NAINC Series - Myers Power Products, Inc.
NAINC Series - Myers Power Products, Inc.
NAINC Series - Myers Power Products, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Lighting <strong>Products</strong><br />
<strong>NAINC</strong> <strong>Series</strong><br />
INCANDESCENT FOR HIGH HUMIDITY AREAS<br />
5-Lamp Fixture - Nominal 180 Watts<br />
600V DC Input Voltage<br />
The <strong>NAINC</strong> <strong>Series</strong> incandescent fixture is designed for indoor/<br />
outdoor applications that require resistance to high humidity or<br />
tampering. Ideally suited for subway systems and tunnel<br />
applications.<br />
• EXTRUDED ALUMINUM HOUSING<br />
• VANDAL RESISTANT FIXTURE<br />
• EASY INSTALLATION WITH PENDANT MOUNTING<br />
• SUITABLE FOR WET LOCATIONS<br />
MAIN BODY:<br />
Main body housing is 2" deep extruded 6063-T6 aluminum with<br />
a minimum wall thickness of .125". Housing end plates are<br />
cast aluminum. After primer coat, finish is white powder coat<br />
paint. Other colors available at additional cost.<br />
Main body housing end gasket is 1/8" thick PVC vinyl foam.<br />
Each end plate has a threaded opening with plug to accept 1"<br />
rigid galvanized steel conduit. All exposed screws are tamperproof<br />
(countersunk) #8-32 (T15) Torx Flat head, stainless steel<br />
screws.<br />
DIFFUSER:<br />
Clear Lexan #943, .120 minimum thickness extruded diffuser<br />
with refracting prisms on the inside for light distribution and<br />
brightness control. Smooth exterior for ease of cleaning and<br />
maintenance. Injection molded end caps are .125 minimum<br />
thickness and sonic welded to extruded diffuser to form a onepiece,<br />
vandal-resistant assembly with integral hinge on one<br />
side. Door diffuser gasket is 1/8" thick PVC vinyl foam.<br />
LAMPS:<br />
36 Watt ARY 130 Volt medium base incandescent (5 required).<br />
Lamps are not included.<br />
LAMP HOLDER:<br />
Sockets (5 required) are porcelain medium base and wired in<br />
series to accept 600V DC input voltage. Reflector/Socket Plate,<br />
constructed from #18 ga. steel and finished in white powder<br />
coat, is secured by 1/4-turn spring loaded pawl latches (4<br />
required).<br />
MOUNTING:<br />
Clevis hanger consists of pendant mount, 3/16" thick by 1 1/2"<br />
wide, made of galvanized steel and finished with powder coat<br />
paint over a primer coat.<br />
5 7/8"<br />
8 3/8"<br />
8/14/02
Product ID<br />
Model No.<br />
Lamp<br />
Wattage<br />
Light<br />
Source<br />
ORDERING INFORMATION<br />
Voltage<br />
Lens<br />
Type<br />
Finish &<br />
Color<br />
Mounting<br />
<strong>NAINC</strong> - 180 - INC - 600DC - CLA -<br />
- PEN<br />
Lamp<br />
Wattage<br />
180 Total wattage (Std.)<br />
Light<br />
Source<br />
INC <strong>Inc</strong>andescent<br />
Voltage<br />
600DC (Std.)<br />
Lens<br />
Type<br />
CLA<br />
Clear Lexan #943 (Std.)<br />
Finish &<br />
Color<br />
WPC White Powder Coat (Std.)<br />
CC Custom color (please specify)<br />
Mounting<br />
PEN Pendant mount (Std.)<br />
(Pendants not included)<br />
24 1/4"<br />
Side View (pendant mount excluded)<br />
9603 John Street<br />
Santa Fe Springs, CA 90670<br />
Lighting <strong>Products</strong><br />
Toll Free Tel: 1-800-733-7872<br />
www.myersnuart.com<br />
Specifications are subject to change without notice to reflect improvements and upgrades.<br />
Job:<br />
Fixture Type:<br />
Date: