INSTALLATION OF ANTI-COLLAPSE MESH Storage of materials ...

More documents

Recommendations

Info

c) Once inducted the operatives will unload & check the delivery of materials, which will be delivered by a nominated haulage company and will be stored on safely on site. d) The materials will be transferred into the work area in a safe and organized manner. e) We will check and clarify the cage / enclosure position, as detailed on the drawings, with the site manager or customer before the fence erection starts. Protective Equipment for Personal Hard hats, toe protectors and Hi-Vis jackets will be worn at all times. Goggles will be worn when drilling and cutting with electrical cutters A hot work permit will be obtained if required Hazardous Material - COSHH There will be no hazardous materials and or substances used during this project. Plant Equipment 110V equipment will be used, fed by an on site transformer and onto tools via 110v leads. All equipment is less than 6 months old with the relevant bills of purchase. All electrical equipment over 6 months old will have a “PAT” test certificate or labels on tools. Material Storage Materials will be stored near the work area in a safe and organized fashion. Special Safety Rules Site induction will be undertaken prior to commencement of work. Manual Handling
All materials and tools will be manually handled carefully to the work area in accordance with our health and safety policy. This process will require the method of lifting the panels and tying knots in ropes, a recognized safety knot will be used and limitation to weights will be adhered to. Noise and Environmental Pollution This will be minimal i.e. Drilling steel and cutting steel, all dust and swarf will be cleared up and disposed of by Installers into rubbish skips on site. The drilling will cause a short minimal noise level per hole, whilst we take measures to ensure that our installers are locally protected against dust and noise the precaution of “further transmitted noise” cannot be avoided during this installation. Drilling and Cutting The above items all require the drilling of holes in to concrete, these holes will drilled with a “Hilti Type Drill” powered from a on site 110volt Transformer Disposal of Materials Removed materials will be disposed of under the control of a “Waste Management System”, any excess debris will be placed in the skips, origin to be confirmed. Product specific build details Method of Work – Troax Musca all Mesh f) Generally the Musca will be built with panels in brick type build fashion. g) The panels are bolted together using m8 x 55mm bolts on the horizontal joints and a clamp (35700001) on the vertical joints of the first and top row of panels only, refer to the supplied drawings and follow me assembly instructions. h) The screen will be built by bolting a row of level brackets directly to the racking frames at the required start height generally as close to the floor as possible and at panel dimensions of 1500, 1200 or 700mm there after.
Page 1: Storage of materials INSTALLATION O

INSTALLATION OF ANTI-COLLAPSE MESH Storage of materials ...

Create successful ePaper yourself

Delete template?

Save as template?