes<br />
2 1 / 4 " Dia. Access Hole<br />
SPECIFICATIONS<br />
HOUSING: Clamshell design die formed from cold rolled steel with<br />
continuously welded and ground ends. Housing has four recessed<br />
fasteners per side to allow secure and even contact with the mounting<br />
surface. Other housing options available (see Options).<br />
BACKPLATE: Die formed cold rolled steel backplate with eight<br />
embossed mounting holes to ensure positive metal to ceiling/wall<br />
contact. All sides have a 'V' shaped compound bend to form an integral<br />
irretrievable blade trap and increase rigidity. Other materials<br />
available (see Options).<br />
HINGE: Continuous 16 gauge piano hinge with welded pin end.<br />
Hinge is completely hidden inside fixture when closed and is<br />
equipped with a slide lock system to allow simple detachment of<br />
housing from backplate during installation and maintenance.<br />
LENS RETENTION: Lens secured with 1/4-20 press thru studs, 8"<br />
max. on center, and continuous, one piece, vertically adjustable steel<br />
hold down.<br />
LENS: Lens to be specified. See lens options.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel fasteners, angled to pull housing<br />
up to the mounting surface, secure through captive cagenuts that are<br />
accessible without removing backplate from the ceiling/wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
PCF9 4 ft Psychiatric Security Corner Luminaire<br />
ORDERING INFORMATION<br />
Example: PCF9-14-2/32T8-12PA/37CP-120-ESB2-TX<br />
PCF9<br />
zSeries<br />
z PCF9<br />
48" Nom. Length<br />
zGauge<br />
❑ 12<br />
❑ 14<br />
❑ 16<br />
❑ 18<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ SPK<br />
Speaker Compartment<br />
(Extends Housing)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SBN<br />
Stainless Steel Backplate (Polished)<br />
❑ SBP<br />
Stainless Steel Backplate (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ TCS<br />
Touch Control On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
CUSTOM COLORS AVAILABLE - CONSULT FACTORY<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
PCF94-01psyc. © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
PSYCHIATRIC<br />
1x1<br />
PRF11<br />
Psychiatric Security<br />
Recessed Flange<br />
Luminaire<br />
1/13TT<br />
2/13TT<br />
3/13TT<br />
1/26QD<br />
2/26QD<br />
1/38DD<br />
DIMENSIONS<br />
5"<br />
APPLICATIONS<br />
• Psychiatric units<br />
• Hospitals<br />
• Laboratories<br />
• Clinics<br />
• Emergency rooms<br />
FEATURES<br />
• Batwing mounting hangers<br />
• Hidden continuous piano hinge<br />
• Unitized power module<br />
• Recessed fasteners<br />
• Rigid housing design<br />
• One piece hold down<br />
12"<br />
SPECIFICATIONS<br />
HOUSING: Die formed, cold rolled steel housing and end caps.<br />
Housing has stepped sides for increased rigidity and four 7/8" diameter<br />
knockouts for wiring. Other housing options available (see<br />
Options).<br />
DOOR: Die formed, cold rolled steel door with four embossed fastener<br />
holes to ensure positive metal to ceiling contact. Other door<br />
options available (see Options).<br />
HINGE: Continuous 16 gauge piano hinge with welded pin end.<br />
Hinge is completely hidden inside fixture when closed and is<br />
equipped with a slide lock system to allow simple detachment of door<br />
from housing during installation and maintenance.<br />
LENS RETENTION: Lens secured with 1/4-20 press thru studs, 8"<br />
max. on center, and continuous, one piece, vertically adjustable steel<br />
hold down.<br />
LENS: Lens to be specified. See lens options<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without<br />
tools to facilitate service. AWM, TFN or THHN wire used throughout,<br />
rated for required temperatures.<br />
BALLAST: NPF core and coil ballast standard. CBM/ETL certified.<br />
UL listed.<br />
FASTENERS: Four stainless steel fasteners, positioned to pull door<br />
up to ceiling, secure through captive cagenuts.<br />
MOUNTING: Four BATWING hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
PRF11 1x1 Psychiatric Security Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
PRF11<br />
Example: PRF11-14-2/26QD-12PA/37CP-120-HPF-TX<br />
zSeries<br />
z PRF11<br />
1'x1' Nom. Size<br />
zGauge<br />
❑ 14<br />
❑ 16<br />
❑ 18<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
❑ PF11<br />
Plaster Frame Ring<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 13TT<br />
❑ 26QD (2 max.)<br />
❑ 38DD (1 max.)<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑NPF*<br />
Normal <strong>Power</strong> Factor<br />
❑HPF<br />
High <strong>Power</strong> Factor<br />
❑ELB<br />
Electronic<br />
*Standard<br />
zOptions<br />
❑ CRM<br />
Continous Row Mounting<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ SPK<br />
Speaker Compartment<br />
(Extends Housing)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
❑ TCS<br />
Touch Control On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ LNS<br />
Specify Item<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
CUSTOM COLORS AVAILABLE - CONSULT FACTORY<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
PRF11-01psyc. © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
PSYCHIATRIC<br />
2x4<br />
PRF24<br />
Psychiatric Security<br />
Recessed Flange<br />
Luminaire<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
5"<br />
DIMENSIONS<br />
APPLICATIONS<br />
• Psychiatric units<br />
• Hospitals<br />
• Laboratories<br />
• Clinics<br />
• Emergency rooms<br />
FEATURES<br />
• Batwing mounting hangers<br />
• Hidden continuous piano hinge<br />
• Unitized power module<br />
• Recessed fasteners<br />
• Rigid housing design<br />
• One piece hold down<br />
24"<br />
SPECIFICATIONS<br />
HOUSING: Die formed, cold rolled steel housing and end caps.<br />
Housing has stepped sides for increased rigidity and four 7/8" diameter<br />
knockouts for wiring. Other housing options available (see<br />
Options).<br />
DOOR: Die formed, cold rolled steel door with eight embossed fastener<br />
holes to ensure positive metal to ceiling contact. Other door<br />
options available (see Options).<br />
HINGE: Continuous, 16 gauge piano hinge with welded pin end.<br />
Hinge is completely hidden inside fixture when closed and is<br />
equipped with a slide lock system to allow simple detachment of door<br />
from housing during installation and maintenance.<br />
LENS RETENTION: Lens secured with 1/4-20 press through studs,<br />
8" max. on center, and continuous, one piece, vertically adjustable<br />
steel hold down.<br />
LENS: Lens to be specified. See lens options.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel fasteners, positioned to pull door<br />
up to ceiling, secure through captive cagenuts.<br />
MOUNTING: Four BATWING hangers allow simple and secure<br />
mounting.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
PRF24 2x4 Psychiatric Security Recessed Flange Luminaire<br />
ORDERING INFORMATION<br />
PRF24<br />
Example: PRF24-14-4/32T8-12PA/37CP-120-ESB2-TX<br />
zSeries<br />
z PRF24<br />
2'x4' Nom. Size<br />
zGauge<br />
❑ 14<br />
❑ 16<br />
❑ 18<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 2<br />
❑ 3<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ CRM<br />
Continous Row Mounting<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ PF24<br />
Plaster Frame Ring<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ SPK<br />
Speaker Compartment<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SDN<br />
Stainless Steel Door (Polished)<br />
❑ SDP<br />
Stainless Steel Door (Painted)<br />
❑ TCS<br />
Touch Control On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
(Extends Housing)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
CUSTOM COLORS AVAILABLE - CONSULT FACTORY<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
PRF24-01psyc. © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
PSYCHIATRIC<br />
PSF13<br />
4 ft. Psychiatric Security<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
5"<br />
12 7 / 8 "<br />
• Psychiatric units<br />
• Hospitals<br />
• Laboratories<br />
• Clinics<br />
• Emergency rooms<br />
• Contraband drop slot<br />
• Sloped sides and ends<br />
• Embossed mounting holes<br />
• Hidden continuous piano hinge<br />
• Unitized power module<br />
• Recessed fasteners<br />
• Rigid backplate design<br />
14" 14" 14"<br />
53 1 / 4 "<br />
8"<br />
Side View<br />
9 /16 " Dia. Mtg. Holes<br />
2 1 / 4 " Dia. Access Hole<br />
SPECIFICATIONS<br />
HOUSING: Clamshell design with sloped sides and ends. Die-formed<br />
from cold rolled steel with continuously welded and ground seams.<br />
Housing has four recessed fasteners per side to allow secure and<br />
even contact with the ceiling. Other housing options available (see<br />
Options).<br />
BACKPLATE: Die-formed cold rolled steel backplate with eight<br />
embossed mounting holes to ensure positive metal to ceiling contact.<br />
All sides have a 'V' shaped compound bend to form an integral irretrievable<br />
blade trap and increase rigidity. Other materials available<br />
(see Options).<br />
HINGE: Continuous 16 gauge piano hinge with welded pin end.<br />
Hinge is completely hidden inside fixture when closed and is<br />
equipped with a slide lock system to allow simple detachment of<br />
housing from backplate during installation and maintenance.<br />
LENS RETENTION: Lens secured with 1/4-20 press thru studs, 8"<br />
max. on center, and continuous, one piece, vertically adjustable<br />
steel hold down.<br />
LENS: Lens to be specified.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel fasteners, angled to pull housing<br />
up to ceiling, secure through captive cagenuts that are accessible<br />
without removing backplate from ceiling.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
PSF13 4 ft. Psychiatric Security Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: PSF13-14-2/32T8-12PA/37CP-120-ESB2-TX<br />
PSF13<br />
zSeries<br />
z PSF13<br />
48" Nom. Length<br />
zGauge<br />
❑ 12<br />
❑ 14<br />
❑ 16<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 3<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ SPK<br />
Speaker Compartment<br />
(Extends Housing)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SBN<br />
Stainless Steel Backplate (Polished)<br />
❑ SBP<br />
Stainless Steel Backplate (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ TCS<br />
Touch Control On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
PSF134..01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
PSYCHIATRIC<br />
PWF<br />
4 ft Maximum Security<br />
Wall Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
10 7 / 8 "<br />
6 13 / 16 "<br />
• Psychiatric units<br />
• Hospitals<br />
• Laboratories<br />
• Clinics<br />
• Emergency rooms<br />
• Contraband drop slot<br />
• Sloped sides and ends<br />
• Embossed mounting holes<br />
• Hidden continuous piano hinge<br />
• Unitized power module<br />
• Recessed fasteners<br />
• Rigid backplate design<br />
14 "<br />
14 " 14 "<br />
53 1 / 4 "<br />
6 "<br />
Top View<br />
9 /16 " Dia. Mtg. Holes 2 1 / 4 " Dia. Access Hole<br />
SPECIFICATIONS<br />
HOUSING: Clamshell design with sloped sides and ends. Die formed<br />
from cold rolled steel with continuously welded and ground seams.<br />
Housing has four recessed fasteners per side to allow secure and<br />
even contact with the ceiling. Other housing options available (see<br />
Options).<br />
BACKPLATE: Die formed, cold rolled steel backplate with eight<br />
embossed mounting holes to ensure positive metal to wall contact.<br />
All sides have a 'V' shaped compound bend to form an integral irretrievable<br />
blade trap and increase rigidity. Other materials available<br />
(see Options).<br />
HINGE: Continuous 16 gauge piano hinge with welded pin end.<br />
Hinge is completely hidden inside fixture when closed and is<br />
equipped with a slide lock system to allow simple detachment of<br />
housing from backplate during installation and maintenance.<br />
LENS RETENTION: Lens secured with 1/4-20 press thru studs, 8"<br />
max. on center, and continuous, one piece, vertically adjustable steel<br />
hold down.<br />
LENS: Lens to be specified. See lens options.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel fasteners, angled to pull housing<br />
up to the wall, secure through captive cagenuts that are accessible<br />
without removing backplate from the wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled I.B.E.W., A.F.L.-C.I.O. CSA<br />
approved.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
PWF 4 ft Maximum Security Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: PWF-14-2/2/32T8-12PA/37CP-120-ESB2-TX<br />
PWF<br />
zSeries<br />
z PWF<br />
48" Nom. Length<br />
zGauge<br />
❑ 12<br />
❑ 14<br />
❑ 16<br />
❑ 18<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
# Lamps Up<br />
❑ 1<br />
❑ 2<br />
# Lamps Down<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ SPK<br />
Speaker Compartment<br />
(Extends Housing)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SBN<br />
Stainless Steel Backplate (Polished)<br />
❑ SBP<br />
Stainless Steel Backplate (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ TCS<br />
Touch Control On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Approval:<br />
Date:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
PWF4-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
PSYCHIATRIC<br />
PWR<br />
4 ft Psychiatric Security<br />
Wall Luminaire<br />
1/32T8<br />
2/32T8<br />
3/32T8<br />
4/32T8<br />
1/40T12<br />
2/40T12<br />
3/40T12<br />
4/40T12<br />
DIMENSIONS<br />
10 7 / 8 "<br />
8 7 / 8 "<br />
APPLICATIONS<br />
• Psychiatric units<br />
• Hospitals<br />
• Laboratories<br />
• Clinics<br />
• Emergency rooms<br />
FEATURES<br />
• Contraband drop slot<br />
• Embossed mounting holes<br />
• Hidden continuous piano hinge<br />
• Unitized power module<br />
• Recessed fasteners<br />
• Rigid backplate design<br />
53 1 / 4 "<br />
14" 14" 14"<br />
6"<br />
Top View<br />
9 /16 " Dia. Mtg. Holes<br />
2 1 / 4 " Dia. Access Hole<br />
SPECIFICATIONS<br />
HOUSING: Clamshell design, die formed from cold rolled steel with<br />
continuously welded and ground ends. Housing has four recessed<br />
fasteners per side to allow secure and even contact with the wall.<br />
Other housing options available (see Options).<br />
BACKPLATE: Die formed, cold rolled steel backplate with eight<br />
embossed mounting holes to ensure positive metal to wall contact.<br />
All sides have a 'V' shaped compound bend to form an integral irretrievable<br />
blade trap and increase rigidity. Other materials available<br />
(see Options).<br />
HINGE: Continuous 16 gauge piano hinge with welded pin end.<br />
Hinge is completely hidden inside fixture when closed and is<br />
equipped with a slide lock system to allow simple detachment of<br />
housing from backplate during installation and maintenance.<br />
LENS RETENTION: Lens secured with 1/4-20 press thru studs, 8"<br />
max. on center, and continuous, one piece, vertically adjustable steel<br />
hold down.<br />
LENS: Lens to be specified. See lens options.<br />
POWER MODULE: Electrical components are mounted to a unitized<br />
power module with quick disconnect that is removable without tools<br />
to facilitate service. AWM, TFN or THHN wire used throughout, rated<br />
for required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
FASTENERS: Eight stainless steel fasteners, angled to pull housing<br />
up to the wall, secure through captive cagenuts that are accessible<br />
without removing backplate from the wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable<br />
for damp locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
PWR 4 ft Psychiatric Security Wall Luminaire<br />
ORDERING INFORMATION<br />
Example: PWR-14-2/2/32T8-12PA/37CP-120-ESB2-TX<br />
PWR<br />
zSeries<br />
z PWR<br />
48" Nom. Length<br />
zGauge<br />
❑ 12<br />
❑ 14<br />
❑ 16<br />
❑ 18<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zLamp Count<br />
# Lamps Up<br />
❑ 1<br />
❑ 2<br />
# Lamps Down<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
Fixture side<br />
❑ 12PA<br />
.125" Prismatic Acrylic<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 15PG<br />
.156" Prismatic Tempered Glass<br />
❑ UVO<br />
.005" UV Absorbing Overlay<br />
Environment Side<br />
❑ 12CP<br />
.125" Clear Polycarbonate<br />
❑ 18CP<br />
.187" Clear Polycarbonate<br />
❑ 25CP<br />
.250" Clear Polycarbonate<br />
❑ 37CP<br />
.375" Clear Polycarbonate<br />
❑ 18CG<br />
.187" Clear Tempered Glass<br />
❑ 25CG<br />
.250" Clear Tempered Glass<br />
❑ 37CG<br />
.375" Clear Tempered Glass<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ NL7<br />
Night Light (7/9W Fluorescent)<br />
❑ RIF<br />
Radio Interference Filter<br />
❑ SPK<br />
Speaker Compartment<br />
(Extends Housing)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ SBN<br />
Stainless Steel Backplate (Polished)<br />
❑ SBP<br />
Stainless Steel Backplate (Painted)<br />
❑ SPS<br />
Security Push Button On/Off Switch<br />
❑ TCS<br />
Touch Control On/Off Switch<br />
❑ WL<br />
Wet Label<br />
❑ MOD<br />
Specify Item<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
CUSTOM COLORS AVAILABLE - CONSULT FACTORY<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For Photometric Data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
PWR4-01psyc. © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
TRANSIT<br />
4 ft<br />
SUG4<br />
Wraparound<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
DIMENSIONS<br />
4 3 / 4 "<br />
9 1 / 2 "<br />
APPLICATIONS<br />
• Transit platforms<br />
• Tunnels<br />
• Walkways<br />
• Canopies and marquees<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Prismatic acrylic wraparound lens<br />
• Closed cell neoprene gasketing<br />
• Wet location listed<br />
Cross Section<br />
48 7 / 8 "<br />
48"<br />
6 1 / 4 "<br />
17"<br />
38"<br />
17"<br />
7 /8 " Dia. Knockouts<br />
3 /8 " Dia. Mtg. Holes<br />
Side View<br />
Ceiling Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, seam welded, aluminum housing with integrated<br />
lens retention channel. Knockouts in each end allow for continous<br />
surface conduit installation.<br />
LENS: Acrylic lens with linear side prisms and conic prisms across<br />
the bottom allows wide spacing, uplight and low side wall brightness.<br />
LENS RETENTION: Two aluminum lens retention straps secure<br />
lens to housing and compresses gasketing evenly. Straps can be<br />
hinged open from either side.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
GASKETING: Full length, closed cell neoprene gasketing seals lens<br />
to housing.<br />
FINISH: Aluminum housing and lens retention straps are clear<br />
etched and anodized. Reflector is finished with white polyester powder<br />
coat over multi-stage phosphatizing pretreatment to ensure superior<br />
paint adhesion and rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
SUG4 4 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: SUG4-2/32T8-PAW-120-ESB-PHF<br />
SUG4<br />
zSeries<br />
z SUG4<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ PAW<br />
Prismatic Acrylic Wraparound<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ PHF<br />
Phillips Fasteners (Non Tamperproof)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
SUG-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
TRANSIT<br />
8 ft<br />
SUG8<br />
Wraparound<br />
Surface Luminaire<br />
2/32T8<br />
4/32T8<br />
2/40T12<br />
4/40T12<br />
DIMENSIONS<br />
4 3 / 4 "<br />
9 1 / 2 "<br />
APPLICATIONS<br />
• Transit platforms<br />
• Tunnels<br />
• Walkways<br />
• Canopies and marquees<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Prismatic acrylic wraparound lens<br />
• Closed cell neoprene gasketing<br />
• Wet location listed<br />
Cross Section<br />
96"<br />
96 7 / 8 "<br />
43" 43"<br />
Side View<br />
7 /8 " Dia.<br />
Knockouts<br />
41"<br />
41"<br />
3 /8 " Dia.<br />
Mtg. Holes<br />
Ceiling Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, seam welded, aluminum housing with<br />
integrated lens retention channel. Knockouts in each end allow for<br />
continous surface conduit installation.<br />
LENS: Acrylic lens with linear side prisms and conic prisms across<br />
the bottom allows wide spacing, uplight and low side wall<br />
brightness.<br />
LENS RETENTION: Two aluminum lens retention straps secure<br />
lens to housing and compresses gasketing evenly. Straps can be<br />
hinged open from either side.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
GASKETING: Full length, closed cell neoprene gasketing seals lens<br />
to housing.<br />
FINISH: Aluminum housing and lens retention straps are clear<br />
etched and anodized. Reflector is finished with white polyester powder<br />
coat over multi-stage phosphatizing pretreatment to ensure superior<br />
paint adhesion and rust resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
SUG8 8 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: SUG8-4/32T8-PAW-120-ESB-PHF<br />
SUG8<br />
zSeries<br />
z SUG8<br />
96" Nom. Length<br />
zLamp Count<br />
❑ 2<br />
❑ 4<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ PAW<br />
Prismatic Acrylic Wraparound<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
zHousing Options<br />
❑ AHP<br />
Aluminum Housing (Painted)<br />
❑ SHN<br />
Stainless Steel Housing (Polished)<br />
❑ SHP<br />
Stainless Steel Housing (Painted)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ PHF<br />
Phillips Fasteners (Non Tamperproof)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
SUG8-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
TRANSIT<br />
4 ft<br />
TCR1<br />
Wraparound<br />
Corner Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
1/48T12<br />
2/48T12<br />
DIMENSIONS<br />
4 1 / 2 "<br />
3 3 / 8 "<br />
APPLICATIONS<br />
• Transit platforms<br />
• Tunnels<br />
• Walkways<br />
• Canopies and marquees<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Wet location listed<br />
• Multiple lens options<br />
• Tamperproof screws<br />
• Threaded conduit hubs<br />
Cross Section<br />
50"<br />
50"<br />
30"<br />
7 /8 " Dia. Knockouts 9 /32 " Dia. Mtg. Holes<br />
Side View<br />
Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge, cold rolled steel housing. Optional<br />
3/4” threaded hubs in each end allow for continous surface conduit<br />
installation. Steel end caps secure lens in place and ensure positive<br />
lens seal.<br />
LENS: One piece, UV stabilized. See lens options.<br />
LENS RETENTION: Double walled lens channel and removable end<br />
caps securely retain lens along entire length.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
GASKETING: Full length, closed cell neoprene gasketing seals lens<br />
to housing.<br />
FASTENERS: Lens end caps secured by stainless steel tamperproof<br />
fasteners to prevent unauthorized access.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
TCR1 4 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: TCR1-2/40T12-12WA-120-ESB-TX<br />
TCR1<br />
zSeries<br />
z TCR1<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ 48T12HO<br />
❑ 48T12VHO<br />
❑ 48T12SL<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 12WA<br />
.125" White Acrylic<br />
❑ 12WADR<br />
.125" White Hi-Impact Acrylic<br />
❑ 18WP<br />
.187" White Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
zMaterial Options<br />
❑ AHP<br />
Aluminum Housing and End Caps (Painted)<br />
❑ SEN<br />
Stainless Steel End Caps (Polished)<br />
❑ SHN<br />
Stainless Steel Housing and End Caps<br />
(Polished)<br />
❑ SHP<br />
Stainless Steel Housing and End Caps<br />
(Painted)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ PHF<br />
Phillips Fasteners (Non Tamperproof)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
TCR14-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
TRANSIT<br />
2 ft<br />
TSR12<br />
Wraparound<br />
Surface Luminaire<br />
1/17T8<br />
2/17T8<br />
1/20T12<br />
2/20T12<br />
1/24T12<br />
2/24T12<br />
DIMENSIONS<br />
6"<br />
5 1 / 2 "<br />
APPLICATIONS<br />
• Transit platforms<br />
• Tunnels<br />
• Walkways<br />
• Canopies and marquees<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Wet location listed<br />
• Multiple lens options<br />
• Tamperproof screws<br />
• Threaded conduit hubs<br />
Cross Section<br />
26"<br />
26"<br />
16"<br />
13"<br />
3 1 / 4 "<br />
Side View<br />
1 /4 " Dia. Mtg. Holes 7 /8 " Dia. Knockouts<br />
Ceiling Mounting Detail<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge, cold rolled steel housing. Optional<br />
3/4” threaded hubs in each end allow for continous surface conduit<br />
installation. Steel end caps secure lens in place and ensure positive<br />
lens seal.<br />
LENS: One piece, UV stabilized. See lens options.<br />
LENS RETENTION: Double walled lens channel and removable end<br />
caps securely retain lens along entire length.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
GASKETING: Full length, closed cell neoprene gasketing seals lens<br />
to housing.<br />
FASTENERS: Lens end caps secured by stainless steel tamperproof<br />
fasteners to prevent unauthorized access.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
TSR12 2 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: TSR12-2/20T12-12WA-120-ESB-TX<br />
TSR12<br />
zSeries<br />
z TSR12<br />
24" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 17T8<br />
❑ 20T12<br />
❑ 24T12HO<br />
❑ 24T12SL<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 12WA<br />
.125" White Acrylic<br />
❑ 12WADR<br />
.125" White Hi-Impact Acrylic<br />
❑ 18WP<br />
.187" White Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
zMaterial Options<br />
❑ AHP<br />
Aluminum Housing and End Caps (Painted)<br />
❑ SEN<br />
Stainless Steel End Caps (Polished)<br />
❑ SHN<br />
Stainless Steel Housing and End Caps<br />
(Polished)<br />
❑ SHP<br />
Stainless Steel Housing and End Caps<br />
(Painted)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ PHF<br />
Phillips Fasteners (Non Tamperproof)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
Dimensions and specifications subject to change without notice.<br />
TSR12-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
TRANSIT<br />
TSR14<br />
Wraparound<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
1/48T12<br />
2/48T12<br />
DIMENSIONS<br />
6"<br />
5 1 / 2 "<br />
4 ft Ceiling Mounting Detail<br />
APPLICATIONS<br />
• Transit platforms<br />
• Tunnels<br />
• Walkways<br />
• Canopies and marquees<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Wet location listed<br />
• Multiple lens options<br />
• Tamperproof screws<br />
• Threaded conduit hubs<br />
Cross Section<br />
50"<br />
3 1 / 4 "<br />
50"<br />
38"<br />
17" 17"<br />
Side View<br />
7 /8 " Dia. Knockouts<br />
1 /4 " Dia. Mtg. Holes<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge, cold rolled steel housing. 3/4"<br />
threaded hubs in each end allow for continous surface conduit installation.<br />
Steel end caps secure lens in place and ensure positive lens<br />
seal.<br />
LENS: One piece, UV stabilized. See lens options.<br />
LENS RETENTION: Double walled lens channel and removable end<br />
caps securely retain lens along entire length.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
GASKETING: Full length, closed cell neoprene gasketing seals lens<br />
to housing.<br />
FASTENERS: Lens end caps secured by stainless steel tamperproof<br />
fasteners to prevent unauthorized access.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
TSR14 4 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: TSR14-2/40T12-12WA-120-ESB-TX<br />
TSR14<br />
zSeries<br />
z TSR14<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ 48T12HO<br />
❑ 48T12VHO<br />
❑ 48T12SL<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 12WA<br />
.125" White Acrylic<br />
❑ 12WADR<br />
.125" White Hi-Impact Acrylic<br />
❑ 18WP<br />
.187" White Polycarbonate<br />
❑ WG<br />
White Glass Lens<br />
❑ LG<br />
.125" clear glass outer w/ a<br />
.156” C73 inner layer<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
zMaterial Options<br />
❑ AHP<br />
Aluminum Housing and End Caps (Painted)<br />
❑ SEN<br />
Stainless Steel End Caps (Polished)<br />
❑ SHN<br />
Stainless Steel Housing and End Caps<br />
(Polished)<br />
❑ SHP<br />
Stainless Steel Housing and End Caps<br />
(Painted)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ PHF<br />
Phillips Fasteners (Non Tamperproof)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
TSR14-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
TRANSIT<br />
TSR16<br />
Wraparound<br />
Surface Luminaire<br />
1/72T12<br />
2/72T12<br />
DIMENSIONS<br />
6"<br />
5 1 / 2 "<br />
6 ft Ceiling Mounting Detail<br />
APPLICATIONS<br />
• Transit platforms<br />
• Tunnels<br />
• Walkways<br />
• Canopies and marquees<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Wet location listed<br />
• Multiple lens options<br />
• Tamperproof screws<br />
• Threaded conduit hubs<br />
Cross Section<br />
74"<br />
74"<br />
30" 30"<br />
3 1 / 4 "<br />
7 /8 " Dia. Knockouts<br />
1 /4 " Dia. Mtg. Holes<br />
Side View<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge, cold rolled steel housing. Optional<br />
3/4” threaded hubs in each end allow for continous surface conduit<br />
installation. Steel end caps secure lens in place and ensure positive<br />
lens seal.<br />
LENS: One piece, UV stabilized. See lens options.<br />
LENS RETENTION: Double walled lens channel and removable end<br />
caps securely retain lens along entire length.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
GASKETING: Full length, closed cell neoprene gasketing seals lens<br />
to housing.<br />
FASTENERS: Lens end caps secured by stainless steel tamperproof<br />
fasteners to prevent unauthorized access.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
TSR16 6 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: TSR16-2/72T12-12WA-120-ESB-TX<br />
TSR16<br />
zSeries<br />
z TSR16<br />
72" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 72T12<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 12WA<br />
.125" White Acrylic<br />
❑ 12WADR<br />
.125" White Hi-Impact Acrylic<br />
❑ 18WP<br />
.187" White Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑120<br />
❑277<br />
❑347<br />
❑Specify<br />
zBallast<br />
❑ESB _*<br />
Energy Saving<br />
❑ELB _*<br />
Electronic<br />
❑CWB<br />
Cold Weather<br />
❑DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
zMaterial Options<br />
❑ AHP<br />
Aluminum Housing and End Caps (Painted)<br />
❑ SEN<br />
Stainless Steel End Caps (Polished)<br />
❑ SHN<br />
Stainless Steel Housing and End Caps<br />
(Polished)<br />
❑ SHP<br />
Stainless Steel Housing and End Caps<br />
(Painted)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ PHF<br />
Phillips Fasteners (Non Tamperproof)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
TSR16-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
TRANSIT<br />
TSR18<br />
Wraparound<br />
Surface Luminaire<br />
2/32T8<br />
4/32T8<br />
2/40T12<br />
4/40T12<br />
2/48T12<br />
4/48T12<br />
1/96T12<br />
2/96T12<br />
DIMENSIONS<br />
APPLICATIONS<br />
FEATURES<br />
6"<br />
5 1 / 2 "<br />
• Transit platforms<br />
• Tunnels<br />
• Walkways<br />
• Canopies and marquees<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
• Welded construction<br />
• Wet location listed<br />
• Multiple lens options<br />
• Tamperproof screws<br />
• Threaded conduit hubs<br />
Cross Section<br />
98"<br />
3 1 / 4 "<br />
8 ft 40" 40"<br />
98"<br />
Side View<br />
1 /4 " Dia. Knockouts<br />
1 /4 " Dia. Mtg. Holes<br />
Ceiling Mounting Detail<br />
7 /8 " Dia. Knockouts<br />
SPECIFICATIONS<br />
HOUSING: Die formed, 20 gauge, cold rolled steel housing. Optional<br />
3/4” threaded hubs in each end allow for continous surface conduit<br />
installation. Steel end caps secure lens in place and ensure positive<br />
lens seal.<br />
LENS: One piece, UV stabilized. See lens options.<br />
LENS RETENTION: Double walled lens channel and removable end<br />
caps securely retain lens along entire length.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
GASKETING: Full length, closed cell neoprene gasketing seals lens<br />
to housing.<br />
FASTENERS: Lens end caps secured by stainless steel tamperproof<br />
fasteners to prevent unauthorized access.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
TSR18 8 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: TSR18-2/40T12-12WA-120-ESB-TX<br />
TSR18<br />
zSeries<br />
z TSR18<br />
96" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
❑ 4 (32T8,40T12,<br />
& 48T12 Only)<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ 48T12<br />
❑ 96T12HO<br />
❑ 96T12VHO<br />
❑ 96T12SL<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 12WA<br />
.125" White Acrylic<br />
❑ 12WADR<br />
.125" White Hi-Impact Acrylic<br />
❑ 18WP<br />
.187" White Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
zMaterial Options<br />
❑ AHP<br />
Aluminum Housing and End Caps (Painted)<br />
❑ SEN<br />
Stainless Steel End Caps (Polished)<br />
❑ SHN<br />
Stainless Steel Housing and End Caps<br />
(Polished)<br />
❑ SHP<br />
Stainless Steel Housing and End Caps<br />
(Painted)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ PHF<br />
Phillips Fasteners (Non Tamperproof)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
TSR18-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.
Job:<br />
Fixture Type:<br />
TRANSIT<br />
4 ft<br />
TSR2<br />
Wraparound<br />
Surface Luminaire<br />
1/32T8<br />
2/32T8<br />
1/40T12<br />
2/40T12<br />
1/48T12<br />
2/48T12<br />
DIMENSIONS<br />
3"<br />
6 1 / 4 "<br />
APPLICATIONS<br />
• Transit platforms<br />
• Tunnels<br />
• Walkways<br />
• Canopies and marquees<br />
• Public housing<br />
• Parks and recreational<br />
facilities<br />
FEATURES<br />
• Welded construction<br />
• Wet location listed<br />
• Multiple lens options<br />
• Tamperproof screws<br />
• Threaded conduit hubs<br />
Cross Section<br />
49 3 / 16 "<br />
3 1 / 4 "<br />
49 3 / 16 "<br />
38"<br />
7 /8 " Dia. Knockouts<br />
9 /32 " Dia. Mtg. Holes<br />
SPECIFICATIONS<br />
Side View<br />
HOUSING: Die formed, 20 gauge, cold rolled steel housing with integrated<br />
lens retention channel. Optional 3/4” threaded hubs in each<br />
end allow for continous surface conduit installation. Die formed, 18<br />
gauge, cold rolled steel end caps are gasketed to form a hermetic<br />
seal and securely hold lens in place.<br />
LENS: One piece, UV stabilized; opal polycarbonate. See lens<br />
options.<br />
LENS RETENTION: Double walled lens channel and removable end<br />
caps securely retain lens along entire length.<br />
WIRING: AWM, TFN or THHN wire used throughout, rated for<br />
required temperatures.<br />
Ceiling Mounting Detail<br />
BALLAST: Class P, energy saving ballast standard. Sound rating A,<br />
CBM/ETL certified. UL listed.<br />
GASKETING: Full length, closed cell neoprene gasketing seals lens<br />
to housing.<br />
FASTENERS: Six stainless steel torxhead fasteners secure lens in<br />
place through captive cagenuts that are accessible without removing<br />
housing from wall.<br />
FINISH: White polyester powder coat finish over multi-stage phosphatizing<br />
pretreatment to ensure superior paint adhesion and rust<br />
resistance. Reflectance: 93%.<br />
CERTIFICATION: UL listed and labeled. CSA approved. Suitable for<br />
wet locations.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com
TSR2 4 ft Wraparound Surface Luminaire<br />
ORDERING INFORMATION<br />
Example: TSR2-2/40T12-12WA-120-ESB-TX<br />
TSR2<br />
zSeries<br />
z TSR2<br />
48" Nom. Length<br />
zLamp Count<br />
❑ 1<br />
❑ 2<br />
zLamp Type<br />
❑ 32T8<br />
❑ 40T12<br />
❑ 48T12HO<br />
❑ 48T12VHO<br />
❑ 48T12SL<br />
❑ LMP (Specify)<br />
zLens Options<br />
❑ 12PP<br />
.125" Prismatic Polycarbonate<br />
❑ 15PP<br />
.156" Prismatic Polycarbonate<br />
❑ 18PP<br />
.187" Prismatic Polycarbonate<br />
❑ 12WA<br />
.125" White Acrylic<br />
❑ 12WADR<br />
.125" White Hi-Impact Acrylic<br />
❑ 18WP<br />
.187" White Polycarbonate<br />
❑ LNS<br />
Specify Item<br />
zVoltage<br />
❑ 120<br />
❑ 277<br />
❑ 347<br />
❑ Specify<br />
zBallast<br />
❑ ESB _*<br />
Energy Saving<br />
❑ ELB _*<br />
Electronic<br />
❑ CWB<br />
Cold Weather<br />
❑ DIM<br />
Dimming<br />
*Specify Qty.<br />
(Optional)<br />
zOptions<br />
❑ EBP<br />
Emergency Battery Pack<br />
❑ GLR<br />
Fast-blow Fuse<br />
❑ RIF<br />
Radio Interference Filter<br />
zMaterial Options<br />
❑ AHP<br />
Aluminum Housing and End Caps (Painted)<br />
❑ SEN<br />
Stainless Steel End Caps (Polished)<br />
❑ SHN<br />
Stainless Steel Housing and End Caps<br />
(Polished)<br />
❑ SHP<br />
Stainless Steel Housing and End Caps<br />
(Painted)<br />
❑ MOD<br />
Specify Item<br />
zAccessories (Order Separately)<br />
❑ TXD<br />
Torxhead Tamperproof Screwdriver<br />
❑ ALD<br />
Allenhead Tamperproof Screwdriver<br />
zFastener Options<br />
❑ TX<br />
Torxhead (Center Pin Reject)<br />
❑ AL<br />
Allenhead (Center Pin Reject)<br />
❑ PHF<br />
Phillips Fasteners (Non Tamperproof)<br />
ORDERING NOTES<br />
JOB INFORMATION<br />
Job:<br />
Remarks:<br />
Type:<br />
Cat#:<br />
Date:<br />
Approval:<br />
(For photometric data, consult factory.)<br />
Dimensions and specifications subject to change without notice.<br />
Corporate Headquarters<br />
9601 John Street<br />
Santa Fe Springs, CA 90670<br />
TEL (562) 923-9600<br />
FAX (562) 923-7555<br />
www.holcor.com<br />
TSR2-01 © Copyright 2002 <strong>Myers</strong> <strong>Power</strong> <strong>Products</strong>, <strong>Inc</strong>.