You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Select-O-Matic ® … The Industry Leader in Automatic Nozzles!<br />
Select-O-Matic ® Nozzles<br />
Select-O-Matic ®<br />
Nozzles<br />
Features:<br />
• Durable, Lightweight Elk-O-Lite ® Construction<br />
• Automatically Adjust to Changing Flows<br />
• Constant Flow – Flush Feature<br />
• Flow Efficient – Fully Machined Waterway<br />
• Hydraulically Balanced Ball Shutoff<br />
• Adjustable Neoprene Seat with Acetal Ball<br />
• Rugged, Aluminum/Bronze Shutoff Handle with<br />
Double Stops<br />
• Heavy-Duty, Protective Urethane Bumper<br />
• Replaceable Spinning Teeth for Wide, Protective Fog<br />
• Durable, Non-Slip Pistol Grip<br />
• Four Flow Ranges – Lexan Labeling<br />
• Models for 1.0", 1.5", 1.75", 2.0", 2.5" & 3.0" Hose<br />
• Optional Low Pressure Models<br />
• Optional Molded Urethane Teeth on Some Models<br />
SM-3F 1.0" Select-O-Matic ® Nozzle<br />
Flows from 10 to 75 GPM • Tab handle standard<br />
• Horseshoe handle optional • 1.0" waterway • 1.0" free<br />
swivel base standard • 1.0" rigid base optional<br />
• Finish hard anodized.<br />
SM-3FG 1.0" Select-O-Matic ® Nozzle<br />
With Pistol Grip (Not Shown)<br />
Same as SM-3F except with rugged, Elk-O-Lite pistol grip.<br />
TSM-3F 1.0" Select-O-Matic ® Nozzle Tip<br />
(Not shown)<br />
Same as SM-3F except tip only • No twist shutoff.<br />
SM-10F 1.5" Select-O-Matic ® Nozzle<br />
Flows from 60 to 125 GPM • Horseshoe handle standard • Tab handle optional • 1.0" waterway<br />
• Replaceable spinning teeth standard • Molded urethane teeth optional • 1.5" swivel base standard<br />
• 1.5" rigid or free swivel base optional • Finish hard anodized.<br />
SM-10FG 1.5" Select-O-Matic ® Nozzle With Pistol Grip<br />
Benefits:<br />
• Years of Dependable Service<br />
• Maintain Effective Pressure and Stream<br />
• Excellent Stream Quality – Straight Stream<br />
to Wide Fog<br />
• Simplifies Fireground Hydraulics<br />
• More Flow Efficient than Other Automatics<br />
• Ideal for Use with Foam Eductors<br />
• Ease of Operation – Even at Higher Flows<br />
• Same Gallonage – Straight Stream to Wide Fog<br />
• Flush Without Shutting Down<br />
• Excellent for Application of AFFF<br />
• Superb Wide Fog for Personal Protection and<br />
Heat Absorption<br />
• Easy Field Service<br />
• Excellent for Application of Class A Foam<br />
• Easy to Work With – Easy to Train With<br />
• Operate at Lower Pressures with Some Models<br />
• Compliance with NFPA 1964<br />
• Elkhart Quality<br />
Same as SM-10F except with rugged, Elk-O-Lite pistol grip and 1.5" free swivel base.<br />
Optional Molded<br />
Urethane Teeth<br />
Now! Molded<br />
urethane teeth<br />
are available,<br />
upon request,<br />
on all SM-10F and SM-20F series<br />
nozzles. This one piece molded<br />
urethane ring replaces the spinning<br />
teeth and metal retainer ring<br />
that come as standard.<br />
SM-10FB 1.5" Select-O-Matic ® (Not shown)<br />
Same as SM-10F except all brass construction • Finish chrome plated.<br />
TSM-10F 1.5" Select-O-Matic ® Nozzle Tip (Not shown)<br />
Same as SM-10F except tip only • No twist shutoff.<br />
Additional<br />
Specifications<br />
on Page 92<br />
STSM-10F 1.5" Select-O-Matic ® Break-Apart Nozzle (Not shown)<br />
Combination of TSM-10F and LB-275A ball shutoff.<br />
Select-O-Matic ® Nozzles<br />
SM-20F Mid-Range Select-O-Matic ® Nozzle<br />
Flows from 60 to 200 GPM • Easy “One for One Hydraulics” • Horseshoe handle standard • Tab<br />
handle optional • 1.5" swivel base standard • 1.5" rigid or free swivel optional • Replaceable spinning<br />
teeth standard • Molded urethane teeth optional • 1.375" waterway • Finish hard anodized.<br />
SM-20FG Mid-Range Select-O-Matic ® Nozzle with Pistol Grip<br />
Same as SM-20F except with rugged, Elk-O-Lite pistol grip and 1.5" free swivel base.<br />
“One for One Hydraulics”<br />
With an SM-20F series nozzle on 200' of 1.75" hose and for flows above 100 GPM, every 1 psi<br />
increase of discharge pressure, will increase the flow 1 GPM; i.e., to flow 125 GPM the discharge<br />
pressure would have to be 125 psi; to flow 200 GPM, the discharge would have to be 200 psi: to<br />
flow 160 GPM, the discharge would have to be 160 psi. One GPM for one psi. What could be easier?