Price List 2010 - 3D Air Sales Ltd.

Air to Water Heat Pump
High Performance
Air Sourced Heat Pumps dominate the
heat pump market, mainly for commercial
buildings, but increasingly more now for
residential. Over 200,000 air sourced heat
pumps are installed each year in the UK.
Air to Water (A2W) Heat Pumps provide
much flexibility for small houses and
apartments, allowing combinations of under
floor heating, heating of domestic water,
and in the case of this new Mitsubishi
system, heating and cooling (summer
operation) through fan coil type units.
Operation:
The outdoor air is the heat source. The
small Mitsubishi FDCW outdoor unit
can be discretely located outside, and is
connecterd by two small copper pipes to
the HM270V indoor unit.
The complete system is capable of
collecting and transferring 9kW of heat
energy sourced from the outdoor air
to provide heat inside the building,
whilst consuming only 2.5kW (approx)
of electricity. This ratio of heat energy
delivered to energy consumed, is known
as the Coefficient of Performance (C.o.P.)
Features:
• Optimum operational costs (electricity consumption) thanks to
Mitsubishi proven Inverter technology
• Compact Indoor Unit with integrated water tank, heat exchanger,
and controls. Footprint is only 600mm x 650mm.
• Auxillary electric immersion heater included, to boost domestic
water temperature up to 65 o C.
• Can be integrated with alternative heat sources, e.g. solar panels,
gas boiler.
• Cooling operation feature, using chilled water in the fan coil units.
• C.o.P. Heating up to 3.7kW - an industry best!
For further information and price quotation, please contact
the 3D Technical Centre, or visit www.hrponline.co.uk