Catalog - Da Miano & Graham

Catalog C 

Elkhart Brass 

Fire Fighting Equipment 

Celebrating 100 Years of Fire Fighting Progress 

“The Most Experienced Manufacturer of Fire Fighting Equipment”

Dear Fire Service Patron, 

Since our company’s founding in 1902 by Albert E. Hansen, 

a Norwegian immigrant, we have been owned and operated 

by the same family. As we celebrate our 100th anniversary 

this year, we are in the fourth generation of management, 

and our commitment to excellence has never been stronger. 

In this new catalog, we offer you the safest, most efficient 

and durable firefighting equipment available. Besides the 

painstaking effort of development, design and manufacture 

of these products, each and every one is thoroughly tested 

before shipment. This is just one way to assure you of the 

safest equipment possible. 

Thank you for your patronage this past 100 years. We look 

forward to serving you and the entire fire service community 

throughout the 21st century. God Bless America and 

America’s Bravest! 

The Ashbaugh Family 

Pete, Jeannie, Rusty, Shawn and Hans

Table of Contents 

CATALOG “C” 

New! 

… Color-Coded Handles and 

Pistol Grips! 

All Select-O-Matic and Chief nozzles as well as all Elk-O-Lite ball 

shutoffs in this catalog are available with color-coded shutoff 

handles and pistol grips, at no extra charge. The colors are applied 

by a powder coating process to assure a tough, long-lasting finish. 

The 8 available colors are: 

BLUE, ORANGE, GREEN, WHITE, GRAY, RED, BLACK and YELLOW 

Please specify the color of your choice at the time of purchase. 

Contents 

Page 

Handline Nozzles; 

Select-O-Matic ® ..........................................................................................2-5 

Chief ® .................................................................................................................6-9 

Low Pressure.........................................................................................5, 9, 12, 13 

Select-O-Flow ® .......................................................................................10, 11 

Ball Shutoffs and Playpipes............................................................................14, 15 

Smooth Bore Tips ................................................................................................16 

Select-O-Stream ® and Cellar Nozzles..........................................................17 

Master Stream Nozzles; 

Select-O-Matic ® ...............................................................................18, 19, 73 

Select-O-Stream ® , Select-O-Flow ® .........................................20, 72, 73 

Hydro-Foam ® ...........................................................................................21, 73 

Hose and Nozzle Accessories; 

Pistol Grip Adapters, Portable Flow Meter, Hose Clamp, 

Piezometer Gauges, and Hose Strap ....................................................................22 

Monitors/Deck Guns (Fire Department); 

Scorpion ® , Sidewinder, Python ® , 

Stinger® and Traditional ...............................................................................24-29 

Portable Monitors (Fire Department); 

Stinger® and Traditional...............................................................................30-33 

Monitor Accessories/Stream Shapers .....................................................................34 

Fireground Appliances; 

Wyes, Siamese, Water Thiefs, Manifolds 

and LDH Appliances........................................................................................36-39 

Foam Eductors and Related Equipment .............................................................40-43 

Apparatus Valves; 

Hydro-Loc ® , Gear Actuated, Electrically Actuated, 

Butterfly and Piston Intake..............................................................................45-55 

Apparatus Fittings and Accessories; 

Drain Valves, Relief Valves, Swivel Elbows, Mounting 

Brackets, Strainers, and Remote Control Hardware........................................56-60 

Hose Caps, Plugs, Adapters and Nipples..........................................................61, 62 

Wrenches and Wrench Holders ...............................................................................63 

Monitors (Industrial); 

Stingray ® , Spit-Fire®, Python ® , Traditional, 

Elevated, Remote Controlled and Accessories..........................................65-71, 74 

Nozzles (Industrial and Marine); 

Select-O-Matic ® , Select-O-Flow ® , Hydro-Foam ® , 

Mystery ® , Electrical and Special Application ..................................72, 73, 75-77 

Valves (Industrial)....................................................................................................78 

Field Service Kits and Tools ..............................................................................79, 80 

Nozzle Flow Data; 

Charts, Data, Formulae and Specifications......................................................81-95 

Indexes ..............................................................................................................96-100 

Customer No. ________________________ 

Discount(s): ________________________ 

________________________ 

Elkhart Brass 

Fire Fig hting E q uipment 

P.O. Box 1127 ■ Elkhart, IN 46515 

Phone: (574) 295-8330 

Fax: (574) 293-9914 

(800) 346-0250 

Web Site: www.elkhartbrass.com 

e-mail: info@elkhartbrass.com

Select-O-Matic ® … The Industry Leader in Automatic Nozzles! 

Select-O-Matic ® Nozzles 

Select-O-Matic ® 

Nozzles 

Features: 

• Durable, Lightweight Elk-O-Lite ® Construction 

• Automatically Adjust to Changing Flows 

• Constant Flow – Flush Feature 

• Flow Efficient – Fully Machined Waterway 

• Hydraulically Balanced Ball Shutoff 

• Adjustable Neoprene Seat with Acetal Ball 

• Rugged, Aluminum/Bronze Shutoff Handle with 

Double Stops 

• Heavy-Duty, Protective Urethane Bumper 

• Replaceable Spinning Teeth for Wide, Protective Fog 

• Durable, Non-Slip Pistol Grip 

• Four Flow Ranges – Lexan Labeling 

• Models for 1.0", 1.5", 1.75", 2.0", 2.5" & 3.0" Hose 

• Optional Low Pressure Models 

• Optional Molded Urethane Teeth on Some Models 

SM-3F 1.0" Select-O-Matic ® Nozzle 

Flows from 10 to 75 GPM • Tab handle standard 

• Horseshoe handle optional • 1.0" waterway • 1.0" free 

swivel base standard • 1.0" rigid base optional 

• Finish hard anodized. 

SM-3FG 1.0" Select-O-Matic ® Nozzle 

With Pistol Grip (Not Shown) 

Same as SM-3F except with rugged, Elk-O-Lite pistol grip. 

TSM-3F 1.0" Select-O-Matic ® Nozzle Tip 

(Not shown) 

Same as SM-3F except tip only • No twist shutoff. 

SM-10F 1.5" Select-O-Matic ® Nozzle 

Flows from 60 to 125 GPM • Horseshoe handle standard • Tab handle optional • 1.0" waterway 

• Replaceable spinning teeth standard • Molded urethane teeth optional • 1.5" swivel base standard 

• 1.5" rigid or free swivel base optional • Finish hard anodized. 

SM-10FG 1.5" Select-O-Matic ® Nozzle With Pistol Grip 

Benefits: 

• Years of Dependable Service 

• Maintain Effective Pressure and Stream 

• Excellent Stream Quality – Straight Stream 

to Wide Fog 

• Simplifies Fireground Hydraulics 

• More Flow Efficient than Other Automatics 

• Ideal for Use with Foam Eductors 

• Ease of Operation – Even at Higher Flows 

• Same Gallonage – Straight Stream to Wide Fog 

• Flush Without Shutting Down 

• Excellent for Application of AFFF 

• Superb Wide Fog for Personal Protection and 

Heat Absorption 

• Easy Field Service 

• Excellent for Application of Class A Foam 

• Easy to Work With – Easy to Train With 

• Operate at Lower Pressures with Some Models 

• Compliance with NFPA 1964 

• Elkhart Quality 

Same as SM-10F except with rugged, Elk-O-Lite pistol grip and 1.5" free swivel base. 

Optional Molded 

Urethane Teeth 

Now! Molded 

urethane teeth 

are available, 

upon request, 

on all SM-10F and SM-20F series 

nozzles. This one piece molded 

urethane ring replaces the spinning 

teeth and metal retainer ring 

that come as standard. 

SM-10FB 1.5" Select-O-Matic ® (Not shown) 

Same as SM-10F except all brass construction • Finish chrome plated. 

TSM-10F 1.5" Select-O-Matic ® Nozzle Tip (Not shown) 


Additional 

Specifications 

on Page 92 

STSM-10F 1.5" Select-O-Matic ® Break-Apart Nozzle (Not shown) 

Combination of TSM-10F and LB-275A ball shutoff. 


SM-20F Mid-Range Select-O-Matic ® Nozzle 

Flows from 60 to 200 GPM • Easy “One for One Hydraulics” • Horseshoe handle standard • Tab 

handle optional • 1.5" swivel base standard • 1.5" rigid or free swivel optional • Replaceable spinning 

teeth standard • Molded urethane teeth optional • 1.375" waterway • Finish hard anodized. 

SM-20FG Mid-Range Select-O-Matic ® Nozzle with Pistol Grip 


“One for One Hydraulics” 

With an SM-20F series nozzle on 200' of 1.75" hose and for flows above 100 GPM, every 1 psi 

increase of discharge pressure, will increase the flow 1 GPM; i.e., to flow 125 GPM the discharge 

pressure would have to be 125 psi; to flow 200 GPM, the discharge would have to be 200 psi: to 

flow 160 GPM, the discharge would have to be 160 psi. One GPM for one psi. What could be easier?



TSM-20F Mid-Range Select-O-Matic ® Nozzle Tip 


STSM-20F Mid-Range Select-O-Matic ® Break-Apart Nozzle (Not Shown) 

Combination of TSM-20F and B-275A ball shutoff. 

STSM-20FAT Mid-Range Select-O-Matic ® Break-Apart Nozzle (Not Shown) 

Combination of TSM-20F and B-275AT ball shutoff. 

STSM-20FG Mid-Range Select-O-Matic ® Break-Apart Nozzle with Pistol Grip (Not Shown) 

Combination of TSM-20F and B-275GA ball shutoff. 


STSM-20FGAT Mid-Range Select-O-Matic ® Break-Apart Nozzle with Pistol Grip 

Combination of TSM-20F and B-275-GAT ball shutoff. 

SM-30F Mid-Range Select-O-Matic ® Nozzle 

Flows from 75 to 325 GPM • Horseshoe handle standard • Tab handle optional 

• 1.375" waterway • 1.5" swivel base standard • 1.5" rigid or free swivel base optional 

• Finish hard anodized. 

SM-30FG Mid-Range Select-O-Matic ® Nozzle with Pistol Grip 


TSM-30F Mid-Range Select-O-Matic ® Nozzle Tip 

Same as SM-30F except tip only • No twist shutoff • Optional 2.5" swivel base. 

STSM-30F Mid-Range Select-O-Matic ® Break-Apart Nozzle (Not Shown) 

Combination of TSM-30F and B-275A ball shutoff. 

STSM-30FG Mid-Range Select-O-Matic ® Break-Apart Nozzle With Pistol Grip 

Combination of TSM-30F and B-275-GA ball shutoff. 

STSM-30FAT Mid-Range Select-O-Matic ® Break-Apart Nozzle (Not Shown) 

Combination of TSM-30F and B-275AT ball shutoff. 

STSM-30FGAT Mid-Range Select-O-Matic ® Break-Apart Nozzle with Pistol Grip (Not Shown) 

Combination of TSM-30F and B-275-GAT ball shutoff. 

Hose Threads Flow @ 100 psi 

Model Size Base Tip GPM L/Min Length Wt. Lbs. 

SM-3F 

SM-3FG 

TSM-3F 

SM-10F 

SM-10FB 

SM-10FG 

TSM-10F 

STSM-10F 

SM-20F 

SM-20FG 

TSM-20F 

1.0" 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5", 1.75" 

1.5", 1.75" 

1.5", 1.75" 

1.0" 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

— 

— 

— 

— 

— 

— 

— 

1.5" 

— 

— 

— 

10-75 

10-75 

10-75 

60-125 

60-125 

60-125 

60-125 

60-125 

60-200 

60-200 

60-200 

38-284 

38-284 

38-284 

225-475 

225-475 

225-475 

225-475 

225-475 

225-757 

225-757 

225-757 

9.625" 

9.625" 

7.00" 

9.50" 

9.50" 

9.875" 

7.00" 

11.125" 

11.00" 

11.375" 

7.00" 

4.25 

4.50 

2.25 

4.625 

8.25 

4.875 

2.25 

4.125 

5.375 

5.625 

2.25 

Additional Flow Data on Page 85. 



STSM-20F 

STSM-20FAT 

STSM-20FG 

STSM-20FGAT 

SM-30F 

SM-30FG 

TSM-30F 

STSM-30F 

STSM-30FAT 

STSM-30FG 

STSM-30FGAT 

1.5", 1.75" 

1.5", 1.75" 

1.5", 1.75" 

1.5", 1.75" 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

— 

— 

— 

1.5" 

1.5" 

1.5" 

1.5" 

60-200 

60-200 

60-200 

60-200 

75-325 

75-325 

75-325 

75-325 

75-325 

75-325 

75-325 

225-757 

225-757 

225-757 

252-757 

284-1230 

284-1230 

284-1230 

284-1230 

284-1230 

284-1230 

284-1230 

11.625" 

12.625" 

12.00" 

12.75" 

11.25" 

11.625" 

8.125" 

12.50" 

14.25" 

12.875" 

14.375" 

5.50 

5.125 

5.75 

5.625 

7.25 

7.50 

4.00 

7.625 

6.875 

7.875 

7.375 

Select-O-Matic ® Nozzles




New Engine Pressure Guide 

DSM-30F 2.5" Select-O-Matic ® Nozzle 

Redesigned for both regular and low pressure Select-O-Matics ® , 

this new pocket size slide chart is easy to use: just select flow 

desired; select nozzle model used; select size and length of hose lay; 

read engine pressure needed to achieve desired flow. An Engine 

Pressure Guide is furnished with every Select-O-Matic ® handline 

nozzle and is available to all Select-O-Matic ® nozzle users on a 

no/charge basis. 

Flows from 75 to 325 GPM • Horseshoe handle standard • Tab handle optional • 2.5" swivel base 

standard • 2.5" rigid or free swivel base optional • Finish hard anodized. 

DSM-30FG 2.5" Select-O-Matic ® Nozzle with Pistol Grip 

Same as DSM-30F except with rugged, Elk-O-Lite pistol grip and 2.5" free swivel base. 

DTSM-30F 2.5" Select-O-Matic ® Nozzle Tip (Not Shown) 

Same as TSM-30F (Pg. 3) except with 2.5" swivel base • No twist shutoff. 

STDSM-30F 2.5" Select-O-Matic ® Break-Apart Nozzle (Not Shown) 

Combination of TSM-30F and DB-275A ball shutoff. 

STDSM-30FG 2.5" Select-O-Matic ® Break-Apart Nozzle with Pistol Grip 

(Not Shown) 

Combination of TSM-30F and DB-275-GA ball shutoff. 

STDSM-30FAT 2.5" Select-O-Matic ® Break-Apart Nozzle (Not Shown) 

Combination of TSM-30F and DB-275-AT ball shutoff. 

STDSM-30FGAT 2.5" Select-O-Matic ® Break-Apart Nozzle with Pistol Grip 

(Not Shown) 

Combination of TSM-30F and DB-275-GAT ball shutoff. 


SM-30PL 2.5" Select-O-Matic ® Playpipe Combination 

Combination of SM-30F and 279-LA playpipe. 



DSM-30F 

DSM-30FG 

DTSM-30F 

STDSM-30F 

STDSM-30FG 

2.5", 3.0" 

2.5", 3.0" 

2.5", 3.0" 

2.5", 3.0" 

2.5", 3.0" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

— 

— 

— 

1.5" 

1.5" 

75-325 

75-325 

75-325 

75-325 

75-325 

284-1230 

284-1230 

284-1230 

284-1230 

284-1230 

14.50" 

14.50" 

8.25" 

15.25" 

15.25" 

8.00 

8.50 

4.25 

8.25 

8.50 

STSM-30PL 2.5" Select-O-Matic ® Playpipe Combination 

(Not Shown) 

Combination of TSM-30F, B-275A ball shutoff and 279-LA playpipe. 

STSM-30BPA 2.5" Select-O-Matic ® Playpipe Combination 

Combination of TSM-30F and B-278-L playpipe. 

Additional 


on Page 92 



STDSM-30FAT 

STDSM-30FGAT 

SM-30PL 

STSM-30PL 

STSM-30BPA 

2.5", 3.0" 

2.5", 3.0" 

2.5", 3.0" 

2.5", 3.0" 

2.5", 3.0" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

75-325 

75-325 

75-325 

75-325 

75-325 

284-1230 

284-1230 

284-1230 

284-1230 

284-1230 

15.75" 

15.75" 

21.75" 

23.25" 

18.5" 

8.375 

8.625 

10.875 

14.00 

11.50 

Additional Flow Data on Page 85.


Low Pressure Select-O-Matic ® Nozzles 

SM-20FLP Mid-Range Select-O-Matic ® Nozzle 

Same as SM-20F (pg.2) except operates at 75 psi rather than 

100 psi • See features and benefits on page 2. 

SM-20FGLP Mid-Range Select-O-Matic ® 

Nozzle with Pistol Grip 

Same as SM-20FLP except with rugged, Elk-O-Lite pistol grip and 

1.5" free swivel base. 

TSM-20FLP Mid-Range Select-O-Matic ® Nozzle Tip (Not Shown) 

Same as SM-20FLP except tip only • No twist shutoff. 


STSM-20FATLP Mid-Range Select-O-Matic ® Break-Apart Nozzle (Not Shown) 

Combination of TSM-20FLP tip and B-275-AT ball shutoff. 

STSM-20FGATLP Mid-Range Select-O-Matic ® Break-Apart Nozzle with Pistol Grip 

Combination of TSM-20FLP tip and B-275-GAT ball shutoff. 

SM-30FLP Mid-Range Select-O-Matic ® Nozzle 

Same as SM-30F (pg. 3) except operates at 75 psi rather than 100 psi • See features and benefits on page 2. 

SM-30FGLP Mid-Range Select-O-Matic ® Nozzle with Pistol Grip 

Same as SM-30FLP except with rugged, Elk-O-Lite pistol grip and 1.5" free swivel base. 

TSM-30FLP Mid-Range Select-O-Matic ® Nozzle Tip (Not Shown) 

Same as SM-30FLP (pg. 3) except tip only • No twist shutoff. 

STSM-30FATLP Mid-Range Select-O-Matic ® Break-Apart Nozzle (Not Shown) 

Combination of TSM-30FLP tip and B-275-AT ball shutoff. 

STSM-30FGATLP Mid-Range Select-O-Matic ® Break-Apart Nozzle With Pistol Grip 

Combination of TSM-30FLP tip and B-275-GAT ball shutoff. 

DSM-30FLP 2.5" Select-O-Matic ® Nozzle 

Same as DSM-30F (pg. 4) except operates at 75 psi rather than 100 psi • See features and 

benefits on page 2. 

DSM-30FGLP 2.5" Select-O-Matic ® Nozzle with Pistol Grip (Not Shown) 

Same as DSM-30FLP except with rugged, Elk-O-Lite pistol grip and 2.5" free swivel base. 

STDSM-30FGATLP 2.5" Select-O-Matic ® Break-Apart Nozzle 

with Pistol Grip (Not Shown) 

Combination of TSM-30FLP amd DB-275-GAT ball shutoff. 

STSM-30BPALP 2.5" Select-O-Matic ® Playpipe Combination 

Combination of TSM-30FLP and B-278-L playpipe. 

For weights and dimensions refer to charts on pages 3 and 4. 

Select-O-Matic ® Nozzles

“A Century of Trust” 

CHIEF ® Nozzles 

chief ® 

Nozzles 

Features: 


• Combination Fog and Straight Stream 

• Constant/Single Gallonage 


• Flush Feature 

• Hydraulically Balanced Ball Shutoff 

• Adjustable Neoprene Seat with Acetal Ball 

• Heavy-Duty, Protective Urethane Bumper 

• Rugged Aluminum/Bronze Shutoff Handle with Double Stops 

• Replaceable, Spinning Teeth for Wide, Protective Fog 

• Durable, Non-Slip Pistol Grip – Lexan Labeling 

• Wide Range of Gallonages Available 

• Gallonage Stamped on Stem Head 

• Optional Low Pressure Gallonage on Some Models 

• Optional Molded Urethane Teeth on Some Models 

Benefits: 


• Excellent Stream Quality – Straight Stream 

and Fog 


• Ease of Operation 

• Same Gallonage – Straight Stream to Wide Fog 

• Excellent for Use with AFFF and Class A Foam 


• Flush Without Shutting Down 

• Excellent Wide Fog for Personal Protection 

• Large Gallonage Selection 

• Operate at Lower Pressures with Some Models 

• Easy to Work With – Easy to Train With 



4000-01 1.0" Chief ® Nozzle (Not Shown) 

Same as 4000-02 except with 1.0" rigid base. 

chief ® … There’s Only One! 

4000-02 1.0" Chief ® Nozzle 

30 GPM standard • 15, 45, 60 GPM optional • Tab handle standard • 1.0" waterway 

• Horseshoe handle optional • 1.0" free swivel base • Finish hard anodized. 

4000-03 1.0" Chief ® Nozzle with Pistol Grip 

Same as 4000-02 except with rugged, cast Elk-O-Lite pistol grip and 1.0" free swivel base. 

4000-10 1.5" Chief ® Nozzle 

95 GPM standard • 60, 75, 125, and 150 GPM optional • Optional low pressure gallonages 

available: 125 GPM @ 75 psi • Horseshoe handle standard • 1.0" waterway • Tab handle 

optional • 1.5" swivel base • Finish hard anodized. 


Same as 4000-10 except with 1.5" rigid base. 


Same as 4000-10 except with 1.5" free swivel base. 


Same as 4000-10 except with rugged, cast Elk-O-Lite 

pistol grip and 1.5" free swivel base. 

Optional Molded 

Urethane Teeth 

Now! Molded 

urethane teeth are 

available, upon 

request, on all 

4000-10 series Chief ® nozzles. 

This one piece molded urethane 

ring replaces the spinning teeth 

and metal retainer ring that come 

as standard. 

4000-14 1.5" Chief ® Nozzle Tip 

Same as 4000-10 except tip only • No twist shutoff • Also available with 150 GPM @ 75 

psi, 175 GPM @ 75 psi and 150 GPM @ 50 psi gallonage. 


4000-15 1.5" Chief ® Break-Apart Nozzle (Not Shown) 

Combination of 4000-14 and B-275A ball shutoff • 1.5" swivel base. 

4000-18 1.5" Chief ® Break-Apart Nozzle with Pistol Grip 

Combination of 4000-14 and B-275-GA ball shutoff • 1.5" free swivel base. 

4000-19 1.5" Chief ® Nozzle Tip (Not Shown) 

Same as 4000-14 except with twist shutoff • Available with 150 GPM @ 75 psi only. 

Additional 


on Page 92

“A Century of Fire Fighting Progress” 

chief ® Nozzles 

4000-16 Mid-Range Chief ® Nozzle 

Similar to 4000-10 except with larger ball shutoff for greater flows • 150 GPM standard 

• Optional low pressure gallonages available: 150 GPM @ 50 psi; 125 GPM @ 75 psi; 150 GPM 

@ 75 psi, and 175 GPM @ 75 psi • Horseshoe handle standard • 1.375" waterway • Tab 

handle optional • 1.5" swivel base • Finish hard anodized. 


4000-17 Mid-Range Chief ® Nozzle with Pistol Grip 

Same as 4000-16 except with rugged, 

Elk-O-Lite pistol grip and 1.5" free swivel base. 


250 GPM standard • 175, 325 and 350 GPM optional • Optional low pressure gallonages available: 250 GPM @ 

50 psi; 200 GPM @ 50 psi; 185 GPM @ 75 psi; 200 GPM @ 75 psi; 250 GPM @ 75 psi; and 300 GPM @ 75 psi 

• Horseshoe handle standard • 1.375" waterway • Tab handle optional 

• 1.5" swivel base • Finish hard anodized. 

4000-21 Mid-Range Chief ® Nozzle (Not Shown) 

Combination of 4000-24 tip and B-275-GA ball shutoff. 

4000-22 Mid-Range Chief ® Nozzle Tip (Not Shown) 

Same as 4000-24 except with twist shutoff • 1.5" base standard • Optional 2.5" base. 


Same as 4000-20 except with rugged cast Elk-O-Lite pistol grip and 1.5" 

free swivel base • Optional 2.5" free swivel base. 

4000-24 Mid-Range Chief ® Nozzle Tip 

Same as 4000-20 except tip only • No twist shutoff • 1.5" base standard • 

Optional 2.5" base. 

4000-25 Mid-Range Chief ® Break-Apart Nozzle (Not Shown) 

Combination of 4000-24 and B-275A ball shutoff. 

4000-31 Mid-Range Chief ® Break-Apart Nozzle with Pistol Grip 

Combination of 4000-22 tip and B-275-GAT ball shutoff. 

4000-35 Mid-Range Chief ® Break-Apart Nozzle (Not Shown) 

Combination of 4000-22 tip and B-275-AT ball shutoff. 

Hose Threads 

Flows @ 100 psi 

Wt. 

Model Size Base Tip GPM L/Min Length Lbs. 

4000-01 

4000-02 

4000-03 

4000-10 

4000-11 

4000-12 

4000-13 

4000-14 

4000-15 

4000-18 

4000-19 

1.0" 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.0" 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

— 

— 

— 

— 

— 

— 

— 

— 

1.5" 

1.5" 

— 

15, 30, 45 or 60 

15, 30, 45 or 60 

15, 30, 45 or 60 

60, 75, 95, 125 or 150 

60, 75, 95, 125 or 150 

60, 75, 95, 125 or 150 

60, 75, 95, 125 or 150 

60, 75, 95, 125 or 150 

60, 75, 95, 125 or 150 

60, 75, 95, 125 or 150 

60, 75, 95, 125 or 150 

57, 115, 170 or 225 

57, 115, 170 or 225 

57, 115, 170 or 225 

225, 284, 360, 475 or 568 

225, 284, 360, 475 or 568 

225, 284, 360, 475 or 568 

225, 284, 360, 475 or 568 

225, 284, 360, 475 or 568 

225, 284, 360, 475 or 568 

225, 284, 360, 475 or 568 

225, 284, 360, 475 or 568 

8.00" 

8.375" 

8.375" 

8.125" 

8.00" 

8.50" 

8.50" 

5.50" 

9.00" 

9.00" 

5.50" 

3.875 

4.25 

4.50 

4.375 

4.25 

4.375 

4.625 

1.875 

4.50 

5.00 

1.875 

Hose Threads Flows @ 100 psi 

Wt. 

Model Size Base Tip GPM L/Min Length Lbs. 

4000-16 

4000-17 

1.75" 

1.75" 

1.5" 

1.5" 

— 

— 

60, 75, 95, 125, or 150 225, 284, 360, 475 or 568 

60, 75, 95, 125, or 150 225, 284, 360, 475 or 568 

9.625" 

9.935" 

4.25 

4.813 

4000-20 1.75", 2.0" 

4000-21 1.75", 2.0" 

4000-22 1.75", 2.0" 

1.5" 

1.5" 

1.5" 

— 

1.5" 

— 

175, 250, 325 or 350 

175, 250, 325 or 350 

175, 250, 325 or 350 

660, 945, 1230 or 1325 

660, 945, 1230 or 1325 

660, 945, 1230 or 1325 

9.625" 

9.625" 

5.50" 

6.375 

6.75 

4.125 

4000-23 

4000-24 

4000-25 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

1.5" 

1.5" 

1.5" 

— 

— 

1.5" 

175, 250, 325 or 350 

175, 250, 325 or 350 

175, 250, 325 or 350 

660, 945, 1230 or 1325 

660, 945, 1230 or 1325 

660, 945, 1230 or 1325 

10.0" 

5.50" 

10.125" 

6.625 

4.125 

6.50 

4000-31 

4000-35 

1.75", 2.0" 

1.75", 2.0" 

1.5" 

1.5" 

1.5" 

1.5" 

175, 250, 325 or 350 

175, 250, 325 or 350 

660, 945, 1230 or 1325 

660, 945, 1230 or 1325 

10.125" 6.875 

10.625" 7.125 

Additional Flow Data on Pages 86 and 87. 

4000-24 

w/optional 

2.5" base 

CHIEF ® Nozzles

“A Century of Dependability” 


chief ® Nozzles 

4000-26 2.5" Chief ® Nozzle 

250 GPM standard • 175 and 325 GPM optional • Optional low pressure 

gallonages available: 250 GPM @ 50 psi; 185 GPM @ 75 psi; 200 GPM @ 75 psi; 

250 GPM @ 75 psi; and 300 GPM @ 75 psi • Horseshoe handle standard • Tab 

handle optional • 2.5" swivel base standard • 2.5" free swivel base optional • Finish 

hard anodized. 

Optional Nozzle Bases 

All Elkhart nozzles that are offered 

with free swivel bases are also 

available with the 65mm British 

Instantaneous Connector as well 

as either a 35mm or 65mm BSP 

threaded male for attaching Storz 

adaptors. Check with our sales desk for price and availability. 

4000-27 2.5" Chief ® Playpipe Combination 

Combination of 4000-24 (see page 7) with B-278-L playpipe • 2.5" free swivel base. 

chief ® … There’s Only One! 


Combination of 4000-20 (see page 7) with 279-LA playpipe • 2.5" rigid base. 


Same as 4000-26 except with rugged Elk-O-Lite pistol grip and 2.5" free 

swivel base. 


Combination of 4000-22 tip (see page 7) and DB-275-GAT ball shutoff • 2.5" free 

swivel base. 


Additional 


on Page 92 



4000-26 

4000-27 

4000-28 

4000-29 

4000-34 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

— 

1.5" 

— 

1.5" 

1.5" 

175, 250 or 325 

175, 250 or 325 

175, 250 or 325 

175, 250 or 325 

175, 250 or 325 

660, 945 or 1230 

660, 945 or 1230 

660, 945 or 1230 

660, 945 or 1230 

660, 945 or 1230 

13.50" 

17.50" 

13.50" 

20.125" 

14.75" 

6.75 

10.625 

7.00 

11.625 

7.375 

Additional Flow Data on Pages 86 and 87.


Low Pressure chief ® Nozzles 


Gallonage options: 125 @ 75 psi • If not specified, 95 @ 100 psi furnished • 1.0" 

waterway • See features and benefits on page 6. 


4000-13 1.5" Chief ® Nozzle with Pistol Grip (Not Shown) 

Same as 4000-10 except with rugged, Elk-O-Lite pistol grip and 1.5" free swivel base. 

4000-14 1.5" Chief ® Nozzle Tip (Not Shown) 

Same as 4000-10 except tip only • No twist shutoff • Also available with 150 GPM @ 75 

psi, 175 GPM @ 75 psi and 150 GPM @ 50 psi gallonage. 


Gallonage options: 125 @ 75 psi, 150 @ 75 psi, 175 @ 75 psi and 150 @ 50 psi • If not 

specified, 95 @ 100 psi furnished • 1.375" waterway • See features and benefits on page 6. 



4000-18 Mid-Range Chief ® Break-Apart Nozzle with Pistol Grip (Not Shown) 

Combination of 4000-14 and B-275-GA ball shutoff. 


Same as 4000-14 except with twist shutoff. • Available 150 @ 75 psi only. 


Gallonage options: 300 @ 75 psi, 250 @ 75 psi, 200 @ 75 psi, 185 @ 75 psi, 200 @ 

50 psi and 250 @ 50 psi • If not specified, 250 @ 100 psi furnished • 1.375" waterway • 

See features and benefits on page 6. 




Same as 4000-24 except with twist shutoff. 


Same as 4000-20 except tip only • No twist shutoff. 

4000-26 2.5" Chief ® Nozzle 

Gallonage options: 300 @ 75 psi, 250 @ 75 psi, 200 @ 75 psi, 185 @ 75 psi, 200 @ 50 psi and 

250 @ 50 psi • If not specified, 250 @ 100 psi furnished • See features and benefits on page 6. 


Combination of 4000-24 and B-278-L playpipe. 

4000-28 2.5" Chief ® Nozzle with Pistol Grip (Not Shown) 

Same as 4000-26 except with rugged Elk-O-Lite pistol grip and 2.5" free swivel base. 

4000-31 Chief ® Break-Apart Nozzle 

Combination of 4000-22 and B-275-GAT ball shutoff. 

4000-34 Chief ® Break-Apart Nozzle with Pistol Grip (Not Shown) 

Combination of 4000-22 and DB-275-GAT ball shutoff. 

4000-35 Chief ® Break-Apart Nozzle (Not Shown) 

Combination of 4000-22 and B-275-AT ball shutoff. 

For weights and dimensions refer to charts on pages 7 and 8. 

Flow Data on Page 87. 

CHIEF ® Nozzles

“A Century of Fire Fighting Progress” 

Select-O-Flow ® Nozzles 

Select-O-Flow ® 

Nozzles 

Features: 

• Constant/Select Gallonage 

• Durable Brass and Elk-O-Lite ® Construction 


• Constant Flow – Flush Feature 

• Adjustable, Teflon Impregnated Neoprene Seat 

• Rugged, Aluminum/Bronze Shutoff Handles 

• Hydraulically Balanced Acetal Ball 

• Double Handle Stops 

• Heavy-Duty Protective Rubber Bumper 

• Models to Fit All Handline Sizes 

Benefits: 




• Change Gallonage or Flush Without 

Shutting Down 

• Excellent for Application of AFFF 

• Same Flow-Straight Stream thru Wide Fog 


• Excellent for Use with Class A Foam 

• Choose From Four Gallonage Ranges 



SFS-O 1.0" Select-O-Flow ® Nozzle 

Rugged brass and Elk-O-Lite construction • Three flow settings; 10, 20 and 30 GPM plus 

flush • Tab handle standard • Horseshoe handle optional • 1.0" free swivel base standard 

• Rigid base optional • 1.0" waterway • Finish hard anodized with chrome plated trim. 

SFS-OG 1.0" Select-O-Flow ® Nozzle with Pistol Grip 

Same as SFS-O except with rugged Elk-O-Lite pistol grip. 

SFL-O 1.5" Select-O-Flow ® Nozzle 

Rugged brass and Elk-O-Lite construction • Four flow 

settings; 40, 60, 95 and 125 GPM plus flush • Horseshoe 

handle • 1.5" free swivel base standard • Rigid or free 

swivel base optional • 1.0" waterway • Finish hard anodized 

with chrome plated trim. 

SFL-OG 1.5" Select-O-Flow ® Nozzle with Pistol Grip 

Same as SFL-O except with rugged Elk-O-Lite pistol grip and 1.5" 

free swivel base. 

Optional Nozzle Bases 

All Elkhart nozzles that are 

offered with free swivel bases 

are also available with the 

65mm British Instantaneous 

Connector as well as either 

a 35mm or 65mm BSP 

threaded male for attaching 

Storz adaptors. Check with 

our sales desk for price 

and availability. 


TSFL-O 1.5" Select-O-Flow ® Nozzle Tip (Not Shown) 

Same as SFL-O except tip only • Twist shutoff. 

STSFL-O 1.5" Select-O-Flow ® Break-Apart Nozzle (Not Shown) 

Combination of TSFL-O tip and LB-275A ball shutoff. 

SFL-B 1.5" Select-O-Flow ® Nozzle 

Rugged all brass construction • For industrial and marine application • Four flow settings; 

40, 60, 95 and 125 GPM plus flush • 1.0" waterway • Replaceable spinning teeth standard 

• Molded urethane teeth optional • Horseshoe handle • 1.5" swivel base • Finish satin brass. 

SFL-BG 1.5" Select-O-Flow ® Nozzle with Pistol Grip 

Same as SFL-B except with rugged brass pistol grip and 1.5" free swivel base. 

SFL-N 1.5" Select-O-Flow ® Nozzle (Not Shown) 

See page 77. 

Additional 


on Page 92



SFM Mid-Range Select-O-Flow ® Nozzle 

Durable, lightweight Elk-O-Lite construction • Five flow settings; 95, 125, 150, 

175 and 200 GPM plus flush • 1.375" waterway • Replaceable spinning teeth 

• Horseshoe handle • 1.5" swivel base • Finish hard anodized. 

SFM-G Mid-Range Select-O-Flow ® Nozzle with Pistol Grip 

Same as SFM except with rugged Elk-O-Lite pistol grip and 1.5" free 

swivel base • 2.5" free swivel base optional. 

TSFM Mid-Range Select-O-Flow ® Nozzle Tip (Not Shown) 

Same as SFM except tip only • No twist shutoff. 


STSFM Mid-Range Select-O-Flow ® Break-Apart Nozzle 

(Not Shown) 

Combination of TSFM tip and B-275A ball shutoff. 

SF 2.5" Select-O-Flow ® Nozzle 

Rugged brass and Elk-O-Lite construction • Three flow settings; 125, 175 and 250 GPM plus flush • Horseshoe 

handle • 1.5" swivel base standard • Rigid or free swivel base optional • 1.375" waterway • For 

use with a playpipe or a direct connect adapter • Finish chrome plated with hard anodized trim. 

SF-G 2.5" Select-O-Flow ® Nozzle with Pistol Grip (Not Shown) 

Same as SF except with rugged Elk-O-Lite pistol grip and 1.5" free swivel base. 

DSF 2.5" Select-O-Flow ® Nozzle for Direct Connect 

Same as SF except with 2.5" swivel base • Rigid or free swivel base optional. 

DSF-G 2.5" Select-O-Flow ® Nozzle for Direct Connect with Pistol Grip 

(Not Shown) 

Same as DSF except with rugged Elk-O-Lite pistol grip and free swivel base. 

TSF 2.5" Select-O-Flow ® Nozzle Tip (Not Shown) 

Same as SF except tip only • Twist shutoff. 

STDSF 2.5" Select-O-Flow ® Break-Apart Nozzle (Not Shown) 

Combination of TSF tip and DB-275A ball shutoff. 

SF-800 2.5" Select-O-Flow ® Playpipe Combination (Not Shown) 

Combination of SF nozzle and 279-L playpipe. 

Additional 


on Page 92 

STSFB-800A 2.5" Select-O-Flow ® Playpipe Combination 

Combination of TSF tip and B-278-L playpipe. 



SFS-O 

SFS-OG 

SFL-O 

SFL-OG 

TSFL-O 

STSFL-O 

SFL-B 

SFL-BG 

SFL-N 

SFM 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.75" 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

— 

— 

— 

— 

— 

1.5" 

— 

— 

— 

— 

10-20-30 

10-20-30 

40-60-95-125 

40-60-95-125 

40-60-95-125 

40-60-95-125 

40-60-95-125 

40-60-95-125 

95 or 125 

95-125-150-175-200 

38-75-115 

38-75-115 

150-225-360-475 

150-225-360-475 

150-225-360-475 

150-225-360-475 

150-225-360-475 

150-225-360-475 

360 or 475 

360-475-570-660-760 

7.00" 

10.00" 

7.00" 

10.00" 

6.50" 

10.75" 

7.625" 

8.375" 

7.00" 

9.125" 

3.625 

4.75 

3.75 

4.875 

2.75 

6.625 

7.75 

9.625 

6.50 

4.75 

SFM-G 1.75" 1.5" — 95-125-150-175-200 360-475-570-660-760 9.50" 5.00 



TSFM 

STSFM 

SF 

SF-G 

TSF 

DSF 

DSF-G 

STDSF 

SF-800 

STSFB-800A 

1.75" 

1.75" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

— 

1.5" 

— 

— 

— 

— 

— 

1.5" 

1.5" 

1.5" 

95-125-150-175-200 

95-125-150-175-200 

125-175-250 

125-175-250 

125-175-250 

125-175-250 

125-175-250 

125-175-250 

125-175-250 

125-175-250 

360-475-570-660-760 

360-475-570-660-760 

475-660-945 

475-660-945 

475-660-945 

475-660-945 

475-660-945 

475-660-945 

475-660-945 

475-660-945 

6.75" 

10.75" 

8.00" 

11.25" 

7.00" 

10.75" 

13.875" 

13.50" 

18.75" 

17.25" 

2.875 

5.125 

8.00 

8.875 

5.50 

10.00 

10.875 

11.125 

20.75 

11.50 

Additional Flow Data on Pages 82 and 83. 

Select-O-Flow ® Nozzles


Low Pressure Nozzles 

Low Pressure Mystery Nozzles 

Constructed of durable, lightweight Elk-O-Lite with a heavy-duty protective EPDM bumper, 

these nozzles are ideal for Hi-Rise or ground level operations. Like all mystery nozzles, these 

feature excellent stream quality from full wide fog to a tight straight stream, with the capability 

of twisting the nozzle tip to complete shutoff. Any of these nozzles can be used with Elkhart’s 

lightweight Elk-O-Lite ball shutoffs to make a variety of break-apart combinations. Many low 

pressure flows are available. 

L-205-BA 1.5" or Mid-Range Mystery Nozzle Tip 

Durable, lightweight Elk-O-Lite construction • Base threads 1.5" • Twist shutoff • Finish hard anodized 

• Length, 4.625" • Weight, 1.375 lbs. 

Gallonage Options (please specify) 

125 @ 75 psi 95 @ 100 psi 

60 @ 100 psi 125 @ 100 psi 

If not specified, 125 @ 75 furnished 

Additional Flow Data 

on Pages 80 and 81 

LB-275-AF 1.5" or Mid-Range Mystery Break-Apart Nozzle 

This is the combination used by the Dallas FD and Phoenix FD • L-205-BA with LB-275A ball shutoff 

(see page 22) • Length, 8.50" • Weight, 3.50 lbs. 

205-BA Mid-Range or 2.5" Mystery Nozzle Tip 

This is the nozzle referred to as the LA Tip • Durable, lightweight Elk-O-Lite construction • 

Twist shutoff • Optional without twist shutoff • Base threads 1.5" • Finish hard anodized • 

Length, 7.125" • Weight, 3.25 lbs. 

Gallonage Options (please specify) 

200 @ 50 psi 170 @ 100 psi 

200 @ 75 psi 250 @ 100 psi 

125 @ 75 psi 

If not specified, 125 @ 75 furnished 

Additional 


on Page 92 

D-205-BA Mid-Range or 2.5" Mystery Nozzle Tip (Not Shown) 

Same as 205-BA except 2.5" base • Length, 7.50" • Weight, 3.50 lbs. 

B-275-ATF Mid-Range Mystery Break-Apart Nozzle (Not Shown) 

Combination of 205-BA and B-275AT ball shutoff (see page 22) • Length, 12.875" • Weight, 6.25 lbs. 

B-275-GATF Mid-Range Mystery Break-Apart Nozzle with Pistol Grip 

Combination of 205-BA and B-275GAT ball shutoff (see page 22) • Length, 13.25" • Weight, 6.75 lbs. 


B-275-TAF Mid-Range Mystery Break-Apart Nozzle (Not Shown) 

This is the combination used by the St. Louis Fire Department • Combination of L-205-BA, 186A 

smooth bore tip, and B-275A ball shutoff (see page 22) • Length, 11.375" • Weight, 4.375 lbs. 

JB-275-LAFD 2.5" Mystery Break-Apart Nozzle 

This is a combination used by the Los Angeles FD • D-205BA with JB-275A ball shutoff (see page 

22) • Length, 13.625" • Weight, 7.50 lbs.


Low Pressure chief ® Nozzles 

The chief ® nozzle series offers a large selection of sizes and models with low pressure 

flows. Here are a few of our most popular models. See the complete line of low pressure 

chief ® nozzles on page 9. 


See features and benefits on page 6; available gallonages on page 7. 


4000-17 Mid-Range Chief ® Nozzle with Pistol Grip (Not Shown) 


4000-18 Mid-Range Chief ® Break-Apart Nozzle with Pistol Grip 




4000-23 Mid-Range Chief ® Nozzle with Pistol Grip (Not Shown) 


4000-31 Mid-Range Chief ® Break-Apart Nozzle with Pistol Grip (Not Shown) 




Low Pressure Select-O-Matic ® Nozzles 

The Select-O-Matic ® nozzle series offers a large selection of sizes and models for low pressure flows. 

These nozzles achieve their flow range at 25 psi less than standard Select-O-Matics ® . Here are a few of 

our most popular models. See the complete line of low pressure Select-O-Matic ® nozzles on page 5. 

SM-20FLP Mid-Range Select-O-Matic ® Low Pressure Nozzle 

See features and benefits on page 2; flow range on page 5. 

SM-20FGLP Mid-Range Select-O-Matic ® Low Pressure Nozzle 



60 to 200 GPM 

STSM-20FGATLP Mid-Range Select-O-Matic ® Low Pressure 

Break-Apart Nozzle with Pistol Grip 


SM-30FLP Mid-Range Select-O-Matic ® Low Pressure Nozzle 


SM-30FGLP Mid-Range Select-O-Matic ® Low Pressure Nozzle 



STSM-30FGATLP Mid-Range Select-O-Matic ® Low Pressure 

Break-Apart Nozzle with Pistol Grip 


75 to 325 GPM 

Low Pressure Nozzles


Ball Shutoffs and Playpipes 

Elk-O-Lite ® Ball Shutoffs 

SB-275A 1.0" Elk-O-Lite ® Ball Shutoff 

Durable, lightweight Elk-O-Lite construction • Rugged aluminum bronze shutoff 

handle with double stops • Adjustable, teflon impregnated neoprene seat with 

hydraulically balanced acetal ball • 1.0" waterway • Tab handle standard • Horseshoe 

handle optional • 1.0" free swivel base standard • Rigid base optional • 1.0" male 

outlet • Finish hard anodized. 

SB-275-GA 1.0" Elk-O-Lite ® Ball Shutoff with Pistol Grip (Not Shown) 

Same as SB-275A except with rugged Elk-O-Lite pistol grip. 

LB-275A 1.5" Elk-O-Lite ® Ball Shutoff 



hydraulically balanced acetal ball • 1.0" waterway • Horseshoe handle • 1.5" swivel base standard 

• Free swivel or rigid base optional • 1.5" male outlet • Finish hard anodized. 

LB-275-GA Mid-Range Elk-O-Lite ® Ball Shutoff 

Same as LB-275A except with cast Elk-O-Lite pistol grip and free swivel base. 

B-275A Mid-Range Elk-O-Lite ® Ball Shutoff 



hydraulically balanced acetal ball • 1.375" waterway • Horseshoe handle • 1.5" swivel 

base standard • Free swivel or rigid base optional • 1.5" male outlet • Finish hard anodized. 

B-275-AT Mid-Range Elk-O-Lite ® Ball Shutoff 

Same as B-275A except with a built-in smooth bore tip, dual-drive ball, and UHMWPE 

seat for improved stream quality • Available in .875", .937", 1.00", 1.125" or 1.250" discharge 

(Please specify). 

B-275-GA Mid-Range Elk-O-Lite ® Ball Shutoff with Pistol Grip (Not Shown) 

Same as B-275A except with rugged Elk-O-Lite pistol grip and free swivel base. 

B-275-GAT Mid-Range Elk-O-Lite ® Ball Shutoff with Pistol Grip 

Same as B-275-AT except with rugged Elk-O-Lite pistol grip and free swivel base. 

DB-275A 2.5" Elk-O-Lite ® Ball Shutoff 

Additional 


on Page 92 

Durable, lightweight Elk-O-Lite construction • Rugged aluminum bronze shutoff handle with double 

stops • Adjustable, teflon impregnated neoprene seat with hydraulically balanced acetal ball • 1.375" 

waterway • Horseshoe handle • 2.5" swivel base standard • Free swivel or rigid base optional • 1.5" 

male outlet • Finish hard anodized. 

DB-275AT 2.5" Elk-O-Lite ® Ball Shutoff with Integral Smooth Bore Tip (Not Shown) 

Same as DB-275A except with built-in smooth bore tip, dual-drive ball, and UHMWPE seat for improved 

stream quality • Available in .875", .937", 1.00", 1.125", and 1.250" discharge (Please specify). 


DB-275-GA 2.5" Elk-O-Lite ® Ball Shutoff with Pistol Grip (Not Shown) 

Same as DB-275A except with rugged Elk-O-Lite pistol grip and free swivel base. 

DB-275-GAT 2.5" Elk-O-Lite ® Ball Shutoff with Pistol Grip 

Same as DB-275AT except with rugged Elk-O-Lite pistol grip and free swivel base. 

JB-275A Elk-O-Lite ® “Jumbo” Ball Shutoff 

Durable, lightweight Elk-O-Lite construction • Rugged aluminum bronze shutoff handle with double 

stops • Adjustable, teflon impregnated neoprene seat with hydraulically balanced Elk-O-Lite ball 

• 1.75" waterway • Heavy-duty Jumbo horseshoe handle • 2.5" free swivel base • 2.5" male outlet 

• Available with rugged Elk-O-Lite pistol grip (JB-275-GA) • Finish hard anodized.


Brass Ball Shutoffs 

LB-275 1.5" Brass Ball Shutoff 

Rugged brass construction • Durable manganese bronze shutoff handle with double stops 

• Adjustable, teflon impregnated neoprene seat with hydraulically balanced acetal ball 

• 1.0" waterway • Horseshoe handle • 1.5" swivel base standard • Free swivel or rigid 

base optional • 1.5" male outlet • Finish satin brass or chrome plated. 

B-275 Mid-Range Brass Ball Shutoff 

Same as LB-275 except slightly larger with 1.375" waterway. 

DB-275 2.5" Brass Ball Shutoff (Not Shown) 

Same as B-275 except with 2.5" base. 


JB-275 Brass “Jumbo” Ball Shutoff (Not Shown) 

Similar to JB-275A except rugged brass construction and rigid base. 

Playpipes 

B-278 Elk-O-Lite ® Playpipe with Integral Ball Shutoff 

Durable, lightweight Elk-O-Lite construction • Compact design • Rugged aluminum bronze 

shutoff handle with double stops • Adjustable, teflon impregnated neoprene seat with 

hydraulically balanced acetal ball • 1.375" waterway • Horseshoe handle • 2.5" free 

swivel base • 1.5" male outlet • Solid “D” handles vinyl coated • Finish hard anodized. 

B-278-L Elk-O-Lite ® Playpipe with Integral Ball Shutoff and Ladder Hook 

(Not Shown) 

Same as B-278 except with ladder hook. 

279-L Brass Playpipe with Ladder Hook 

Rugged, cast brass construction • Ladder hook • Steel reinforced rubber handles 

• 2.5" rigid base with free swiveling handles • 1.5" male outlet • Finish satin brass 

or chrome plated. 

279-LA Elk-O-Lite ® Playpipe with Ladder Hook 

Durable, lightweight Elk-O-Lite construction • Ladder hook • 2.5" free swivel base 

• 1.5" male outlet • Solid “D” handles vinyl coated • Finish hard anodized. 

B-877A Elk-O-Lite ® Playpipe Combination with Triple Stacked Tips 

Combination of B-278 playpipe and ST-190-BA triple stacked smooth bore tips. 

Thread Sizes Waterway 

Model Hose Size Base Tip Size Length Wt. Lbs. 

SB-275A 

SB-275-GA 

LB-275A 

LB-275-GA 

LB-275 

B-275A 

B-275AT 

B-275-GA 

B-275-GAT 

B-275 

DB-275A 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

1.75", 2.0" 

2.5" 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

2.5" 

1.0" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.0" 

1.0" 

1.0" 

1.0" 

1.0" 

1.375" 

1.375" 

1.375" 

1.375" 

1.375" 

1.375" 

4.125" 

4.125" 

4.375" 

4.75" 

4.375" 

4.875" 

6.125" 

5.25" 

6.125" 

4.875" 

8.25" 

1.75 

2.25 

1.875 

2.375 

3.875 

2.25 

2.875 

2.75 

3.375 

4.75 

3.00 

Thread Sizes Waterway 

Model Hose Size Base Tip Size Length Wt. Lbs. 

DB-275-AT 

DB-275-GA 

DB-275-GAT 

DB-275 

JB-275A 

JB-275 

B-278 

B-278-L 

279-LA 

279-L 

B-877A 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

1.5" 

1.5" 

1.5" 

1.5" 

2.5" 

2.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.375" 

1.375" 

1.375" 

1.375" 

1.75" 

1.75" 

1.375" 

1.375" 

1.50" 

1.50" 

1.375" 

9.25" 

8.25" 

9.25" 

8.25" 

6.93" 

6.875" 

11.0" 

11.0" 

10.875" 

10.875" 

19.0" 

3.625 

3.50 

4.125 

7.50 

4.75 

8.50 

6.125 

6.375 

5.75 

11.125 

7.875 

Ball Shutoffs and Playpipes


Smooth Bore Tips 

Handline Tips 

185-A Elk-O-Lite ® Handline Tip 

1.5" base threads • 1.5" top threads • See chart for discharge sizes. 

185-B Brass Handline Tip 

1.5" base threads • See chart for discharge sizes • Satin brass or chrome plated. 

ST-185A Elk-O-Lite ® Double Stacked Handline Tips 

The FDNY stack • 1.5" base threads • See chart for discharge sizes. 

ST-185AIFD Elk-O-Lite ® Double Stacked Handline Tips 

The Indy stack • 1.5" base threads • See chart for discharge sizes. 

186A Elk-O-Lite ® Handline “Slug” Tip 

1.5" base threads • 1.5" top threads • See chart for discharge sizes. 

187A Elk-O-Lite ® Handline Tip 

1.5" base threads • See chart for discharge sizes. 

ST-190-B Brass Triple Stacked Handline Tips (Not Shown) 

1.5" base threads • See chart for discharge sizes • Chrome plated. 

ST-190-BA Elk-O-Lite ® Triple Stacked Handline Tips 


Deluge Tips 

181 Brass Deluge Tip 


181-3A Elk-O-Lite ® Deluge Tip 

Built-in stream shaper • 3.5" base threads • See chart for discharge sizes. 

181-3 Brass Deluge Tip (Not Shown) 


187CAF Elk-O-Lite ® CAF Deluge Tip 

For applying CAF with deck gun • Use with 281A stream shaper • See chart for discharge sizes. 

ST-194 Elk-O-Lite ® Quad Stacked Deluge Tips 


ST-195 Elk-O-Lite ® Triple Stacked Deluge Tips 


Smooth Bore Tips 

Thread Sizes 

Discharge 

Model Base Middle Tip Standard Optional Length Wt. Lbs. 

181 

181-3 

181-3A 

185-A 

185-B 

ST-185A 

ST-185AIFD 

2.5" 

3.5" 

3.5" 

1.5" 

1.5" 

1.5" 

1.5" 

— 

— 

— 

— 

— 

— 

1.5" 

— 

— 

— 

1.5" 

— 

— 

— 

1 1 /2" 

2 1 /2" 

3" 

15 

/16" 

1 

/2",1 1 /8" 

1 

/2", 15 /16" 

1 1 /8", 1 1 /4" 

1"- 2 1 /4" 

2"- 2 1 /4" 

— 

7 

/8",1",1 1 /8", 

5 

/8", 1 1 /4" 

1 

/2", 1 1 /8" 

— 

9.00" 

9.00" 

12.00" 

4.75" 

4.50" 

6.625" 

7.625" 

3.625 

7.125 

4.00 

1.0 

1.50 

.688 

.875 

Thread Sizes 

Discharge 

Model Base Middle Tip Standard Optional Length Wt. Lbs. 

186A 

187A 

ST-190-B 

ST-190-BA 

187CAF 

ST-194 

ST-195 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

2.5" 

3.5" 

— 

— 

1.5" 

1.5" 

— 

2.0", 2.25" 

2.5" 

1.5" 

— 

1.25" 

1.25" 

— 

1.5" 

2.5" 

7 

/8" 

15 

/16" 

1", 1 1 /8", 1 1 /4" 

1", 1 1 /8", 1 1 /4" 

1 3 /8" 

1 3 /8", 1 1 /2", 1 3 /4", 2" 

2", 2 1 /4", 2 1 /2" 

15 

/16", 1" 

7 

/8", 1", 1 1 /8" 

3 

/4", 1", 1 1 /8" 

— 

— 

— 

— 

2.625" 

4.50" 

9.00" 

9.00" 

10.00" 

12.875" 

16.75" 

.75 

.563 

4.375 

1.125 

.68 

2.125 

4.00


Cellar/Distributor Nozzles 

LR 1.5" Cellar Nozzle 

Flows 115 GPM @ 100 psi (435 L/min @ 700 Kpa) • Coverage, 20' diameter • 1.5" female 

base • Finish chrome plated • Length, 5.00" • Weight, 4.25 Lbs. 

R 2.5" Cellar Nozzle (Not Shown) 



193-6 1.5" Bresnan Distributor Nozzle 



193-6 2.5" Bresnan Distributor Nozzle (Not Shown) 

Flows 275 GPM @ 50 psi (1030 L/min @ 350 Kpa) • Coverage, 45' diameter 

• 2.5" female base • Finish chrome plated • Length, 6.25" • Weight, 7.50 Lbs. 

193-9 2.5" Bresnan Distributor Nozzle 


on Page 84 

Flows 340 GPM @ 50 psi (1290 L/min @ 350 Kpa) • Coverage, 36' diameter • 2.5" female base • Finish chrome 

plated • Length, 6.25" • Weight, 7.50 Lbs. 

Select-O-Stream ® and Cellar Nozzles 

A-1.5" Applicator for Cellar/Bresnan Nozzle (Not Shown) 

1.5" free swivel inlet • 1.5" NHT male outlet • Integral ball shutoff 

• Finish chrome plated • Length, 24.50" • Weight, 8.25 Lbs. 

A-2.5" Applicator for Cellar/Bresnan Nozzle (Not Shown) 

2.5" swivel inlet • 2.5" NHT male outlet • Finish red acrylic/urethane 

enamel with hard anodized trim • Length, 25.00" • Weight, 5.75 Lbs. 

Select-O-Stream ® Handline Nozzles 

S-O 1.0" Select-O-Stream ® Nozzle (Not Shown) 

Rugged brass construction • Constant gallonage • Durable manganese bronze shutoff handle with double stops 

• Adjustable, teflon impregnated neoprene seat with hydraulically balanced acetal ball • 23 GPM standard • 12 

GPM optional • Tab handle standard • Horseshoe handle optional • Free swivel base standard • Rigid base 

optional • Finish chrome plated • Length, 6.75" • Weight, 5.375 Lbs. 

S-OG 1.0" Select-O-Stream ® Nozzle with Pistol Grip 

Same as S-O except with rugged cast brass pistol grip • Length, 7.50" • Weight, 6.25 Lbs. 

L-O 1.5" Select-O-Stream ® Nozzle 

Rugged brass construction • Constant gallonage • Durable manganese bronze shutoff handle with double 

stops • Adjustable, teflon impregnated neoprene seat with hydraulically balanced acetal ball 95 GPM 

standard • 60 and 125 GPM optional • Horseshoe handle • Swivel base standard • Free swivel or rigid 

base optional • Finish chrome plated or satin brass • Length, 7.00" • Weight, 5.50 Lbs. 

L-OG 1.5" Select-O-Stream ® Nozzle with Pistol Grip (Not Shown) 

Same as L-O except with cast brass pistol grip and free swivel base • Length, 7.75" • Weight, 6.375 Lbs. 

D 2.5" Select-O-Stream ® Nozzle For Direct Connect 

Same as SOS except with 2.5" base • Length, 10.625" • Weight, 10.375 Lbs. 

SOS 2.5" Select-O-Stream ® Nozzle (Not Shown) 

Rugged brass construction • Basic gallonage • Durable manganese bronze shutoff 

handle with single stops • Adjustable, teflon impregnated neoprene seat with 

hydraulically balanced acetal ball • 170 GPM standard • 250 GPM optional • Horseshoe handle • 1.5" swivel base 

standard • Free swivel or rigid base optional • Finish chrome plated or satin brass • Length, 8.00" • Weight, 8.00 Lbs. 

800-SOS 2.5" Select-O-Stream ® Playpipe Combination 

Combination of SOS nozzle and 279-L playpipe • Length, 18.25" • Weight, 18.00 Lbs. 


on Pages 82 & 83 

Select-O-Stream ® and Cellar Nozzles


Select-O-Matic ® Master Stream Nozzles 

Features: 

• The Original “THINKING” Nozzle 

• Automatically Adjusts to Fluctuating Flows 

• Maintains Effective Stream 

• Maintains Sufficient Pressure 


• Constant Flow 

• Rugged, Stainless Steel Mechanism 

• Heavy-duty Rubber Bumper 

• Three Flow Ranges / 300 to 1000 GPM, 

300 to 1250 GPM, and 500 to 2000 GPM 

• Optional Inlet Sizes 

Nozzles 

SM-1000 Select-O-Matic ® Master Stream Nozzle 

Benefits: 


• Simplifies Fire Ground Hydraulics 

• Excellent Stream Quality 

• Change Patterns Easily 

• Flow Remains Same Throughout 

Pattern Selection 

• Easy to Work With–Easy to Train With 

• Excellent for AFFF Application 

• Ideal for Portable Monitors, Deck Guns, 

or Elevated Platforms 


Flows from 300 to 1000 GPM • Operates at 75 psi rather than 100 psi • Automatically adjusts to 

maintain effective pressure and efficient stream within this flow range • Stream pattern easily 

changed with large control handles • 2.5" swivel base standard • 3.5" swivel base optional • Finish 


SM-1000E Select-O-Matic ® Master Stream Nozzle (Not Shown) 

Same as SM-1000 except stream pattern is controlled by an electric motor • Motor is completely 

encased for protection from elements • Available 12V or 24V (please specify) • Manual override in 

case of power failure • 2.5" swivel base standard • 3.5" swivel base optional • Finish hard anodized. 

SM-1000H Select-O-Matic ® Master Stream Nozzle 

Same as SM-1000 except except stream pattern is controlled with a hydraulic piston. 


SM-100F Select-O-Matic ® Master Stream Foam Nozzle 

Flows from 300 to 1000 GPM • Operates at 100 psi • Automatically adjusts to maintain effective 

pressure and efficient stream within this range • Foam aeration tube can be attached or detached 

in seconds • Expansion ratios of up to 8.5 to 1 • Two foam nozzles in one...aspirating and nonaspirating 

• 2.5" swivel base standard • 3.5" swivel base optional • Foam tube available as Retro-Kit 

for existing SM-100 nozzles (see page 43) • Finish hard anodized with polished tube. 

Nozzles 



maintain effective pressure and efficient stream within this flow range • Stream pattern easily 

changed with large control handles • 2.5" swivel base standard • 3.5" swivel base optional • Finish 


SM-1250B Select-O-Matic ® Master Stream Nozzle (Not Shown) 

Same as SM-1250 except brass construction (see page 73). 

Additional 


on Page 93

Select-O-Matic ® …The Industry Leader in Automatic Nozzles! 

SM-1250E Select-O-Matic ® Master Stream Nozzle 

Same as SM-1250 except stream pattern is controlled by an electric motor • 

Motor is completely encased for protection from elements • Available 12V or 

24V (please specify) • Manual override in case of power failure • 2.5" swivel 

base standard • 3.5" swivel base optional • Finish hard anodized. 

SM-1250H Select-O-Matic ® Master Stream Nozzle 

Same as SM-1250 except stream pattern is controlled with hydraulic piston for remote operation • 

2.5" swivel base standard • 3.5" swivel base optional • Finish hard anodized. 

SM-1250HB Select-O-Matic ® Master Stream Nozzle (Not Shown) 

Same as SM-1250H except brass construction (see page 73). 

Nozzles 

Additional 


on Page 93 


SM-2000 Select-O-Matic ® Master Stream Nozzle...the 


maintain effective pressure and efficient stream within this flow range • Flow efficient hydrodynamic 

vanes and hub • Stream pattern easily changed with large control handles • 3.5" swivel base • 

• 2.5" swivel base optional • Finish hard anodized. 

SM-2000B Select-O-Matic ® Master Stream Nozzle...the 

Same as SM-2000 except brass construction (see page 73). 

SM-2000E Select-O-Matic ® Master Stream Nozzle...the 

Same as SM-2000 except stream pattern is controlled by an electric motor • Motor is completely 

encased for protection from elements • Available 12V or 24V (please specify) • Manual override in 

case of power failure • 3.5" swivel base • 2.5" swivel base optional • Finish hard anodized. 

Flow 

Model Size Threads GPM L/Min Length Wt. Lbs. 

SM-1000 

SM-1000E 

SM-1000H 

SM-100F 

SM-1250 

SM-1250B 

Master Stream 

Master Stream 

Master Stream 

Master Stream 

Master Stream 

Master Stream 

2.5" or 3.5" 

2.5" or 3.5" 

2.5" or 3.5" 

2.5" or 3.5" 

2.5" or 3.5" 

2.5" or 3.5" 

300-1000 

300-1000 

300-1000 

300-1000 

300-1250 

300-1250 

1135-3785 

1135-3785 

1135-3785 

1135-3785 

1135-4730 

1135-4730 

7.875" 

7.875" 

7.875" 

7.875" 

7.875" 

7.875" 

7.50 

9.00 

8.25 

14.25 

7.50 

31.50 

(Not Shown) 

Flow 

Model Size Threads GPM L/Min Length Wt. Lbs. 

SM-1250E 

SM-1250H 

Master Stream 

Master Stream 

2.5" or 3.5" 

2.5" or 3.5" 

300-1250 

300-1250 

1135-4730 

1135-4730 

7.875" 

7.875" 

9.00 

8.25 

SM-1250HB Master Stream 2.5" or 3.5" 300-1250 1135-4730 7.875" 32.25 

SM-2000 

SM-2000E 

Master Stream 

Master Stream 

2.5" or 3.5" 

2.5" or 3.5" 

500-2000 

500-2000 

1892-7570 

1892-7570 

8.875" 

8.875" 

9.20 

10.40 

Select-O-Matic ® Master Stream Nozzles


Master Stream Nozzles 

Select-O-Stream ® Master Stream Nozzles 

CJ Elk-O-Lite ® Master Stream Nozzle 

Durable, lightweight Elk-O-Lite construction • Single 

gallonage/constant flow • Excellent straight stream 

quality • Pattern easily changed under flowing conditions • 

Does not shut off • Excellent for AFFF application • Ideal for 

use on portable monitors, deck guns, elevated platforms, etc. 

• 500 GPM standard • 350 GPM optional • 2.5" swivel base 

• Finish hard anodized with chrome plated trim. 

CJ-B Brass Master Stream Nozzle (See Page 72) 

CJ-RC Elk-O-Lite ® Master Stream Nozzle 

Same as CJ except stream pattern is controlled by cables for remote operation. 

CJ-B-RC Brass Master Stream Nozzle (See Page 72) 

CJN Elk-O-Lite ® Master Stream Nozzle 

Similar to CJ except slightly larger for greater flows 

• 1000 GPM standard • 750 GPM optional • 2.5" swivel base 

• Finish hard anodized with chrome plated trim. 

CJN-B Brass Master Stream Nozzle (See Page 72) 

Additional 


on Page 93 

CJN-RC Elk-O-Lite ® Master Stream Nozzle (Not Shown) 

Same as CJN except stream pattern is controlled by cables for remote operation. 

CJN-B-RC Brass Master Stream Nozzle (See Page 72) 

Select-O-Flow ® Master Stream Nozzles 

CSW Elk-O-Lite ® Master Stream Nozzle 

Durable, lightweight Elk-O-Lite construction • Constant flow/select gallonage: 300, 550, and 750 

GPM settings • Excellent straight stream quality • Pattern easily changed under flowing conditions • 

Excellent for AFFF application • Gallonage easily changed under flowing conditions (even down to 

shutoff position) • Ideal for use on portable monitors, deck guns, elevated platforms, etc. • 2.5" 

swivel base • Finish hard anodized with chrome plated trim. 

CSW-L Elk-O-Lite ® Master Stream Nozzle 

Durable, lightweight Elk-O-Lite construction • Constant flow/select gallonage: 350, 500, 750, 1000, 

and 1250 GPM settings • Excellent straight stream quality • Pattern easily changed under flowing 

conditions • Excellent for AFFF application • Gallonage easily changed under flowing conditions 

(even down to shutoff position) • Ideal for use on portable monitors, deck guns, elevated 

platforms, etc. • 2.5" swivel base • Finish hard anodized with chrome plated trim. 

Master Stream Nozzles 

Flow @ 100 psi 

Model Threads GPM L/Min Length Wt. Lbs. 

CJ 

CJ-B 

CJN 

CJN-B 

CJ-RC 

CJ-B-RC 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

2.5" 

350 or 500 

350 or 500 

750 or 1000 

750 or 1000 

350 or 500 

350 or 500 

1325 or 1895 

1325 or 1895 

2840 or 3785 

2840 or 3785 

1325 or 1895 

1325 or 1895 

6.50" 

6.50" 

7.50" 

7.50" 

6.50" 

6.50" 

5.50 

12.375 

6.50 

15.625 

7.25 

14.50 

CSW-LB Brass Master Stream Nozzle (See Page 72) 


Model Threads GPM L/Min Length Wt. Lbs. 

CJN-RC 2.5" 750 or 1000 

2840 or 3785 7.50" 8.50 

CJN-B-RC 2.5" 750 or 1000 

2840 or 3785 7.50" 17.75 

CSW 2.5" 300-550-750 

1135-2080-2840 7.625" 7.625 

CSW-L 2.5" 350-500-750-1000-1250 1325-1892-2040-3785-4730 8.875" 10.00 

CSW-LB 2.5" 350-500-750-1000-1250 1325-1892-2840-3785-4730 8.875" 21.375 

Additional Flow Data on Page 84.


The Hydro-Foam ® Story 

The Hydro-Foam nozzle was conceived, designed, developed and field tested by professional firefighters for 

use by firefighters. Since its introduction to the fire service 20 years ago, it has been used successfully to 

extinguish many flammable liquid fires in storage tanks, on barges, at loading terminals, in refineries and 

chemical plants, on offshore rigs and highway spills. The UL Listed Hydro-Foam nozzle has proven itself time 

after time on the fireground worldwide. 

This remarkable master stream nozzle has its own built-in foam eductor, so it can be used for an everyday 

water application nozzle with the capability of instantly becoming a foam nozzle when needed. By simply 

attaching the Hydro-Foam to your existing fixed or portable monitor, you have an instant foam station. By 

attaching one to the deck gun on your pumper, you have foam capabilities similar to a crash truck. The 

Hydro-Foam is ideal for those situations where greater application rates are necessary for containment and/or 

extinguishment of large spills when using AFFF; or for containment and/or extinguishment of structure fires 

when using Class A foam. 

Hydro-Foam 

in Action 

The Hydro-Foam is available in two gallonages. The HF-350 is 

pre-set for 3% proportioning and can be easily changed in the 

field to either 6%, 1% or 1/2%. The HF-500 is also pre-set at 

3% and can be changed to 1% or 1/2%. These nozzles are 

constructed of rugged brass alloys making them impervious 

to corrosion. 

Hydro-Foam ® Nozzles 

HF-350 Hydro-Foam ® Master Stream Nozzle 

Constant gallonage 350 GPM (1325 L/min) • 1/2, 1, 3 and 6% proportioning 

• Clear vinyl pick-up hose (9 ft.) • Optional quick connect coupling • Optional 

3% / 6% valve • Optional foam shutoff valve • Optional Drum pick-up kit • 2.5" 

swivel inlet • Finish cast brass or chrome plated • UL listed • Length, 7.00" 

• Weight, 19.00 lbs. (Incl. pick-up hose). 

HF-500 Hydro-Foam ® Master Stream Nozzle 

Constant gallonage 500 GPM (1892 L/min) • 1/2, 1, and 3% proportioning • Clear vinyl pick-up hose (9 ft.) 

• Optional quick connect coupling • Optional foam shutoff valve • Optional Drum pick-up kit • 2.5" swivel inlet 

• Finish cast brass or chrome plated • UL listed • Length, 7.00" • Weight, 19.00 lbs. (Incl. pick-up hose). 

Additional 


on Page 94 

Optional Quick-Connect Coupling (PN’s 20984 & 21597) 

A convenient way of attaching and detaching the pick-up hose to the nozzle • Available for HF-350 and HF-500 

• 1.0" NPT on both parts • Finish satin brass or chrome plated • Length, 3.375" • Weight, 1.20 lbs. 

Optional 3% / 6% Metering Valve (PN 70044) 

A quarter turn ball valve that allows for instant change of proportioning to 3% or 6% • Attaches to foam 

inlet of nozzle • Available for HF-350 only • Can be used in conjunction with quick-connect coupling 

• Satin brass or chrome plated finish • Length, 3.00" • Weight, 1.25 lbs. 

Optional Shutoff Valve (PN 70045) (Not Shown) 

A quarter turn ball valve that allows for positive shutoff of foam supply • Attaches to foam inlet of nozzle 

• Available for HF-350 and HF-500 • Can be used in conjunction with quick-connect coupling • Satin brass 

or chrome plated finish • Length, 3.00" • Weight, 1.25 lbs. 

Optional Drum Pick-up Kit (PN 00073) 

For industrial fixed monitor application • Allows for foam inlet of nozzle to be pre-connected to a 55 gal. drum of 

AFFF • Includes PVC pick-up tube with shutoff valve, a brass vacuum breaker and 9 ft. of clear reinforced vinyl 

pick-up hose • Available as complete kit only • Length, 44.00" • Weight, 7.40 lbs. 

For complete flow data on the HF-350 and HF-500 refer to chart on page 85. 

Hydro-Foam ® Nozzles


Hose and Nozzle Accessories 


227A-1.5" Piezometer Gauge 

PG Pistol Grip Adapter 

For use with any 1.5", 1.75", or 2.0" handline nozzle • Durable, 

lightweight Elk-O-Lite construction • 1.5" free swivel inlet • 1.5" NHT 

male outlet • Finish hard anodized • Length, 4.50" • Weight, 1.875 lbs. 

PG-S Pistol Grip Adapter (Not Shown) 

Same as PG except with 1.0” free swivel inlet • Length, 4.50" • Weight, 

1.81 lbs. 

For determining nozzle pressure, static pressure, and normal pressure • Durable, lightweight Elk-O- 

Lite construction • Liquid filled 0-300 psi gauge • 1.5" swivel inlet • 1.5" NHT male outlet • Finish hard 

anodized • Length, 5.00" • Weight, 2.25 lbs. 

227A-2.5" Piezometer Gauge (Not Shown) 

Same as 227A-1.5" except with 2.5” inlet and outlet • Length, 4.75" • Weight, 3.25 lbs. 

227A-3.5" Piezometer Gauge (Not Shown) 

Same as 227A-1.5" except with 3.5” inlet and outlet • Length, 6.83" • Weight, 6.25 lbs. 

D-327A Direct Connect Adapter 

Durable, lightweight Elk-O-Lite construction • 2.5" female inlet • 1.5" NHT male outlet • Finish hard 

anodized • Length, 3.50" • Weight, .75 lbs. 

D-327 Direct Connect Adapter(Not Shown) 

Similar to D-327A except rugged brass construction • Finish satin brass or chrome plated • Length, 

4.50" • Weight, 3.25 lbs. 

632 Hose and Ladder Strap 

Constructed of flexible, woven nylon strapping with rugged cast brass ends • An aid in maneuvering, 

carrying, dragging, or securing hoselines • Length, 42.00" • Weight, 1.375 lbs. 

285 Lightweight Hose Clamp 

Constructed of durable, lightweight ZA-27 • Detachable handle for compact storage (can be 

permanently attached) • Spring loaded safety lock for closed position • Unique jaw design allows for 

safer release of clamped hose • Convenient carrying handle • For use with 1.5" thru 3.0" hose (Even 

fits double jacket 3.0") • Satin cast finish • Length (w/ handle), 31.75" • Length (w/o handle), 21.00" 

• Weight, 19.125 lbs. 


285-MB Mounting Bracket for 285 

Constructed of durable, lightweight Elk-O-Lite • Holds 285 in stored position • Can be mounted 

vertically or horizontally • Spring clip holds handle in place • Length, 15.00" • Weight, 1.125 lbs. 

PF-520 Portable Flowmeter 

A great tool for any fire department • Self-contained, lightweight portable flowmeter for measuring 

flows up to 500 GPM • Measuring tube is equipped with a convenient carrying handle and a “Super 

Sensor” paddle wheel for accurate flow readings • Highly visible gauge reads 0-500 in 10 GPM 

increments • Gauge is housed in a weather-tight Pelican case that also contains; a 12V battery with 

indicator light; a charger with AC converter cord; a calibration control with indicator light; and cord 

storage • Finish hard anodized and PVC • Weight, 17.00 lbs.

For a century, we have strived to build the safest, 

most efficient and highest quality firefighting 

nozzles possible … The wide selection of nozzles shown 

on the preceding pages of this catalog is a result of that 

commitment … 100 years of developing, testing, designing 

and manufacturing so that you can do your job with 

more confidence.


Scorpion ® Monitors 

8294-02 w/optional 

SM-2000 

Features: 

• Durable, Lightweight Elk-O-Lite Construction 

• Flow Efficient 4.0" Vaned Waterway 

• Flows up to 2000 GPM 

• Double Gear Drive–Handwheels or Electric Motors 

• Hardened Steel Gears Completely Enclosed 

• 135° Vertical Travel 

• Horizontal Travel 360° on Handwheel Model and 

347° on Electric Model 

• Safety Stop Positions Comply with NFPA 1901 

• Liquid Filled Pressure Gauge 

• Grease Fittings for Easy Lubrication 

• Compact Design 

• Manual Override on Electric Model 

• Electric Model Furnished with SM-100E or 

Optional SM-2000E Nozzle 

• Inlet 4.0"-150# Flange 

• Outlet 3.5" NHT Male 

Benefits: 


• Ease of Operation–Manual or Electric 

• Minimal Friction Loss 

• Safe Operation up to Maximum Flow Limits 

• Easy/Flexible Installation 

• Excellent Stream Quality–Smooth Bore or 

Combination Nozzle 

• Easy/Minimum Field Maintenance 


Scorpion ® … 

The Industry Leader in Electrically 

Controlled Monitors! 

Handwheel Controlled Scorpion ® 

8294-02 Scorpion ® Deck Gun 

Durable, lightweight Elk-O-Lite construction with hardened steel worm gears • Fully enclosed gear 

cases for protection from the elements • Flows up to 2000 GPM through 4.0" waterway with cast-in 

vane • Double handwheel control assures ease of operation and positive lock in any position 

• Vertical travel is 135° (90° above to 45° below horizontal) • Horizontal travel is a full, continuous 

360° (handwheel remains stationary) • Stainless steel balls in all ball races • Furnished with liquid 

filled, 0-300# pressure gauge • Grease zerks for easy lubrication • Male outlet 3.5" NHT • Base inlet 

is 4.0"-150# ANSI flange • Furnished with 284A stream shaper (see page 34) • Optional with 

181-3A deluge tip (see page 16) or ST-195 triple stacked tips (see page 16) • Excellent with optional 

SM-2000 combination fog nozzle (see page 19) • Finish red urethane enamel with hard anodized trim. 

Additional 


page 94 

Scorpions in action 


8294-02 w/optional ST-195 

Flow Discharge 

Dimensions* 

Wt. 

Model GPM L/Min Threads Base Width Depth Height Lbs. 

8294-02 

8294-04 

w/ SM-1000E 

8294-04 

w/SM1250E 

8294-04 

w/ SM-2000E 

2000 

1000 

1250 

2000 

7570 

3785 

4730 

7570 

3.50" 

3.50" 

3.50" 

3.50" 

4.0"-150# 

ANSI Flange 

4.0"-150# 

ANSI Flange 

4.0"-150# 

ANSI Flange 

4.0"-150# 

ANSI Flange 

13.25" 

13.25" 

13.25" 

13.25" 

18.50" 

23.25" 

23.25" 

26.375" 

20.50" 

20.50" 

20.50" 

20.50" 

38.00** 

56.875 

56.875" 

55.375 

* Dimensions are with discharge of monitor horizontal. 

** Weight is less stream shaper, tips, or nozzle.


Standard Control Package 



SM-1250E 

Electrically Remote Controlled Scorpion ® 

8294-04 Scorpion ® Electrically Remote Controlled Monitor 

Durable, lightweight Elk-O-Lite construction with hardened steel worm gears • Fully enclosed 90° 

gear cases and totally sealed electric motors for protection from the elements • Manual override 

on both motors (.750" nut drive standard/wrench furnished) • Flows up to 2000 GPM through 4.0" 

waterway with cast-in vane • Vertical travel is 135° (90° above to 45° below horizontal) with 10 

safety stop options to meet NFPA 1901 • Horizontal travel is 347° with 37 safety stop options to 

meet NFPA 1901 • Motors are planetary gear type for maximum torque and minimum power drain 

• Furnished with grease fittings for easy lubrication • Complete with 284A stream shaper and 

SM-1000E combination fog nozzle • Optional with SM 1250E or SM-2000E combination fog nozzle 

• Inlet 4.0"-150# ANSI flange base • Outlet 3.5" NHT male • Finish red urethane enamel • Control 

system includes: One (1) NEMA 4 relay box, one (1) panel mounted switch control module, and 

one (1) secondary remote control box • P.I.C. chip design, electronic circuitry for 12VDC operation 

with normal 3.25 Amp draw • Current limiting motor protection with automatic reset • Circuit board 

moisture protection • Reverse polarity and auxiliary battery backfeed protection • Plug and cable 

prewired into relay box • Emergency circuit override capability • Circuit test indicator lights 

• Primary control will override secondary control and has automatic reset • Optional 12V battery 

pack • Optional hand-held remote control with 50' of cable • Optional 12/24VDC converter. 

Remote Control Box 

PN 81162001 

Optional Hand-Held Remote 

PN 81221001 

Optional hand-held 

control receptacle 

PN 81242001 

Panel Mounted 

Switch Control Module 

PN 81176001 

Optional 12V Battery Pack 

PN 80850001 

Relay Box 

PN 81076001 

Additional 


page 94 


SM-2000E 

Scorpion ® Monitors


Sidewinder Mini Monitor 

8494-01 w/5000-14 

8494-01 w/5000-24 

Features: 


• Fully Enclosed Stainless Steel Gears 

• Flow Efficient 2.0" Vaned Waterway 

• Three Nozzle Sizes – Flows from 15 to 350 GPM 

• Vertical Travel 135° 

• Horizontal Travel 180° or 334° 

• Gear Motors Totally Enclosed and Sealed 

• Double Ball Races with Stainless Steel Bearings 

• Constant Flow Nozzles 

• Manual Override 

• 12VDC or 24VDC System 

• Epoxy Encapsulated Control Module 

• Control Box with 4 Function Switches 

• Optional Control Box with Joy Stick 

• Wiring Harnesses with Waterproof Connectors 

• Compact Size 

8494-01 Sidewinder Remote Controlled Mini Monitor 

Designed as a front bumper turret monitor for wildland firefighting operations • Can also be used for deicing 

operations, dust abatement and many other applications • Constructed of durable, lightweight 

Elk-O-Lite • Flow Efficient 2.0" vaned waterway • Choose from three constant flow nozzle sizes for 

flows of 15 to 350 GPM • Stainless steel worm gears fully enclosed for protection from the elements • 

Vertical travel 135°, (90° above to 45° below horizontal) • Horizontal travel available 180° or 334° 

(please specify) • Double ball races with stainless steel bearings • Electric gear motors totally enclosed 

and sealed • Manual override in the event of power failure • Operating voltage 12VDC or 24VDC with 

maximum draw of 4 amps • Motors available either slow speed (65.5:1), fast speed (19.7:1) 

or combination of both (please specify) • 2.0" NPT female inlet • 1.5" NHT male outlet • Finish red 

urethane enamel • Control system includes: One (1) epoxy encapsulated control module, one (1) 

weather tight control box with 4 double throw toggle switches (water on/off, monitor up/down, 

monitor right/left, and nozzle straight/fog), and three (3) wiring harnesses with waterproof 

connectors • Optional joy stick control box available at additional cost (please specify). 

Nozzle Options 

5000-04 Remote Controlled Combination 

Nozzle (Not Shown) 

Constructed of durable, lightweight Elk-O-Lite 

• Constant flow straight stream to wide fog • 

Available in 15, 30 and 45 GPM (please 

specify) • Replaceable spinning teeth for wide 

protective water curtain • Stream changed 

with electric motor • Motor totally enclosed 

and sealed • 1.5" swivel inlet • Finish hard 


Benefits: 




• Safe Operation 

• Same Flow–Wide Fog to Straight Stream 

• Easy, Flexible Installation 

• Reliable Field-Tested System 

• Minimize Manpower 


Sidewinder … 

The Industry Leader in Remote 

Controlled Mini-Monitors! 


Sidewinder® in action 

5000-14 Remote Controlled Combination Nozzle 

Same as 5000-04 except available in 60, 95, 125 or 150 GPM (please specify) • Length, 5.875" • 

Weight, 3.063 lbs. 

5000-24 Remote Controlled Combination Nozzle 

Similar to 5000-04 except slightly larger and available in 175, 200, 250 or 350 GPM (please specify) 

• Length, 5.875" • Weight, 3.125 lbs. 

SM-10FE Remote Controlled De-Icing/Anti-Icing Nozzle 

Similar to TSM-10F (sse page 2) except stream pattern changed by 12VDC or 24VDC motor (please 

specify) • Also does not have spinning teeth • Flow range is 20 to 120 GPM • 1.5" Swivel base • 

Length, 7.75" • Weight, 4.875 lbs.


Sidewinder 

Electrical 

System 

Layout 


Control Boxes 

8494-01 Standard Control Box (PN 81122001) 

Standard control box is a weathertight enclosure suitable for mounting inside or outside the 

apparatus • Four (4) toggle switches: water on/off, monitor right/left, monitor up/down, and 

nozzle straight/fog • Power pilot light • Amphenol connector • Dimensions: Length, 4.875"; Width, 3.125"; 

Height, 3.00" • Weight, 1.20 lbs. • Optional control box (PN 81172001) is a weathertight enclosure suitable 

for mounting inside or outside the apparatus • Joy stick controls all four (4) functions: monitor right/left; 

monitor up/down; nozzle straight/fog (thumb switch on top of joy stick); and water on/off (trigger switch on 

front of joy stick) • Separate toggle switch for water on/off function • Power pilot light • Amphenol connector 

• Dimensions: Length, 8.625"; Width, 4.6875"; Height, 9.50" • Weight, 5.00 lbs. 

Control Module 

8494-01 Control Module (PN 81206000) 

Solid state circuitry completely encapsulated in epoxy • Furnished with waterproof wiring 

connectors • Dimensions: Length, 4.125"; Width, 2.50"; Height, 2.375" Weight, 1.563 lbs. 

Optional CAF Tip 

187CAF Elk-O-Lite ® Smooth Bore Tip 

Durable, lightweight Elk-O-Lite construction • For application of Compressed Air Foam (CAF) with 

Sidewinder monitor • Use with 281A stream shaper • Inlet 1.5" NHT female • Discharge 1.375" • 

Finish hard anodized • Length, 10.00" • Weight, .688 lbs. 

281A Elk-O-Lite ® Stream Shaper 

Durable, lightweight Elk-O-Lite construction • Replaceable acetal vanes • Inlet 1.5" NHT female • Outlet 1.5" 

NHT male • Finish hard anodized • Length, 2.50" • Weight, .50 lbs. 

Optional Electrically Operated Valve Kit 

Optional Electrically Operated Valve Kit (PN 81181001) 

Kit includes: One (1) 2920E 2.0" electrically actuated valve; one (1) valve control module; and three (3) wiring 

harnesses (specify lengths). 


Threads 

Dimensions Wt. 

Model GPM L/Min Outlet Inlet Width Depth Height Lbs. 

8494-01 

w/ 5000-04 

8494-01 

15, 30, or 45 57, 115 1.50" NHT 

1.50" NHT 

2.00" NPT 8.563" 

2.00" NPT 8.563" 

8.313" 11.063" 15.875 

8.313" 11.063" 15.875 

w/5000-14 

8494-01 

w/5000-24 

60, 95, 125 

or 150 

175, 200, 250 

or 350 

or 170 

225, 360, 475 

or 568 

660, 775, 

945 or 1355 

1.50" NHT 2.00" NPT 8.563" 

8.313" 11.063" 15.875 

Additional 


page 94 

Optional Joystick 

Control Box 

Sidewinder Mini Monitor


Deck Guns 

The Python ® 

299-11P Python ® Deck Gun 

Rugged all brass construction with cast brass swivel joints and seamless 2.5" ID brass tubing for 

waterway • Full, unobstructed waterway allows for 

flows up to 1250 GPM • Stainless steel handle rod 

controls vertical travel of 135° (90° above to 45° below 

horizontal) • Full 360° horizontal travel • Positive twist 

lock both vertical and horizontal travel • Grease fittings 

at all swivel joints • Bronze bearings in all ball races • 

299-11 w/optional CJ 

Outlet 2.5" NHT male • Inlet (see options listed in chart) • 

Optional “Steering Wheel” handle • Optional with 282B 

stream shaper (see page 74) and 181 smooth bore tip 

(see page 16) • Finish polished chrome plated. 

299-20 w/optional SM-2000 

299-20 Giant Python ® Deck Gun 

Rugged all stainless steel construction with cast stainless swivel joints and seamless 3.5" ID stainless 

steel tubing • Full, unobstructed waterway allows for flows up to 2500 GPM • Both vertical and 

horizontal movement are controlled with handwheel driven worm gears • Vertical travel is 150° (90° 

above to 60° below horizontal) • Horizontal travel is a full 360° • Grease fittings at all swivel joints for 

easy lubrication • Stainless steel bearings in all ball races • Liquid filled pressure gauge • Outlet 3.5" 

NHT male • Inlet (see options listed in chart) • Optional with 284B stream shaper (see page 74) and 

181-3 smooth bore tip (see page 16) • Finish red urethane enamel with chrome plated trim. 

The Stingray ® 

8393P w/optional CSW-L 

8393P Stingray ® Deck Gun 

Rugged, corrosion resistant cast brass construction • Full 3.0" unobstructed waterway • Flows up to 

1250 GPM • Handwheel driven worm gear fully enclosed and protected from the elements • Stainless 

steel worm • Vertical travel from 75° above to 55° below horizontal • Gear holds vertical position 

wherever it is stopped • Four ball races with bronze balls and grease zerks for easy lubrication • 

Full 360° rotation with positive twist lock • Outlet 2.5" NHT male • Inlet (see options listed in chart) • 

Liquid filled pressure gauge • Compact design for easy, flexible installation • Optional with 282B 

stream shaper (see page 74) and 181 smooth bore tip (see page 16) • Finish red 

urethane enamel. 

The Stinger® 

Additional 


pages 94-95 

Deck Guns 

8297-98 w/optional SM 1250 

8297-98 Stinger® Deck Gun 

Durable, lightweight Elk-O-Lite construction • Full 3.0" unobstructed waterway for flow efficiency up 

to 1250 GPM • Handwheel driven, vertical worm gear fully enclosed for protection from the elements 

• Grease fitting for easy lubrication • Vertical travel from 70° above to 25° below horizontal in deck 

mount mode • Full 360° travel in deck mount mode with positive twist lock • Liquid filled pressure 

gauge • Can be removed from top mount adapter (8298) and deployed as a portable monitor (see 

pages 26 and 27) • Carrying handle doubles as quick release mechanism • Inlet 3.0"-150# ANSI 

flange • Outlet 2.5" NHT male • Standard with 282A stream shaper and ST-194 quad-stacked tips • 

Finish red urethane enamel with hard anodized trim. 

Stinger®...The Industry Leader in Dual-Purpose Monitors!



Durable, lightweight Elk-O-Lite construction • Full 3.0" unobstructed 

waterway for flow efficiency up to 1250 GPM • 

Handwheel driven, vertical worm gear fully enclosed for 

protection from the elements • Grease fitting for easy 

lubrication • Vertical travel from 70° above to 25° below 

horizontal in deck mount mode • Full 360° travel in deck mount 

mode with positive twist lock • Liquid filled pressure gauge • Can 

be removed from deck mount fixture (8299) and be deployed as a 

portable monitor (see pages 26 and 27) • Carrying handle doubles 

as quick release mechanism • Deck mount fixture bolts to top 

deck • Two 2.5" clappered, swivel female inlets • Can be fed with 

one or two short “Pony” lengths of 2.5" or 3.0" hose • Outlet 

2.5" NHT male • Standard with 282A stream shaper and ST-194 

quad-stacked tips • Finish red urethane enamel with hard anodized 

trim. 

8297-99 w/optional CSW-L 

Deck Guns 

The Scorpion ® 


Durable, lightweight Elk-O-Lite construction with stainless steel worm gears • Fully enclosed gear 

cases for protection from the elements • Flows up to 2000 GPM through 4.0" waterway with castin 

vane • Double handwheel control assures ease of operation and positive lock in any position • 

Vertical travel is 135° (90° above to 45° below horizontal) • Horizontal travel is a full, continuous 

360° (handwheel remains stationary) • Stainless steel balls in all ball races • Furnished with liquid 

filled, 0-300# pressure gauge • Grease zerks for easy lubrication • Male outlet 3.5" NHT • Base inlet 

is 4.0"-150# ANSI flange • Furnished with 284A stream shaper (see page 34) • Optional with 181-3A 

deluge tip or ST-195 triple stacked tips (see page 16) • Finish red urethane enamel with hard anodized 

trim. 


Same as 8294-02 except controlled by two 12V or 24V electric motors • See complete specifications 

on page 25. 


Flow Discharge Available 

Dimensions* Wt.** 

Model GPM L/Min Threads Bases Width Depth Height Lbs. 

299-11P 1250 4165 2.5" NHT 2.5"or 3.0" NPT Fe; 18.00" 24.00" 24.50" 45.00 

3.0" or 4.0"-150# 

ANSI Flange 

299-20 2500 9462 3.5" NHT 3.0" or 4.0" NPT Fe; 24.00" 27.00" 32.00" 120.00 

4.0"-150# ANSI Flange 

8294-02 2000 7570 3.5" NHT 4.0"-150# ANSI Flange 13.25" 18.50" 20.00" 38.00 

8294-04 

w/SM-1000E 

8294-04 

w/SM-1250E 

8294-04 

w/SM-2000E 

1000 

1250 

2000 

3785 

4730 

7570 

3.5" NHT 

3.5" NHT 

3.5" NHT 

4.0"-150# ANSI Flange 13.25" 23.25" 20.25" 56.875 

4.0"-150# ANSI Flange 13.25" 23.25" 20.25" 56.875 

4.0"-150# ANSI Flange 13.25" 23.25" 20.25" 55.375 

8297-98 1250 4730 2.5" NHT 3.0"-150# ANSI Flange 15.00" 15.50" 13.75" 19.50 

8297-99 

8393P 

1250 

1250 

4730 

4730 

2.5" NHT 

2.5" NHT 

2 - 2.5" Swivels 

3.0" NPT Fe; 3.0" or 


15.50" 17.00" 18.50" 

14.75" 15.75" 15.75" 

22.50 

47.50 

* Dimensions are with discharge of monitor horizontal. 

** Weight is less stream shaper and tip but with nozzle where included. 

Additional 


pages 94-95 

8294-04 w/optional SM-1250E 

Deck Guns


Stinger® Monitors 

8297-10 front view 

Stinger® Dual-Purpose Monitors 

Features 

• Durable, Lightweight ELK-O-LITE ® Construction 

• Flow Efficient 3.0" Waterway 

• Fully Enclosed Worm Gear 

• Handwheel Controlled Vertical Travel 

• Safety Stop at 35 Degrees Above Horizontal (Can be 

overridden in Deck Mount Mode) 

• 95 Degree Vertical Travel (In Deck Mount Mode) 

• Convenient Carrying Handle 

• Safety Lock for Base Release 

• 360 Degree Horizontal Rotation (In Deck Mount Mode) 

• Positive Horizontal Twist Lock 

• Grease Fitting for Easy Lubrication 

• Liquid-Filled Pressure Gauge 

• Six Optional Portable Bases with Folding Legs 

• Rugged, Cast Almag Legs 

• Positive Leg Locks 

• Self-Adjusting Ground Spikes with Carbide Tips 

• Convenient Carrying Handle (For Portable Base) 

• Free-Swivel Connections on All Single Inlet Bases 

• Two Optional Deck Mounts 

• Flow Efficient 282A Stream Shaper 

• Quad-Stacked Tips ST-194 

• Heavy-Duty 10' Safety Chain (not shown) 

Benefits 


• Two Guns in One – Deck and Portable 



• Easy Deployment by One Person 

• Stores Easily – Compartment, Runningboard, 

or Tailboard 

• Safe Operation up to Maximum Flow Limits 

• Supply with 2.5", 3.0", 3.5" or LDH in Portable 

Mode 

• Preconnect Portable Base for “Bomb” Load 

• Pre-plumb for Top Mount Installation 

• Supply Deck Mount Fixture with 1 or 2 Pony 

Lengths 

• Easy, Minimal Field Maintenance 


Stinger®… 

The Industry Leader in 

Dual-Purpose Monitors! 

8297-10 Stinger® Upper Unit 

Durable, lightweight Elk-O-Lite construction • Can be deployed on any of 6 portable bases • Can 

be utilized on either of 2 top deck mount fixtures • Carrying handle doubles as quick release 

mechanism • Full 3.0" unobstructed waterway for flow efficiency up to 1250 GPM • Handwheel 

driven, vertical worm gear fully enclosed for protection from the elements • Grease fitting for 

easy lubrication • Vertical travel from 70° above to 25° below horizontal in deck mount mode • 

Safety stop at 35° above horizontal for portable mode • Full 360° travel in deck mount mode with 

positive twist lock • Liquid filled pressure gauge • Flow rated at: 1250 GPM in deck mount mode; 

1000 GPM with single inlet portable base; and 800 GPM with the double 2.5" portable base • 

Standard with 282A stream shaper and ST-194 quad-stacked tips • Finish red urethane enamel 

with hard anodized trim. 

8297-10 rear view 


8297-25 w/standard 282A and ST-194 

8297-25 Stinger® Portable Monitor (2-2.5" Swivels) 

8297-10 upper unit complete with portable base • For flows up to 800 GPM • Two 2.5" 

clappered, female swivel inlets • Base body constructed of durable, lightweight 

Elk-O-Lite • Rugged, cast Almag legs lock in place for deployment and fold 

for compact storage • Self-adjusting ground spikes with carbide tips • 

Furnished with 10' safety chain • Finish red urethane enamel with 

hard anodized trim. 

Additional 


pages 94-95


Stinger® Dual-Purpose Monitors 

8297-40 Stinger® Portable Monitor 

8297-10 upper unit complete with portable 

base • For flows up to 1000 GPM • One 4.0" 

female R/L free swivel inlet • Base body constructed 

of durable, lightweight Elk-O-Lite • Rugged, cast Almag 

legs lock in place for deployment and fold for compact 

storage • Self-adjusting ground spikes with carbide tips • 

Furnished with 10' safety chain • Finish red urethane enamel 


8297-40 w/optional CSW-L 


8297-35 Stinger® Portable Monitor (Not Shown) 

Same as 8297-40 except with a 3.5" free swivel inlet. 


Same as 8297-40 except with a 4.5" free swivel inlet. 

8297-51 Stinger® Portable Monitor 

8297-10 upper unit complete with portable base • For flows up to 1000 GPM • 

One 5.0" free swivel, locking Storz inlet • Base body constructed of durable, lightweight 

Elk-O-Lite • Rugged, cast Almag legs lock in place for deployment and fold for 

compact storage • Self-adjusting ground spikes with carbide tips • Furnished with 10' 

safety chain • Finish red urethane enamel with hard anodized trim. 



Same as 8297-51 except with a 4.0" free swivel locking Storz inlet. 

Additional 


pages 94-95 


8297-10 upper unit complete with 8298 top mount adapter for deck gun application • For 

flows up to 1250 GPM • Finish red urethane enamel with hard anodized trim. 


SM-1250 


8297-10 upper unit complete with 8299 deck mount fixture for deck gun application • For 

flows up to 1250 GPM • Finish red urethane enamel with hard anodized trim. 

Stinger® Portable Bases 

2 - 2.5" Female Swivel Inlets...................PN 80791001 

1 - 3.5" Female Free Swivel Inlet.............PN 80930001 

1 - 4.0" Female Free Swivel Inlet.............PN 80929001 

1 - 4.5" Female Free Swivel inlet.............PN 80931001 

1 - 4.0" Free Swivel Storz Inlet................PN 80928001 

1 - 5.0" Free Swivel Storz Inlet................PN 80927001 

Thread Sizes 

Flow 

Dimensions 

Model Inlet Discharge GPM L/Min Width Depth Height 

8297-10 

8297-25 

8297-35 

8297-40 

— 

2 - 2.5" F 

1 - 3.5" F 

1 - 4" F 

2.50" 

2.50" 

2.50" 

2.50" 

— 

800 

1000 

1000 

— 

3030 

3785 

3785 

15.00" 

23.00" 

23.00" 

23.00" 

15.50" 

26.00" 

26.00" 

26.00" 

12.00" 

16.25" 

16.25" 

16.25" 

8297-41 1 - 4" Storz 2.50" 1000 3785 23.00" 26.00" 16.25" 

Wt. 

Lbs. 

14.50* 

26.75* 

29.00* 

29.375* 

28.875* 


CSW-L 

Thread Sizes 

Flow 

Dimensions 

Model Inlet Discharge GPM L/Min Width Depth Height 

8297-45 1 - 4.5" F 2.50" 1000 3785 23.00" 26.00" 16.25" 

8297-51 1 - 5" Storz 2.50" 1000 3785 23.00" 26.00" 16.25" 

8297-98 

8297-99 

3" Flange 

2 - 2.5" F 

2.50" 

2.50" 

1250 

1250 

4730 

4730 

15.00" 

15.50" 

15.50" 

17.00" 

13.75" 

18.50" 

*These weights are without stream shaper and tips. 

Wt. 

Lbs. 

29.625* 

30.75* 

19.50* 

22.50* 

Stinger® Monitors


Stinger® Accessories 

8298 Stinger® Top Mount Adapter 

Durable, lightweight Elk-O-Lite construction • Allows 8297-10 to be utilized as a preplumbed 

deck gun • Fits 3.0" -150# ANSI flat face flange • Finish hard anodized • 

Note: Companion flange, bolts and gasket not furnished (Call our customer 

service at 1-800-346-0250 for availability). 

8299 Stinger® Top Mount Fixture 

Durable, lightweight Elk-O-Lite construction • Bolts to top deck plate to allow 8297-10 

to be utilized as pre-connected deck gun • Two 2.5" clappered swivel inlets • Keep 

one or both connected to discharge outlets with pony lengths of 2.5" or 3.0" hose 

• Finish red urethane enamel with hard anodized trim. 

New! 

8297MB Stinger® Mounting Bracket for Storage 

A new, improved mounting bracket for holding the Stinger in place while being stored • Constructed 

of durable, lightweight Elk-O-Lite Heavy-duty, spring-loaded locking arms • Quick, easy release • Can 

be mounted vertically as well as horizontally • Finish cast Elk-O-Lite • Length; 18.375" • Width; 12.5" 

• Weighs 4.45 lbs. (only fits new style Stinger with tee handle). 

8298EX The Pipe TM Extension for Stinger® 

For extending the height of the deck mounted Stinger 18" • Constructed of durable, lightweight Elk-O- 

Lite • Fits on 8298 top mount adapter • Finish red urethane enamel with hard anodized trim • Length 

• Weight 9.9 lbs. 

New! 

8298EX The Pipe TM Optional Caution Lamp Kit (PN 81258) 

Warns apparatus driver when the 8298EX is installed on 8298 top mount adapter • Kit consists 

of: one (1) magnetic switch which mounts to the 8298; two (2) magnets which are installed in base 

of The Pipe; and a yellow incandescent lamp with caution decal for mounting inside apparatus cab. 

8298EX-MB Mounting Bracket for Storing The Pipe TM 

Designed to hold the 8298EX in place when it’s in storage • Can be mounted vertically or horizontally 

• Constructed of durable, lightweight Elk-O-Lite with a heavy-duty rubber strap • Red urethane 

enamel finish • Length, 6.5" • Width 6.063" • Weight, 1.45 lbs. 

New! 

SM-100F Select-O-Matic ® Master Stream Nozzle 

Flows 300 to 1000 GPM • See page 18. 

CSW Select-O-Flow ® Master Stream Nozzle (Not Shown) 

Constant/select gallonage: 300, 550 and 750 GPM settings • See page 20. 

CSW-L Select-O-Flow ® Master Stream Nozzle 

Constant/select gallonage: 350, 500, 750, 1000 and 1250 GPM settings • See page 20. 

Stinger® Accessories 

SM-1000 Select-O-Matic ® Master Stream Nozzle (Not Shown) 

Flows 300 to 1000 GPM • See page 18. 


Flows 300 to 1250 GPM • See page 18.


8397 Elk-O-Lite ® Portable Monitor w/6 Optional Bases 

Durable, lightweight Elk-O-Lite construction • Flows up to 1250 

GPM • Handwheel driven worm gear (fully enclosed) allows vertical 

travel from 85° above to 15° below horizontal • Safety stop at 

35° above horizontal • 90° horizontal travel (45° either side 

of center) • Positive horizontal twist lock • Two rugged, 

convenient carrying handles • Liquid filled pressure 

gauge • Grease fittings for easy lubrication • Six 

optional base configurations (please specify): 

2-2.5" Clappered Female Swivel Inlets 

1-3.5" Female Free Swivel Inlet 



1-4.0" Locking, Free Swivel Storz Inlet 

1-5.0" Locking, Free Swivel Storz Inlet 

All bases feature rugged, cast Almag, folding legs • Legs feature 

positive locks and self adjusting ground spikes with carbide tips • 

Furnished with 10' safety chain • Standard with 282A stream 

shaper and ST-194 quad stacked tips • Optional mounting bracket 

8297MB (see page 32) • Finish red urethane enamel with hard 

anodized trim • Width, 23.00" • Depth, 26.00" • Height, 16.25" • 

Weight, 26.75 lbs. (without 282A and ST-194). 

Same as Stinger but doesn’t 

detach from base! 

New! 

Portable Monitors 

8397 w/standard 282A and ST-194 

New! 

8397 stored on 8297 MB 

8287 Elk-O-Lite ® 3-Inlet Portable Monitor 

Durable, lightweight Elk-O-Lite construction • Flows up to 1250 GPM • 

Handwheel driven worm gear allows vertical travel from 85° above to 

15° below horizontal • Safety stop at 25° above horizontal • Handwheel 

driven spur gear allows for 360° horizontal travel • Positive horizontal 

lock mechanism • Three 2.5" clappered female swivel inlets • Liquid filled 

pressure gauge • Two rugged, convenient carrying handles • Furnished 

with 10' safety chain • Optional top mounting fixture #8290 • Standard 

with 283A stream shaper and ST-194 quad stacked tips • Finish red 

urethane enamel with chrome plated and hard anodized trim • Width, 

19.50" • Depth, 21.00" • Height, 19.00" • Weight, 48.00 lbs. 

8287 w/standard 283A and ST-194 

Portable Monitors


Monitor Accessories 


For use on Elk-O-Lite playpipes and ball shutoffs when using smooth bore tips • Durable, 

lightweight Elk-O-Lite construction • Replaceable Acetal vanes • 1.5" female inlet • 1.5" male 

outlet • Finish hard anodized • Length, 2.50" • Weight, .50 lb. 


For use on Elk-O-Lite monitors and deck guns when using smooth bore tips • Durable, lightweight 

Elk-O-Lite construction • Replaceable Acetal vanes • 2.5" female inlet • 2.5" male outlet 

• Finish polished or hard anodized (please specify) • Length, 4.50" • Weight, 1.50 lbs. 

New! 

282B Brass Stream Shaper (Not Shown) 

Similar to 282A except rugged brass construction (see page 74). 



Elk-O-Lite construction • Replaceable Acetal vanes • 3.5" female inlet • 2.5" male outlet • Finish hard 

anodized • Length, 5.75" • Weight, 1.50 lb. 





Elk-O-Lite construction • Replaceable Acetal vanes • 3.5" female inlet • 3.5" male outlet • Finish hard 

anodized • Length, 3.5" • Weight, 1.50 lb. 



181-3A Elk-O-Lite ® Deluge Tip 

For use with Elk-O-Lite deck guns • See full description on page 16. 

ST-194 Elk-O-Lite ® Quad Stacked Tips 

For use with Elk-O-Lite portable monitors and deck guns • See full description on page 16. 

ST-195 Elk-O-Lite ® Triple Stacked Tips 

For use with Elk-O-Lite deck guns • See full description on page 16. 

SM-100F Select-O-Matic ® Master Stream Foam Nozzle 

Automatic nozzle with flow range of 300 to 1000 GPM • See full description on page 18. 

CSW-L Select-O-Flow ® Monitor Nozzle 

Constant/select gallonage: 350, 500, 750, 1000 and 1250 GPM • See full description on page 20. 

SM-1000 Select-O-Matic ® Monitor Nozzle 


SM-1250 Select-O-Matic ® Monitor Nozzle (Not Shown) 


Monitor Accessories 

SM-2000 Select-O-Matic ® Monitor Nozzle 


81204 Anchor Kit 

Safety first for any portable master stream appliance • Kit contains: one 19.00" steel stake, 

one 4.0 lb. hammer, one 10.00' heavy-duty safety chain, and one Nylon zippered carrying bag.

For a century, Elkhart Brass has 

been committed to building the safest, 

most efficient and highest quality 

master stream devices possible...The 

wide selection of monitors, turrets and 

deck guns shown on the preceding 

pages of this catalog is a result of that 

commitment...100 years of developing, 

testing, designing and manufacturing; 

so that you can do your job with 

confidence.


Fireground Appliances 

Ball Valved Wyes 

B-95 Brass 3-Way Ball Valved Wye (Not Shown) 

B-95A Elk-O-Lite ® 3-Way Ball Valved Wye 

Durable, lightweight Elk-O-Lite construction • Acetal valve balls 

with adjustable neoprene seats • Positive twist lock handles 

• One swivel inlet available in 2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 

or 6.0" (please specify) • Three 2.5" male outlets • Finish red 

urethane enamel with hard anodized trim. 

Same as B-95A except rugged brass construction and chrome plated trim. 

B-97A Elk-O-Lite ® 

2-Way Ball Valved Wye 

Durable, lightweight Elk-O-Lite construction • Acetal valve balls with adjustable neoprene seats • 

Positive twist lock handles • One swivel inlet available in 2.5", 3.0", 3.5", 4.0", 4.5", 5.0", or 6.0" 

(please specify) • Two 2.5" male outlets • Finish red urethane enamel with hard anodized trim. 

B-97 Brass 2-Way Ball Valved Wye (Not Shown) 

Same as B-97A except rugged brass construction and chrome 

plated trim. 

B-100 Brass 2-Way Ball Valved Wye 

Rugged brass construction • Acetal valve balls with selfadjusting 

UHMWPE seats • Durable, flexible molded urethane 

handles • 2.5" swivel inlet • Two 1.5" male outlets • Finish red 

urethane enamel with satin brass or chrome plated trim. 

B-100-L Brass 2-Way Ball Valved Wye (Not Shown) 

Same as B-100 except with 1.5" swivel inlet. 

Optional 

Pressure 

Gauge 

Both the 

B-100A and 

BG-104A 

are available 

with a builtin 

pressure gauge. The gauge is 

liquid filled and reads from 0 to 

200 psi. This option is ideal for 

hi-rise operations. 

B-100A Elk-O-Lite ® 2-Way Ball Valved Wye 

Durable, lightweight Elk-O-Lite construction • Acetal valve balls with self-adjusting UHMWPE seats 

• Rugged, flexible molded urethane handles • 2.5" swivel inlet • Two 1.5" male outlets • Optional pressure 

gauge • Finish red urethane enamel with hard anodized trim. 

B-100-LA Elk-O-Lite ® 2-Way Ball Valved Wye 

Same as B-100A except with 1.5" swivel inlet. 

Plain Wyes 

1A Elk-O-Lite ® Plain Wye 

For dividing one supply line into two separate lines • Constructed of durable, lightweight Elk-O-Lite • 

Choice of 2.5" or 3.0" swivel inlet with two 2.5" male outlets • Also available with 2.5" or 1.5" swivel 

inlet and two 1.5" male outlets • Finish red urethane enamel with hard anodized trim. 


Model 

Thread Sizes 

Inlet Outlet 

Wt. 

Length Lbs. 

B-95A 

B-95 

B-97A 

B-97 

B-100 

2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 6.0" F 

2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 6.0" F 

2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 6.0" F 

2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 6.0" F 

2.5" F 

3 - 2.5" M 

3 - 2.5" M 

2 - 2.5" M 

2 - 2.5" M 

2 - 1.5" M 

10.50" 

10.50" 

9.00" 

9.00" 

5.50" 

21.50 

46.00 

14.50 

31.00 

9.00 

Model 

Thread Sizes 

Inlet Outlet 

Wt. 

Length Lbs. 

B-100-L 

B-100A 

B-100-LA 

1A 

1A 

1.5" F 

2.5" F 

1.5" F 

2.5", 3.0" F 

1.5", 2.5" F 

2 - 1.5" M 

2 - 1.5" M 

2 - 1.5" M 

2 - 2.5" M 

2 - 1.5" M 

5.50" 

5.50" 

5.50" 

8.00" 

4.75" 

8.50 

4.50 

3.875 

4.25 

2.50


Ball Valved Siamese 

B-98A Elk-O-Lite ® 2-Way Ball Valved Siamese 

Durable, lightweight Elk-O-Lite construction • Acetal valve balls 

with adjustable neoprene seats • Positive twist lock handles • Two 

2.5" swivel inlets • One swivel outlet available in 2.5", 3.0", 3.5", 

4.0", 4.5", 5.0", or 6.0" (please specify) • Optional .75" drain valves 

• Finish red urethane with hard anodized trim. 

B-98 Brass 2-Way Ball Valved Siamese (Not Shown) 


B-98A w/optional 

.75" drain valves 


B-99A Elk-O-Lite ® 3-Way Ball Valved Siamese 

Durable, lightweight Elk-O-Lite construction • Acetal valve balls with adjustable neoprene seats • Positive 

twist lock handles • Three 2.5" swivel inlets • One swivel outlet available in 2.5", 3.0", 3.5", 4.0", 4.5", 5.0", or 

6.0" (please specify) • Optional .75" drain valves • Finish red urethane enamel with hard anodized trim. 

B-99 Brass 3-Way Ball Valved Siamese (Not Shown) 


Plain and Clappered Siamese 

2A Elk-O-Lite ® Plain Siamese 

For joining two lines into one • Constructed of durable, lightweight Elk-O-Lite • Two 2.5" swivel inlets with 

choice of one 2.5" or 3.0" male outlet • Finish red urethane enamel with hard anodized trim. 

4 Brass Clappered Siamese (Not Shown) 

Similar to 4A except constructed of rugged brass • Two 2.5" swivel inlets with choice of one 2.5" or 3.0" 

male outlet (no Storz options) • Finish red urethane enamel with satin brass or chrome plated trim. 

4A Elk-O-Lite ® Clappered Siamese 

For joining two lines into one • Constructed of durable, lightweight Elk-O-Lite • Furnished with .75" drain 

valve • Double swinging clappers • Leather carrying handle • Two 2.5" swivel inlets with choice of one 2.5" 

male, 3.0" male, 4.0" Storz, or 5.0" Storz outlet • Finish red urethane enamel with hard anodized trim. 

Water Thiefs 

BG-104A Elk-O-Lite ® Water Thief 

Durable, lightweight Elk-O-Lite construction • Allows for extending attack lines when preconnects 

won’t reach • Acetal valve balls with 2.5" adjustable neoprene seat and 1.5" self-adjusting UHMWPE 

seats • Positive twist lock handle on 2.5" valve • Durable, flexible urethane handles on 1.5" valves • 2.5" swivel 

inlet • One 2.5" and two 1.5" male outlets • Leather carrying handle • Optional pressure gauge • Finish red 


BG-104 Brass Water Thief (Not Shown) 

Same as BG-104A except rugged brass construction and satin brass or chrome plated trim. 

Model Inlet 

Thread Sizes 

Outlet 

Wt. 

Length Lbs. 

B-98A 

B-98 

B-99A 

B-99 

BG-104A 

2 - 2.5" F 

2 - 2.5" F 

3 - 2.5" F 

3 - 2.5" F 

2.5" F 

2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 6.0" F 

2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 6.0" F 

2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 6.0" F 

2.5", 3.0", 3.5", 4.0", 4.5", 5.0", 6.0" F 

2 - 1.5" M & 1 - 2.5" M 

9.00" 

9.00" 

10.50" 

10.50" 

10.50" 

14.50 

31.00 

21.50 

46.00 

10.75 

Model Inlet 

Thread Sizes 

Outlet 

Wt. 

Length Lbs. 

BG-104 

2A 

4A 

4 

2.5" F 

2 - 2.5" F 

2 - 2.5" F 

2 - 2.5" F 

2 - 1.5" M & 1 - 2.5" M 

2.5", 3.0" M 

2.5", 3.0" M or 4.0", 5.0" Storz 

2.5" or 3.0" M 

10.50" 

7.25" 

8.75" 

7.125" 

23.50 

4.50 

8.625 

12.00 

Fireground Appliances


LDH Appliances 

Features: 


• Free Swiveling, Locking Storz Connectors 

• Full Flow Ball Valves 

• Adjustable Relief/Dump Valves 

• Modular Design 

• Self-locking Ball Valves 

• Made in USA 

Benefits: 


• Easy Operation–Even at High Flows 

• Safe Fireground Operation 


• Working Pressure up to 200 psi 



Gated Manifolds 

9712 Elk-O-Lite ® 2-Way Gated Manifold (Not Shown) 

One 4.0" or 5.0" free swivel, locking Storz inlet • Two 2.5" quarter turn, ball valved outlets with 2.5" 

male threads • Full flow, self locking Hydro-loc valves • Acetal ball with neoprene seats • Adjustable 

relief/dump valve (75 to 250 psi) • Optional .75" bleeder valve • Finish red urethane enamel with hard 

anodized trim. 

9812 Elk-O-Lite ® 2-Way Gated Manifold 

One 4.0" or 5.0" free swivel, locking Storz inlet • Two X-86A 

(see page 40) gate valved outlets with 2.5" male threads 

• Adjustable relief/dump valve (75 to 250 psi) • Optional 

.75" bleeder valve • Finish red urethane with hard 

anodized trim. 

9713 Elk-O-Lite ® 3-Way Gated Manifold 

Same as 9712 except with three valved outlets. 

9813 Elk-O-Lite ® 3-Way Gated Manifold (Not Shown) 

Same as 9812 except with three gated outlets. 

Adjustable 

Relief/Dump 

Valve 

Each and 

every 9700 

and 9800 

series appliance is furnished with 

an adjustable relief/dump valve 

for safe LDH operations. This 

PRV is constructed of durable 

Elk-O-Lite with a stainless steel 

mechanism and a urethane seat. 

It is easily adjusted in the field 

from 75 to 250 psi. 

9715 Elk-O-Lite ® 5-Way Gated Manifold (Portable Hydrant) 

One 4.0" or 5.0" free swivel, locking Storz inlet • One 4.0" gear operated, quarter turn, ball valved outlet 

with 4.0" or 5.0" free swivel, locking Storz connection • Four 2.5" quarter turn ball valved outlets 

with 2.5" male threads • Full flow, self locking Hydro-loc valves • Acetal balls with neoprene seats 

• Adjustable relief/dump valve (75 to 250 psi) • Liquid filled pressure gauge (0-300 psi) • Finish red 


9815 Elk-O-Lite ® 5-Way Gated Manifold (Portable Hydrant) 

One 4.0" or 5.0" free swivel, locking Storz inlet • One 4.0" gear operated, quarter turn, ball valved 

outlet with 4.0" or 5.0" free swivel, locking Storz connection • Four X-86A (see page 40) gate valved 

outlets with 2.5" male threads • Adjustable relief/dump valve (75 to 250 psi) • Liquid filled pressure 

gauge (0-300 psi) • Finish red urethane enamel with hard anodized trim. 

See Piston Intake Valves on page 45 


Thread Sizes 

Approx. 

Model Inlet Outlet Length Wt. Lbs. 

9712 

9713 

9715 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

2 - 2.5" M 

3 - 2.5" M 

4 - 2.5" M and 1 - 4.0" or 5.0" Storz 

11.75" 

14.50" 

18.625" 

24.00 

28.375 

56.25 

Thread Sizes 

Approx. 


9812 

9813 

9815 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

2 - 2.5" M 

3 - 2.5" M 

4 - 2.5" M and 1 - 4.0" or 5.0" Storz 

11.250" 

13.50" 

18.625" 

22.00 

26.375 

52.25


Clappered Siamese 

4A Elk-O-Lite ® 2-Way Clappered Siamese 

For joining two lines into one • Constructed of durable, lightweight Elk-O-Lite 

• Furnished with .75" drain valve • Double swinging clappers • Leather carrying 

handle • Two 2.5" swivel inlets with choice of one 2.5" male, 3.0" male, 4.0" Storz, 

or 5.0" Storz outlet • Finish red urethane enamel with hard anodized trim. 


9702 Elk-O-Lite ® 2-Way Clappered Siamese (Not Shown) 

Two 2.5" clappered inlets • One 4.0" or 5.0" free swivel, locking Storz outlet 

• Spring loaded clappers with neoprene seats • Adjustable relief/dump 

valve (75 to 250 psi) • .75" bleeder valve • Finish red urethane enamel 


9703 Elk-O-Lite ® 3-Way Clappered Siamese 

Same as 9702 except with three 2.5" clappered inlets. 

Gated Siamese 

9722 Elk-O-Lite ® 2-Way Gated Siamese 

Two quarter turn, ball valved inlets with 2.5" female swivels • One 4.0" or 5.0" free swivel, locking Storz outlet • 

Full flow, self locking Hydro-loc valves • Acetal ball with neoprene seats • Adjustable relief/dump valve (75 to 250 

psi) • Optional .75" bleeder valve • Finish red urethane enamel with hard anodized trim. 

9823 Elk-O-Lite ® 3-Way Gated Siamese 

Same as 9822 except with three 2.5" gated inlets. 

9822 Elk-O-Lite ® 2-Way Gated Siamese (Not Shown) 

Two X-86A gate valved inlets with 2.5" female swivels • One 4.0" 

or 5.0" free swiveling, locking Storz outlet • Adjustable relief/dump 

valve (75 to 250 psi) Optional .75" bleeder valve • Finish red 


9723 Elk-O-Lite ® 3-Way Gated Siamese (Not Shown) 

Same as 9722 except with three 2.5" valved inlets. 

Water Thief Manifolds 

9743 Elk-O-Lite ® LDH Water Thief Manifold 

Free Swiveling, 

Locking Storz 

Connectors 

All 9700 and 9800 

series appliances are furnished with 

locking Storz connectors. This feature 

combined with our unique free 

swiveling inlets and/or outlets helps 

prevent accidental uncoupling of 

the large diameter hose; a definite 

safety feature. 

One 4.0" or 5.0" free swiveling, locking Storz inlet • Two 2.5" quarter turn ball valved outlets with 2.5" male 

threads • Full flow, self locking Hydro-Loc valves with acetal balls with neoprene seats • One 4.0" gear actuated, 

quarter turn ball valved outlet with acetal ball with UHMWPE seat • One 4.0" or 5.0" free swiveling, locking Storz 

outlet • Adjustable relief/dump valve (75 to 250 psi) • Finish red urethane enamel with hard anodized trim. 

New! 

9843 Elk-O-Lite ® LDH Water Thief Manifold 

One 4.0" or 5.0" free swiveling, locking Storz inlet • Two 2.5" gate valved outlets with 2.5" male threads • One 

4.0" gear actuated, quarter turn ball valved outlet with acetal ball with UHMWPE seat • One 4.0" or 5.0" free 

swiveling, locking Storz outlet • Adjustable relief/dump valve (75 to 250 psi) • Finish red urethane enamel with 

hard anodized trim. 

New! 

Thread Sizes 

Approx. 


9702 

9703 

9722 

9723 

4A 

2 - 2.5" F 

3 - 2.5" F 

2 - 2.5" F 

3 - 2.5" F 

2 - 2.5" F 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

11.00" 

13.50" 

11.75" 

14.50" 

8.75" 

16.50 

19.00 

24.75 

29.125 

8.625 

Thread Sizes 

Approx. 


9822 

9823 

9743 

9843 

2 - 2.5" F 

3 - 2.5" F 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

1 - 4.0" or 5.0" Storz 

2 - 2.5" M and 1 - 4.0" or 5.0" Storz 

2 - 2.5" M and 1 - 4.0" or 5.0" Storz 

11.25" 

13.50" 

16.00" 

16.00" 

22.75 

26.25 

48.90 

48.90 

LDH Appliances


Portable Foam Eductors 

Portable Foam Eductors 

See Eductor 

Performance Chart 

on Page 81 

Features: 

• Rugged, Corrosion Resistant Brass Construction 

• 1/2% Setting for Class A Foam* 

• Simple, Efficient Venturi Design 

• Inline or By-pass Models* 

• 1, 3, & 6% Settings for Class B foam* 

• Positive Setting Positions* 

• Removable Metering Valve 

• Clear PVC Pickup Hose – .625" ID x 1.0" OD 

• Removable Pickup Screen 

• Wide Selection of Flows* 

• Stainless Steel Check Ball* 

By-Pass Eductors 

240-60 By-Pass Foam Eductor 

60 GPM flow • By-pass allows for water only operations at lower inlet pressures • Positive 

setting metering valve (0, 1/2, 1, 3, & 6%) • 1.5" or 2.5" NHT free swivel inlet (please specify) 

• 1.5" NHT male outlet • Finish red urethane enamel with chrome plated trim • Length, 17.25" • 



Same as 240-60 except 95 GPM flow. 



Inline Eductors 

241-30 Inline Foam Eductor (Not Shown) 

30 GPM flow • Infinite setting metering valve (0 thru 6%) • 1.0" or 1.5" NHT free swivel inlet 

(please specify) • 1" NHT male outlet • Finish red urethane enamel with chrome plated trim • 


241-60 Inline Foam Eductor 

60 GPM flow • Positive setting metering valve (0, 1/2, 1, 3, & 6%) • 1.5" or 2.5" NHT free swivel inlet 

(please specify) • 1.5" NHT male outlet • Finish red urethane enamel with satin brass or chrome 

plated trim (please specify) • Length, 11.75" • Weight, 9.5 lbs. 








Similar to 241-60 except 250 GPM, a 2.5" 

NHT free swivel inlet, and a 2.5" NHT male 

outlet • Length, 16" • Weight, 16.75 lbs. 

241-N3 Inline Foam Eductor 

90 GPM flow • Single percentage metering 

valve (3%) • 1.5" NPSH swivel inlet and 

1.5" NPSH male outlet • Cast brass finish 

• Length, 10" • Weight, 5.75 lbs. 

241-N6 Inline Foam Eductor 

Same as 241-N3 except 6% metering. 

Benefits: 


• Easy Hook-up/Easy Set-up 

• Trouble-free Operation 

• Compatible with Most Foam Concentrates 

• A Size for All Handlines: 1" thru 3" 

• Cost Effective Class A Foam System 

• Can be deployed in any position 


Infinite Setting Valve 

Operating Pressure for Eductors 

These eductors are designed to achieve rated flow 

with an inlet pressure of 200 psi. They will operate at 

lower inlet pressures than this, but the flow rate and 

percentage rate will be effected (see chart on page 81). 

For more technical information on these eductors, call 

for our operating and maintenance instructions (Form 

No. EB-98069). 

Check List if Eductor Fails to Pick Up Foam 

These eductors are very basic in design and very 

easy to operate. However, there are many other 

conditions and situations that can cause the eductor 

to fail in picking up foam concentrate. If this happens 

check the following: 

✔ Mismatched nozzle 

✔ Partially closed nozzle 

✔ Clogged nozzle 

Metering Valves 

Positive Setting Valve 

✔ Ball check stuck 

✔ Metering valve clogged 

✔ Plugged pick up screen 

✔ Hose lay too long ✔ Metering valve set 

✔ Metering valve closed improperly 

✔ Nozzle elevated too high ✔ Kink in hose 

✔ By-pass valve open 

*These features not applicable to 241-N3 and 241-N6.


240-60P Built-In Foam Eductor 

Same operational features as portable 240-60 (see pg. 40) except furnished with valves, fittings and 

accessories for installing permanently behind the panel in pump compartment • 60 GPM flow @ 200psi 

inlet pressure. • Package includes: 

One 240 by-pass eductor 

One 890-01-01-D 1.0" inline valve 

Two 775-15 tee handles 

Two 775-11 rod guides 

One “thru the panel” metering valve with 5 settings (0, 1/2, 1, 3, & 6) 

One ball check valve 

One brushed stainless steel instruction plate (with hardware) 

2.0" NPT female inlet and outlet • 1.5" NPT female optional • Eductor 

and valves cast brass finish • Tee handles and rod guides chrome plated 

• Eductor length, 17.25" • Package weight, 32.875 lbs. 


Same as 240-60P except 95 GPM flow @ 200psi inlet pressure. 


Same as 240-60P except 125 GPM flow @ 200psi inlet pressure. 

Built-In Foam Eductors 

Typical 240-P Installation 

FROM PUMP 

240-P EDUCTOR 

Additional 


page 94 

TO DISCHARGE 

MINIMUM OF FIVE PIPE 

DIAMETERS STRAIGHT 

PIPE ON EDUCTOR 

DISCHARGE 

Check List if System Fails 

to Pick Up Foam 

✔ Foam handle not 

pulled out 

✔ Eductor handle not 

pulled out 

✔ Metering valve set 

improperly 

✔ Mismatched nozzle 

✔ Foam tank empty 

✔ Ball check stuck 

✔ Partially closed nozzle 

✔ Hose lay too long 

✔ Clogged nozzle 

✔ Foam tank not vented 

✔ Kink in hose 

✔ Metering valve clogged 

with dry foam 

✔ Elbow plumbed too 

close to inlet or outlet 

✔ Excessive friction loss 

between eductor and 

discharge outlet 

✔ Too much nozzle elevation 

.625 MIN. I.D. 

PIPE OR HOSE 

ADJUSTABLE 

METERING DEVICE 

See Eductor 

Performance Chart 

on Page 81 

BALL CHECK 

VALVE 

PULL-OUT 

FOR FOAM 

BY-PASS VALVE 

1,000 MIN. I.D. 

PIPE OR HOSE 

FLUSH LINE 

890-01-01-D 1" VALVE 

775-11 ROD GUIDE 

775-15 TEE 

HANDLE 

FOAM VALVE 

Threads Flow @ 200 psi 

Model Inlet* Outlet* GPM L/Min 

240-60P 

240-95P 

240-125P 

2.0" NPT Fe 

2.0" NPT Fe 

2.0" NPT Fe 

2.0" NPT Fe 

2.0" NPT Fe 

2.0" NPT Fe 

60 

95 

125 

225 

360 

475 

*1.5"NPT Female optional 

2" MINIMUM I.D. 

PIPE OR HOSE 

FOR 125 GPM 

EDUCTORS 

TO FOAM TANK 

PULL-OUT 

FOR FOAM 

Built-In Foam Eductors


Foam Supply Kits 

New! 

Pick-up Foam from Alternate Sources 

Foam Supply Kit – Type #1 (P/N 81231001) 

This kit allows a built-in, by-pass foam eductor system (our model 240P) 

to utilize an off-board foam concentrate supply (5 gal. pails/buckets); either 

when the on-board supply has been depleted; or, to allow use of another type 

of foam concentrate..... The kit includes the following parts: one .750", quarterturn, 

inlet valve assembly with elbow, quick-connect female coupling and 

quick-connect plug with chain; a brushed 

stainless steel escutcheon plate; and a 

foam pick-up hose assembly with 

quick-connect male coupling..... 

Finish cast brass 

with chrome plated 

trim. 

Use Built-in Foam Tank with Portable Eductor 

Foam Supply Kit – Type #2 (P/N 81232001) 

This kit allows the use of an on-board foam concentrate tank with a portable foam eductor attached 

to a pump side discharge.... A quick-connect, pick-up tube assembly permits easy switching from 5 

gal. pails/buckets to the on-board supply tank and back 

again if necessary..... The kit includes the following 

parts: one .750", quarter turn, inlet valve assembly 

with elbow, quick-connect female 

coupling and quick-connect plug 

with chain; a brushed stainless 

steel escutcheon plate; and a foam 

pick-up hose assembly with quickconnect 

coupling between the hose and the 

pick-up tube..... Finish cast brass with chrome 

plated trim. 

Consider these when preparing to apply Class B Foam 

Foam Supply Kits 

What is the hazard? (Non-ignited spill or burning spill) 

What is the fuel? (Hydrocarbon or polar solvent) 

What is the area of the hazard? (Square footage) 

What application density of AFFF is needed? 

N.F.P.A. Recommendations: 

Hydrocarbon-.10 GPM/Sq. Ft. (100 GPM/1,000 Sq. Ft.) 

Polar Solvent-.16 GPM/Sq. Ft. (100 GPM/1,000 Sq. Ft.) 

How much foam is on hand? 

N.F.P.A. Recommendations: (Foam for at least 15 minute application) 

95 GPM eductor @ 3%-45 gallons 

95 GPM eductor @ 6%-90 gallons 

What is eductor and nozzle capacity? (Nozzles must be matched with 

eductors) 

What is available water supply? (You may need to cool exposures 

while applying foam) 

Is mutual aid available? (Water, foam, eductors, etc.) 

Different types of foam are not compatible (i.e. AFFF and Protein) 

What is drain time and water/foam runoff conditions? (You may have 

to dike to secure area) 

What application technique is best for the situation? (Straight stream, 

power fog, foam tubes, cascade method, rain-drop method)


Foam Aeration Tubes 

There are occasions in fire suppression when greater expansion rates of foam solution are needed; such 

as when polar solvent fuels are involved; when using protein or fluoroprotein foam; or when securing 

a spill. For these special situations a foam aeration tube can be quickly and easily attached to many of 

our combination fog nozzles in order to achieve a higher expansion rate of the foam solution; up to 

15:1 in some cases. 

Handline Foam Aeration Tubes 

Foam Aeration Tubes 

246S Foam Aeration Tube 

For adding more air to foam solution in order to achieve greater 

expansion rates. • Durable, lightweight Elk-O-Lite construction • 

Built in Hydroverter • Quickly attaches to SM-10F, SM-10FG, 

TSM-10F, SM-20F, SM-20FG, TSM-20F, 4000-10, 4000-11, 

4000-12, 4000-13, 4000-14, 4000-16, 4000-17, 4000-18, 

4000-19, SFL-B, SFL-BG, SFM, SFM-G and TSFM • Cast finish 

with nylon cord wrap • Length 15.87" • Weight, 3.80 lbs. 

246S w/optional SM-20FG 

247S w/optional 

4000-23 

247S Foam Aeration Tube 

For adding more air to foam solution in order to achieve greater expansion rates. • Durable, lightweight 

Elk-O-Lite construction • Built in Hydroverter • Quickly attaches to DSM-30F, DSM-30FG, SM-30F, SM-30FG, 

TSM-30F, 4000-20, 4000-22, 4000-23, 4000-24 and 4000-26 • Cast finish with nylon cord wrap • Length 

15.87" • Weight, 3.80 lbs. 

244 Foam Aeration Tube 


Elk-O-Lite construction • Quickly attaches to SFL, SFL-G, SFL-GCG, SFL-GN and SFL-N • Cast finish with 

nylon cord wrap • Length 40.50" • Weight, 4.5 lbs. 

246 Foam Aeration Tube (Not Shown – Looks like 247) 


Elk-O-Lite construction • Quickly attaches to SM-10F, SM-10FG, TSM-10F, SM-20F, SM-20FG, SM-20F, 

4000-10, 4000-11, 4000-12, 4000-13, 4000-14, 4000-16, 4000-17, 4000-18, 4000-19, SFL-B, SFL-BG, 

SFM, SFM-G and TSFM • Cast finish with nylon cord wrap • Length 30.25" • Weight, 4.75 lbs. 

247 Foam Aeration Tube 


Elk-O-Lite construction • Quickly attaches to DSM-30F, DSM-30FG, SM-30F, SM-30FG, TSM-30F, 4000-20, 

4000-22, 4000-23, 4000-24 and 4000-26 • Cast finish with nylon cord wrap • Length 30.25" • 


Master Stream Foam Aeration Tube 

LX-100 Foam Aeration Tube (PN 02480000) 


Elk-O-Lite construction • Retrofits on all new style (after 1985) SM-100, SM-100E and SM-100H nozzles • 

Simply remove the yellow rubber bumper from the nozzle; install the molded urethane bumper/adapter; and the 

foam tube can be attached and detached in seconds • Tube Length 13.0" • Kit Weight, 3.40 lbs. 

New! 

Foam Aeration Tubes




fireground appliances possible...The 

wide selection of wyes, siamese, water 

thiefs, manifolds and foam eductors 

shown on the preceding pages 

of this catalog is a result of that 




confidence.


Suction Intake Valves 

2850 5.0" Gear Operated Butterfly Valve 

Quarter turn butterfly valve with gear operator to comply with NFPA 1901 • Rated 

at 200 psi • Cast iron body with Elk-O-Lite end caps • Aluminum/bronze disc • 

Reinforced EPDM seat (bi-directional) • Two piece stainless steel stem 

• Optional strainer on all male end caps • Optional air bleeder valve on 

all male end caps • Specify end caps from chart below • Finish red 

urethane enamel with polished chrome handwheel and hard anodized 

end caps. 

2860 6.0" Gear Operated Butterfly Valve 

Same as 2850 except 6.0" full flow waterway. 

Waterway Swivel Female 

Optional End Caps 

Rigid Female Rigid Female 5.0" Std. Wt. 

Model Size L.H. or R.L. Male (Hose Thrd.) (N.P.T.) Storz Handle Lbs. 

2850 

2860 

5.0" 

6.0" 

14 (4.50") 

15 (5.00") or 

16 (6.00") 

16 (6.00") 

or 

19 (5.00") 

34 (4.50") 

or 

35 (5.00") 

36 (6.00") 

or 

39 (5.00") 

04 (4.50") 

or 

05 (5.00") 

06 (6.00") 

01 (5.00") 

or 

02 (6.00") 

01 (6.00") 

12 G 

G 

35.75 

42.375 

2850-15-35-G 

Hydrant and Suction Intake Valves 

9786 Elk-O-Lite ® Piston Intake Valve 

One 4.0" or 5.0” free swivel, locking Storz inlet • Optional 3.5", 4.0", 4.5" or 5.0" threaded swivel inlet • Optional 

4.5" or 6.0" male inlet • One 4.5", 5.0", or 6.0" threaded swivel outlet • Durable urethane seat • Adjustable relief/ 

dump valve (75 to 250 psi) • .75" bleeder valve • Folding handwheel spinner • Finish red urethane enamel 


9787 Brass Piston Intake Valve 

Rugged, corrosion resistant brass construction • One 4.0" or 5.0" free swivel, locking Storz inlet • Optional 

3.5", 4.0", or 4.5" threaded swivel inlet • Optional 3.5", 5.0" or 6.0" male inlet • One 5.0" or 6.0" threaded 

swivel outlet • Durable urethane seat • Adjustable relief/dump valve (75 to 250 psi) • .75" bleeder valve 

• Folding handwheel spinner • Finish red urethane enamel with chrome plated trim. 

Hydrant Valves 

X-86A Elk-O-Lite ® Gate-Type Hydrant Valve 

2.5" non-rising stem gate valve • Constructed of durable, lightweight Elk-O-Lite • Metal to 

metal seat • Crank handle • Maximum operating pressure 175 psi • Finish red urethane enamel 


B-96A Elk-O-Lite ® Ball-Type Hydrant Valve 

2.5" quarter-turn ball valve • Constructed of durable, lightweight Elk-O-Lite • Acetal ball with 

adjustable, teflon impregnated, neoprene seat • Locking handle • 2.5" swivel inlet • 2.5" male outlet • 

Finish red urethane enamel with hard anodized trim. 

2940GA Elk-O-Lite ® Ball-Type Hydrant Valve 

4.0" quarter-turn, gear operated ball valve • Constructed of durable, lightweight Elk-O-Lite • Aluminum ball with 

UHMWPE seat • See inlet and outlet options in chart below • Finish red urethane enamel with hard anodized 

trim. 

Thread Sizes 

Model Inlet Outlet Dimensions Wt. Lbs. 

9786 

9787 

4.0" or 5.0" Storz; 4.5" or 6.0" M 

3.5", 4.0", 4.5" or 5.0" F 

4.0" or 5.0" Storz; 3.5", 5.0" or 6.0" M 

3.5", 4.0" or 4.5" F 

5.0" or 6.0" F 

5.0" or 6.0" F 

11.375" Length 

11.375" Length 

22.50 

63.50 

Thread Sizes 

Model Inlet Outlet Dimensions Wt. Lbs. 

X-86A 

B-96A 

2940GA 

12.5" Height 

6.25" Length 

12.75" Length 

5.50 

6.375 

27.5 

2.5" F 

2.5" F 

4.5" or 5.0" F 

4.0" or 5.0" Storz 

2.5" M 

2.5" M 

4.0" or 5.0" Storz; 3.5", 4.0" or 4.5" F; 

3.5", 4.0" or 4.5" M 

Hydrant and Suction Intake Valves


Apparatus Valves 

2891-01-30-F 

2800 Series Hydro-Loc ® Valves 

Features: 

• Rugged, Cast Brass Construction 

• Self-Locking Mechanism 



• Full Flow Waterway 

• Two Handle Options 

“D” Handle for Remote Operation 

“F” Handle for Direct Operation 

• Twelve Handle Position Options* 

• Over 80 End Cap Options 

• Original Drop-Out Design (Swing-out if Desired) 

• Each Valve Tested to Meet NFPA 1901 Standards 

• Available in 1.5", 2.0", 2.5" and 3.0" Sizes 

Benefits: 


• Safe and Efficient Operation 

• Separate Locking Mechanism not Needed 

• Applicable for Most Installations 

• Use as Inline, Suction, or Discharge 

• Easy Field Service–Drop-out or Swing-out 


2892-01-11-F 

2891-01-01-D 

2891 1.5" Hydro-Loc ® Apparatus Valve 

Rugged, cast brass construction • Full flow 1.5" waterway • Adjustable, teflon impregnated neoprene 

seat • Hydraulically balanced acetal ball • Self-locking mechanism • Swing-out or drop-out for field 

service • Choose from 10 optional end caps (see pages 52-54) • Available with “D” handle or “F” 

handle • Finish cast brass • Weight (2891-01-01-D), 6.562 lbs. 

2896-01-35-F 

2892-01-01-D 





handle • Finish cast brass • Weight (2892-01-01-D), 9.5 lbs. 

2896-01-01-D 





handle • Use with RC-10 (see page 57) for slow-close valve • Finish cast brass • Weight (2896-01- 

01-D), 17.375 lbs. 

2893-14-01-F 


Rugged, cast brass construction • Full flow 3.0" waterway • Adjustable, teflon impregnated 

neoprene seat • Hydraulically balanced acetal ball • Self-locking mechanism • Swing-out or drop-out 

for field service • Choose from 33 optional end caps (see pages 52-54) • Available with “D” handle or 

“F” handle • Use with RC-10 (see page 57) for slow-close valve • Finish cast brass • Weight (2893- 

01-01-D), 22.25 lbs. 

2893-01-01-D 


Ordering valves from these two pages is easy as 1-2-3! 

Step #1 — Select valve size by model number 

Step #2 — Select inlet and outlet end caps 

Step #3 — Select handle option* 

How to Order 800 and 2800 Series Valves 

Step 1 Step 2 Step 3 

Model Inlet Outlet Handle 

Number End Cap End Cap 

890 

2891 

892 

– 01 

– 01 

– 01 

– 01 

– 30 

– 11 

– D 

– F 

– E 


Model Inlet Outlet Handle 


896 

2893 

W-893 

– 40 

– 25 

– 00 

– 40 

– 98 

– 60 

– D 

– F 

– D 

* HANDLE POSITION CHART ON PAGE 54. IF HANDLE POSITION IS NOT SPECIFIED, POSITION #3 WILL BE FURNISHED.


800 Series Valves 

Features: 

• Rugged, Cast Brass Construction 



• Full Flow Waterway 

• Three Handle Options 

“D” Handle for Remote Operation 

“E” Handle for Direct Operation 

“F” Handle for Direct/Locking Operation 

• Twelve Handle Position Options* 

• Over 80 End Cap Options 

• Original Drop-Out Design (Swing-out if Desired) 

• Each Valve Tested to Meet NFPA 1901 Standards 

• Available in 1.0", 1.5", 2.0", 2.5" and 3.0" Sizes 

Benefits: 



• Compatible with RC-1 for Remote Locking Operation 



• Easy Field Service–Drop-out or Swing-out 



890 1.0" Apparatus Valve 

Full flow 1.0" waterway • Choose from 3 optional end caps (see pages 52-54) • Available with either “D” handle 

(remote) or “E” handle (direct) • Finish cast brass • Weight (890-01-01-D), 3.625 lbs. 

890-01-01-D 


Full flow 1.5" waterway • Choose from 10 optional end caps (see pages 52-54) • Available with either “D” 

handle (remote) or “E” handle (direct) • Finish cast brass • Weight (891-01-01-D), 6.562 lbs. 

891-01-01-D 



handle (remote) or “E” handle (direct) • Finish cast brass • Weight (892-01-01-D), 9.5 lbs. 

892-01-01-D 



handle (remote), “E” non-locking handle (direct) or “F” locking handle direct • Use with RC-10 (see page 57) 

for slow-close valve • Finish cast brass • Weight (896-01-01-D), 17.375 lbs. 

896-01-01-D 



handle (remote), “E” non-locking handle (direct) or “F” locking handle direct • Use with RC-10 (see page 57) 

for slow-close valve • Finish cast brass • Weight (893-01-01-D), 22.25 lbs. 

893-01-01-D 

W-893 Special 3.0" Tank-to-Pump Valve 

Full flow 3.0" waterway • Flanged end (8-bolt) mounts directly to suction side of Waterous pump • Disc available 

on flanged end (please specify) • Opposite end is furnished with a #60 end cap (4° pitch upward) for use with 

3.5" ID flexible hose • Furnished with “D” handle • Use with RC-10 (see page 57) for slow-close valve • Finish 

cast brass • Weight, 20.75 lbs. 

Elk-O-Lite ® Apparatus Valves 

2925A Elk-O-Lite ® Apparatus Valve 

Durable, lightweight Elk-O-Lite construction • Ideal for use on elevated platforms • Full flow 2.5" waterway • 

Self-locking mechanism • Dual neoprene seats with acetal ball • Swing-out or drop-out for field service • 

Choose from 4 end cap options: #01 (2.5" NPT female); #10 (2.5" swivel female); #30 (2.5" male); and #38 

(2.5" male on 90° elbow) • Furnished with #80 handle for direct operation • Finish hard anodized • Weight, 

6.375 lbs. 2925A-10-38-80 

W-893 

Apparatus Valves


Electrically Actuated Apparatus Valves 


Features: 

• Rugged Cast Brass Construction* 

• UHMWPE Valve Seats* 

• Acetal Valve Balls (All but 4.0")* 

• Weathertight, Sealed Gearcase 

• Segmental Gear Constructed of Aluminum/Bronze 

• Polished, Hardened Steel Worm Gear with 

Stainless Steel Shaft 

• Precision Needle Thrust Bearings 

• Gear Ratio 38:1 

• Rugged, Positive Travel Limit Stops 

• Sealed, High Torque 12V Motor/3 Amp Draw 

• Control Module and Switch/Indicator Module 

Encased in Epoxy 

• Wiring Harnesses with Watertight Locking Connectors 

• Incandescent Indicator Lamps 

• Brushed Metal, Engraved Escutcheon Plate 

• Manual Override in Event of Power Failure 

• Over 90 End Cap Options (Pages 52-54)* 

Benefits: 


• Conforms to NFPA 1901 for Slow-Closing 




• Easy Field Service – Drop-out or Swing-out 


Switch/Indicator Module 

2915E-01-03-91 

2915E 1.5" Electrically Actuated Ball Valve 

Full flow 1.5" waterway • Dual UHMWPE seats • Acetal ball • Choose from 10 optional end caps (see 

pages 52-54) • Finish cast brass • Weight, 15.25 lbs. 

2920E 2.0" Electrically Actuated Ball Valve (Not Shown) 

Full flow 2.0" waterway • Dual UHMWPE seats • Acetal ball • High speed option for use with 

Sidewinder (please specify) • Choose from 11 optional end caps (see pages 52-54) • Finish cast 

brass • Weight, 18.875 lbs. 




2925E-20-35-91 


2930E-25-13-91 




Typical Installation 

*Does not apply to butterfly valves.



These electrically actuated, ball valves and butterfly valves allow the pump operator to easily and efficiently 

control the flow of the fire pump from his/her position at the pump control panel. With the vast number 

of optional end caps available, these valves can be utilized for discharge, suction or inline application. 

Each valve is furnished with the following electrical package: One (1) Valve Control Module encased in 

epoxy; One (1) Harness for Valve-to-Control Module (available in 5 lengths – see How to Order); One (1) 

Harness for Control Module-to Switch Indicator (available in in 4 lengths – see How to Order); One (1) 

Harness for Control Module-to-Power Source (6.0"); and One (1) sealed Switch Indicator Module with 

brushed metal, engraved escutcheon plate and three incandescent lamps. Red indicates fully closed; green 

is fully open; and yellow indicates a gated position. The incandescent lamps allow for a wide viewing 

angle, even in bright sunlight. 

2940E 4.0" Electrically Actuated Ball Valve (Not Shown) 

Bolts directly to waterous pump • Full flow 4.0" waterway • Single UHMWPE seat • Brass 

ball • Choose from 8 optional end caps (see pages 52-54) • Finish cast brass • Weight, 

36.875 lbs. 


W2940E 4.0" Electrically Actuated Ball Valve 

Full flow 4.0" waterway • Single UHMWPE seat • Brass ball • Choose from 8 optional end 

caps (see pages 52-54) • Finish cast brass • Weight, 15.25 lbs. 

2953E 3.0" Electrically Actuated Butterfly Valve (Not Shown) 

Rugged, cast iron construction • Wafer fits between two 3.00" - 150# ANSI flanges • 

Aluminum/bronze disc with reinforced EPDM seat (bi-directional) • Two-piece stainless 

steel stem • Cast finish • Weight, 18.75 lbs. 


Same as 2953E except 4.0" • Fits between two 4.00" - 150# ANSI flanges • Weight, 

23.625 lbs. 

W2940E-00-01-91 

2955E 5.0" Electrically Actuated Butterfly Valve 

Same as 2953E except 5.0" • Fits between two 5.00" - 150# ANSI flanges • 



Same as 2953E except 6.0" • Fits between two 6.00" - 150# ANSI flanges • 


How to Order Electrically Actuated Valves 

Ordering electrically actuated valves is easy as 1-2-3-4! 



Step #3 — Select harness (Valve to control module); 

60" (36793300); 

120" (36793500); 

240" (36793600); 

360" (36793700); or 

480" (36793800) 

Step 1 Step 2 Step 3 Step 4 

Model Inlet Outlet Harness No. Harness No. 


2915E 

2930E 

W2940E 

– 01 

– 24 

– 00 

– 01-91* 

– 13-91* 

– 50-91* 

w/36793300 and 36779200 

w/36793500 and 36779100 

w/36793300 and 36779300 

*Indicates complete system included. 

Note: Gearcase/motor position chart on page 54. If not specified, 

position #4 will be furnished. 

Step #4 — Select harness (Control Module to switch/indicator); 

12" (36779100); 

36" (36779200); 

60" (36779300); or 

120" (36779500) Electrical package furnished with each valve. 

2955E-00-00-91 

Electrically Actuated Apparatus Valves


Gear Actuated Apparatus Valves 

2925G-01-01-92 

Features: 

• Rugged Cast Brass Construction* 

• Conforms to NFPA 1901 for Slow-Closing 

• UHMWPE Valve Seats* 

• Acetal Valve Balls (All but 4.0")* 

• Weathertight, Sealed Gearcase 

• Segmental Gear Constructed of Aluminum/Bronze 

• Polished, Hardened Steel Worm Gear with 

Stainless Steel Shaft 

• Precision Needle Thrust Bearings 

• Gear Ratio 38:1 

• Rugged, Positive Travel Stops 

• Polished Handwheel with Sleeve 

• Weather-Sealed U-Joints for Drive Shaft 

• Over 70 End Cap Options* 

• Optional Valve Position Indicator Kit 

Benefits: 


• Complies with NFPA 1901 for Slow-Closing 



• Mount Switch/Indicator Anywhere 

• Easy to Install 


• Easy Field Service – Drop-out or Swing-out 


2920G 2.0" Gear Actuated Ball Valve (Not Shown) 

Full flow 2.0" waterway • Dual UHMWPE seats • Acetal ball • Choose from 10 optional end caps (see pages 

52-54) • Furnished with 5.0" polished chrome remote handwheel, two weather-sealed U-Joints and one (1) 

thru-the-panel bushing • Optional with Valve Position indicator Kit (see next page) • Optional with handwheel 

mounted to valve (please specify) • Finish cast brass • Weight, 17.50 lbs. 

2925G 2.5" Gear Actuated Ball Valve 





2930G-01-60-90 







2940G-29-50-90 


Full flow 4.0" waterway • Single UHMWPE seat • Brass ball • Choose from 8 optional end caps (see pages 




How to Order Gear Actuated Valves 

Ordering gear actuated valves is easy as 1-2-3! 



Step #3 — Select handwheel option; 

#90 for Handwheel and Bushing (Standard) 

#92 for Handwheel, Bushing, and 

Valve Position Indicator Kit 

#94 for Handwheel mounted to valve 


Model Inlet Outlet Handwheel 


2925G 

2930G 

2940G 

2955G 

– 01 

– 53 

– 29 

– 00 

– 01 

– 60 

– 52 

– 00 

– 90 

– 92 

– 92 

– 90 

Note: Gearcase/motor position chart on page 55. 

If not specified, position #4 will be furnished. 

*Does not apply to butterfly valves.



These gear actuated, ball valves and butterfly valves conform to the requirements of NFPA 1901 regarding 

slow closing valves.They allow the pump operator to safely and efficiently control the flow of the fire pump 

by utlizing handwheel driven worm gears to actuate the valves. Each valve is furnished with a remote 

handwheel complete with the necessary U-Joints and bushing for the thru-the-panel installation. There is 

an optional Valve Position Indicator which allows the operator to see instantly if the valve is fully open, 

fully closed or in a gated position. With the vast number of optional end caps available, these valves can be 

used for discharge, suction or inline application. 

2954G 4.0" Gear Actuated Butterfly Valve 

Rugged, cast iron construction • Wafer fits between two 4.0" - 150# ANSI flanges • Aluminum/bronze disc 

with reinforced EPDM seat (bi-directional) • Two-piece stainless steel stem • Furnished with 6.5" polished 

chrome remote handwheel, two (2) weather-sealed U-Joints and one (1) thru-the-panel bushing 

• Optional with Valve Position indicator Kit (see next page) • Optional with handwheel mounted to 

valve (please specify) • Cast finish • Weight, 22.50 lbs. 


2955G 5.0" Gear Actuated Butterfly Valve (Not Shown) 

Same as 2954E except 5.0" • Fits between two 5.0" - 150# ANSI flanges • Weight, 26.25 lbs. 

2945G-00-00-90 

2956G 6.0" Gear Actuated Butterfly Valve (Not Shown) 

Same as 2954E except 6.0" • Fits between two 6.0" - 150# ANSI flanges • Weight, 32.875 lbs. 

Valve Position Indicator Kit 

This optional Valve Position Indicator Kit allows the pump operator to see the position of each gear operated 

valve at a glance; Red indicates fully closed; Green indicates fully open; and Yellow indicates a gated 

position • Incandescant lamps for reliable signal and wide viewing angle even in bright sun • Solid state 

position sensors are water and lubricant resistant • Integrated circuit board and lamp sockets completely 

encased in epoxy for total protection from elements • Harnesses have watertight locking connectors • 

Attractive, brushed metal, engraved escutcheon plate will fit into any pump panel decor. To order VPI kit with 

valve, add suffix #92 to valve model number; i.e., 2925G-01-01-92. 


Gear Actuated Apparatus Valves



End Cap Options for 800, 2800, and 2900 Series Valves 

All three valve series can be utilized as inline, suction, or discharge valves with virtually any fire pump. Choose any of these end cap options 

to make up the valve combination that best fits your individual needs. 

All dimensions shown in charts, unless otherwise noted, are the length (L) of the end cap. 

All end caps for the 1.0", 1.5", 2.0" 2.5", and 4.0" valves have 4 bolts. 

End caps for the 3.0" valves have 6 bolts. 

6 Bolt 

4 Bolt 

Male Hose Thread End Caps 

End Cap 

No. 

30 31 32 33 34 

Valve 

Size 

1.5" 

2.0" 

2.5" 

3.0" 

1.187" L 

+ 

1.375" L 

+ 

1.750" L 

+ 

1.937" L 

+ 

1.562" L 

(2.5" Thd) 

++ 

1.812" L 

(3.0" Thd) 

++ 

2.625" L 

(3.5" Thd) 

++ 

2.750" L 

+ 

2.000" L 

+ • 

4.000" L 

+ 

4.125" L 

+♥ 

3.000"L 

(2.5"Thd) 

++ 

4.125" L 

(3.5" Thd) 

++♥ 

Male Hose Thread End Caps 

End Cap 

No. 

35 36 37 37.1 

96 

+ Thread size same as valve size. 

++ Thread size larger than valve size. 

+++ Thread size smaller than valve size. 

♥ Has two .750" NPT drain taps. 

• No plugs in this end cap. 

Valve 

Size 

2.5" 

3.0" 

4.0" 

5.000" L 

+ 

6.187" L 

+♥ 

7.016" L (45°) 

+ 

6.724" L 

(2.5" Thd) 

+++• 

8.922" L 

+ 

12.312" L 

+ 

1.750" L 

+ 

Male NPT End Caps 

End Cap 

No. 

40 41 42 

43 44 

Victaulic, Solder & Flex Hose End Caps 

50 51 52 55 

09 60 


Valve 

Size 

1.5" 

2.0" 

2.5" 

3.0" 

4.0" 

1.375" L 

+ 

1.625" L 

+ 

1.937" L 

+ 

2.625" L 

+ 

2.687" L 

+ 

1.937" L 

(2.5" Thd) 

++ 

2.078" L 

(3.0" Thd) 

++ 

2.625” L 

(3.5" Thd) 

++ 

2.625" L 

(4.0" Thd) 

++ 

2.000" L 

+ • 

3.000"L 

+ 

5.000" L 

+ 

1.625" L 

(1.5" VIC) 

1.625" L 

(2.0" VIC) 

1.750" L 

(2.5" VIC) 

1.937" L 

(3.0" VIC) 

2.063" L 

(4.0" VIC) 

1.937" L 

(3.0" VIC) 

1.750" L 

(4.0" VIC) 

3.000" L 

(2.0" VIC) 

2.750" L 

(2.5" VIC) 

3.531" L 

(3.0" VIC)♥ 

3.563" L 

(4.0" VIC) 

A=3.375" 

B=3.187" 

A=3.687" 

B=4.750" 

1.125" L 

(SOLDER) 

1.062" L 

(SOLDER) 

1.750" L 

(SOLDER) 

1.625" L 

(SOLDER) 

1.963" L 

(3.5" O.D.) 

(4° PITCH)



Flange End Caps 

Valve 

Size 

End Cap 

No. 

1.5" 

2.0" 

20 20 20.1 20.2 

21 

1.750" L 

★★★ 

2.750" L 

W or H 

++++ 

2.750" L 

W or H 

++++ 

6.670" L 

4.850" L 

2.125" L 

Designations for pump flanges: 

2.5" 

W or H 

W or H 

W or H 

++++ 

++++ 

++++ 

D = Darley Pump 

2.312" L 2.312" L 

H = Hale Pump 

3.0" 

H 

★★★★ 

W = Waterous Pump 

++++ 


+ Flange has 4.594" bolt circle. End Cap 22 22 22.1 

23 94 53 

++ Flange has 5.750" bolt circle. 

No. 

+++ Flange has 5.500" bolt circle. 

++++ Flange has 4.375" bolt circle. 

Valve 

★ Flange has 6.625" bolt circle. 

Size 

★★ Flange has 7.778" bolt circle. 

★★★ Flange has 3.000" bolt circle. 

2.125" L 

2.563" L 

2.5" 

D 

2.5" - 150# 

★★★★ Flange has 4.250" bolt circle. 

+ 

(ANSI) 

• Offset .547" (10.8") 

♥ Elbow 94 

2.312" L 2.312" L 

2.500" L 

o 

3.0" 

H 

D 

W 

++ + 

★ 

.750" L 

W 

★★ 

54 

2.675" L 

W (4° Pitch) 

+++ 



End Cap 

No. 

24 25 

26 27 28 29 

29.1 

Valve 

Size 

2.0" 

2.5" 

3.0" 

4.0" 

A B A B 

3.750" 5.500" 

W or H 

++++ 

6.000" 5.500" 

W or H 

++++ 

6.000" 4.438" 

W or H 

++++ 

5.500" 9.500" 

W, H 

++, +++♥ 

6.000" 3.500" 

W or H 

++++ 

6.000" 2.438" 

W or H 

++++ 

8.093" L 

W or H 

++++• 

6.093" L 

W or H 

++++• 

6.000" L 

W or H 

++++• 

6.093" L 

W or H 

++++• 

5.500" L 

W or H 

++++• 

2.312" L 

W 

+++ 

2.687" L 

W 

+++ 

2.687" L 

H 

++ 

Apparatus Valves




Female Hose Thread Swivel End Caps 

Valve 

Size 

End Cap 

No. 

1.5" 

2.0" 

2.5" 

3.0" 

4.0" 

End Cap 

No. 

10 11 19 12 13 14 17 15 16 18 

98 

1.766" L 

+ 

2.297" L 

+ 

2.578" L 

+ 

2.297" L 

(2.5" Thd) 

++ 

2.437" L 

(3.0" Thd) 

++ 

2.859" L 

(2.5" Thd) 

+++ 

Female NPT End Caps 

01 

3.203" L 

+ 

4.922" L 

+ 

4.562" L 

+♥ 

5.062" L 

(3.0" Thd) 

++ 

5.172" L 

(3.5" Thd) 

++♥ 

4.422" L 

(2.5" Thd) 

+++♥ 

4.611" L 

(3.5" Thd) 

+++ 

7.297" L 

+ 

7.437" L 

(3.0" Thd) 

++ 

7.933" L 

(45°) 

+ 

02 03 04 

05 

95 

97 

6.219" L 

+♥ 

Valve 

Size 

1.5" 

.969" L 

+ 

2.0" 

1.062" L 

+ 

2.5" 

1.937" L 

+ 

3.0" 

1.625" L 

+ 

4.0" 

2.050" L 

+ 

+ Thread size same as valve size. 

++ Thread size larger than valve size. 

+++ Thread size smaller than valve size. 

1.469" L 

(2.0" Thd) 

++ 

1.625" L 

(2.5" Thd) 

++ 

2.078" L 

(3.0" Thd) 

++ 

2.625" L 

(3.5" Thd) 

++ 

Optional Handle Positions 

(800 and 2800 Series) 

2.000" L 

+• 

3.000" L 

+ 

4.000" L 

+ 

4.125" L 

+♥ 

3.291" L 

+■ 

♥ Has two .750" NPT Drain Taps. 

• .125" NPT plug and no .750" plug. 

■ .750" NPT plug and no .250" plug. 

4.000" L 

(3.0" Thd) 

++ 

4.125" L 

(3.5" Thd) 

++♥■ 

4.500" L 

(4.0" Thd) 

++♥ 

1.937" L 

+• 

Optional Gear/Motor Positions 

(2900 Series) 

1.250" L 

+ 


Standard 

Inlet 

Inlet 

Standard 

Inlet 

Inlet


Dimensions for 800 and 2800 Series Valves 




This style applies to 

Model #890, #891 

and #892 Valves. 

This style applies 

to Model #2891, 

#2892, #2896 and 

#2893 Valves. 

This style applies to 

Model #896 and 

#893 Valves only. 

Size 

1.00" 

1.50" 

2.00" 

2.50" 

3.00" 

Model 

890 

— 

891 

2891 

892 

2892 

896 

2896 

893 

2893 

Body 

Width 

1.75" 

— 

2.50" 

2.50" 

3.00" 

3.00" 

3.375" 

3.375" 

4.234" 

4.234" 

“D” 

3.50" 

— 

3.50" 

3.50" 

3.50" 

3.50" 

6.75" 

6.75" 

6.75" 

6.75" 

Handles 

“E” 

3.875" 

— 

3.875" 

— 

3.875" 

— 

8.00" 

— 

8.00" 

— 

“F” 

— 

— 

— 

4.312" 

— 

4.312" 

8.00" 

8.00" 

8.00" 

8.00" 

Dimensions for 2900 Series Valves 

Bolt Centers 

Model 

2915 

2920 

2925 

2930 

2940 

Size 

1.5" 

2.0" 

2.5" 

3.0" 

4.0" 

Body 

Width 

2.50" 

3.00" 

3.39" 

4.23" 

4.77" 

Height 

4.63" 

4.88" 

5.16" 

6.00" 

6.31" 

#90 

N/A 

N/A 

— 

6.82" 

6.82" 

Actuator Length 

#91 

6.38" 

6.38" 

6.38" 

8.50" 

8.50" 

#92 

N/A 

N/A 

— 

6.82" 

6.82" 

Size 

1.5" 

2.0" 

2.5" 

3.0" 

4.0" 

End Cap End Cap 

Bolt Centers Bolt Pattern 

3.50" 4 Bolt 

4.19" 4 Bolt 

5.06" 4 Bolt 

6.00" 6 Bolt 

7.25" 4 Bolt 

Apparatus Valves


Apparatus Fittings and Accessories 


RC-1 Locking Remote Control Unit 

A push-pull control for the operation of 

in-line, quarter turn ball valves or built-in 

eductors • Locks in any position for safe, 

positive gating • Control unit is furnished with special “Tee” handle that allows user to attach an 

identification/location label as an insert within the handle body • “Tee” handle and escutcheon plate 

are chrome plated cast brass • Rod is anodized aluminum extrusion • Unit furnished with two (2) ball 

joint swivel connectors for use with .500-20 threaded rod (supplied by customer) • Maximum travel 

of rod is 11.00" • Installs through 1.9060" diameter opening in pump panel • Length, 11.375" • 


RC-2 Piggy-Back Remote Control Unit 

Designed for operating discharge valves on the opposite side of apparatus from pump control panel • 

Twist-lock handle for use with 800 series valves only • Cast brass construction with stainless steel 

handle rod • Specify with “A” or “B” handle (see drawing below) • Length, 8.00" • Weight, 6.00 lbs. 

RC-3 Piggy-Back Remote Control Unit 

Designed for operating discharge valves on the opposite side of apparatus from pump control panel • 

Handle for use with 2800 series valves only • Cast brass construction with stainless steel handle rod 

• Specify with “A” or “B” handle (see drawing below) • Length, 8.00" • Weight, 6.00 lbs. 

RC-4 Top-Mount Remote Control Unit 

Designed for operating valves from top-mounted operators panel • Control handle positioned 90° 

from remote handle • Additional pre-drilled hole for setting control handle at 135° • Cast brass construction 

with stainless steel handle rod • Available with 3.5" or 5.0" remote handle (please specify) • 

Pedestal has 3 hole mounting pad • Length, 11.50" • Weight, 5.50 lbs. 


RC-6 Top-Mount Remote Control Unit 

Designed for operating valves from top-mounted operators panel • Control handle positioned 135° 

from remote handle • Additional pre-drilled holes for setting control handle at 90° or 180° • Cast 

brass construction with stainless steel handle rod • Available with 3.5" or 5.0" remote handle (please 

specify) • Pedestal has 3 hole mounting pad • Length, 11.50" • Weight, 5.50 lbs. 

RC-7 Non-Locking Remote Control Rod Unit 

A push-pull control for the operation of in-line, quarter turn ball valves or built-in eductors • Control 

unit is furnished with special “Tee” handle that allows user to attach an identification/location label 

as an insert within the handle body • “Tee” handle is chrome plated cast brass • Rod is anodized 

aluminum extrusion • Furnished with 775-11 rod guide (see page 51) • Installs through 1.00" 

diameter opening in pump panel • Available in three (3) lengths of rod travel; 7.31", 9.75", and 

11.25" (please specify) • Weight, 1.50 lbs.


Apparatus Fittings and 

Accessories 

RC-10 “Slow-Closing” Valve Control 

The perfect answer for slow-closing remote actuation of 

any ball valve (even the competition’s valve) • Linear output screwtype 

actuator allows easy and reliable compliance with NFPA 1901 as it pertains 

to slow-closing valves • Actuator and push-rod constructed of durable, lightweight 

extruded alloys • Precision needle thrust bearing and hardened thrust washers assure smooth, 

efficient operation • 5.0" cast alloy handwheel with collet-type connection allows for easy, compact thru-thepanel 

installation • Furnished with threaded (.500-20), ball swivel joint at end of drive rod • Ideal for new 

installations or retro-fitting with existing valves • Installs through 1.031" diameter opening in pump panel • 

Satin finish • Length, 16.375" (retracted); 21.375" (extended) • Weight, 3.15 lbs. • Optional Valve Status 

Indicator Module (please specify) allows the pump operator to immediately determine the status of the valve; 

RED indicates fully closed; GREEN indicates fully open; and YELLOW indicates a gated position • Incandescent 

bulbs provide a reliable signal with a wide viewing angle even in bright sunlight • Integrated circuit board and 

lamp sockets are completely encased in epoxy for total protection from the elements • Reliable solid state 

position sensors • Wiring harnesses (furnished) have sealed locking connectors for easy installation with chassis 

wiring • Brushed aluminum escutcheon plate with black trim. 

471 (Front) 


471 Underwriters Test Plug Adapter 

For testing pressure and vacuum on pumpers • Remove hex head plugs and thread in gauges • Aluminum body 

with black face plate and aluminum lettering • Length, 4.00" • Weight, .313 lbs. 

471 (Back) 

S-320 Running Board Holder 

For mounting nozzles and accessories on the running board or in a compartment • Male hose thread only • Cast 

brass construction • Available in sizes from .750" to 6.00" • Cast finish or chrome plated • Weight (2.5" size), 

.75 lbs. 

653 2.5" Tri-Loc Nozzle Holder 

For mounting nozzle and accessories on the running board or in a compartment • Positive grip • One hand 

release • For any 2.5" hose thread except NPSH • Brass construction • Finish chrome plated • Diameter, 5.00" • 


L-653 1.5" Tri-Loc Nozzle Holder (Not Shown) 

For mounting nozzles and accessories on the running board or in a compartment • Positive grip • One hand 

release • For any 1.5" hose thread except NPSH • Brass construction • Finish chrome plated • Diameter, 5.00" • 


775-5 Valve Control Handle 

Cast brass handle for remote control of screw type gate valve or gear driven valve • Bored for .375" rod • 

Finish chrome plated • Diameter, 4.00" • Weight, 1.00 lbs. 

775-11 Remote Control Rod Guide 

Cast brass fitting for centering and guiding remote control rod • Nylon sleeve for .50" rod • Finish chrome plated 

• Diameter, 1.50" • Weight, .188 lbs. 

775-15 Remote Control “Tee” Handle 

Cast Brass “Tee” handle for use with push-pull control rods to remotely operate in-line, quarter turn ball valves 

or built-in eductors • Design allows user to attach an identification/location label as an insert within the handle 

body (.75" x 2.50") • Bored for .500" rod • Can be threaded .500" - 13 or .500" - 20 (please specify) • Finish 

chrome plated • Height, 1.063" • Weight, .50 lbs. 

Apparatus Fittings and Accessories




105 Apparatus Elbow (45°) 

348 1.5" Free-Swiveling 90° Discharge Elbow 

Cast brass elbow used to relieve stress due to weight of suction or 

discharge hose when connected to apparatus • Complies with NFPA 

1901 • Female rocker lug swivel inlet • Rigid male outlet • See available 

sizes in chart on next page • Finish chrome plated. 

Rugged, cast brass discharge elbow for use with pre-connected 1.5", 1.75", or 2.0" crosslays • Free 

swivel female NPT inlet • Male outlet with either NHT or NPT • Single ball race with bronze balls • 

See available sizes in chart on next page • Finish cast brass. 

348-L 1.5" Free-Swiveling 90° Discharge Elbow 

Rugged, cast brass discharge elbow for use with pre-connected 1.5", 1.75", or 2.0" crosslays • 

Slightly longer than 348-1.5" (see chart) • Free swivel female NPT inlet • Male NHT outlet • Single 

ball race with bronze balls • Finish cast brass. 

348-M 1.5" Free-Swiveling 90° Discharge Elbow (Not Shown) 

Rugged, cast brass discharge elbow for use with pre-connected 1.5", 1.75", or 2.0" crosslays • 2.0" 

NPT free swivel female inlet with cast bracket for stud mount to apparatus (.375-16 tap) • 1.5" NHT 

rigid male outlet • Single ball race with bronze balls • Finish cast brass. 

348-ML 1.5" Free-Swiveling 90° Discharge Elbow 

Rugged, cast brass discharge elbow for use with pre-connected 1.5", 1.75", or 2.0" crosslays • 

Slightly longer than 348-M (see chart) • 2.0" NPT free swivel female inlet with cast bracket for stud 

mount to apparatus (.375-16 tap) • 1.5" NHT rigid male outlet • Single ball race with bronze balls • 

Finish cast brass. 

348 2.5" Free-Swiveling 90° Discharge Elbow 

Rugged, cast brass discharge elbow for use with pre-connected 2.5" or 3.0" crosslays • 2.5" NPT free 

swivel female inlet • 2.5" NHT male outlet • Double ball race with bronze balls • Finish cast brass. 


348-M 2.5" Free-Swiveling 90° Discharge Elbow 

Rugged, cast brass discharge for use with pre-connected 2.5" or 3.0" crosslays • 2.5" NPT free swivel 

female inlet with either a cast bracket for stud mount or a flange bracket for mounting to apparatus • 

2.5" NHT male outlet • Double ball race with bronze balls • Finish cast brass. 

348 4.0" Free-Swiveling 90° Suction Elbow 

Rugged, cast brass elbow for auxiliary front suction inlet or LDH discharge • Twist lock mechanism 

holds elbow in place when positioned • Double ball race with bronze balls • 4.0" NPT free swivel 

female inlet • 4.0" NPT or 4.0" NHT male outlet • Finish cast brass with chrome 

plated trim.




Rugged, cast brass elbow for auxiliary front suction inlet • Twist lock mechanism 

holds elbow in place when positioned • Double ball race with bronze balls • 5.0" NPT 

free swivel female inlet • 5.0" NHT male outlet with strainer • Finish cast brass with 

chrome plated trim. 


Rugged, cast brass elbow for auxiliary front suction inlet • Twist lock mechanism 

holds elbow in place when positioned • Double ball race with bronze balls • 5.0" NPT 

free swivel female inlet • 6.0" NHT male outlet with strainer • Finish cast brass with chrome plated trim. 

348A 6.0" Elk-O-Lite ® 90° Suction Elbow (Not Shown) 

Durable lightweight Elk-O-Lite construction • 6.0" LH swivel inlet • 6.0" NHT male outlet with strainer 

• 5.0" waterway • Cast finish. 


418 Suction Adapter 

Rugged, cast brass, internal-lug adapter with removable strainer for suction intake of pump • One piece 

adapter has NPT female and hose thread male • See available sizes in chart below • Finish chrome plated. 

418-L Discharge Adapter (Long) 

Rugged, cast brass, internal-lug adapter for discharge outlet • 2.5" NPT female • 2.5" hose thread male • Finish 

chrome plated. 

418-S Discharge Adapter (Short) 

Rugged, cast brass, internal-lug adapter for discharge outlet • 2.5" NPT female • 2.5" hose thread male • Finish 

chrome plated. 

418-SA Elk-O-Lite ® Discharge Adapter (Short) 

Durable, extruded Elk-O-Lite, rocker lug adapter for discharge outlet • 2.5" NPT female • 2.5" hose thread male 

• Finish hard anodized 

419 Suction Adapter 

Rugged, cast brass, internal-lug, suction adapter with strainer • Two piece construction (rigid female NPT x swivel 

female hose thread) • See available sizes in chart below • Finish chrome plated. 

Thread Sizes 

Wt. 

Model Inlet Outlet Length Lbs. 

105 

348-1.5" 

348-1.5" 

348-L 

348-L 

348-M 

348-ML 

348-2.5" 

348-4.0" 

348-5.0" 

348-6.0" 

348A-6.0" 

2.50" Female Swivel 





1.50" NPT Female Swivel 










6.0" LH Female Swivel 

2.50" Male 

3.00" Male 

2.50" Male 

3.00" Male 

3.50" Male 

1.50" Male 

1.50" Male 

1.50" Male 

1.50" Male 

1.50" Male 

1.50" Male 

2.50" Male 

4.00" Male 

5.00" Male 

6.00" Male 

6.00" Male 

6.50" 

6.563" 

6.625" 

6.75" 

6.934" 

4.75" 

4.875" 

5.25" 

5.375" 

4.875" 

5.375" 

8.00" 

10.25" 

10.50" 

10.50" 

10.50" 

4.50 

4.563 

4.875 

5.50 

7.25 

2.875 

3.00 

3.50 

3.625 

3.25 

3.375 

11.75 

30.25 

45.00 

48.50 

14.25 

Thread Sizes 

Wt. 


418 

418-L 

418-S 

418-SA 

419 

3.00" NPT Female 
















3.00" Male 

4.00" Male 

4.50" Male 

5.00" Male 

6.00" Male 

4.50" Male 

5.00" Male 

6.00" Male 

5.00" Male 

6.00" Male 

2.50" Male 

2.50" Male 

2.50" Male 




2.875" 

3.250" 

3.375" 

3.375" 

3.563" 

3.375" 

3.50" 

3.563" 

3.50" 

3.50" 

3.625" 

2.625" 

2.375" 

2.625" 

3.75" 

3.875" 

4.50 

4.50 

4.563 

4.875 

5.50 

7.25 

2.875 

3.00 

3.50 

3.625 

3.25 

3.375 

11.75 

30.25 

45.00 

48.50 

Apparatus Fittings and Accessories




40-22 

40-32 

40-40 

40-41 

110 

114 

114B 


40 Relief Valve 

Designed primarily for use on the suction side of the pump • Complies with 

NFPA 1901 • Can also be installed on discharge side of the pump for a 

designated LDH outlet • Rugged, cast brass construction with stainless steel 

mechanism • Rubber seat to ensure positive vacuum seal • Fully 

adjustable from 75 to 250 psi (pre-set at 125 psi) • Male outlet 

either 2.5" NPT, 2.5" NHT or 2.5" Victaulic • Six inlet options: #10, 

2.5" NHT female swivel; #20, Flange for American, Hale, or 

Waterous pump; #22, Flange for Darley pump; #32, 2.5" NHT male; 

#41, 3.0" NPT male; and #40, 2.5" NPT male • Finish cast brass. 

110 .750" Push/Pull Drain Valve – Direct Pipe Mount 

Rugged, cast brass valve body with stainless steel handle rod • Pull to drain; push to close • .750" 

NPT female inlet • .750" NPT female outlet • Standard handle length 2.25" • Optional handle 

lengths: 4.375", 3.00", and 1.50" (please specify) • Finish cast brass. 

114 .750" Elk-O-Lite ® Twist-Type Drain Valve 

Compact drain valve for use on siamese and LDH appliances • Durable, lightweight Elk-O-Lite construction 

• Knurled knob for easy operation • Twist counter-clockwise to drain; twist clockwise to 

close • .750" NPT male inlet • Finish hard anodized. 

114B .750" Brass Twist-Type Drain Valve (Not Shown) 

Same as 114 except constructed of rugged, cast brass • Finish chrome plated. 

115 .750" Push/Pull Drain Valve – Panel Mount 

Rugged, cast brass valve body with stainless steel handle rod • Body pre-drilled for mounting 

to pump panel • Pull to drain; push to close • .750" NPT female inlet • Male shank outlet for 

attaching .750" ID drain hose • Standard handle length 2.25" • Optional handle lengths: 4.375", 

3.00", and 1.50" (please specify) • Finish cast brass. 

116 .750" Quarter-Turn Drain Valve – Panel Mount 

Rugged, cast brass valve body with stainless steel handle rod • Body pre-drilled for mounting to 

pump panel • Turn counter-clockwise to drain and clockwise to close • Machined brass ball • Dual 

seats made of UHMWPE • .750" NPT inlet • .750" NPT outlet • Optional inlet adapter with .125" 

NPT tap for gauge (please specify) • Finish cast brass. 

315 Barrel Suction Strainer 

Thread Sizes 

Wt. 


40-10 

40-20 

2.5" NPT Male or Victaulic 


6.313" 

6.75" 

11.125 

11.20 


Flange for American, Hale, 

or Waterous 

Flange for Darley 

2.5" NHT Male 

2.5" NPT Male 

3.0" NPT Male 

.75" NPT Female 

.75" NPT Male 

.75" NPT Male 






— 

— 

40-20 

Rugged all brass construction • Available with 2.5" thru 6.0" female base • Also available with 2.5" 

and 3.0" male base (please specify) • Rocker lugs standard • Pin lugs optional (please specify) • 

Complies with NFPA 1901 • Conforms to MIL-S-12165B, Type I • Finish chrome plated. 

315FN Barrel Strainer with Foot Valve 

Rugged all brass construction • Foot valve for holding water in suction hose while pump is being 

primed • Rigid female base 3.0" • Finish cast brass. 

6.125" 

6.75" 

6.50" 

6.125" 

5.25" 

2.50" 

2.50" 

40-41 

11.125 

10.875 

10.625 

10.933 

1.75 

.25 

.75 

Thread Sizes 

Wt. 


115 

116 

315 

315 

315 

315 

315 

315 

315 

315FN 



2.5" Female 

3.0" Female 

3.5" Female 

4.0" Female 

4.5" Female 

5.0" Female 

6.0" Female 

3.0" NHT Female 

.75" OD Male Shank 


— 

— 

— 

— 

— 

— 

— 

— 

5.50" 

4.80" 

8.875" 

9.00" 

9.25" 

15.25" 

15.25" 

15.25" 

15.25" 

14.50" 

1.125 

1.563 

3.50 

4.50 

6.25 

9.625 

10.50 

11.25 

12.50 

16.00


318 Brass Female to Male Adapter 

Rugged, cast brass adapter for 3.5" and larger sizes • Pin lug and HOSE THREADS ONLY • Finish cast brass or chrome plated. 

Sizes Available Sizes Available Sizes Available 

Female x Male Wt. Lbs. Female x Male Wt. Lbs. Female x Male Wt. Lbs. 

3.5" x 2.5" 4.50 4.5" x 2.5" 5.86 6.0" x 4.0" 8.31 

4.0" x 2.5" 4.81 4.5" x 4.0" 6.51 6.0" x 4.5" 9.25 

S-319 Brass Double Female Suction Adapter 

6.0" x 5.0" 12.21 

Rugged, cast brass adapter • Three piece construction with long handle swivels • For HOSE THREADS ONLY • 

Finish cast brass or chrome plated. 


Female x Female Wt. Lbs. Female x Female Wt. Lbs. Female x Female Wt. Lbs. 

4.5" x 2.5" 11.19 5.0" x 2.5" 12.37 6.0" x 2.5" 14.42 

4.5" x 4.5" 14.94 5.0" x 4.5" 15.22 6.0" x 4.5" 17.92 

A-327A Elk-O-Lite ® Female to Male Adapter 

Durable, lightweight Elk-O-Lite adapter • Rocker lug • Threads NHT ONLY • Finish hard anodized. 

Sizes Available 

Female x Male Wt. Lbs. 

2.5" x 1.5" .55 

A-327 Brass Female to Male Adapter 

Rugged, cast brass adapter • Rocker lug • For HOSE THREADS ONLY • Finish cast brass or chrome plated. 



1.5" x 1.5" .98 2.5" x 2.0" 1.55 3.0" x 2.5" 2.18 

1.5" x 2.5" 1.44 2.5" x 2.5" 1.65 3.0" x 3.0" 2.66 

2.5" x 1.5" 1.25 2.5" x 3.0" 2.31 

F-327A Elk-O-Lite ® Double Female Adapter 

Durable, lightweight Elk-O-Lite adapter • Three piece construction with rocker lug swivels • Threads NHT ONLY • Finish hard anodized. 



Female x Female Wt. Lbs. Female x Female Wt. Lbs. 

1.5" x 1.5" .875 2.5" x 2.5" 1.25 

F-327 Brass Double Female Adapter 

Rugged, cast brass adapter • Three piece construction with rocker lug swivels • For HOSE THREADS ONLY 

• Finish cast brass or chrome plated. 


Female x Female Wt. Lbs. Female x Female Wt. Lbs. Female x Female Wt. Lbs. 

1.5" x 1.5" 1.80 2.5" x 2.5" 4.20 3.0" x 3.0" 6.13 

M-327A Elk-O-Lite ® Double Male Adapter 

Durable, lightweight Elk-O-Lite adapter • Rocker lug • Threads NHT ONLY • Finish hard anodized. 



Male x Male Wt. Lbs. Male x Male Wt. Lbs. 

1.5" x 1.5" .25 2.5" x 2.5" .82 

M-327ABI Elk-O-Lite ® Double Male Adapter 

Same as M-327A except 2.5" NHT x 2.5" BRITISH INSTANTANEOUS • Finish hard anodized • Weight, .625 lbs. 

M-327 Brass Double Male Adapter 

Rugged, cast brass adapter • Rocker lug • For HOSE THREADS ONLY • Finish cast brass or chrome plated. 



Male x Male Wt. Lbs. Male x Male Wt. Lbs. 

1.5" x 1.5" .91 2.5" x 2.5" 1.88 

S-327 Brass Female to Male Adapter 

Rugged, cast brass adapter • Two piece construction with rocker lug swivel • For HOSE THREADS ONLY 

• Finish brass or chrome plated. 



2.5" x 1.5" 2.89 2.5" x 2.5" 3.57 3.0" x 2.5" 5.25 

435 Brass Universal Thread Adapter 

Rugged, cast brass construction • Adapts any 2.5" hose thread to 2.5" NHT • Ideal for use on damaged threads as well as 

bastard threads • Positive ratchet lock with thumb release • Finish chrome plated • Weight, 6.42 lbs. 

Hose and Suction Adapters 

Hose and Suction Adapters


Plugs, Caps and Hose Nipples 

310 Brass Rocker Lug Cap 

Rugged, cast brass rocker lug cap • Available in 1.0", 1.5", 2.0", 2.5", 3.0", 3.5", 4.0" 

and 4.5" sizes • For HOSE THREADS ONLY • Available with 9.0" or 16.0" chain at 

additional cost • Finish cast brass or chrome plated. 

310A Elk-O-Lite ® Rocker Lug Cap 

Durable, lightweight Elk-O-Lite rocker lug cap • Available 1.5" NHT or 2.5" NHT only 

• Available with 9.0" or 16.0" chain at additional cost • Finish hard anodized. 

310A Light Weight Storz Locking Cap 

Durable, lightweight Storz locking cap • Available 4.0" or 5.0" • Furnished with 18.0" vinyl-coated 

cable • Machine finish. 

310 Brass Long Handle Cap 

Rugged, cast brass cap with long handles • Conforms to NFPA 1901 for 500 psi service • Available in 

2.5". 4.0", 4.5", 5.0", and 6.0" sizes • For HOSE THREADS ONLY • Finish chrome plated. 

311 Brass Rocker Lug Plug 

Rugged, cast brass rocker lug plug • Available in 1.5", 2.5", and 3.0" sizes • For HOSE THREADS 

ONLY • Available with 9.0" or 16.0" chain at additional cost • Finish cast brass or chrome plated. 

311A Elk-O-Lite ® Rocker Lug Plug (Not Shown) 

Durable, lightweight Elk-O-Lite rocker lug plug • Available 1.5" NHT or 2.5" NHT only • Available 

with 9.0" or 16.0" chain at additional cost • Finish hard anodized. 

306 Brass Double Male Hose Nipple 

Rugged, cast brass nipple • For adapting from NPT to Hose Threads • Available only NPT one end and 

HOSE THREAD other end • See available sizes in chart below • Finish cast brass or chrome plated. 

3060 Brass Double Female Hose Nipple 



307 Brass Female to Male Nipple 



Plugs, Caps and Hose Nipples 

Model Size Length Wt. Lbs. Model Size Length Wt. Lbs. 

310 

310 

310 

310A 

310LH 

310LH 

310LH 

311 

311 

311 

311A 

1.5" 

2.5" 

3.0" 

2.5" 

4.0" 

5.0" 

6.0" 

1.5" 

2.5" 

3.0" 

2.5" 

1.125" 

1.50" 

1.625" 

1.50" 

1.75" 

1.50" 

1.625" 

1.75" 

2.00" 

2.125" 

2.25" 

.50 

1.25 

1.75 

.375 

4.50 

6.75 

7.50 

1.125 

1.125 

2.50 

.75 

306 

306 

306 

306 

3060 

3060 

307 

307 

307 

307 

1.0" x 1.0" 

1.5" x 1.5" 

2.5" x 2.5" 

3.0" x 2.5" 

1.5" x 1.5" 

2.5" x 2.5" 

1.5" x 1.5" 

2.5" x 1.5" 

2.5" x 2.5" 

3.0" x 2.5" 

1.25" 

2.00" 

2.50" 

3.25" 

2.00" 

2.50" 

1.875" 

2.25" 

2.125" 

2.75" 

.375 

.75 

1.25 

1.625 

1.25 

2.75 

1.00 

2.00 

2.00 

3.125


F-464A Elk-O-Lite ® Folding Spanner Wrench 

This compact folding tool has a spanner head at one end and a window 

jimmy at the other • Durable, lightweight Elk-O-Lite construction • Fits 

up to 3.5" rocker lug or pin lug coupling • Clip ring • Cast finish • 

Length (open), 10.375" • Length (folded), 5.875" • Weight, .375 lbs. 

F-464B Brass Folding Spanner Wrench 

This compact folding tool has a spanner at one end and a window jimmy at the other 

• Rugged, cast brass construction • Fits up to 3.5" rocker lug or pin lug coupling • 

Clip ring • Cast finish • Length (open), 10.375" • Length (folded), 5.875" • 


Wrenches and Wrench Holders 

T-464 Elk-O-Lite ® Universal Spanner 

Durable, lightweight Elk-O-Lite construction • Features hammer head, window jimmy, 

gas cock slot, and hanger loop • Fits up to 3.5" rocker lug or pin lug coupling • Cast 

finish • Length, 11.50" • Weight, .50 lbs. 

454 Adjustable Hydrant Wrench 

Rugged, cast manganese bronze head with chrome plated steel handle • Adjustable to fit up to 

1.750" pentagon nut or 1.50" square nut • Can be used as spanner on 2.5" pin lug couplings 

• Knurled handle • Length, 18.50" • Weight, 4.00 lbs. 

S-454 Adjustable Hydrant Wrench 

Rugged, cast manganese bronze head with chrome plated steel handle • Adjustable to fit up to 1.750" 

pentagon nut or 1.50" square nut • Can be used as spanner on 2.5" pin lug couplings or on rocker lug 

couplings from 2.5" or 5.0" • Knurled handle • Length, 16.50" • Weight, 4.50 lbs. 

S-454S Adjustable Hydrant Wrench 

Rugged, cast manganese bronze head with chrome plated steel handle • Adjustable to fit up to 1.750" pentagon 

nut or 1.50" square nut • Can be used as spanner on 4.0" and 5.0" Storz couplings, or on rocker lug 

couplings from 2.5" to 5.0" • Knurled handle • Length, 21.00" • Weight, 5.30 lbs. 

469 Spanner Wrench Holder 

Durable, lightweight Elk-O-Lite construction • Holds two T-464 universal spanners • Mounts either vertically 

or horizontally on apparatus for convenient accessibility • Quick, snap action release • Available with 

or without wrenches • Length (less wrenches), 7.375" • Weight (less wrenches), 1.00 lbs. 

470 Hydrant and Spanner Wrench Holder 

Durable, lightweight Elk-O-Lite construction • Holds one hydrant wrench (454 or S-454) 

and two T-464 universal spanners • Mounts either vertically or horizontally on apparatus 

for convenient accessibility • Quick, snap action release • Available with or without 

wrenches • Length (less wrenches), 10.00" • Weight (less wrenches), 1.50 lbs. 

Wrenches and Wrench Holders




industrial firefighting equipment 

possible...The wide selection of monitors, 

master stream nozzles and handline 

nozzles shown on the following pages 

of this catalog is a result of that 




confidence.


Features: 

• Rugged, Corrosion Resistant Brass Construction 


• FM Approved 

• Flow Efficient 3.0" Waterway 

• Fully Enclosed Gear with Stainless Steel Worm 

• 140° Vertical Travel 

• 360° Horizontal Rotation with Twist Lock 

• Bronze Balls in Ball races 

• Grease Fittings for Easy Lubrication 

• Compact Size 

• Available as Hydrant Mount 

• Available as Wheeled Portable Units 

• Available with Integral Ball Valve 

8393 Stingray ® Monitor 

Benefits: 




• Safe Operations 

• Minimal Field Maintenance 

• Flexible Installation Options 

• Cost Effective 

• Easy Installation 


Rugged, cast brass construction • Full 3.0" unobstructed waterway • Flows up to 1250 

GPM • Handwheel driven worm gear fully enclosed and protected from the elements • 

Stainless steel worm • Vertical travel from 70° above to 70° below horizontal • Gear 

holds vertical position wherever it is stopped • Four ball races with bronze balls and 

grease zerks for easy lubrication • Full 360° rotation with positive twist lock • 2.5" male outlet 

• FM Approved • See chart for base options • Finish red urethane enamel 

FM 

8393 w/optional 

282B & 181 

FM 

Stingray ® Industrial Monitors 

8393H Stingray ® Hydrant Monitor 

Same as 8393 except furnished with hydrant mount elbow assembly for attachment to 2.5" hydrant 

outlet • For flows up to 750 GPM • Complete with support arm and all necessary hardware to install 

on hydrants with barrel diameter up to 10.875" • Finish red urethane enamel 

8393IV Stingray ® Monitor with Integral Ball Valve 

Same as 8393 except with integral 3.0" quarter turn, full flow ball valve (see 2893 features on pg. 46) 

• Finish red urethane enamel 

New! 

8393IV w/optional 

IMS-500 

8393H w/optional J 

8393FW Stingray ® Four-Wheeled Portable Monitor 

8393 monitor mounted on 4-wheeled portable cart • For flows up to 750 GPM • Two 2.5" 

clappered swivel inlets standard • Optional with 3rd and 4th 2.5" swivel inlet or one 4.0" or 5.0" Storz 

inlet • .375" petcock drain in manifold • 300# pressure gauge • Wheels have pneumatic tires and friction 

locks for deployment stability • Safety stops limit vertical travel to 25 degrees above horizontal and limit 

horizontal travel to 45 degrees either side of center • Optional hose racks over wheels each hold 50' 

donut roll of 2.5" hose • Optional with 1.5" gated outlets • Finish red urethane enamel 

8393F w/optional J, 

hose racks and 1.5" 

gated outlet 

8393TW Stingray ® Two-Wheeled Portable Monitor 

8393 monitor mounted on 2-wheeled trailer • For flows up to 1000 GPM • Two 2.5" clappered swivel 

inlets standard • Optional with 3rd and 4th 2.5" swivel inlet or one 4.0" or 5.0" Storz inlet • .375" petcock 

drain in manifold • 300# pressure gauge • Wheels have pneumatic tires and friction locks for 

deployment stability • Safety stops limit vertical travel to 25 degrees above horizontal and limit horizontal 

travel to 45 degrees either side of center • Two hose beds each hold 100' of 2.5" or 3.0" hose • 

Finish red urethane enamel 

Flow Disc. Standard Bases Dimensions 

Model GPM L/Min Thds. and Inlets Width Depth Height 

8393 1250 4730 2.5" 3.0", or 4.0"-150# ANSI 14.75" 

Flange or 3.0" NPT Fe 

15.75" 15.75" 

8393H 

8393FW 

750 

750 

2840 

2840 

2.5" 

2.5" 

2.5" Fe 

(2) 2.5" Fe 

14.75" 

44.00" 

18.25" 

66.00" 

37.50" 

25.00" 

Wt. 

Lbs. 

47.50 

85.00 

230.00 

Flow Disc. Standard Bases Dimensions 

Model GPM L/Min Thds. and Inlets Width Depth Height 

8393TW 1000 3785 2.5" 

67.00" 72.00" 34.00" 

8393IV 1250 4730 2.5" 

14.75" 15.75" 20.375" 

(2) 2.5" Fe 

3.0" or 4.0"-150# ANSI 

Flange or 3.0" NPT Fe 

8393TW w/optional CSW-LB 

and 2 additional inlets 

Wt. 

Lbs. 

310.00 

68.25 

Stingray ® Industrial Monitors


Industrial Monitors 


SM-2000EB 

New! 

Spit-Fire ® Monitors 


SM-2000B 

8394-02 Spit-Fire ® Monitor 

Constructed of rugged, corrosion-resistant, cast brass with hardened steel 

worm gears • Fully enclosed gear cases for protection from the elements • 

Flows up to 2000 GPM through 4.0" waterway with cast-in vane • Double 

handwheel control assures ease of operation and positive lock in any position 

• Vertical travel is 135° (90° above to 45° below horizontal) • Horizontal 

travel is a full, continuous 360° (Handwheel remains stationary) • Bronze 

balls in all ball races • Furnished with liquid filled, 0-300# pressure gauge • 

Grease zerks for easy lubrication • Male outlet 3.5" NHT • Base inlet is 4.0" 

150# ANSI flange • Finish red urethane enamel with satin brass trim • 

Weight, 126.00 lbs. w/o shaper and tip • Dimensions: 13.25" W; 20.00" H. 

8394-04 Spit-Fire ® Monitor 

Same as 8394-02 except controlled by electric motors for remote operations • Same controls as 8294-04 page 24. 

Python ® Monitors 


HF-500 

FM 

299-11 Python ® Industrial Monitor 

Constructed of corrosion-resistant, seamless brass tubing with rugged, cast brass swivel joints • Flows 

up to 1250 GPM through 2.5" waterway • Vertical travel of 135° (90° above to 45° below horizontal) is 

controlled by stainless steel handle • Horizontal travel is a full 360° • Positive twist locks furnished for 

both vertical and horizontal movement • Ball races furnished with bronze balls and grease zerks for 

easy lubrication • Male outlet 2.5" NHT • Base inlet many options (see chart) • Optional “Steering 

Wheel” handle available (please specify) • Finish red urethane enamel with chrome plated trim • 

Weight, 45.00 lbs. w/o shaper and tip • Dimensions: 18.00" W, 17.50" H. 

299-11FW Python ® Four Wheeled Portable 

Same as 8393FW (see page 65) except with 299-11 monitor • Weight, 227.50 lbs. • 

Dimensions: 72.00" L.; 67.00" W.; 34.00" H. 

299-11F w/optional J 

299-11TW Python ® Two Wheeled Portable (Not Shown) 

Same as 8393TW (see page 65) except with 299-11 monitor • Weight, 307.50 lbs. • 

Dimensions: 72.00" L.; 67.00" W.; 34.00" H. 

Additional 


on Page 95 


FM 

299-20 w/optional CJK 

299-20 Giant Python ® Monitor 

Constructed of corrosion-resistant, seamless, #304 stainless steel tubing with cast stainless steel 

swivel joints • Full 3.5" waterway for flows up to 2500 GPM • Double handwheel control assures 

ease of operation and positive lock in any position • Vertical travel is 150° (90° above to 60° below 

horizontal) • Horizontal travel is a full, continuous 360° (handwheel rotates with monitor) • Stainless 

steel balls in all ball races • Furnished with liquid filled, 0-300# pressure gauge • Grease zerks for easy 

lubrication • Male outlet 3.5" NHT • Base inlet many options (see chart) • Finish red urethane enamel 

with satin brass trim • Weight, 126.00 lbs. w/o shaper and tip • Dimensions: 24.00" W; 32.00" H.

Traditional Monitors 

292-6 Handle Operated Monitor 


Constructed of rugged, corrosion-resistant, cast brass • For flows up to 750 GPM • 

Full 360° rotation with positive twist-lock mechanism • Vertical movement of 130° 

(70° above to 60° below horizontal) controlled by stainless steel handle rod with 

positive twist-lock mechanism • 2.5" NHT male outlet • Many optional base inlets 

(see chart) • Finish red urethane enamel with chrome plated trim • Weight, 46.25 

lbs. w/o shaper and tip • Dimensions: 13.75" W; 18.50" H. 

FM 


293-6 Single Wheel Operated Monitor (Not Shown) 

292-6 w/optional J 

Constructed of rugged, corrosion-resistant, cast brass • For flows up to 750 

GPM • Full 360° rotation with positive twist-lock mechanism • Vertical movement of 

150° (90° above to 60° below horizontal) controlled by handwheel driven worm gear • 2.5" NHT male outlet • 

Many optional base inlets (see chart) • Finish red urethane enamel with chrome plated trim • Weight, 52.75 lbs. 

w/o shaper and tip • Dimensions: 13.75" W., 18.50" H. 

294-11 Double Wheel Operated Monitor 

Constructed of rugged, corrosion-resistant, cast brass • For flows up to 1100 GPM • Full 360° rotation with 

handwheel driven worm gear • Vertical movement of 150° (90° above to 60° below horizontal) controlled by 

handwheel driven worm gear • 2.5" NHT male outlet • Many optional base inlets (see chart) • Finish red urethane 

enamel with chrome plated trim • Weight, 114.00 lbs. w/o shaper and tip • Dimensions: 16.75" W.; 26.187" H. 

FM 


CJN-B 

Hydrant Monitors 

8393H Hydrant Mounted Monitor 

See features and benefits on page 65. 

292-6H Hydrant Mounted Monitor (Not Shown) 

292-6 monitor with hydrant mount elbow assembly and support rods • Swivel inlet 2.5" • Finish red 

urethane enamel • Weight, 64.25 lbs. without shaper and tip. 

293-6H Hydrant Mounted Monitor (Not Shown) 



299-11H Hydrant Mounted Monitor 



8393H w/optional J 

FM 

FM 

299-11H w/optional 

CJ-B 

Flow 

Optional 

Model GPM L/Min Shaper Tip 

292-6 

293-6 

299-11 

750 

1250 

2840 

4730 

282B 

282B 

181 

181 

294-11 

8394-02 

8394-04 

1100 

2000 

2000 

4165 

7570 

7570 

282B 

284B 

284B 

181 

181-3 

181-3 

Max Tip Disc. 

Size Thds. Available Bases 

1.50" 2.50" NHT 2.50", 3.00", or 4.00" Fe NPT; 

2.50", 3.00", 4.00", or 6.00"-150# 

2.00" 2.50" NHT ANSI Flange; 2.50", 3.00", or 


2.00" 2.50" NHT 3.00" or 4.00" Fe NPT; 2.50", 

3.00", 4.00" or 6.00"-150# ANSI 

Flange; 3.00", 4.00", or 


2.50" 

2.50" 

3.50" NHT 4.00"-150# ANSI Flange 

3.50"NHT 

Flow 

Optional 

Model GPM L/Min Shaper Tip 

299-20 2500 9463 284B 181-3 

292-6H 750 

293-6H 

299-11H 

299-11FW 750 

299-11TW 1100 

2840 

2840 

4165 

282B 

282B 

282B 

181 

181 

181 

Max Tip Disc. 

Size Thds. Available Bases 

2.50" 3.50" NHT 3.00" or 4.00" Fe NPT; 3.00", 

4.00" or 6.00"-150# ANSI 

Flange; 3.00", 4.00", or 


1.50" 2.50" NHT 2.50" NHT or Any 2.50" 

Hydrant Thread 

1.50" 

2.00" 

2.50" NHT (2) 2.50" Fe Swivel 

2.50" NHT (2) 2.50" Fe Swivel 

Industrial Monitors


Elevated Industrial Monitors 

Traditional Elevated Monitors 

294-11CW Chainwheel Operated Elevated Monitor 

This elevated remote controlled monitor is designed for the horizontal and vertical 

movement to be controlled at ground level • By utilizing two chain driven 

wheels the monitor can be rotated 360° and the vertical position can 

be adjusted from 90° above to 60° below horizontal • The monitor 

will flow up to 1000 GPM and is constructed of rugged cast brass 

with chrome plated brass worm gears and stainless steel worm 

drive shafts • Grease zerks are furnished at swivel joints for easy 

294-11CW w/standard 

lubrication • The chainwheels and chain guides are aluminum alloy 

CJ-B-RC 

(brass available upon request) • Available with 4.0" NPT female or 

4.0"-150# ANSI flange base (please specify) • Monitor furnished with 

CJ-B-RC nozzle and 282B stream shaper (CJN-B-RC nozzle optional at 

additional cost) • Optional with 282B stream shaper and 181 deluge tip 

• Customer furnishes and is responsible for integrity of the standpipe on 

which monitor is mounted (contact our engineering department for guidelines 

and recommendations) • Customer also furnishes chain for operating 

monitor (.250" non-magnetic aluminum chain, McMaster-Carr part number 

3620T21) • Finish red urethane enamel with satin brass trim • Weight, 139 lbs. with stream 

shaper and nozzle. 

294-11RC Handwheel Operated Elevated Monitor 

This elevated remote controlled monitor is designed for the horizontal and vertical movement of 

the upper assembly to be operated at ground level • By utilizing two 15" cast brass handwheels 

the monitor can be rotated 360° and the vertical position can be adjusted from 90° above to 60° 

below horizontal • Upper monitor unit is constructed of rugged cast brass with chrome plated 

brass worm gear and stainless steel worm drive shaft • It is designed to flow up to 1000 GPM 

and has a 4.0" NPT female inlet and a 2.5" NHT outlet • Grease zerks are furnished at swivel joints 

for easy lubrication • Lower base unit is constructed of rugged cast brass with chrome plated 

brass worm gear and drive shaft • It has a double row of bronze bearings for smooth operation 

and a Teflon bearing surface on which the weight of the upper unit rides • Grease zerks are furnished 

for easy lubrication and the gear assembly is protected by a molded urethane weather 

guard • Base unit is standard with a 4.0"-150# ANSI flange inlet and a 4.0" NPT female outlet 

• A 4.0" NPT female inlet is optional • Upper handwheel assembly is constructed of rugged cast 

brass with cadmium plated miter gears and stainless steel drive shaft • It is furnished with U-bolts 

to attach to the 4.0" riser pipe • Complete 294-11RC can be fabricated to a height of 34' • 

Customer to furnish 4.0" riser pipe and .750" brass or stainless steel drive rod between upper and 

lower units • Customer also responsible for sufficiently supporting standpipe on which monitor is 

mounted (contact our engineering department for guidelines and recommendations) • 295 support 

bearing (see page 68) must be used above lower base unit when: 500 GPM is flowed with elevation 

above 20'; or when 750 GPM is flowed with elevation above 15'; or when 1000 GPM is flowed 

with elevation above 10' • Monitor furnished with CJ-B-RC nozzle and 282B stream shaper 

(CJN-B-RC nozzle optional at additional cost) • Optional with 282B stream shaper and 181 deluge tip 

• Finish red urethane enamel with satin brass trim • Weight, 224 lbs. with stream shaper and nozzle. 


294-11RC w/optional CJN-B-RC 

Typical 

Installations


Free-Standing Elevated Monitors 

Important notes: The riser pipe (standpipe) and companion 

flange configuration to which the 299-11EL is to be 

installed must be able to withstand a bending moment 

of 10,000 ft./lbs. applied to the face of the flange. 

Do Not use cast iron flange or cast iron pipe. Pressure 

and flow characteristics of water supply must be determined 

prior to installation and a restricting device, such 

as an orifice plate, installed between the flanges to limit 

flow and pressure to appropriate values as indicated in 

chart below. 

299-11EL Free-Standing Elevated Monitor 

A pre-fabricated free-standing elevated monitor 

which utilizes the flow-efficient 299-11 “Python” 

monitor (see page 60) • Available in 10', 15', 

20', 25', 30', and 40' heights • Flow-efficient, 

tubular steel riser pipe allows for flows up to 

750 GPM (see chart for maximum flows) • 

Tubular steel horizontal drive sleeve allows for 

continuous 360° rotation • Vertical movement 

from 45° above to 35° below horizontal is 

controlled by stainless steel cables • 

Handwheel driven friction lock for horizontal 

positioning • Lever operated friction lock for 

vertical positioning • 2.5" NHT male outlet and 

4.0"-150# or 6.0"-150# ANSI flange base (see 

chart for base sizes) • Optional CJ-B-RC or 

CJN-B-RC remote controlled nozzles (see pages 

66-67) are ideal for use on these monitors • 

Also optional with 282B stream shaper (see 

page 68) and 181 deluge tip (see page 21) • 

Units shipped assembled (25', 30' and 40' 

units shipped in two assembled sections, 

each requiring two field welds) • Finish red 



Horizontal 

Lock 

Control 

Handle 

Vertical 

Lock 

New! 


299- 

11EL 

Height 

10' 

15' 

20' 

Maximum Flow 

ANSI Flange 

Base Size GPM L/Min 

4.0' - 150# RF 750 2840 

4.0' - 150# RF 750 2840 

4.0' - 150# RF 750 2840 

Tube, Tip, and 

Discharge Size 

282B & 181 (1.5") 

282B & 181 (1.5") 

282B & 181 (1.5") 

Options 

Combination Fog Nozzle 

(GPM) 

CJN-B-RC (750) 



New Control Assembly 

Wt. 

Lbs. 

300 

400 

500 

299- 

11EL 

Height 

25' 

30' 

40' 

Maximum Flow 

ANSI Flange 

Base Size GPM L/Min 

6.0' - 150# RF 750 2840 

6.0' - 150# RF 750 2840 

6.0' - 150# RF 500 1895 

299-11EL w/optional 

CJ-B-RC 

Tube, Tip, and 

Discharge Size 

282B & 181 (1.5") 

282B & 181 (1.5") 

282B & 181 (1.5") 

Options 

Combination Fog Nozzle 

(GPM) 



CJ-B-RC (500) 

Wt. 

Lbs. 

600 

700 

900 

Elevated Industrial Monitors


Remote Controlled Industrial Monitors 

294-11XBHC 


Like sentries, these remote controlled monitors are engineered to stand guard over industrial 

complexes, refineries, chemical plants, loading docks, tanker berthings, railroad yards, offshore 

platforms, etc. The instant the monitor is needed for fire protection or actual firefighting, it can be 

activated from a remote location where the operator can turn on the water supply; direct the monitor 

vertically or horizontally; and change the stream pattern of the nozzle; all from a safe distance. 

There is even an option that allows the monitor to oscillate automatically, thus freeing the operator to 

tend other duties.The system includes a monitor with nozzle, a valve box complete with hydraulic 

pump/motor/tank unit, and a control box with complete panel of function switches. Both the valve 

box and control box are available in either stainless steel NEMA 4X for unclassified areas or cast 

aluminum NEMA 7/4 for Class 1, Group B, C, & D, Division I area classification. Several monitors 

can be operated from one control station with the option of a secondary control station at another 

remote location. The system is flexible enough to fit your requirements. 

294-11XBHC Brass Remote Controlled Monitor 

Rugged, corrosion-resistant, cast brass construction for years of dependable service in all environments 

• Horizontal and vertical movements are driven by powerful hydraulic actuators with enough 

torque to move the monitor even under the most adverse conditions • These actuators have built-in, 

hydraulic flow controlling, adjustable needle valves and are constructed of materials suitable for salt 

water atmosphere • Vertical actuator allows movement of 150° (90° above to 60° below horizontal) • 

Horizontal actuator is available for rotation of 180°, 270°, and 360° (please specify) • All ball races 

are furnished with bronze balls and have grease zerks for easy lubrication • Both vertical and horizontal 

spur gears have safety covers • Furnished with SM-1250HB automatic nozzle (see page 73) for 

flows up to 1000 GPM • Pattern is changed from straight stream to wide fog by means of a hydraulic 

piston with a flow control, needle valve • Monitor is shipped mounted on top of a 38" pipe spool with 

hydraulic lines attached and valve box mounted to spool • This entire assembly can be installed at 

ground level or in elevated location • Can also be utilized on fire boats or work boats • Finish red 


Standard Remote Controlled System 


Typical Installation


299-20XHC Stainless Steel Remote Controlled Monitor 

Constructed of seamless, #304 stainless steel tubing (3.5" ID) with cast stainless steel swivel 

joints for years of dependable service in all environments • Horizontal and vertical movement 

are driven by powerful hydraulic actuators with enough torque to 

move the monitor even under the most adverse conditions 

• These actuators have built-in, hydraulic flow controlling, 

adjustable needle valves and are constructed of materials 

suitable for salt water atmosphere • Vertical actuator allows 

movement of 150° (90° above to 60° below horizontal) 

• Horizontal actuator is available for rotation of 180°, 

270°, and 360° (please specify) • All ball races are furnished 

with stainless steel balls and have grease zerks 

for easy lubrication • Both vertical and horizontal spur 

gears have safety covers • Furnished with CJK-HP combination 

fog nozzle (see page 72) for flows of 1250, 

1500, 1750, and 2000 GPM (please specify) • Pattern is 

changed from straight stream to wide fog by means of 

two hydraulic pistons with a flow control, needle valve 

• Monitor is shipped mounted on top of a 38" pipe spool with 

hydraulic lines attached and valve box mounted to spool • This entire assembly can be installed 

at ground level or in elevated location • Can also be utilized on fire boats or work boats 

• Finish red urethane enamel. 

The System Package 

Valve Box / Hydraulic Source 

299-20XHC 

Contains three 4-way, solenoid activated, hydraulic valves and the hydraulic pump/motor/tank 

unit to power one monitor • Wired with terminal strips for easy electrical hookup • All hydraulic 

connections plumbed with .375-OD tube fittings • Hydraulic pump/motor/tank unit is a 24VDC 

motor; a gear pump with built-in check valve, relief valve, and pressure gauge; and a 46 cu. in. 

reservoir with removable stainless steel filter • Furnished in NEMA 4X stainless steel for unclassified 

areas or in NEMA 7/4 cast aluminum for Class 1, Group B, C, & D, Division I & 2 • Valve 

box is mounted to a 38" pipe (4.0") spool and hydraulic lines attached to the monitor • The 

hydraulic system is filled with oil, purged and completely tested before shipment • Finish natural 

metal. 

Pump/Motor/Tank 

Spool Mounted Valve 

Box w/Hydraulic 

Pump NEMA 4x 


Master Control Box / Panel 

Contains controls for monitor (or up to 6 monitors) functions • Standard controls include: 

Standby pilot light; on/off main power push button with pilot light; water valve on/off switch with 

pilot light; monitor left/right and up/down (joy stick in NEMA 4X box–switches in NEMA 7/4 

box); and nozzle fog/straight stream switch • Optional automatic oscillating switch • Main power 

is terminated at valve box • Standard power requirement is 85-264VAC, 47-63 Hz., single phase, 

480VA • Power from valve box to control box is 24VDC • Maximum distance from valve box to 

control box is 3000' • Furnished with terminal strip for convenient electrical hookup • Furnished 

in NEMA 4X stainless steel for unclassified areas or in NEMA 7/4 cast aluminum for Class 1, 

Group B, C, & D, Division I & 2 • Finish natural metal. 

Secondary Control Box / Panel (Not Shown) 

Optional control box for use at a secondary location • Identical to master control box. 

Flow 

Discharge 

Wt. 

Model GPM L/Min Thread Std. Base Width Depth Height Lbs. 

294-11XBHC 300-1000 1135-3785 2.5" NHT 4.0-150# 

ANSI Flange 

17.50" 23.00" 27.00" 160.00 

299-20XHC 

3.5" NHT 4.0-150# 24.00" 26.50" 33.00" 160.00 

ANSI Flange 

1250 

1500 

1750 

2000 

4731 

5680 

6624 

7570 

Control Box 

NEMA 7/4 

Control Box 

NEMA 4X 

Remote Controlled Industrial Monitors


Industrial Monitor Nozzles 

Mystery Nozzles 

JN “Mystery” Monitor Nozzle 

J “Mystery” Monitor Nozzle 

Rugged, cast brass construction • Twist shutoff design • Stream pattern 

easily changed under pressure with large rubber handles • Grease zerk 

for easy lubrication of tip threads • 500 GPM flow standard • 350 GPM 

flow optional • Optional stainless steel stem available for both gallonages • 

2.5" swivel base • Cast brass finish standard • Chrome plated optional. 

Rugged, cast brass construction • Twist shutoff design • Stream pattern easily changed under pressure 

with large rubber handles • Grease zerk for easy lubrication of tip threads • 1000 GPM flow • 

2.5" swivel base • Cast brass finish standard • Chrome plated optional. 

CJK “Mystery” Monitor Nozzle 

Rugged, cast brass construction • 2000 GPM flow standard • 1250, 1500, and 1750 GPM flow 

optional • Stream pattern easily changed under pressure with large rubber handles • No twist shutoff 

• 3.5" swivel base • Cast brass finish standard • Chrome plated optional. 

CJK-HP “Mystery” Remote Controlled Monitor Nozzle 

Same as CJK except stream pattern controlled by two hydraulic pistons with flow control valve. 

Select-O-Stream ® Nozzles 

IMS-500/350 Monitor Nozzle 

Rugged, cast brass construction • Constant gallonage • 500 GPM standard • 350 GPM optional • 

Excellent stream patterns • Exceptional wide fog (140 degrees) • Pattern easily changed under 

pressure with large handles • No twist shut off • Grease fitting for easy lubrication of tip cam • 

Heavy duty urethane handle grips • 2.5" swivel base • Cast brass finish. 

FM 

CJ-B Select-O-Stream ® Monitor Nozzle 

Rugged, cast brass construction • 500 GPM standard • 350 GPM optional • Constant gallonage • 

Heavy-duty, protective rubber bumper • Stream pattern easily changed under pressure with large 

rubber handles • No twist shutoff • Grease zerk for easy lubrication of tip threads • 2.5" swivel base • 

Satin brass finish. 


FM 

CJ-B-RC Select-O-Stream ® Remote Controlled Monitor Nozzle 

Same as CJ-B except stream pattern controlled by cables for remote operation. 

CJN-B Select-O-Stream ® Monitor Nozzle 

Same as CJ-B except higher flows • 1000 GPM standard • 750 GPM optional. 

CJN-B-RC Select-O-Stream ® Remote Controlled Monitor Nozzle 

(Not Shown) 

Same as CJN-B except controlled by cables for remote operation.



CSW-LB Select-O-Flow ® Monitor Nozzle 

Rugged, cast brass construction • Constant flow/select gallonage: 350, 500, 

750, 1000, and 1250 GPM settings • Excellent straight stream quality in any 

flow setting • Pattern easily changed under flowing conditions • Gallonage easily 

changed under flowing conditions (even down to shutoff position) • Heavy-duty, 

protective rubber bumper • 2.5" swivel base • Satin brass finish. 

Hydro-Foam ® Nozzles 


HF-350 Hydro-Foam ® Monitor Nozzle 

Constant gallonage 350 GPM (1325 L/min) • 1⁄2, 1, 3, and 6% proportioning • Clear vinyl pick-up hose (9') • 

Optional quick connect coupling • Optional 3% / 6% valve • Optional shutoff valve • Optional drum pick-up 

kit • No twist shutoff • 2.5" swivel base • Cast brass or chrome plated finish (See options on page 21). 

HF-500 Hydro-Foam ® Monitor Nozzle 

Constant gallonage 500 GPM (1892 L/min) • 1⁄2, 1, and 3% proportioning • Clear vinyl pick-up hose 

(9') • Optional quick-connect coupling • Optional shutoff valve • Optional drum pick-up kit • No twist shutoff • 

2.5" swivel base • Cast brass or chrome plated finish. (See options on page 21). 


SM-1250B Select-O-Matic ® Low Pressure Monitor Nozzle 

Flows from 300 to 1250 GPM • Operates at 80 psi rather than 100 psi • Automatically adjusts to fluctuating 

flows maintaining effective pressure and stream • Rugged brass and stainless steel construction • Stream 

pattern easily changed under pressure with large handles • Heavy, duty protective urethane bumper and 

handle grips • No twist shutoff • 2.5" swivel base standard • 3.5" swivel base optional • Satin brass finish. 

SM-1250HB Select-O-Matic ® Low Pressure Monitor Nozzle 

Same as SM-1250B except stream pattern is controlled by a hydraulic piston with flow control valve. 

SM-2000B Select-O-Matic ® Low Pressure Monitor Nozzle 

Flows from 500 to 2000 GPM • Operates at 80 psi rather than 100 psi • Automatically adjusts to fluctuating 

flows maintaining effective pressure and stream • Rugged brass and stainless steel construction • Stream 

pattern easily changed under pressure with large handles • No twist shutoff • Heavy, duty protective urethane 

bumper and handle grips • 3.5" swivel base • Satin brass finish. 


Wt. 

Model Threads GPM L/Min Length Lbs. 

J 

JN 

2.5" 

2.5" 

350 or 500 

1000 

1325 or 1895 

3785 

7.50" 

8.00" 

8.50 

9.25 

CJK 

CJK-HP 

3.5" 

3.5" 

1250, 1750, 1500, 2000 

1250, 1750, 1500, 2000 

4731, 6624, 5680, 7570 

4731, 6624, 5680, 7570 

10.625" 22.25 

10.625" 27.75 

CJ-B 

CJN-B 

CJ-B-RC 

CJN-B-RC 

2.5" 

2.5" 

2.5" 

2.5" 

350 or 500 

750 or 1000 

350 or 500 

750 or 1000 

1325 or 1895 

2840 or 3785 

1325 or 1895 

2840 or 3785 

6.50" 

7.75" 

6.50" 

7.75" 

12.375 

15.50 

14.50 

17.75 


Wt. 

Model Threads GPM L/Min Length Lbs. 

SM-1250B 2.5" or 3.5" 

9.00" 31.50 

SM-1250HBP 2.5" or 3.5" 

9.00" 32.25 

SM-2000B 

HF-350 

HF-500 

CSW-LB 

3.5" 

2.5" 

2.5" 

2.5" 

9.00" 

7.00" 

7.00" 

8.875" 

38.75 

19.00* 

19.00* 

21.375 

IMS 

2.5" 

*Weight includes pick-up hose 

300-1250 

300-1250 

500-2000 

350 

500 

350, 500, 

750, 1000, 1250 

350 or 500 

1135-4721 

1135-4721 

1895-7570 

1325 

1895 

1325, 1895, 

2040, 3785, 4730 

1325 or 1895 

6.75" 

8.75 

Industrial Monitor Nozzles


Industrial Monitor Accessories 

702 Automatic Ball Drip Drain Valve 

Cast brass automatic ball drip has drain rate of 2-3 GPM • Ball drops away from 

seat at 10 psi • Will operate with up to a 20' head of water • .75" male inlet and 

outlet • Mounts horizontally • Finish cast brass • Length, 3.00" • Weight, .778 lbs. 

282B Brass Stream Shaper 

Rugged, cast brass construction • Replaceable nylon vanes • Impervious to corrosive atmospheres 

and brackish water conditions • For use on brass monitors when using smooth bore deluge tip • 2.5" 

female inlet • 2.5" male outlet • Finish satin brass or chrome plated • Length, 4.50" • Weight, 3.25 lbs. 

282A Elk-O-Lite ® Stream Shaper (Not Shown) 

Similar to 282B except durable, lightweight Elk-O-Lite construction • See page 34. 













84 w/optional gear operator 

84 Butterfly Wafer Valve for Monitors 

Quick acting butterfly wafer valve sandwiches between ANSI companion flange and flange base of 

monitor for shutoff capabilities • Cast iron body with #316 stainless steel stems (upper and lower) • 

Seat/seal made of EPDM • Standard throttling handle has 10 positive locking positions • Optional 

with gear operator • Pressure rated at 200 psi • Available in 3.0" and 4.0" sizes • Thickness, 2.00" • 

Weight, 11.25 lbs. (3.0"); 14.30 lbs. (4.0"). 

Industrial Monitor Accessories 

295 Support Bearing for 294-11RC Monitors 

For use with 294-11RC elevated monitors when flow and elevation exceed allowable limits • Designed 

so that 4.0" waterway and .750" vertical control rod can rotate inside of bearing • Has 3.0" NPT 

female for attaching to adjacent support • Finish red urethane enamel • Weight, 31.50 lbs. 

296 Hydrant Base for Monitors 

Can be utilized as fire hydrant when used in conjunction with remote, underground control valve; 

i.e. post indicator valve • Industrial monitor of choice (292, 293, 294, 299, 8393, or 8394 series) 

mounts on 4.0"-150# ANSI flange on top • Furnished standard with four (4) 2.5" male outlets with 

caps and chains (please specify) • Optional with three (3) 2.5" and one (1) 4.5" male outlets with 

caps and chains • Optional with X-86 or B-94 valves on all or any 2.5" outlet • Inlet 6.0"-150# ANSI 

flange • Outlet 4.0"-150# ANSI flange • Cast iron construction • U.L. listed • Finish red urethane 

enamel with satin brass trim • Weight, 71.00 lbs.


Wat-R-Wall Nozzle 

222 2.5" Wat-R-Wall Nozzle 

Rugged cast brass construction • 2.5" free swivel inlet • 2.5" male outlet 

with cap and chain (can be removed to extend line) • Flows 100 GPM 

(380 L/min) @ 100 psi (700 Kpa) • Finish chrome plated • Length, 8.25" 

• Width, 10.00" • Height, 8.25" • Weight, 11.50 lbs. 

222 1.5" Wat-R-Wall Nozzle (Not Shown) 

Same as 222-2.5" except with a 1.5" free swivel inlet and no outlet • 

Flows 100 GPM (380 L/min) @ 100 psi (700 Kpa) • Finish chrome 

plated • Length, 8.00" • Width, 10.00" • Height, 7.25" • Weight, 8.00 lbs. 

Special Application Nozzles 

Fixed System Fog Nozzles 

NTS-C .75" Fixed System Nozzle 

Flow range 5 to 40 GPM (20-150 L/min) @ 100 psi (700 Kpa) • Constant flow • Fog pattern can 

be set up to 120° • Rugged brass construction • Available .75" NPT male or female base (please 

specify) • Finish satin brass • Length, 2.00" • Weight, 8 ozs. 

NTL-C 1.0" Fixed System Nozzle 

Flow range 40 to 100 GPM (150-380 L/min) @ 100 psi (700 Kpa) • Constant flow • Fog pattern 

can be set up to 120° • Rugged brass construction • Available 1.0" NPT male or female base 

(please specify) • Finish satin brass • Length, 2.50" • Weight, 1.00 lb. 

NT-C 1.5" Fixed System Nozzle (Not Shown) 

Flow range 100 to 250 GPM (380-850 L/min) @ 100 psi (700 Kpa) • Constant flow • Fog pattern 

can be set up to 120° • Rugged brass construction • 1.5" NPT male base • Finish satin brass • 


NT-500-C 2.5" Fixed System Nozzle 

Available 350 or 500 GPM (1325-1890 L/min) @ 100 psi (700 Kpa) • Constant flow • Fog pattern 

can be set up to 120° • Durable Elk-O-Lite construction • 2.5" NPT female base • Finish hard 


NT-1000-C 2.5" Fixed System Nozzle (Not Shown) 

Available 500 or 1000 GPM (1890-3780 L/min) @ 100 psi (700 Kpa) • Constant flow • Fog pattern 

can be set up to 120° • Durable Elk-O-Lite construction • 2.5" NPT female base • Length, 

6.00" • Weight, 3.50 lbs. 

De-Icing Nozzles 

Additional Flow Data on pages 84, 85 & 86 

SFL-DI 1.5" De-Icing Nozzle 

Same as SFL (see page 10) except special parts for applying de-icing and anti-icing fluids in 

Type I systems • Also available with heavy-duty pistol grip (SFL-GDI) • Finish hard anodized with 

chrome plated trim. 

SFL-GDI 1.5" De-Icing Nozzle w/Pistol Grip (Not Shown) 

Same as SFL-DI except with rugged, cast Elk-O-Lite pistol grip. 

SFS-DI 1.0" De-Icing Nozzle (Not Shown) 

Same as SFS (see page 10) except special parts for applying de-icing and anti-icing fluids in 

Type I systems • Finish hard anodized with chrome plated trim. 

SM-10FE Remote Controlled De-Icing/Anti-Icing Nozzle 

Special automatic nozzle for use with Sidewinder remote controlled Mini-Monitor. 

Special Application Nozzles


Industrial Handline Nozzles 

Industrial Fog Nozzles 

These combination fog nozzles are ideal for use in manufacturing plants, paper mills, refineries, 

chemical plants, commercial complexes, office buildings, etc. Most of them are U.L. Listed and/ 

or FM Approved. 

S-205-B 1.0" Industrial Nozzles (Not Shown) 

Rugged, cast brass construction • Combination fog and straight stream • Twist on/twist off • 23 GPM 

standard • 12 GPM optional • U.L. Listed • 1.0" base • Finish satin brass or chrome plated. 

L-205-B 1.5" Industrial Nozzle 


standard • 60 and 125 GPM optional • U.L. Listed • 1.5" base • Finish satin brass or chrome plated. 

U 

® L 

L-200 1.5" Industrial Mystery Nozzle 


standard • 60 and 125 GPM optional • 1.5" base • Finish satin brass or chrome plated. 

1575 1.5" Industrial Nozzle 

Constructed of lightweight polycarbonate • Combination fog and straight stream • 75 GPM • 1.5" NHT 

or 1.5" NPSH base • FM Approved • Red. 

205-B 2.5" Industrial Nozzle (Not Shown) 

Rugged, cast brass construction • Combination fog and straight stream • Twist on/twist off • 

170 GPM standard • 250 GPM optional • U.L. Listed • 1.5" base • Finish satin brass or chrome plated. 

D-205-B 2.5" Industrial Nozzle 

U L ® 

FM 

FM 

U 

® L 

Same as 205-B except with A-327 2.5" x 1.5" adapter in base • U.L. Listed • 2.5" base • Finish satin 

brass or chrome plated. 

D-200 2.5" Industrial Mystery Nozzle (Not Shown) 


standard • 250 GPM optional • 2.5" base • Finish satin brass or chrome plated. 

Electrical Fog Nozzles 

These nozzles are designed to be used on class “C” hazards. They are safe to use at a distance of 

10' or greater from live electrical apparatus and/or circuits with voltage up to 250,000. These nozzles 

do not have straight stream capabilities; only narrow fog to wide fog. Some are U.L. Listed and/or 

FM Approved. 

L-205-EB 1.5" No-Shock Nozzle 

Rugged, cast brass construction • Twist on/twist off • Opens on narrow fog/adjusts to wide fog • 95 

GPM standard • 60 and 125 GPM optional • U.L. Listed • FM Approved • 1.5" base • Finish satin 

brass or chrome plated. 

1575E 1.5" No-Shock Nozzle (Not Shown) 

Same as 1575 except no straight stream • FM Approved • Red. 

Industrial Handline Monitors 

U 

® L 

L-OE 1.5" No-Shock Nozzle (Not Shown) 

Same as L-O nozzle (see page 14) except no straight stream capabilities • 95 GPM standard • 60 and 

125 GPM optional • 1.5" base • Finish satin brass or chrome plated. 

NSL 1.5" Elk-O-Lite No-Shock Nozzle 

Durable, lightweight Elk-O-Lite construction • 95 GPM • Constant gallonage • No straight stream • 

Aluminum/bronze horseshoe handle with double stops • Adjustable neoprene seat with hydraulically 

balanced Acetal ball • Heavy duty, protective EPDM bumper • Replaceable spinning teeth for wide 

protective water curtain • U.L. Listed • Finish hard anodized. 

D-205-EB 2.5" No-Shock Nozzle (Not Shown) 

Rugged, cast brass construction • Twist on/twist off • Opens on narrow fog/adjusts to wide fog • 170 

GPM standard • 250 GPM optional • U.L. Listed • 2.5" base • Finish satin brass or chrome plated.


Marine Handline Nozzles 

These nozzles are specifically designed and manufactured for firefighting in the harsh, corrosive marine 

environment. Some models meet the stringent performance requirements of the U.S. Navy and/or U.S. Coast 

Guard. They are also superior for use in the shipping industry, in refineries, in chemical complexes, and on 

offshore drilling or production rigs. All of these nozzles are ideal for the application of AFFF 

and aeration foam tubes are available for most models (see page 13). 

SFL-N 1.5" Marine Nozzle 

Rugged, corrosion resistant cast brass construction • Heavy-duty manganese/bronze horseshoe 

handle • Acetal ball with self-adjusting UHMWPE seat • Available 95 or 125 GPM 

(please specify) • Constant flow • Flush without shutting down • 1.5" free swivel base 

• Ideal for application of AFFF • Optional foam aeration tube model 244 (see page 13) 

• Finish cast brass. 

Marine Handline Nozzles 

SFL-GN-95 1.5" Foam Nozzle with Pistol Grip 

Rugged, corrosion resistant cast brass construction • Heavy-duty manganese/bronze horseshoe handle • Acetal ball with 

self-adjusting UHMWPE seat • Gallonage 95 GPM • Constant flow • Flush without shutting down • 1.5" NPSH free swivel base 

standard • 1.5" NHT free swivel base optional • Durable, cast pistol grip • Ideal for application of AFFF • Optional foam aeration 

tube model 244 (see page 13) • Complies with MIL-N-24408, Type 1 • Finish cast brass. 

SFL-GN-125 1.5" Foam Nozzle with Pistol Grip 

Same as SFL-GN-95 except flows 125 GPM. 

SFL-B 1.5" Marine / Industrial Nozzle 

Rugged, corrosion resistant cast brass construction • Heavy-duty manganese/bronze horseshoe handle 

• Acetal ball with adjustable neoprene seat • Select gallonage: 40, 60, 95, and 125 GPM • Constant flow 

• Flush without shutting down • Replaceable spinning teeth for wide protective water curtain • Optional 

molded urethane teeth (please specify) • 1.5" swivel base • Ideal for application of AFFF • Optional foam 

aeration tube model 246 (see page 13) • Finish cast brass. 

SFL-BG 1.5" Marine Nozzle with Pistol Grip 

Same as SFL-B except with heavy-duty, cast pistol grip. 

SFL-GCG-95 1.5" Foam Nozzle with Pistol Grip (Coast Guard Approved) 


• Acetal ball with self-adjusting UHMWPE seat • Gallonage 95 GPM • Constant flow • Flush without shutting 

down • 1.5" NHT free swivel base • Durable, cast pistol grip • Ideal for application of AFFF • Optional 

foam aeration tube model 244 (see page 13) • USCG Approval number: 162.027/12/0-IAW CFR46 162.027 

• Finish cast brass (Also available without pistol grip as SFL-CG). 

DSF-N 2.5" Foam Nozzle 


• Acetal ball with self-adjusting UHMWPE seat • Gallonage 250 GPM • Constant flow • Flush without shutting 

down • 2.5" NHT free swivel base • Ideal for application of AFFF • Complies with MIL-N-24408, Type 1 

• Finish cast brass. 

Hose Threads 


Wt. 

Model Size Base Tip GPM L/Min Height Lbs. 

S-205-B 

L-205-B 

L-200 

205-B 

200 

D-205-B 

D-200 

L-205-EB 

L-E 

NSL 

1.0" 

1.5" 

1.5" 

2.5" 

2.5" 

2.5" 

2.5" 

1.5" 

1.5" 

1.5" 

1.0" 

1.5" 

1.5" 

1.5" 

1.5" 

2.5" 

2.5" 

1.5" 

1.5" 

1.5" 

— 

— 

— 

— 

— 

— 

— 

— 

— 

— 

12 or 23 

60, 95, or 125 

60, 95, or 125 

170 or 250 

170 or 250 

170 or 250 

170 or 250 

60, 95, or 125 

60, 95, or 125 

95 

45 or 87 

225, 360, or 475 

225, 360, or 470 

645 or 945 

645 or 945 

645 or 945 

645 or 945 

225, 360, or 475 

225, 360, or 475 

360 

4.50" 

5.00" 

4.75" 

7.063" 

7.125" 

8.313" 

11.563" 

5.00" 

7.00" 

7.375" 

2.50 

2.875 

4.125 

5.625 

6.50 

7.375 

8.75 

2.875 

5.50 

2.875 

Hose Threads 


Wt. 

Model Size Base Tip GPM L/Min Height Lbs. 

205-EB 

D-205-EB 

SFL-B 

SFL-BG 

SFL-GN 

SFL-GCG-95 

SFL-N 

DSF-N 

1575 

2.5" 

2.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

2.5" 

1.5" 

1.5" 

2.5" 

1.5" 

1.5" 

1.5" 

1.5" 

1.5" 

2.5" 

1.5" 

— 

— 

— 

— 

— 

— 

— 

— 

— 

170 or 250 

170 or 250 

40-60-95-125 

40-60-95-125 

95 or 125 

95 

95 or 125 

250 

75 

645 or 945 

645 or 945 

150-225-360-475 

150-225-360-475 

360 or 475 

360 

360 or 475 

945 

284 

7.063" 

8.313" 

7.625" 

8.375" 

7.375" 

7.375" 

7.375" 

10.75" 

4.875" 

5.625 

7.375 

7.75 

9.625 

7.625 

7.625 

6.50 

12.75 

.375 

Marine Handline Nozzles


Industrial Valves 

FM 

U 

® L 

U-20 Brass Angle Valve 1.5" and 2.5" 

Rugged, cast brass construction • Rubber seat • Rated at 300 psi • U.L. 

Listed • FM Approved • Inlet female NPT • Outlet female NPT • Available 

either 1.5" or 2.5" (please specify) • Finish cast brass or cast chrome. 

FM 

U 

® L 

U-25 Brass Angle Valve 1.5" or 2.5" 

Rugged, cast brass construction • Rubber seat • Rated at 300 psi • U.L. Listed • FM Approved • Inlet 

female NPT • Outlet male NHT • Available either 1.5" or 2.5" (please specify) • Finish cast brass or 

cast chrome. 

U 

® L 

UR-25 Pressure-Matic Angle Valve 1.5" and 2.5" 

Automatic pressure reducing valve for use in standpipe or fire water systems • Operates under flow 

and no-flow conditions • Operates at pressures up to 400 psi • Fits most existing cabinets where 1.5" 

and 2.5" valves are currently used • Rugged, cast brass construction • NPT female inlet • NHT male 

outlet • Available either 1.5" or 2.5" (please specify) • U.L. Listed • ULC Listed • For additional 

information see Elkhart Building Equipment Catalog • Finish cast brass or cast chrome. 

B-94 Brass Ball Valve 2.5" 

Rugged, cast brass construction • Quarter turn ball valve • Acetal ball with adjustable neoprene seat • 

Locking handle • 2.5" hose thread swivel inlet • 2.5" male hose thread outlet • Finish red urethane 

enamel with satin brass or chrome plated trim. 

X-86 Brass Gate Valve 2.5" 

Rugged, cast brass construction • Non-rising stem design • Metal to metal seat • Not recommended 

for wet systems • Rated at 175 psi • Crank handle • 2.5" hose thread swivel inlet • 2.5" male hose 

thread outlet • Finish red urethane enamel with satin brass or chrome plated trim. 

88 Brass Gate Valve 1.5" and 2.5" 

Rugged, cast brass construction • Non-rising stem design • Metal to metal seat • Not recommended 

for wet systems • Rated at 300 psi • NPT female inlet • NHT male outlet • Available either 1.5" or 2.5" 

(please specify) • Furnished with #310 cap and chain • Finish cast brass or cast chrome. 

89 Brass Gate Valve 1.5" and 2.5" (Not Shown) 

Same as 88 except NPT female inlet and NPT female outlet • No cap and chain. 

Industrial Valves 

Threads 

Wt. 

Model Size Inlet Outlet Height Lbs. 

U-20 

U-20 

U-25 

U-25 

UR-25 

UR-25 

1.5" 

2.5" 

1.5" 

2.5" 

1.5" 

2.5" 

1.5" NPT 

2.5" NPT 

1.5" NPT 

2.5" NPT 

1.5" NPT 

2.5" NPT 

1.5" NPT 

2.5" NPT 

1.5" NHT 

2.5" NHT 

1.5" NHT 

2.5" NHT 

6.875" 

9.75" 

6.875" 

9.75" 

7.75" 

10.563" 

4.125 

11.75 

4.125 

11.75 

7.50 

18.50 

Threads 

Wt. 

Model Size Inlet Outlet Height Lbs. 

B-94 

X-86 

88 

88 

89 

89 

2.5" 

2.5" 

1.5" 

2.5" 

1.5" 

2.5" 

2.5" Hose Thread 


1.5" NPT 

2.5" NPT 

1.5" NPT 

2.5" NPT 





1.5" NPT 

2.5" NPT 

8.00" (Lgth.) 

12.50" 

7.625" 

11.625" 

7.625" 

11.625" 

19.75 

13.75 

4.50 

9.125 

3.50 

8.00


Valve Kits 

Field Service Kits for 800 and 2800 Series Apparatus 

Valves 

For all 800 and 2800 series apparatus valves • All kits contain the 

following parts: 

1 Seat 1 O-Ring for Actuator Shaft 

1 O-Ring for Seat 1 O-Ring for Pivot Bolt 

1 Seat Retainer 3 O-Rings for Body 

1 O-Ring for Seat Retainer 

Kits available for: 

890 1.0" Valve....Kit P/N 80426 

891 1.5" Valve....Kit P/N 80427 

892 2.0" Valve....Kit P/N 80428 

893 3.0" Valve....Kit P/N 80421 

896 2.5" Valve....Kit P/N 80326 

Nozzle Kits 

P/N 80800 Field Service Kit 

For all 1.0" and 1.5" nozzles and ball shutoffs (1.0" ID Ball) • Contains the 

following parts: 

1 Adjustable Seat 

1 O-Ring for Adjustable Seat 

1 Actuator Shaft O/S 

1 Drive Pin for O/S 

Actuator Shaft 

1 Actuator Shaft N/S 

1 O-Ring for Actuator Shaft 

1 Actuator Shaft Screw 

1 Handle Pivot Screw 

1 O-Ring for Pivot Screw 

1 O-Ring for Body Base 

1 Repair Instructions 

This kit can be used on the following nozzles and ball shutoffs: 

L (N/S) SFL-BG SM-10FG (O/S) 4000-01 (O/S) 

L (O/S) SFL-G (N/S) SM-10FB (N/S) 4000-02 (N/S) 

LE (N/S) SFL-G (O/S) SM-10FB (O/S) 4000-02 (O/S) 

LE (O/S) SFS (N/S) LB-275 (N/S) 4000-03 (N/S) 

L-G (N/S) SFS (O/S) LB-275 (O/S) 4000-03 (O/S) 

L-G (O/S) SFS-G (N/S) LB-275A (N/S) 4000-10 (N/S) 

NSL SFS-G (O/S) LB-275A (O/S) 4000-10 (O/S) 

S (N/S) SM-3F (N/S) LB-275GA (N/S) 4000-11 (N/S) 

S (O/S) SM-3F (O/S) LB-275GA (O/S) 4000-11 (O/S) 

S-G (N/S) SM-3FG (N/S) SB-275 (N/S) 4000-12 (N/S) 

S-G (O/S) SM-3FG (O/S) SB-275 (O/S) 4000-12 (O/S) 

SFL (N/S) SM-10F (N/S) SB-275A (N/S) 4000-13 (N/S) 

SFL (O/S) SM-10F (O/S) SB-275A (O/S) 4000-13 (O/S) 

SFL-B SM-10FG (N/S) 4000-01 (N/S) 

Appliance Kits 

2891 1.5" Valve....Kit P/N 80427 

2892 2.0" Valve....Kit P/N 80428 

2893 3.0" Valve....Kit P/N 80421 

2896 2.5" Valve....Kit P/N 80326 

P/N 80671 Field Service Kit for B-90 Series 

One Kit Required for Each 2.5" Inlet/Outlet on a: 

B-95 B-97 B-98A 

B-95A B-97A B-99 

B-96A B-98 B-99A 

Kit contains the following parts: 

1 Seat 1 O-Ring for Pivot Bolt 

1 O-Ring for Seat 1 Swivel Gasket (2.5") 


P/N 80632 Field Service Kit for B-100 (O/S) 

For B-100 gated wye • Kit contains the following parts: 

2 Adjustable Seats 

2 O-Rings for Actuator Shaft 

2 O-Rings for Adjustable Seat 

2 O-Rings for Pivot Screw 

2 O-Rings for Outlet Adapter 

Field Service Kits for 2900 Series Apparatus Valves 

For all 2900 series apparatus valves • All kits (except for 2940)* 

contain the following parts: 

1 Valve Ball* 3 O-Rings for Body 

2 Seats* 3 O-Rings for Seat Retainer 

3 O-Rings for Seat* 

Kits available for: 

2915 1.5" Valve.................. Kit P/N 81105 

2920 2.0" Valve.................. Kit P/N 81106 

2925 2.5" Valve.................. Kit P/N 81107 

2930 3.0" Valve.................. Kit P/N 81108 

2940 4.0" Valve (O/S) ....... Kit P/N 81109* 

2940 4.0" Valve (N/S......... Kit P/N 81140* 

*Kits for 2940 valve (P/N 81109 and 81140) have only 1 seat, 1 O-ring for seat, and no valve ball. 

Note: new style (N/S) 2940 has 95 embossed on body casting below heart. 

P/N 80902 Field Service Kit 

For all 1.75", 2.0", and 2.5" nozzles and ball shutoffs (1.375" ID Ball) • 

Contains the following parts: 

1 Adjustable Seat 

1 O-Ring for Adjustable Seat 

1 Actuator Shaft O/S 

1 Drive Pin for O/S 

Actuator Shaft 

1 Actuator Shaft N/S 


1 Actuator Shaft Screw 

1 Handle Pivot Screw 

1 O-Ring for Pivot Screw 

1 O-Ring for Body Base 

1 Repair Instructions 

This kit can be used on the following nozzles and ball shutoffs: 

A SM-20FG (O/S) DB-275 (N/S) 

D (N/S) SM-30F (N/S) DB-275 (O/S) 

D (O/S) SM-30F (O/S) DB-275A (N/S) 

DSF (N/S) SM-30FLP DB-275A (O/S) 

DSF (O/S) SM-30FG (N/S) DB-275AT 

DSM-30F (N/S) SM-30FG (O/S) DB-275-GAT 

DSM-30F (O/S) SM-30FGLP B-278 

DSM-30FLP SOS B-278L 

DSM-30FG B-275 (N/S) 4000-16 

DSM-30FGLP B-275 (O/S) 4000-17 

SF B-275A (N/S) 4000-20 (N/S) 

SFM B-275A (O/S) 4000-20 (O/S) 

SFM-G B-275AT 4000-23 (N/S) 

SM-20F (N/S) B-275-GA (N/S) 4000-23 (O/S) 

SM-20F (O/S) B-275-GA (O/S) 4000-26 (N/S) 

SM-20FG (N/S) B-275-GAT 4000-26 (O/S) 

P/N 80633 Field Service Kit for B-100A (O/S) (Pre ’93) 

For B-100A (O/S) gated wye • Kit contains the following parts: 

2 Adjustable Seats (Elk-o-Lite) 2 O-Rings for Actuator Shaft 

2 O-Rings for Adjustable Seat 2 O-Rings for Pivot Screw 

2 O-Rings for Outlet Adapter 

P/N 80947 Field Service Kit for B-100 or B-100A (N/S) 

For B-100A (N/S) gated wye • Kit contains the following parts: 

2 Self Adjusting Seats (UHMWPE) 2 O-Rings for Outlet Adapter 

2 O-Rings for Self 

2 O-Rings for Actuator Shaft 

Adjusting Seat 

2 O-Rings for Pivot Screw 

Field Service Kits 

Field Service Kits


Special Tools 

Special Tools 

71251 Seat Wrench (For 1.0" and 1.5" Shutoffs) 

A specially designed wrench to be used for seat adjustment and/or removal 

on all 1.0" and 1.5" nozzles and ball shutoffs (1.0" waterway). 

71252 Seat Wrench (For 1.75", 2.00", & 2.5" Shutoffs) 

A specially designed wrench to be used for seat adjustment and/or removal on 

all 1.75", 2.00", & 2.5" nozzles and ball shutoffs (1.375" waterway). 

71258 Open Face Spanner Wrench 

This adjustable open face spanner wrench is used for seat adjustments and/or removal on 800 and 

2800 series apparatus valves as well as on B-94, B-95, B-95A, B-96A, B-97, B-97A, B-98, B-98A, 

B-99, B-99A, BG-104, BG-104A appliances • It can also be used for the removal and/or installation of 

stem heads on all Select-O-Matic handline nozzles. 

71303 Open Face Spanner Wrench (Not Shown) 

This adjustable open face spanner wrench is used for removal and/or installation of stem heads on 

the J, JN, CJ, CJ-RC, CJ-B, CJ-B-RC, CJN, CJN-RC, CJN-B, CJN-B-RC, CSW, CSW-L, SM-100, 

SM-100B, SM-100E, SM-100H and SM-100HBP nozzles. 

80269 Stem Web Wrench (For Master Stream Nozzles) 

A specially designed wrench to hold the stem web (base) while removing and/or installing the stem 

head on the J, JN, CJ, CJ-RC, CJ-B, CJ-B-RC, CJN, CJN-RC, CJN-B, CJN-B-RC, CSW, CSW-L, and 

CSW-LB nozzles. 

80291 Stem Head Wrench 

A specially designed wrench to assist in the removal and/or installation of slotted stem heads in 

all handline nozzles except Select-O-Matics. 

01501 Seat Wrench For 4.5" 9786 and 9787 (Not Shown) 

A specially designed wrench to be used for seat removal/installation on a 9786 or 9787 PIV with 

a 4.5" outlet. 

01502 Seat Wrench For 5.0" and 6.0" 9786 and 9787 (Not Shown) 

A specially designed wrench to be used for seat removal/installation on a 9786 or 9787 PIV with 

a 5.0" or 6.0" outlet. 

80313 Stem Web Wrench (For Handline Nozzles) 

A specially designed wrench to hold the stem web (base) while removing and/or installing the stem 

head on most handline nozzles except Select-O-Matics. 

Special Tools 

80642 Seat Wrench (For Wyes) 

A specially designed wrench for seat adjustment and/or removal on 1.5" ball valved wyes • Hex end 

fits B-100, B-100-L, and BG-104 • Blade ends fits B-100A (O/S), B-100-LA (O/S), and BG-104A. 

603 Tool Kit 

Kit includes these special tools: 71251, 71252, 71258, 80291, 80313, and 80642.


Eductor/Nozzle Performance Chart 

This chart is designed to help you better understand the performance of portable foam eductors at various operating pressures. It will also assist 

you in selecting a nozzle that will be compatible with your new eductor. 

As you can see, all of these eductors achieve their rated flow with an inlet pressure of 200 psi. At lower pressures the water flow is less, but the 

flow of foam concentrate will remain the same. Consequently, the foam solution will be a richer mixture than the metering valve indicates. 

You will also note that at lower pressures (flows) the effective reach of the nozzles decreases. Take this into consideration when making your 

initial attack. 

Eductor 

Model 

241-30 

241-60 

or 

240-60 

241-95 

or 

240-95 

241-125 

or 

240-125 

241-150 

241-250 

Recommended Nozzles 

For Use With Eductor 

SFS or SFS-G (Set @ 30), 

4000-02 (30) 

SM-3F, SM-3FG 

SFL or SFL-G (Set @ 60), 

4000-10 (60), 4000-13 (60) 

SM-10F, SM-10FG, SM-10FB 


SFL-B or SFL-BG (Set @ 95), 

SFM or SFM-G (Set @ 95), 

SFL-N (95), SFL-GN (95), 

4000-10 (95), 4000-13 (95) 

SM-10F, SM-10FG, SM-10FB 

SM-20F, SM-20FG ♦ 


SFL-B or SFL-BG (Set @ 125), 

SFM or SFM-G (Set @ 125), 

SFL-N (125), SFL-GN (125), 

4000-10 (125), 4000-13 (125) 

SM-20F, SM-20FG ♦ 

4000-14 

4000-16 

4000-17 

(150@75) 

SM-20-FLP 

SM-20-FGLP ♦ 

Any SF Series (Set @ 250) or 

any 4000-20 Series (250) 

Any SM-30 Series 

Hose 

Inlet 

Flow Rate ❤ 

Size Pressure 

GPM L/Min. 

200 PSI 

30 

114 

1.0" 

150 PSI 

26 

98 

100 PSI 

21 

79 

200 PSI 

30 

114 

1.0" 

— 

— 

— 

— 

— 

— 

200 PSI 

60 

227 

1.5" 

150 PSI 

52 

197 

100 PSI 

42 

159 

200 PSI 

60 

227 

1.5" 

— 

— 

— 

— 

— 

— 

200 PSI 

95 

360 

1.5" 

150 PSI 

82 

310 

100 PSI 

67 

254 

200 PSI 

95 

360 

1.75" 150 PSI 

82 

310 

100 PSI 

67 

254 

200 PSI 

95 

360 

1.5" 

— 

— 

— 

— 

— 

— 

200 PSI 

95 

360 

1.75" 

— 

— 

— 

— 

— 

— 

200 PSI 

95 

360 

1.5" 

— 

— 

— 

— 

— 

— 

200 PSI 

95 

360 

1.75" 

— 

— 

— 

— 

— 

— 

200 PSI 

125 

473 

1.75" 150 PSI 

108 

409 

100 PSI 

88 

333 

200 PSI 

125 

473 

2.0" 

150 PSI 

108 

409 

100 PSI 

88 

333 

200 PSI 

125 

473 

1.75" 

— 

— 

— 

— 

— 

— 

200 PSI 

125 

473 

2.0" 

— 

— 

— 

— 

— 

— 

200 PSI 

150 

568 

1.75" 150 PSI 

130 

492 

100 PSI 

106 

401 

2.0" 

200 PSI 

150 

568 

150 PSI 

130 

492 

100 PSI 

106 

401 

1.75" 

200 PSI 

150 

568 

— 

— 

— 

— 

— 

— 

2.0" 

200 PSI 

150 

568 

— 

— 

— 

— 

— 

— 

200 PSI 

250 

946 

2.5" 

150 PSI 

217 

821 

100 PSI 

177 

670 

200 PSI 

250 

946 

2.5" 

— 

— 

— 

— 

— 

— 

Maximum 

Hose Lay* 

100' 

100' 

100' 

100' 

— 

— 

300' 

300' 

300' 

300' 

— 

— 

150' 

150' 

150' 

250' 

250' 

250' 

150' 

— 

— 

250' 

— 

— 

200' 

— 

— 

400' 

— 

— 

150' 

150' 

150' 

300' 

300' 

300' 

200' 

— 

— 

400' 

— 

— 

150' 

150' 

150' 

300' 

300' 

300' 

150' 

— 

— 

300' 

— 

— 

200' 

200' 

150' 

200' 

— 

— 

* Maximum hose lay from eductor discharge to nozzle. We recommend that you test your hose to see if this is applicable. 

** These figures are with foam solution flowing (rather than plain water) and the nozzle set on straight stream. 

❤ Total flow when picking-up 6% foam concentrate through metering valve. 

◆ SM-30F and SM-30FG can also be utilized with these eductors. Flow and reach data will differ. 

Nozzle 

Pressure 

100 PSI 

75 PSI 

49 PSI 

95PSI 

— 

— 

100 PSI 

75 PSI 

49 PSI 

92 PSI 

— 

— 

100 PSI 

75 PSI 

50 PSI 

100 PSI 

75 PSI 

50 PSI 

99 PSI 

— 

— 

99 PSI 

— 

— 

81 PSI 

— 

— 

81 PSI 

— 

— 

100 PSI 

75 PSI 

50 PSI 

100 PSI 

75 PSI 

50 PSI 

87 PSI 

— 

— 

87 PSI 

— 

— 

75 PSI 

56 PSI 

37 PSI 

75 PSI 

56 PSI 

37 PSI 

75 PSI 

— 

— 

75 PSI 

— 

— 

100 PSI 

75 PSI 

50 PSI 

91 PSI 

— 

— 

Effective 

Reach** 

74' 

63' 

57' 

65' 

— 

— 

87' 

77' 

65' 

82' 

— 

— 

99' 

92' 

77' 

99' 

92' 

77' 

86' 

— 

— 

86' 

— 

— 

97' 

— 

— 

97' 

— 

— 

101' 

92' 

76' 

101' 

92' 

76' 

96' 

— 

— 

96' 

— 

— 

110' 

92' 

76' 

110' 

92' 

76' 

110' 

— 

— 

110' 

— 

— 

120' 

105' 

83' 

124' 

— 

— 

Eductor/Nozzle Flow Data 

Eductor/Nozzle Flow Data


Nozzle Flow Data 

The flow and effective reach data found on the following pages is compiled and updated by our 

engineering staff in the testing area of our assembly department. The flow is determined by an 

electronic flowmeter while a piezometer gauge at the base/inlet of the nozzle establishes the 

“nozzle pressure.” 

The effective reach is determined by elevating the nozzle to 32 degrees above horizontal and at a 

height of 4' above ground level. The reach of Straight Stream, Narrow Fog (30 degrees) and Wide 

Fog (90 degrees) are then established by measuring where the last water droplets are falling at 

ground level. These tests are conducted in “still air” conditions, so the actual results will vary 

depending upon conditions. 

Catalog No. 

G.P.M. 

Stream 

Setting 

Discharge in U.S. GPM 

Effective Reach in Feet 

Nozzle Pressure psi 


50 75 100 150 200 300 400 500 50 75 100 150 200 300 400 500 

46 55 59 64 68 73 77 80 

11 13 14 17 18 23 25 29 25 32 34 36 38 42 46 49 

15 18 20 23 25 29 33 35 

53 65 75 81 83 84 86 87 

20 25 27 32 37 45 52 58 40 43 45 55 60 65 70 75 

24 26 30 37 39 41 45 48 

46 55 59 64 68 73 77 80 

11 12 14 17 18 23 25 29 25 32 34 36 38 42 46 49 

15 18 20 23 25 29 33 35 

53 65 75 81 83 84 86 87 

20 25 27 32 37 45 52 58 40 43 45 55 60 65 70 75 

24 26 30 37 39 41 45 48 

45 50 53 57 60 61 62 63 

5 7 10 11 12 15 18 20 20 21 23 28 31 33 35 37 

11 12 13 15 16 17 19 21 

50 62 64 68 70 73 75 77 

15 18 20 24 28 35 41 46 22 24 26 28 32 36 45 51 

15 17 19 23 25 27 30 33 

65 70 62 90 92 105 110 115 

21 27 30 36 40 50 58 64 30 35 40 46 48 50 55 59 

15 16 18 22 25 30 35 40 

S 

S-200 

S-205-B 

S-205-BAF 

SFS 

NTS-C 

12 

23 

12 

23 

10 

20 

30 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 


G.P.M. 

Stream 

Setting 





40 50 75 100 125 150 175 200 40 50 75 100 125 150 175 200 

59 65 77 83 86 90 93 96 

25 29 34 40 44 48 52 56 35 38 41 44 47 50 53 56 

29 34 36 37 39 40 41 43 

69 75 90 97 103 110 116 123 

39 44 54 60 70 77 85 92 38 40 45 50 55 60 65 70 

31 32 35 40 44 48 52 57 

77 85 102 110 117 124 131 183 

59 67 82 95 105 114 123 132 39 41 47 54 60 63 66 69 

28 30 34 38 41 45 49 52 

77 85 102 112 120 129 138 146 

79 88 105 125 140 154 168 182 45 48 55 61 66 72 78 83 

33 35 40 45 48 52 56 59 

39 

65 

81 

43 

73 

89 

51 

86 

111 

60 

101 

126 

68 

112 

141 

75 

122 

157 

81 

130 

172 

86 

136 

187 

36 

41 

46 

38 

45 

50 

45 

55 

60 

50 

65 

68 

55 

70 

75 

60 

75 

83 

70 

85 

90 

75 

95 

95 

27 

28 

28 

28 

30 

30 

32 

36 

35 

35 

43 

40 

38 

49 

45 

42 

55 

50 

48 

60 

55 

54 

65 

60 


SFL 

SFL-B 

SFL-N 

TSFL 

NTL-C 

LE 

L-205-EB 

NSL* 

* 95 G.P.M. only 

40 

60 

95 

125 

60 

95 

125 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

Narrow Fog 

Wide Fog 

Narrow Fog 

Wide Fog 

Narrow Fog 

Wide Fog



L 

L-200 

L-205-B 

L-205-BA 

SF 

TSF 

DSF 

STSF 

STDSF 

SF-800 

STSF-800 

STSFB- 

800A 

NT-C 

SOS 

D 

800-SOS 

T 

STD 

ST-800 

STB-800 

205-B 

205-BA 

205-EB* 

200 

D-200 

800 

L-205-BAF 

G.P.M. 

40 

60 

95 

125 

125 

175 

250 

170 

250 

170 

250 

20 

70 

Stream 

Setting 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

*This nozzle does not have Straight Stream capability. 





40 50 75 100 125 150 175 200 40 50 75 100 125 150 175 200 

26 28 35 41 47 51 55 58 

39 43 41 60 68 75 81 86 

65 73 88 101 112 122 130 136 

81 89 111 126 141 157 172 187 

83 90 110 125 141 153 167 179 

108 120 139 175 194 211 227 244 

160 180 218 250 280 304 327 351 

85 100 122 142 163 — — — 

103 114 139 162 178 — — — 

139 154 185 213 234 — — — 

98 108 127 145 160 — — — 

156 173 210 245 278 — — — 

203 225 278 323 368 — — — 

115 126 148 170 190 — — — 

165 188 222 245 286 — — — 

15 17 21 24 27 30 33 36 

— — — — — — — — 

— — — — — — — — 

45 50 62 72 80 88 93 99 

46 52 64 74 81 89 94 100 

63 70 86 99 111 120 130 140 

53 60 73 61 85 86 86.5 87 

37 40 42 43 44 45 48 50 

26 28 30 31 32 33 34 35 

68 75 92 103 110 115 120 123 

36 38 45 50 55 60 70 75 

27 28 32 35 38 42 48 54 

76 83 100 107 115 120 125 130 

41 45 55 65 70 75 85 95 

28 30 36 43 49 55 60 65 

91 100 118 130 140 150 155 157 

46 50 60 68 75 83 90 95 

28 30 35 40 45 50 55 60 

70 80 103 122 136 — — — 

33 35 40 45 50 — — — 

18 20 25 30 35 — — — 

86 98 113 127 140 — — — 

46 50 60 70 75 — — — 

31 32 35 40 45 — — — 

81 92 116 133 149 — — — 

43 46 54 61 68 — — — 

28 30 36 40 45 — — — 

84 92 100 108 115 — — — 

49 55 65 70 75 — — — 

31 32 37 44 47 — — — 

87 94 105 112 120 — — — 

56 60 70 75 80 — — — 

33 35 40 45 50 — — — 

84 92 95 96 102 105 108 115 

49 55 59 63 66 68 70 75 

31 32 34 35 38 42 44 47 

87 94 99 103 107 110 112 120 

56 60 64 68 71 73 75 80 

33 35 37 39 41 43 45 50 

45 50 60 70 75 80 85 90 

— — — — — — — — 

— — — — — — — — 

78 80 85 90 95 100 105 110 

28 30 33 37 40 45 50 55 

14 15 16 18 20 22 24 26 


Nozzle Flow Data




CSW 

CSW-L 

CSW-LB 

CJ 

CJ-RC 

CJ-B 

CJ-B-RC 

NT-5000 

IMS 

CJN 

CJN-RC 

CJN-B 

CJN-B-RC 

NT-1000C 

CJK 

CJK-HP 

LR 

R 

222-1.5 

222-2.5 

193-6-1.5 

193-6-2.5 

193-9-2.5 

G.P.M. 

300 

550 

750 

500 

750 

1000 

1250 

350 

500 

750 

1000 

1250 

1500 

1750 

2000 

— 

— 

— 

— 

— 

— 

— 

Stream 

Setting 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

— 

— 

— 

— 

— 

— 

— 





40 50 60 70 80 90 100 125 40 50 60 70 80 90 100 125 

190 210 230 250 270 285 300 330 

350 390 425 460 490 520 550 615 

480 535 580 625 670 715 750 830 

322 360 396 432 464 490 516 580 

490 540 595 640 680 720 750 845 

645 725 785 845 900 955 1000 — 

790 880 960 1035 1100 1160 1250 — 

222 250 270 290 310 330 350 390 

322 360 396 432 464 490 516 580 

496 550 596 640 680 716 750 840 

676 725 800 853 945 962 1000 1153 

791 884 968 1046 1118 1186 1250 1398 

949 1061 1162 1255 1342 1423 1500 1677 

1107 1237 1356 1464 1565 1660 1750 1957 

1265 1414 1549 1673 1789 1897 2000 2236 

76 85 93 100 108 115 122 134 

156 177 196 213 230 245 250 290 

62 70 76 82 88 94 100 122 

62 70 73 82 88 94 100 122 

87 99 108 117 123 132 138 153 

248 275 298 320 342 364 386 435 

304 340 374 404 432 457 481 518 

107 121 130 137 142 147 150 159 

76 87 97 104 110 115 120 128 

49 54 58 62 65 68 71 78 

135 149 162 172 181 188 194 208 

92 101 109 117 125 133 140 154 

48 52 56 60 63 67 71 81 

140 165 180 191 202 213 221 252 

94 104 114 124 133 143 152 172 

46 49 52 54 56 58 60 65 

119 134 142 150 158 165 173 190 

68 72 77 82 87 92 97 110 

36 40 44 48 52 56 60 70 

150 178 191 202 211 222 235 264 

91 105 117 129 140 150 158 175 

60 64 71 82 90 101 107 112 

168 192 215 236 251 266 278 291 

84 96 108 115 125 136 146 163 

61 69 77 84 91 102 115 119 

180 200 220 240 260 280 350 — 

104 120 135 145 155 165 175 — 

71 84 98 112 123 132 140 — 

109 125 131 137 142 146 150 155 

61 65 69 73 77 82 87 100 

41 45 49 53 56 58 60 65 

119 134 142 150 158 165 173 190 

68 72 77 82 87 92 97 110 

36 40 44 48 52 56 60 70 

148 170 184 198 212 226 238 236 

104 115 125 135 144 152 160 180 

59 65 71 77 83 89 95 105 

159 180 204 225 242 252 263 289 

80 89 98 107 117 126 135 159 

57 65 72 80 88 98 100 118 

130 150 172 191 209 230 266 292 

63 72 83 92 100 110 128 140 

49 57 65 73 79 87 101 111 

140 166 190 212 233 255 276 320 

67 80 91 102 112 122 132 154 

53 63 72 81 89 97 105 122 

150 176 200 224 248 272 296 354 

72 84 96 107 119 131 142 170 

57 67 76 85 94 103 112 135 

174 200 224 248 273 298 325 375 

84 96 107 119 131 143 156 180 

66 76 85 94 103 113 124 143 

— — — — — — — — 

— — — — — — — — 

— — — — — — — — 

— — — — — — — — 

— — — — — — — — 

— — — — — — — — 

— — — — — — — —



J 

JN 

HF-350* 

HF-500* 

G.P.M. 

350 

500 

1000 

350 

500 

Stream 

Setting 

SS 

30°-Fog 

90°-Fog 

SS 

30°-Fog 

90°-Fog 

SS 

30°-Fog 

90°-Fog 

SS 

30°-Fog 

90°-Fog 

SS 

30°-Fog 

90°-Fog 

*These flow figures computed with water only. Add 1, 3, 6% for total foam flow. 



40 50 60 70 80 90 100 125 

220 250 270 290 31 330 350 400 

340 390 425 460 490 520 545 610 

255 285 315 340 360 385 405 445 

317 352 385 415 440 470 500 550 

395 440 482 518 552 587 622 700 

459 513 562 607 649 688 725 — 

631 705 773 835 892 947 997 — 

784 876 960 1037 1108 — — — 

230 245 260 276 293 309 325 365 

345 370 390 410 432 455 475 530 



40 50 60 70 80 90 100 125 

106 118 124 129 133 137 141 150 

69 75 80 83 86 88 90 95 

50 54 57 61 64 68 71 80 

81 95 105 114 122 129 135 150 

38 40 42 44 46 48 50 55 

28 30 32 34 36 38 40 45 

120 134 142 152 160 165 170 — 

78 92 100 110 120 128 135 — 

40 45 55 60 65 — — — 

80 95 110 124 134 140 145 155 

42 47 52 57 62 68 73 80 

13 14 15 16 17 18 20 23 

97 110 123 136 145 155 162 175 

52 57 61 66 71 76 80 92 

18 20 22 23 25 27 29 31 



SM-3F 

SM-10F 

SM-10FB 

TSM-10F 

STSM-10F 

SM-20F 

TSM-20F 

STSM-20F 

SM-30F 

TSM-30F 

DSM-30F 

SM-30PL 

STSM-30PBA 

SM-30-FLP 

(Low Pressure) 

SM-100 

Series 

SM-2000 

SM-2000E 

Stream 

Setting 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 



50 60 70 75 80 85 90 95 100 105 110 

5 7 9 11 14 17 22 30 35 47 56 

40 43 46 48 50 52 57 65 100 130 148 

50 55 64 73 87 105 130 170 212 234 245 

50 69 88 112 150 190 226 264 300 324 342 

— 87 175 220 260 300 — — — — — 

— — — — 200 300 425 650 1000 — — 

500 850 1250 1500 2000 — — — — — — 



75 80 85 90 95 100 105 110 

52 53 55 64 72 77 94 98 

22 25 27 33 36 39 46 48 

12 13 14 18 20 24 36 37 

78 80 82 84 88 98 104 112 

42 43 46 48 52 65 69 72 

28 29 31 32 34 39 41 43 

88 96 103 114 120 124 126 — 

50 52 55 58 60 62 63 — 

22 23 25 28 29 30 31 — 

105 120 133 137 141 145 148 — 

69 75 75 75 76 76 76 — 

38 40 41 43 45 46 45 — 

135 140 145 — — — — — 

70 75 75 — — — — — 

42 44 46 — — — — — 

— — 179 190 217 260 — — 

— — 124 132 135 144 — — 

— — 67 77 89 94 — — 

240 300 — — — — — — 

125 148 — — — — — — 

90 100 — — — — — — 





4000-01 

4000-02 

4000-03 

4000-10 

4000-11 

4000-12 

4000-13 

4000-14 

4000-15 

4000-20 

4000-21 

4000-23 

4000-24 

4000-25 

4000-26 

4000-27 

4000-28 

4000-29 

205-BA 

G.P.M. 

15 

30 

45 

60 

60 

95 

125 

150 

175 

250 

325 

125 

@ 

75 

200 

@ 

75 

200 

@ 

50 

Stream 

Setting 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 



40 50 75 100 125 150 175 200 

9 11 12 15 17 18 20 22 

20 22 26 30 34 37 39 41 

32 35 40 45 49 52 56 58 

39 43 52 60 66 72 78 84 

38 43 51 60 68 76 — — 

63 68 83 95 107 115 — — 

82 91 110 125 140 153 — — 

97 107 132 150 169 182 — — 

111 124 150 175 192 210 — — 

172 192 230 256 290 320 — — 

220 240 289 325 362 398 — — 

91 102 125 144 161 176 — — 

146 163 200 231 258 283 — — 

179 200 245 245 316 — — — 



40 50 75 100 125 150 175 200 

— 48 56 58 61 63 65 66 

— 20 22 34 26 28 31 32 

— 11 14 15 17 19 21 22 

— 65 70 61 85 90 91 92 

— 30 35 41 44 47 48 49 

— 15 16 19 21 23 25 26 

— 69 75 56 91 96 98 101 

— 32 37 44 46 48 50 51 

— 17 18 21 23 25 26 28 

— 74 85 94 100 104 109 113 

— 39 41 45 50 54 58 62 

— 28 30 36 40 42 47 55 

69 76 89 96 104 110 115 124 

38 41 44 49 55 61 66 71 

31 33 35 41 43 47 51 58 

77 86 101 111 118 126 130 138 

40 41 46 55 59 64 67 70 

29 30 33 36 40 44 47 51 

78 86 103 113 121 128 138 146 

44 48 55 62 67 71 77 84 

32 36 39 44 49 52 56 59 

80 89 108 124 138 148 156 162 

46 51 53 56 58 60 62 64 

34 37 43 46 48 51 52 55 

88 98 114 126 141 152 — — 

47 51 59 69 76 81 — — 

32 34 36 39 44 48 — — 

91 102 118 136 152 164 — — 

53 56 62 75 79 83 — — 

35 40 43 47 51 54 — — 

97 108 126 142 160 173 — — 

57 61 67 70 86 89 — — 

39 43 47 52 55 59 — — 

81 89 92 95 99 104 — — 

43 50 54 57 61 63 — — 

29 30 32 34 36 38 — — 

85 93 96 98 104 108 — — 

52 56 62 65 69 71 — — 

32 34 35 37 40 43 — — 

89 96 102 106 110 — — — 

58 61 65 70 73 — — — 

35 37 39 40 42 — — — 




L-205-BA 

4000-10 

4000-11 

4000-12 

4000-13 

4000-14 

4000-16 

4000-17 

4000-20 

4000-21 

4000-22 

4000-23 

4000-24 

4000-25 

4000-26 

4000-27 

4000-28 

4000-29 

4000-31 

4000-35 

G.P.M. 

125 

@ 

75 psi 

125 

@ 

75 psi 

125 

@ 

75 psi 

150 

@ 

75 psi 

175 

@ 

75 psi 

150 

@ 

50 psi 

185 

@ 

75 psi 

200 

@ 

75 psi 

250 

@ 

75 psi 

300 

@ 

75 psi 

250 

@ 

50 psi 

Stream 

Setting 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 

SS 

Narrow Fog 

Wide Fog 



40 50 75 100 125 150 175 200 

91 102 125 144 161 176 — — 

91 102 125 144 161 176 — — 

91 102 125 144 161 176 — — 

110 122 150 173 194 212 — — 

128 143 175 202 — — — — 

134 150 184 212 — — — — 

135 151 185 214 239 262 — — 

146 163 200 231 258 283 — — 

183 204 250 289 323 353 — — 

219 245 300 346 — — — — 

224 250 306 353 — — — — 



40 50 75 100 125 150 175 200 

92 101 119 130 141 150 — — 

47 51 61 69 76 84 — — 

29 31 36 41 46 51 — — 

79 88 106 122 135 145 — — 

45 50 52 55 57 59 — — 

34 37 43 46 48 51 — — 

79 88 106 122 135 145 — — 

45 50 52 55 57 59 — — 

34 37 43 46 48 51 — — 

82 91 110 126 140 150 — — 

47 52 54 57 59 61 — — 

34 37 43 46 48 51 — — 

85 94 113 130 — — — — 

49 54 56 59 — — — — 

35 38 44 47 — — — — 

87 96 115 133 — — — — 

50 55 57 60 — — — — 

35 38 44 47 — — — — 

89 100 115 130 145 155 — — 

50 53 60 72 77 82 — — 

33 35 39 43 47 51 — — 

91 101 117 132 148 159 — — 

51 54 61 73 78 83 — — 

34 36 40 44 48 52 — — 

93 103 118 137 154 165 — — 

54 57 64 75 80 84 — — 

36 40 44 47 52 55 — — 

97 108 126 142 — — — — 

57 61 67 77 — — — — 

39 43 47 52 — — — — 

98 109 127 144 — — — — 

57 61 67 77 — — — — 

3 43 47 52 — — — — 


Nozzle Reaction Formulae 

STRAIGHT BORE NOZZLES 

NR = 1.5 d 2 NP 

Where NR = Nozzle Reaction (Pounds) 

d = Nozzle Diameter (Inches) 

NP = Nozzle Pressure (psi) 

1.5 is a constant 

COMBINATION FOG NOZZLES 

NR = 0.0505 Q√P 

Where NR = Nozzle Reaction (Pounds) 

Q = Flow (GPM) 

P = Nozzle Pressure (psi at base of nozzle) 

0.0505 is a constant 

This formula is with nozzle set on straight stream. 

Reaction will decrease as pattern is widened to fog. 



Smooth Bore Discharge Data 

Smooth Bore Discharge Data 

Discharge of Smooth Bore Nozzles/Tips 

Nozzle 

Nozzle Diameter in Inches 

Pressure .25" .375" .438" .5" .625" .75" .875" .938" 1.0" 1.125" 

in psi* 

Gallons Per Minute 

1.25" 1.375" 1.5" 1.625" 

20 8 18 25 33 51 75 101 115 132 167 206 250 298 350 

22 8 19 26 34 54 79 105 122 139 175 216 263 313 367 

24 8 20 27 36 56 82 110 127 145 183 226 275 327 384 

26 9 21 29 37 59 85 115 133 151 191 235 286 340 400 

28 9 21 30 39 61 89 119 138 157 198 244 297 353 415 

30 10 22 31 40 63 92 123 142 162 205 253 307 365 429 

32 10 23 32 41 65 95 127 147 167 212 261 317 377 443 

34 11 23 33 43 67 98 131 152 172 218 269 327 389 457 

36 11 24 34 44 69 100 135 156 177 224 277 336 400 470 

38 11 25 35 45 71 103 138 160 182 231 285 345 411 483 

40 11 26 35 46 73 106 142 165 187 237 292 354 422 496 

42 11 26 36 47 74 109 146 169 192 243 299 363 432 508 

44 12 27 37 49 76 111 149 173 196 248 306 372 442 520 

46 12 28 38 50 78 114 152 176 200 254 313 380 452 531 

48 12 28 39 51 80 116 156 180 205 259 320 388 462 543 

50 13 29 40 52 81 118 159 184 209 265 326 396 472 554 

52 13 29 40 53 82 121 162 188 213 270 333 404 481 565 

54 13 30 41 54 84 123 165 191 217 275 339 412 490 576 

56 13 30 42 55 86 125 168 195 221 280 345 419 499 586 

58 13 31 43 56 87 128 171 198 225 285 351 426 508 596 

60 14 31 43 57 89 130 174 201 229 290 357 434 517 607 

62 14 32 44 58 90 132 177 205 233 295 363 441 525 617 

64 14 32 45 59 92 134 180 208 237 299 369 448 533 627 

66 14 33 46 60 93 136 182 211 240 304 375 455 542 636 

68 14 33 46 60 95 138 185 214 244 308 381 462 550 646 

70 15 34 47 61 96 140 188 218 247 313 386 469 558 655 

72 15 34 48 62 97 142 191 221 251 318 391 475 566 665 

74 15 35 48 63 99 144 193 224 254 322 397 482 574 674 

76 15 35 49 64 100 146 196 227 258 326 402 488 582 683 

78 15 36 50 65 101 148 198 230 261 330 407 494 589 692 

80 16 36 50 66 103 150 201 233 265 335 413 500 596 700 

82 16 37 51 66 104 152 204 235 268 339 418 507 604 709 

84 16 37 51 67 105 154 206 238 271 343 423 513 611 718 

86 16 37 52 68 107 155 208 241 274 347 428 519 618 726 

88 16 38 53 69 108 157 211 244 277 351 433 525 626 735 

90 17 39 53 70 109 159 213 248 280 355 438 531 633 743 

92 17 39 54 70 110 161 215 249 283 359 443 537 640 751 

94 17 39 54 71 111 162 218 252 286 363 447 543 647 759 

96 17 40 55 72 113 164 220 255 289 367 452 549 654 767 

98 17 40 55 73 114 166 223 257 292 370 456 554 660 775 

100 18 41 56 73 115 168 225 260 295 374 461 560 667 783 

105 18 42 57 75 118 172 230 266 303 383 473 574 683 803 

110 19 43 59 77 121 176 236 273 310 392 484 588 699 822 

115 19 43 60 79 123 180 241 279 317 401 495 600 715 840 

120 19 44 61 80 126 183 246 285 324 410 505 613 730 858 

125 20 45 63 82 129 187 251 291 331 418 516 626 745 876 

130 20 46 64 84 131 191 256 295 337 427 526 638 760 893 

135 21 47 65 85 134 195 262 302 343 435 536 650 775 910 

140 21 48 66 87 136 198 266 308 350 443 546 662 789 927 

145 21 49 68 88 139 202 271 313 356 450 556 674 803 944 

150 22 50 69 90 141 205 275 318 362 458 565 686 817 960 

175 24 55 74 97 152 218 298 344 390 494 610 740 883 1030 

200 26 59 79 104 162 234 318 368 418 527 653 790 944 1103 

* Nozzle pressure measured by pitot tube and gauge. 

Formula for Discharge of Smooth Bore Nozzles: 

GPM = 29.71 d 2 √NP 

GPM = Gallons per minute 

29.71 = Constant 

d = Diameter of nozzle orifice (inches) 

NP = Nozzle pressure (psi) measured by pitot tube and gauge 

1.75" 1.875" 2.0" 2.25" 2.5" 3.0" 

407 468 532 674 832 1200 

427 490 557 707 872 1255 

446 512 582 739 910 1311 

464 533 606 769 949 1366 

481 554 629 799 985 1418 

498 572 651 826 1017 1470 

514 591 673 854 1050 1515 

530 610 693 880 1082 1561 

546 627 713 905 1114 1610 

561 645 733 930 1144 1650 

575 661 752 954 1174 1692 

589 678 770 978 1203 1737 

603 694 788 1000 1231 1776 

617 710 806 1021 1259 1816 

630 725 824 1043 1286 1854 

643 740 841 1065 1313 1895 

656 754 857 1087 1339 1930 

668 769 873 1108 1364 1968 

680 782 889 1129 1389 2000 

692 796 905 1149 1417 2020 

704 810 920 1167 1438 2075 

716 823 936 1187 1463 2108 

727 836 951 1206 1490 2140 

738 850 965 1224 1510 2175 

750 862 980 1242 1532 2205 

761 875 994 1260 1558 2240 

771 887 1008 1278 1579 2275 

782 900 1023 1296 1600 2300 

792 911 1036 1313 1620 2340 

803 924 1050 1330 1640 2370 

813 935 1063 1347 1665 2400 

823 946 1076 1364 1685 2425 

833 959 1089 1380 1707 2460 

843 970 1102 1396 1723 2485 

853 981 1115 1412 1745 2515 

862 992 1128 1429 1762 2540 

872 1002 1140 1445 1785 2565 

881 1012 1152 1460 1802 2600 

890 1022 1164 1476 1822 2625 

900 1032 1176 1491 1840 2650 

909 1043 1189 1506 1860 2680 

932 1070 1218 1542 1908 2745 

954 1095 1247 1579 1950 2810 

975 1120 1275 1615 1995 2875 

996 1144 1303 1649 2020 2940 

1016 1168 1329 1683 2080 3000 

1036 1191 1356 1717 2120 3055 

1056 1213 1382 1750 2160 3110 

1076 1235 1407 1780 2200 3170 

1095 1257 1432 1812 2240 3225 

1114 1279 1456 1843 2260 3280 

1200 1380 1572 1985 2460 3540 

1283 1472 1680 2123 2635 3785


Friction Loss in Rubber or Vinyl Lined Fire Hose 

Flow In Pressure Loss in PSI per 100' Hose Equal Length 

U.S. Gallons 

Siamesed Lines 

Per Minute .75" 1.0" 1.5" 1.75" 2.0" 2.5" 3.0" 3.5" 4.0" 5.0" 6.0" 2-2.5" 3-2.5" 2-3.0" 

10 13.5 3.5 

20 50 12.5 

30 105 26 

40 44 4.5 3 1 

60 92 10 5 2.5 

95 22 11 5 

100 25 12 6 3 1 

125 37 21 10 4 1 

150 54 26 13.5 6 2 

175 34 18 8 3 

200 45 24 10 4 2 

225 57 30 12 4.5 2 

250 70 37.5 15 6 2.5 

275 82 45 17.5 7 3 

300 95 54 21 8 3.5 2 6 3 2 

325 65 24.5 9.5 4 2.5 6.5 3 2.5 

350 78 28 11 5 2.5 8 3.5 3 

400 96 36 14 6 3 1 10 4.5 4 

450 45 17.5 8 4 1.5 12.5 6 5 

500 55 21 9.5 5 2 15.5 7 6 

550 25.5 11.5 6 2 18.5 8.5 7 

600 30 13.5 7 2.5 23 10 8.5 

650 35 15.5 8.5 3 25.5 12 10 

700 40.5 18 9.5 3.5 1 29.5 13.5 11.5 

750 46 20 11.5 4 1 33.5 15.5 13 

800 53 23 12.5 4.5 1.5 38 17.5 14.5 

850 25.5 14.5 5 1.5 43 20 16.5 

900 28 16 5.5 2 48 22.5 18.5 

950 31 17.5 6 2 25 20.5 

1000 34 19 6.5 2.5 28 22.5 

1100 41 23 8 3 33 27 

1200 49 27.5 9.5 4 39 32 

1300 57 32.5 11 4.5 45 38 

1400 66.5 38 13 5 52 44 

1500 76.5 43 15 6 60 50 

1750 59 20 8 

2000 77 26.5 10.5 

2500 41.5 16.5 

Note: These friction loss figures will vary accordingly with age and manufacturer of hose. 

Metric Conversions 

Friction Loss Data 

When You Know Multiply by To Convert to 

LENGTH 

Inches (in) x 25.4 Millimeters (mm) 

Inches (in) x 2.54 Centimeters (cm) 

Feet (ft) x 30.48 Centimeters (cm) 

Yards (yd) x .914 Meters (m) 

Millimeters (mm) x .039 Inches (in) 

Centimeters (cm) x .394 Inches (in) 

Meters (m) x .094 Yards (yd) 


MASS 

Ounces (oz) x 28.349 Grams (g) 

Pounds (lb) x .454 Kilograms (kg) 

Grams (g) x .035 Ounces (oz) 

Kilograms (kg) x 2.205 Pounds (lb) 


LIQUID VOLUME 

Quarts (qt) x .946 Liters (l) 

Gallons (gal) x 3.785 Liters (l) 

Liters (l) x 1.057 Quarts (qt) 

Liters (l) x .2642 Gallons (gal) 

PRESSURE 

Pounds per square inch (psi) x 6.895 Kilopascals (kpa) 

Kilopascals (kpa) x .145 Pounds per square inch (psi) 

Bars x 14.4 Pounds per square inch (psi) 

Friction Loss Data


Thread and Flange Data 

Standard Fire Hose Threads 

Size ODM TPI 

Nat'l. Hose Thread (NHT) 

.75 1.3750 8 

1 1.3750 8 

1.25 1.6718 9 

1.5 1.9900 9 

2 2.5156 8 

2.5 3.0686 7.5 

.3 3.6239 6 

3.5 4.2439 6 

4 5.000 4 

4.5 5.7609 4 

5 6.260 4 

6 7.025 4 

Nat'l. Pipe Straight Hose 

.75 

1 

1.25 

1.5 

2 

2.5 

3 

3.5 

4 

4.5 

Thread (NPSH) 

1.0353 

1.2951 

1.6399 

1.8788 

2.3528 

2.843 

3.4700 

3.9700 

4.4700 

4.9700 

14 

11.5 

11.5 

11.5 

11.5 

8 

8 

8 

8 

8 

Size ODM TPI Size ODM TPI 

Eastern Hose Thread NY Corp. Thread 

.75 1.0781 11 1.5 2.093 11 

1 1.4219 11 2 2.547 11 

1.25 1.6875 11.5 2.5 3.000 8 

1.5 2.1250 11 Chicago FD Thread 

2 2.6719 7.5 

2.5 3.0000 8 

Pacific Coast Thread 

1.0625 11 

1.3125 11.5 

1.8600 11 

2.1000 11 

2.5500 10 

3.0350 7.5 

.75 

1 

1.25 

1.5 

2 

2.5 

1 

1.5 

2 

2.5 

3 

3.5 

4 

4.5 

NYFD Thread 

1.660 

2.100 

2.530 

3.030 

3.630 

4.070 

4.610 

5.800 

8 

8 

8 

8 

8 

8 

8 

4 

Underwriter Tip Thread 

1.5 2.1875 12 

1 

1.5 

2.5 

3.5 

4 

4.5 

5 

1.375 

1.933 

2.990 

4.052 

5.000 

5.7609 

6.260 

8 

11.5 

7.5 

8 

4 

4 

4 

Chicago Hose Thread 

1.0810 11.5 

1.2951 11.5 

1.7050 11.5 

1.9460 11.5 

2.5220 8 

.75 

1 

1.25 

1.5 

2 

2.5 3.0430 7 

Standard Chemical Thread 

.75 1.375 8 

Canadian Standard 

Assoc. Thread (CSA) 

1.5 

2.5 

1.8788 

3.1250 

11.5 

5 

Size ODM TPI 

Quebec Standard 

Thread (QST) 

2.5 3.046 7 

Alberta Mutual Aid 

Thread (AMA) 

2.5 2.990 8 

British Columbia (BCT) 

2.5 3.000 8 

Western Canada Fire 

Underwriters Thread 

2.5 3.250 6 

Buffalo, NY Thread 

2.5 3.065 8 

Cincinnati, OH Thread 

2.5 3.058 6 

Cleveland, OH & 

Omaha, NE Thread 

2.5 3.0781 8 

Detroit, MI Thread 

2.5 3.125 7.5 

Pittsburgh, PA Thread 

2.5 3.0625 6 

Toledo, OH Thread 

2.5 3.000 8 

Suction Hose Threads 

Size ODM TPI 

American LaFrance 

Thread 

4.0 

4.5 

5 

6 

4.0 

4.5 

5 

6 

4.0 

4.5 

5 

6 

4.0 

4.5 

5 

6 

5.085 

5.750 

6.150 

7.000 

Mack Thread 

4.999 

5.7609 

6.230 

6.955 

Maxim Thread 

5.000 

5.750 

6.250 

7.000 

Pirsch Thread 

5.000 

5.750 

6.250 

7.000 

4 

4 

4 

4 

4 

4 

4 

4 

4 

4 

4 

4 

4 

4 

4 

4 

Size ODM TPI 

Seagrave Thread 

4.0 

4.5 

5 

6 

5.000 

5.750 

6.250 

7.000 

4 

4 

4 

4 

Hale Fire Pump Thread 

4.0 5.000 4 

4.5 5.7609 4 

5 6.250 4 

6 7.250 4 

Ward LaFrance Thread 

4.0 5.000 4 

4.5 5.750 4 

5 6.250 4 

6 7.000 4 

Waterous Fire Pump 

Thread 

4.0 

4.5 

5 

6 

5.0109 

5.7609 

6.260 

7.261 

4 

4 

4 

4 

Flange Specifications 

ANSI Flange Size 2.5" - 150# 3.0" - 150# 3.0" - 300# 4.0" - 150# 4.00" - 300# 6.0" - 150# 6.0" - 300# 

Diam. of flange 

Bolt circle diam. 

Bolt hole diam. 

No. bolt holes 

Bolt diameter 

7.00" 

5.50" 

.750" 

4 

.625" 

7.50" 

6.00" 

.750" 

4 

.625" 

8.25" 

6.625" 

.875" 

8 

.750" 

9.00" 

7.50" 

.750" 

8 

.625" 

10.00" 

7.875" 

.875" 

8 

.750" 

11.00" 

9.50" 

.875" 

8 

.750" 

12.50" 

10.625" 

.875" 

12 

.750" 

Thread and Flange Data 

Methods for Determining Thread Dimensions 

If Leaf Thread Gauge and Thread Caliper are not available; or sample cannot be sent, the following 

method may be used to obtain the needed information about threads. 

1. Cut a strip of paper about 1" wide and long enough to completely encircle the 

male thread. 

2. Wrap this paper snugly around the male thread making sure it is against the 

shoulder all the way around. 

3. Pierce the paper with a pin at some point where the paper overlaps. 

4. Press firmly against the threads with finger. This impression in the paper is used 

to determine the threads per inch. 

5. Remove strip and circle pin holes with pencil. 

6. The distance between the pin holes divided by 3.1416 equals the ODM (outside 

diameter of the male). 

Both the ODM and the threads per inch are needed for ordering purposes. Sharp “V” thread form 

supplied unless otherwise specified.


Hydrant Discharge Formula 

To obtain the flow from hydrant outlets use the same formula as given 

for smooth bore nozzles but use the factor “C” equal to 0.90. Every Fire 

Department should check the flow from their hydrants. This can be done 

simply and easily using only a cap with a pressure gauge attached. 

Merely place the gauge on one outlet, open the hydrant and read the 

gauge. Remove another cap, open the hydrant and read the gauge again 

and obtain the gallons per minute using the above method or from the 

discharge table for hydrant outlets. Then to obtain the maximum amount 

of water available from the discharge table for hydrant outlets. Then to 

obtain the maximum amount of water available from the hydrant in gallons 

per minute with a residual of 10 lbs. (which is the lowest you should 

draw down the pressure on the hydrant) use the following formula. 

Definitions 

A = B x √P1—10 

√P1—P2 

Where A = Gallons per minute available at 10 lbs residual. 

B = Gallons per minute obtained. 

P1 = Static pressure on hydrant with no water flowing. 

P2 = Residual pressure on hydrant with water flowing. 

Discharge Table for Hydrant Outlets 

Outlet 

Pressure 

in lbs. 

Static Pressure – The word “static” means at rest or without motion. Pressure on water may be produced by an elevated water supply, by 

atmospheric pressure, or by a force pump. If the water is not moving, the pressure exerted is static. In water distribution systems there is 

always some flow in the pipes because of normal domestic or industrial needs. A true static pressure is, therefore, seldom found in municipal 

water systems. From a practical viewpoint, however, the pressure normally found in a water system before water flows from a hydrant, is considered 

to be static pressure. A water flow definition of static pressure could be as follows: “Static pressure is stored potential energy that is 

available to force water through pipe, fittings, fire hose, and adapters.” 

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

12 

13 

14 

15 

Outlet Diameter-inches 

2.5 3 4 4.5 

U.S. Gallons per Minute 

170 

240 

290 

340 

380 

410 

440 

480 

500 

530 

560 

580 

610 

630 

650 

240 

340 

420 

480 

540 

590 

640 

680 

730 

760 

800 

840 

870 

900 

940 

430 

610 

740 

860 

960 

1050 

1140 

1220 

1290 

1360 

1430 

1490 

1550 

1610 

1660 

540 

770 

940 

1090 

1220 

1340 

1440 

1540 

1640 

1730 

1810 

1890 

1960 

2040 

2110 

Outlet 

Pressure 

in lbs. 

16 

17 

18 

19 

20 

22 

24 

26 

28 

30 

32 

34 

36 

38 

40 

Outlet Diameter-inches 

2.5 3 4 4.5 

U.S. Gallons per Minute 

670 

690 

710 

730 

750 

790 

820 

860 

890 

920 

950 

980 

1010 

1040 

1060 

970 

1000 

1030 

1050 

1080 

1130 

1180 

1230 

1280 

1320 

1370 

1410 

1450 

1490 

1530 

1720 

1770 

1820 

1870 

1920 

2020 

2110 

2190 

2280 

2350 

2430 

2510 

2580 

2650 

2720 

2180 

2240 

2310 

2370 

2430 

2550 

2660 

2770 

2880 

2980 

3080 

3170 

3260 

3350 

3440 

Hydrant Discharge Data 

Residual Pressure – The word “residual” means a remainder, or that which is left. As an example, during a fire flow test, the term residual 

represents the pressure which is left in a distribution system within the vicinity of one or more flowing hydrants. Residual pressure in a water 

distribution system will vary depending upon the amount of water that may be flowing from one or more hydrants and upon water consumption 

demands. One point that must be remembered is that residual pressure must be identified at the location where the reading is taken. A 

water flow definition of residual pressure could be as follows: “Residual pressure is that part of the total available pressure that is not used to 

overcome friction or gravity while forcing water through pipe, fittings, fire hose, and adapters.” 

Flow Pressure – The rate of flow or velocity of the water coming from a discharge opening produces a force which is called flow pressure or 

velocity pressure. Since a stream of water emerging from a discharge opening is not encased within a tube, it exerts pressure in a forward 

direction but does not exert a sidewise pressure. The forward velocity or flow pressure can be measured by using a Pitot tube and gauge. If 

the size of opening is known, the flow pressure can be used to calculate the quantity of water flowing in gallons per minute (GPM). A water 

definition of flow pressure can be as follows: “Flow pressure is the forward velocity pressure at a discharge opening while water is flowing.” 

An example of flow pressure is one in which the forward velocity of a water stream exerts a pressure that can be read on a gauge. 

Normal Operating Pressure – Normal operating pressure is that pressure which flowing water exerts against the wall of a conduit; i.e. pipe, 

fire hose, appliances, valves, fittings, etc. The difference between static and normal operating pressure is the friction loss caused by the water 

flowing through these conduits. As soon as water starts to flow, static pressure no longer exists. The demands for water sometimes change 

during fireground operations, so therefore, normal operating pressures will change also. A piezometer gauge is used to determine this type of 

pressure. A water flow definition of it would be as follows: “Normal operating pressure is that pressure which flowing water exerts against the 

wall of the conduit through which it flows in a distribution system.” 

Friction Loss – If an opening is made in a closed system of piping or fire hose, a difference in pressure will exist between the internal pressure 

and the atmospheric pressure outside the pipe or hose. This difference in pressure causes the water to flow toward the lesser pressure. Water 

flowing through pipe or fire hose meets certain resistances or friction which must be overcome by pressure. This loss of pressure is usually 

called friction loss or loss because of friction. The only pressure available to overcome this resistance is the total pressure. A fire stream definition 

of friction loss could be as follows: “Friction loss is that part of total pressure that is lost while forcing water through pipe, fittings, fire 

hose, and appliances.” The differences in pressure on a hose line between a nozzle and a pumper is a good example of friction loss. 

Hydrant Discharge Data



Select-O-Matic ® Handline Nozzles (SM Series) 

Nozzle shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have heat tempered, stainless steel spring mechanism, outside 

unobstructed waterway, which reacts automatically to water flow and delivers that water flow efficiently throughout the specified flow range; shall 

have infinite pattern selection from straight stream to full fog; shall be constant flow; shall be capable of flushing without shutting down; shall have 

replaceable spinning teeth; shall have highly visible, protective urethane bumper; shall have hydraulically balanced acetal ball with adjustable neoprene 

seat; shall have rugged aluminum bronze shutoff handle with double stops; and shall have a flow range of 75 to 325 GPM (SM-30F series), 

60 to 200 GPM (SM-20F series), 60 to 125 GPM (SM-10F series) or 10-75 GPM (SM-3F series); shall comply with NFPA 1964. 

Chief ® Handline Nozzles (4000 Series) 

Nozzle shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall be single gallonage and constant flow; shall have infinite pattern 

selection from straight stream to full fog; shall be capable of flushing without shutting down; shall have replaceable spinning teeth; shall have highly 

visible, protective urethane bumper; shall have hydraulically balanced acetal ball with adjustable neoprene seat; shall have rugged aluminum 

bronze shutoff handle with double stops; shall flow ___ GPM at ___ psi and have gallonage stamped on stem head; shall comply with NFPA 1964. 

Chief ® Handline Nozzle Tip (4000-14) 

Handline nozzle tip shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall be single gallonage and constant flow; shall have 

infinite pattern selection from straight stream to wide fog; shall be capable of flushing without shutting down; shall have replaceable spinning teeth 

(or replaceable molded rubber fixed teeth); shall have highly visible, protective, urethane bumper; shall flow ___ GPM at ___ psi and have gallonage 

stamped on stem head; and shall have a 1.5" threaded swivel base. 



infinite pattern selection from straight stream to wide fog; shall be capable of flushing without shutting down; shall have replaceable spinning teeth 

(or replaceable molded rubber fixed teeth); shall have highly visible, protective, urethane bumper; shall be capable of twisting to shutoff; shall flow 

___ GPM at ___ psi and have gallonage stamped on stem head; and shall have a 1.5" threaded swivel base. 


Handline nozzle tip shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall be single gallonage and constant flow; shall have infinite pattern 

selection from straight stream to wide fog; shall be capable of flushing without shutting down; shall have replaceable spinning teeth; shall have highly 

visible, protective urethane bumper; shall flow ____GPM at ____psi and have gallonage stamped on stem head; and shall have a 1.5" threaded swivel base. 



infinite pattern selection from straight stream to wide fog; shall be capable of flushing without shutting down; shall have replaceable spinning teeth; 

shall have highly visible, protective, urethane bumper; shall be capable of twisting to shutoff; shall flow ___ GPM at ___ psi and have gallonage 

stamped on stem head; and shall have 1.5" threaded swivel base. 

Select-O-Flow ® Handline Nozzles (SF Series) 

Nozzle shall be constructed of rugged, chrome plated brass and durable, hard anodized Elk-O-Lite; shall have slotted, locking gallonage selector; 

shall have infinite pattern selection from straight stream to full fog; shall be constant flow; shall be capable of flushing without shutting down; shall 

have protective EPDM bumper; shall have hydraulically balanced acetal ball with adjustable neoprene seat; shall have rugged aluminum bronze 

shutoff handle with double stops; shall have adjustable gallonage settings of 10-20-30 GPM (SFS series), 40-60-95-125 GPM (SFL series), or 125- 

175-250 GPM (SF series); shall comply with NFPA 1964. 

Select-O-Flow ® Mid-Range Nozzle (SFM Series) 

Shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have internal, ball detent gallonage selector; shall have infinite pattern 

selection from straight stream to full fog; shall be constant flow; shall be capable of flushing without shutting down; shall have replaceable teeth; 

shall have heavy-duty urethane protective bumper; shall have rugged aluminum bronze shutoff handle with double stops; shall have adjustable gallonage 

settings of 95-125-150-175-200 GPM; shall comply with NFPA 1964. 


SFL-CG 1.5" Foam Nozzle (Coast Guard Approved) 

Nozzle shall be constructed of rugged, corrosion resistant brass and bronze alloys; shall have adjustable stream from straight stream to full wide 

fog with slotted, locking pattern selector; shall be constant flow; shall be capable of flushing without shutting down; shall have molded urethane 

protective bumper; shall have hydraulically balanced acetal ball with self-adjusting UHMWPE seat; shall have heavy-duty manganese/bronze shutoff 

handle with single stop; shall flow 95 gpm at 100 psi; shall have 1.5" NHT free swivel base; shall have USCG Approval number 162.027/14/0, 

CFR46-162.027/14; shall have cast finish. 

SFL-GCG 1.5" Foam Nozzle with Pistol Grip (Coast Guard Approved) 

Nozzle shall be constructed of rugged, corrosion resistant brass and bronze alloys; shall have adjustable stream from straight stream to full wide 

fog with slotted, locking pattern selector; shall be constant flow; shall be capable of flushing without shutting down; shall have molded urethane 

protective bumper; shall have hydraulically balanced acetal ball with self-adjusting UHMWPE seat; shall have heavy-duty manganese/bronze shutoff 

handle with single stop; shall flow 95 gpm at 100 psi; shall have 1.5" NHT free swivel base; shall have durable, cast pistol grip; shall have USCG 

Approval number 162.027/12/0, CFR46-162.027; shall have cast finish.


Elk-O-Lite ® Mystery Nozzle Tip (L-205-BA) 

Handline nozzle tip shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have fixed tooth design with heavy-duty, protective, 

urethane bumper; shall be fully adjustable from wide fog to straight stream to shut-off; shall flow ____ GPM at ___ psi; shall be single gallonage 

design with gallonage stamped on stem head; shall have two-piece, floating stem; and shall have a 1.5" female threaded base. 

Elk-O-Lite ® Mystery Nozzle Tip (205-BA) 

Handline nozzle tip shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have fixed tooth design with heavy-duty, protective, 

urethane bumper; shall be fully adjustable from wide fog to straight stream to shutoff; shall flow ___ GPM at ___ psi; shall be single gallonage 



Elk-O-Lite ® Mystery Nozzle Tip (D-205-BA) 

Handline nozzle tip shall be constructed of durable, hard anodized, lightweight, Elk-O-Lite; shall have fixed tooth design with heavy-duty, protective, 

urethane bumper; shall be fully adjustable from wide fog to straight stream to shutoff; shall flow ___ GPM at ___ psi; shall be single gallonage 


Elk-O-Lite ® Ball Shutoff (LB-275A and LB-275-GA) 

Quarter turn, ball valved, handline shutoff with 1.0" waterway; shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have 

rugged aluminum/bronze horseshoe handle with double stops; shall have hydraulically balanced acetal valve ball with an adjustable neoprene/nylon 

seat; shall have Elk-O-Lite pistol grip mounted to bottom of shutoff body (LB-275-GA only); and shall have a 1.5" female threaded swivel inlet and a 

1.5" male threaded outlet. 

Elk-O-Lite ® Ball Shutoff (B-275A and B-275-GA) 


rugged aluminum/bronze horseshoe handle with double stops; shall have hydraulically balanced acetal valve ball with an adjustable neoprene/nylon 

seat; shall have Elk-O-Lite pistol grip mounted to bottom of shutoff body (B-275-GA only); and shall have a 1.5" female threaded swivel inlet and a 

1.5" male threaded outlet. 

Elk-O-Lite ® Ball Shutoff (B-275-AT and B-275-GAT) 


rugged aluminum/bronze horseshoe handle with double stops; shall have metal valve ball with adjustable neoprene/nylon seat; shall have __" integral 

smooth bore tip machined into outlet of shutoff body; shall have pistol grip handle mounted to bottom of shutoff body (B-275-GAT only); shall 

have 1.5" threaded swivel inlet and 1.5" threaded male outlet. 

Select-O-Matic ® Master Stream Nozzle (SM-1000) 

Nozzle shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have heat treated stainless steel spring mechanism, which reacts 

automatically to water flow and delivers that flow efficiently throughout the specified flow range; shall have large control handles to easily change 

pattern; shall be constant flow with infinite pattern selection from straight stream to full fog; shall have highly visible, protective urethane bumper; 

shall have a flow range of 300 to 1000 GPM. Specify 2.5" or 3.5" swivel base. 

Select-O-Matic ® Master Stream Nozzle (SM-1000E) 

Same specifications as SM-1000 except: shall have encased 12 volt DC electric motor with manual override to change stream pattern. 

Select-O-Matic ® Master Stream Nozzle (SM-1000H) 

Same specifications as SM-1000 except: shall have hydraulic piston with built-in flow control to change stream pattern. 

Select-O-Matic ® Master Stream Nozzle (SM-1000B) 

Nozzle shall be constructed of rugged, corrosion resistant brass alloys; shall have heat treated stainless steel spring mechanism, outside unobstructed 

waterway, which reacts automatically to water flow and delivers that flow efficiently throughout the specified flow range; shall have large 

control handles to easily change pattern; shall be constant flow with infinite pattern selection from straight stream to full fog; shall have highly visible, 

protective urethane bumper; shall have a flow range of 300 to 1000 GPM; shall have 2.5" swivel base. 

Select-O-Matic ® Master Stream Nozzle (SM-1000HBP) 

Same specifications as SM-100B except: shall have hydraulic piston with adjustable needle valve to change stream pattern. 

Select-O-Matic ® Master Stream Nozzle (SM-1250) 

Nozzle shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have heat treated stainless steel spring mechanism, which reacts 



shall have a flow range of 300 to 1250 GPM. Specify 2.5" or 3.5" swivel base. 

Specifications



Select-O-Matic ® Master Stream Nozzle (SM-1250E) 

Same specifications as SM-1250 except: shall have encased 12 volt DC electric motor with manual override to change stream pattern. 

Select-O-Matic ® Master Stream Nozzle (SM-1250H) 

Same specifications as SM-1250 except: shall have hydraulic piston with built-in flow control to change stream pattern. 

Select-O-Matic ® Master Stream Nozzle (SM-1250B) 

Nozzle shall be constructed of rugged, corrosion resistant brass alloys; shall have heat treated stainless steel spring mechanism, which reacts 



shall have a flow range of 300 to 1250 GPM; shall have 2.5" swivel base. 

Select-O-Matic ® Master Stream Nozzle (SM-1250HBP) 

Same specifications as SM-1250B except: shall have hydraulic piston with adjustable needle valve to change stream pattern (in place of large control 

ring). 

Select-O-Matic ® 

Nozzle (SM-2000) 

Nozzle shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have heat treated stainless steel spring mechanism which reacts 



shall have a flow range of 500 to 2000 GPM at 50 to 80 psi; shall have 3.5" swivel base. 

Select-O-Flow ® Master Stream Nozzle (CSW and CSW-L) 

Nozzle shall be constructed of durable, hard anodized, lightweight Elk-O-Lite; shall have multiple gallonage settings (CSW, 300-550-750 GPM; 

CSW-L, 500-750-1000-1250 GPM) shall be constant flow; shall have infinite pattern setting from straight stream to wide fog; shall be capable of 

shutting off completely; shall be capable of changing gallonage settings while flowing under normal operating pressure; shall have protective rubber 

bumper; shall have 2.5" swivel base. 

Select-O-Flow ® Master Stream Nozzle (CSW-LB) 

Nozzle shall be constructed of rugged corrosion resistant brass alloys; shall have multiple gallonage settings of 500-750-1000-1250 GPM; shall be 

constant flow; shall have infinite pattern setting from straight stream to wide fog; shall be capable of shutting off completely; shall be capable of 

changing gallonage settings while flowing under normal operating pressure; shall have protective rubber bumper; shall have 2.5" swivel base. 

Hydro-Foam ® Master Stream Nozzle (HF-350) 

Nozzle shall be constructed of rugged, corrosion resistant brass alloys; shall be single gallonage (350 GPM) and constant flow; shall have infinite 

pattern positioning from straight stream to full fog; shall have built-in foam eductor which will proportion at a 1/2%, 1%, 3% or 6% rate; shall be 

U.L. listed; shall be able to accept optional 3/6% valve, shutoff valve, and/or quick-connect coupling; shall have grease fitting for easy lubrication of 

tip cam; shall have 2.5" swivel base; shall have chrome plated (or cast brass) finish. 


Hydro-Foam ® Master Stream Nozzle (HF-500) 

Nozzle shall be constructed of rugged, corrosion resistant brass alloys; shall be single gallonage (500 GPM) and constant flow; shall have infinite 

pattern positioning from straight stream to full fog; shall have built-in foam eductor which will proportion at a 1/2%, 1% or 3% rate; shall be U.L. 

listed; shall be able to accept shutoff valve and/or quick-connect coupling; shall have grease fitting for easy lubrication of tip cam; shall have 2.5" 

swivel base; shall have chrome plated (or cast brass) finish. 

Stinger® Portable Monitor (8297 Series) 

Master Stream appliance shall be constructed of durable, lightweight Elk-O-Lite; shall have two (2) 2.5" clappered inlets (one [1] 3.5", 4.0" or 4.5" 

swivel inlet or one [1] 4.0" or 5.0" storz inlet) shall have full 3.0" waterway; shall have folding legs on portable base; shall be easily detached from 

portable base; shall have handwheel driven worm gear (fully enclosed) for vertical movement; shall have vertical safety stop at 35 degrees above 

horizontal; shall have positive twist-lock mechanism for horizontal travel; shall have convenient carrying handle; shall be capable of flowing up to 

(800 GPM with [2] 2.5" base) (1000 GPM with [1] 3.5", 4.0", 4.5" swivel or 4.0" and 5.0" storz base), shall have 200 psi liquid-filled gauge; shall 

have 10' safety chain; shall have red urethane enamel finish; shall not exceed 17" high; shall not exceed 31 lbs. (less stream shaper and tips). 

Stinger® Deck Gun (8297-98 and 8297-99) 

Master Stream appliance shall be constructed of durable, lightweight Elk-O-Lite; shall have full 3.0" waterway; shall be easily detached from (top mount 

adapter, 8297-98) (top mount fixture, 8297-99); shall have handwheel driven worm gear (fully enclosed) for vertical movement from 80 degrees 

above to 30 degrees below horizontal; shall have full 360 degree horizontal movement with positive twist-lock mechanism; shall be capable of 

flowing up to 1250 GPM; shall have 200 psi liquid-filled gauge; shall have (3"-150# ANSI flange base, 8297-98) (2-2.5" clappered swivel inlet base, 

8297-99); shall not exceed (19.50", 8297-98) (22.50", 8297-99) in height; shall have red urethane enamel finish; shall not exceed 14.50 lbs. (less stream 

shaper, tips, and top mount adapter/fixture).


Scorpion ® Deck Gun (8294-02) 

Deck gun shall be constructed of durable, lightweight Elk-O-Lite; shall have 4.0" vaned waterway; shall be capable of flowing up to 2000 GPM; shall have 

handwheel driven worm gear (fully enclosed) for vertical travel of 90 degrees above to 45 degrees below horizontal with optional stop at 45 degrees 

above horizontal; shall have handwheel driven worm gear (fully enclosed) for 360 degree horizontal travel; shall have grease fittings for easy lubrication 

of gears and ball races; shall have 300 psi liquid-filled gauge; shall have 4.0"-150# ANSI flange base; shall have red urethane enamel finish. 

Scorpion ® Electric Remote Controlled Deck Gun (8294-04) 

Deck gun shall be constructed of durable, lightweight Elk-O-Lite; shall have 4.0" vaned waterway; shall have fully enclosed motor driven worm gear 

for vertical travel of 90 degrees above to 45 degrees below horizontal with optional stop at 45 degrees above horizontal; shall have motor driven 

worm gear for 347 degrees horizontal travel (no horizontal travel on 8294-03) 37 safety stop positions to comply with NFPA 1901; shall have totally 

sealed planetary gear type 12V DC electric motors with manual override; shall include 12V DC control package of one (1) relay box with solid state 

circuitry, one (1) primary control box with function switches and override capability, and one (1) secondary control box with function switches and 

override capability; shall have grease fittings for easy lubrication of gears and ball races; shall have 300 psi liquid-filled gauge; shall include electrically 

controlled (with manual override), automatic, combination fog nozzle capable of flowing from 300 to 1000 GPM (SM-100E); shall have 4.0"- 

150# ANSI flange base; shall have red urethane enamel finish. 

Options for 8294-04 Shall have hand-held remote control box with 50' of cable. 

Shall have 12V DC battery housed in weatherproof case. 

Shall include electrically controlled (with manual override), automatic, combination fog nozzle capable 

of flowing from 500 to 2000 GPM (X-Stream SM-2000E). 


Stingray ® Industrial Monitor (8393) 

Monitor shall be constructed of rugged, corrosion resistant brass alloys; shall have full 3.0" single waterway; shall have handwheel driven worm gear 

(fully enclosed) for vertical travel of 90 degrees above to 60 degrees below horizontal; shall have full 360 degrees horizontal travel with positive twist-lock 

mechanism; shall be capable of flowing up to 1250 GPM; shall have grease fittings for easy lubrication of gear and ball races; shall be furnished with 

3.0"-150# ANSI flange base (3.0" NPT female and 4.0"-150# ANSI flange bases optional); shall be FM approved; shall have red urethane enamel finish. 

Stingray ® Deck Gun (8393P) 

Monitor shall be constructed of rugged, corrosion resistant brass alloys; shall have full 3.0" single waterway; shall have the handwheel driven worm 

gear (fully enclosed) for vertical travel of 90 degrees above to 60 degrees below horizontal; shall have full 360 degree horizontal travel with positive 

twist-lock mechanism; shall be capable of flowing up to 1250 GPM; shall have grease fittings for easy lubrication of gear and ball races; shall have 

200 psi liquid-filled gauge; shall be furnished with 3.0"-150# ANSI flange base (3.0" NPT female and 4.0"-150# ANSI flange bases optional); shall 

have red urethane enamel finish. 

Python ® Industrial Monitor (299-11) 

Monitor of single waterway design shall be constructed of rugged, corrosion resistant brass; shall have waterway of 2.5" I.D. brass tubing; shall 

have cast brass swivel joints with bronze balls and grease zerks for easy lubrication; shall have full 360 degree rotation with brass and stainless 

steel twist-lock mechanism; shall have 150 degree vertical travel (90 degree above to 60 degree below horizontal) controlled with stainless steel 

handle rod and brass and stainless steel twist-lock mechanism; shall be capable of flowing up to 1250 GPM with minimal friction loss; shall be FM 

approved; shall have red urethane enamel finish. 

Python ® Free-Standing Elevated Industrial Monitor (299-11EL) 

A pre-fabricated, free-standing, elevated monitor shall be constructed of rugged, corrosion resistant, extruded brass tubing; shall have full flow 2.5" 

waterway and a 2.5" NHT male outlet; shall have cast brass swivel joints each with double rows of bronze ball bearings; shall have 360° horizontal 

travel; shall have vertical travel of 45° above to 45° below horizontal; shall have 1026 DOM tubular steel vertical waterway; shall have 11 ga. H.R. 

tubular steel horizontal drive sleeve; shall have control lever for vertical and horizontal movement; shall have vinyl coated .375" stainless steel vertical 

control cables; shall have a handwheel twistlock for horizontal positioning and lever lock for vertical positioning; shall have a 4.0"-150# RF 

flange (10', 15', and 20') / 6.0"-150# RF flange (25', 30', and 40') base; shall be (10', 15', 20', 30', or 40') in height as measured from face of 

flange base to centerline of monitor vertical swivel; shall be capable of flowing up to 750 GPM (10', 15', 20', 25', or 30') / 500 GPM (40') without 

external support; shall have red urethane enamel finish. 

Giant Python ® Industrial Monitor (299-20) 

Monitor of single waterway design shall be constructed of rugged, corrosion resistant stainless steel, shall have waterway of 3.5" I.D. stainless steel 

tubing; shall have cast stainless steel swivel joints with stainless steel balls and grease zerks for easy lubrication; shall have full 360 degree rotation 

controlled by handwheel driven worm gear; shall have 150 degree vertical travel controlled by handwheel driven worm gear; shall have worms and 

gears of chrome plated brass; shall have built-in 300 lb. pressure gauge; shall be capable of flowing up to 2500 GPM with minimal friction loss; 

shall be FM approved; shall have red urethane enamel finish. 

Specifications


NSN Index 

Nozzles 

NATIONAL STOCK NO. MODEL DESCRIPTION PAGE 

4210-01-199-6841 SM-10F Automatic nozzle, 60-125 GPM, 1.5" NH, Hdct. AL. .............................................................2 

4210-01-199-6842 SM-10FG Automatic nozzle, with pistol grip, 60-125 GPM, 1.5" NH, Hdct. AL.....................................2 

4210-01-199-6845 TSM-10F Automatic nozzle tip, 60-125 GPM, 1.5" NH, Hdct. AL. ........................................................2 

4210-01-200-3247 STSM-10F Automatic nozzle (Breakapart) 60-125 GPM, 1.5" NH, Hdct. AL...........................................2 

4210-01-199-6835 TSM-30F Automatic nozzle tip, 75-325 GPM, 1.5" NH, Hdct. AL. ........................................................3 

4210-01-200-3248 STSM-30F Automatic nozzle (Breakapart) 75-325 GPM, 1.5" NH, Hdct. AL...........................................3 

4210-01-200-1612 DSM-30F Automatic nozzle, 75-325 GPM, 2.5" NH, Hdct. AL. .............................................................4 

4210-01-201-1377 STDSM-30F Automatic nozzle (Breakapart) 75-325 GPM, 1.5" NH, Hdct. AL...........................................4 

4210-01-199-6844 SM-30PL Automatic nozzle with playpipe, 75-325 GPM, 2.5" NH, Hdct. AL.........................................4 

4210-01-199-6828 SFS Select gallonage nozzle 10-20-30 GPM, 1.0" NH, Chrome..................................................10 

4210-01-199-6827 SFS-G Select gallonage nozzle with pistol grip, 10-20-30 GPM, 1.0" NH, Chrome........................10 

4210-01-199-6829 SFL Select gallonage nozzle, 40-60-95-125 GPM, 1.5" NH, Chrome .........................................10 

4210-01-199-6830 SFL-G Select gallonage nozzle with pistol grip, 40-60-95-125 GPM, 1.5" NH, Chrome ................10 

4210-01-199-6837 TSFL Select gallonage nozzle tip, 40-60-95-125 GPM, 1.5" NH, Chrome ....................................10 

4210-01-199-6833 STSFL Select gallonage nozzle (Breakapart) 40-60-95-125 GPM, 1.5" NH, Chrome......................10 

4210-01-199-6831 SF Select gallonage nozzle, 125-175-250-GPM, 1.5" NH, Chrome ..........................................11 

4210-01-199-6838 TSF Select gallonage nozzle tip, 125-175-250 GPM, 1.5" NH, Chrome......................................11 

4210-01-200-1849 STSF Select gallonage nozzle (Breakapart) 125-175-250 GPM, 1.5" NH, Chrome.......................11 

4210-01-202-2160 STDSF Select gallonage nozzle (Breakapart) 125-175-250 GPM, 2.5" NH, Chrome.......................11 

4210-01-199-6832 SF-800 Select gallonage nozzle with playpipe 125-175-250 GPM, 2.5" NH, Chrome......................11 

4210-01-199-6834 STSF-800 Select gallonage nozzle with playpipe 125-175-250 GPM, 2.5" NH, Chrome......................11 

4210-01-204-1710 STSFB-800A Select gallonage nozzle with playpipe 125-175-250 GPM, 2.5" NH, Chrome......................11 

4210-01-200-5801 DSF Select gallonage nozzle, 125-175-250 GPM, 2.5" NH, Chrome...........................................11 

4210-00-465-1906 SFL-GN-95 Foam nozzle, 95 GPM, 1.5" NPSH, Brass MIL-N-24408....................................................77 

4210-00-601-0986 SFL-GN-125 Foam nozzle, 125 GPM, 1.5" NPSH, Brass MIL-N-24408..................................................77 

4210-00-465-1904 DSF-N Foam nozzle, 250 GPM, 2.5" NH, Brass MIL-N-24408 ......................................................77 

4210-01-165-6599 SB-275 Ball shutoff, 1.0" NH, Chrome.............................................................................................15 

4210-01-165-6600 LB-275 Ball shutoff, 1.5" NH, Chrome.............................................................................................15 

4210-00-240-8793 L-185B Straight bore tip, 1.5" NH, 1.0" Discharge Chrome, MIL-T-12167 .....................................16 

4210-00-200-0346 279 Playpipe, 2.5" NH x 1.5" NH, Chrome..................................................................................17 

4210-01-287-1070 8297-98 Portable monitor, 3.0" - 150# ANSI Flange, Hdct. AL. ........................................................28 

w/282A & SM-100 

Wyes and Water Thief 

4210-01-198-9812 B-100A Gated wye, 2.5" F NH x (2) 1.5" M NH, Hdct. AL. ...............................................................36 

4210-01-198-8350 B-100LA Gated wye, 1.5" F NH x (2) 1.5" M NH, Hdct. AL. ...............................................................36 

4210-01-198-6049 B-100 Gated wye, 2.5" F NH x (2) 1.5" NH, Brass .........................................................................36 

4210-01-198-6048 B-100L Gated wye, 1.5" F NH x (2) 1.5" M NH, Brass .....................................................................36 

4210-01-198-8347 1A Plain wye, 2.5" F NH x (2) 2.5" M NH, Hdct. AL.................................................................36 

4210-01-198-8348 1A Plain wye, 3.0" F NH x (2) 2.5" M NH, Hdct. AL..................................................................36 

4210-01-198-8349 1A Plain wye, 4.0" F NH x (2) 2.5" M NH, Hdct. AL..................................................................36 

4210-01-198-8344 B-97 Gated wye, 2.5" F NH (2) 2.5" M NH, Brass.......................................................................36 




4210-01-196-6267 BG-104 Water thief, 2.5" F NH x (1) 2.5" M NH x (2) 1.5" M NH, Brass ..........................................37 

4210-01-196-4582 BG-104A Water thief, 2.5" F NH x (1) 2.5" M NH x (2) 1.5" M NH, Hdct. AL......................................37 

NSN Index


Siamese 

NATIONAL STOCK NO. MODEL DESCRIPTION PAGE 

4210-01-196-4571 4A Double clappered Siamese, (2) 2.5" F NH x 2.5" M NH, Hdct. AL. ....................................37 

4210-01-196-4572 4A Double clappered Siamese, (2) 2.5" F NH x 3.0" M NH, Hdct. AL. ....................................37 

4210-01-196-4564 B-98 Gated Siamese, (2) 2.5" F NH x 4.0" F NH, Brass ..............................................................37 



4210-01-196-4576 B-98A Gated Siamese, (2) 2.5" F NH x 4.0" F NH, Hdct. AL. ........................................................37 





4210-01-196-4581 B-99A Gated Siamese, (3) 2.5" F NH x 5.0" NH, Hdct. AL. ...........................................................37 

NSN Index 


4210-01-205-3990 890-10-40-E Valve, Ball, Dropout, Brass 1.0" M NPT rigid x 1.0" F NH, swivel......................................47 




4210-01-205-8077 890-01-01-D Valve, Ball, Dropout, Brass 1.0" F NPT rigid both ends .....................................................47 




4210-01-205-6814 892-11-01-E Valve, Ball, Dropout, Brass 2.0" F NPT swivel x 2.0" F NPSH, rigid...................................47 

4210-01-205-6815 892-01-31-E Valve, Ball, Dropout, Brass 2.0" F NPT rigid x 2.0" M NPSH, rigid ....................................47 

4210-01-205-6816 896-01-31-E Valve, Ball, Dropout, Brass 2.5" F NPT rigid x 2.5" M NH, rigid.........................................47 

Foam Eductors 

4210-01-197-9108 241-60 Foam eductor, 60 GPM, .5, 1, 3, 6% 1.5" F NH swivel x 1.5" M NH, Brass .......................40 

4210-01-197-9109 241-95 Foam eductor, 95 GPM, .5, 1, 3, 6% 1.5" F NH swivel x 1.5" M NH, Brass .......................40 

4210-01-197-9110 241-95 Foam Eductor, 95 GPM, .5, 1, 3, 6% 1.5" F NH swivel x 1.5" M NH, Brass.......................40 

4210-01-197-9106 240-95 Foam eductor, By-pass, 95 GPM, .5, 1, 3, 6%, 1.5" F NH swivel x 

1.5" M NH, Brass..............................................................................................................40 

4210-01-112-3081 241-N Foam eductor, 90 GPM, 6%, 1.5" F NPSH swivel x 1.5" M NPSH, Brass ..........................40 

Accessories 

4210-00-289-1537 315 Barrel strainer, 2.5" F NH, Chrome ....................................................................................60 

4210-00-529-5474 315 Barrel strainer, 4.0" F NH, Chrome ....................................................................................60 

4820-00-540-2381 315-FN Foot valve with strainer 3.0" F NH, Brass ..........................................................................60 

5120-00-018-1519 S-454 Hydrant Wrench ................................................................................................................63 

NSN Index


Alphabetical Index 


A 

Adapters: 

Fire Hose......................................................................22, 61 

Hydrant ..............................................................................61 

Pistol Grip ..........................................................................22 

Suction Hose ...............................................................59, 61 

Universal Thread ................................................................61 

Aeration Tubes, Foam ....................................................................43 

Angle Valves...................................................................................78 

Apparatus: 

Accessories ..................................................................56-60 

Deck Guns ....................................................................24-29 

Valves ...........................................................................46-51 

Applicators.....................................................................................17 

Automatic Ball Drip ........................................................................74 

Automatic Nozzles................................................2-5, 13, 18, 19, 73 

B 

Ball Drip .........................................................................................74 

Ball Shutoffs ............................................................................14, 15 

Ball Valves: 

Apparatus .....................................................................46-51 

Hydrant ........................................................................45, 78 

Base, Direct Connection.................................................................22 

Base, Direct Connection with Integral Shutoff .........................14, 15 

Bresnan Cellar Nozzle ....................................................................17 

Built-in Eductor ..............................................................................41 

Butterfly Valve .............................................................45, 49, 51, 74 

C 

Caps; Hose and Suction.................................................................62 

Cellar Nozzles.................................................................................17 

Chief Nozzles ..........................................................................6-9, 13 

Coast Guard Nozzles ......................................................................77 

Constant Flow Fog Nozzles .....................2-13, 18-21, 72, 73, 75, 77 

Control Handles, Remote ...............................................................56 

De-Icing Nozzles ............................................................................75 

D 

Deck Guns: 

Apparatus .....................................................................24-29 

Python................................................................................28 

Scorpion ................................................................24, 25, 29 

Sidewinder ....................................................................26,27 

Stinger....................................................................28, 30-32 

Stingray .......................................................................28, 65 

Remote Controlled........................................................24-27 

Drain Valves...................................................................................60 

Drop-Out Ball Valves, Apparatus ..............................................46-51 

E 

Eductors, Foam........................................................................40, 41 

Elbows, Apparatus Suction and Discharge ..............................58, 59 

Electrical Fog Nozzles ....................................................................76 

Electrically Operated: 

Apparatus Valves .........................................................48, 49 

Monitors .......................................................................25-27 

Elevated Monitors ....................................................................68, 69 

Elk-O-Lite 

Adapters.......................................................................22, 61 

Apparatus Valves ...............................................................47 

Ball Shutoffs ......................................................................14 

Caps...................................................................................62 

Deck Guns ....................................................................24-29 

Gate Valves ........................................................................45 

Hi-Rise Nozzles........................................................9, 12, 13 

Hydrant Valves.............................................................45, 78 

LDH Appliances .....................................................38, 39, 45 

Monitors, Portable........................................................30-33 

Nozzles, Fog ........................................................2-13, 17-21 

Playpipes............................................................................15 

Plugs..................................................................................62 

Siamese .......................................................................37, 39 

Water Thief ..................................................................37, 39 

Wrenches...........................................................................63 

Wyes............................................................................36, 38 

End Cap Charts.......................................................................52 - 54 

Extension (For Stinger) ..................................................................32 

F 

Field Service Kits ...........................................................................79 

Fixed: 

Monitors.......................................................................65-71 

System Fog Nozzles...........................................................75 

Flow Charts ..............................................................................81-89 

Flowmeter......................................................................................22 

Foam: 

Eductors ......................................................................40, 41 

Nozzles ...................................................2-13, 18-21, 72, 73 

Supply Kits ........................................................................42 

Tubes .................................................................................43 

Formulae and Tables ................................................................87-91 

G 

Gate Valves..............................................................................45, 78 

Gated: 

Hydrant Valves.............................................................45, 78 

Manifolds.....................................................................38, 39 

Siamese.......................................................................37, 39 

Wyes............................................................................36, 38 

Gauge, Piezometer.........................................................................22 

Gear Actuated Valves...............................................................50, 51 

Giant Python............................................................................28, 66 

Government Nozzles......................................................................77 

H 

Hi-Rise Nozzles........................................................................12, 13 

Holder: 

Nozzle ................................................................................57 

Spanner .............................................................................63 

Tri-Loc Nozzle....................................................................57 

Wrench ..............................................................................63 

Hose: 

Adapters ......................................................................22, 61 

Caps...................................................................................62 

Clamp ................................................................................22 

Nipples...............................................................................62 

Plugs .................................................................................62 

Spanners ...........................................................................63 

Strap..................................................................................22 

Hydrant: 

Bases.................................................................................74 

Monitors......................................................................65, 67 

Valves ..........................................................................45, 78 

Wrenches...........................................................................63 

Hydraulically Controlled Monitors ...........................................70, 71 

Hydro-Foam Nozzles................................................................21, 73 

Hydro-Loc Apparatus Valves .........................................................46 

I 

Industrial: 

Handline Nozzles ...............................................................76 

Master Stream Nozzles.................................................72-73 

Monitors...................................................................... 65-71 

Valves ................................................................................78 

L 

LDH Appliances .................................................................38, 39, 45 

Low Pressure Nozzles .....................................................5, 9, 12, 13 

M 

Manifolds, LDH........................................................................38, 39 

Marine Nozzles ..............................................................................77 

Master Stream Nozzles ................................................18-21, 72, 73 

Monitor: 

Accessories .................................................................34, 74 

Apparatus.....................................................................24-31 

Chainwheel ........................................................................68 

Elevated .......................................................................68, 69 

Free-Standing ....................................................................69 

Giant Python................................................................28, 66 

Industrial......................................................................65-71 

Mini.............................................................................26, 27 

Nozzles ............................................................18-21, 72, 73 

Portable ...........................................................30-33, 65, 66 

Python...................................................................28, 66, 67 

Remote Controlled...........................................24-27, 70, 71 

Scorpion................................................................24, 25, 29 

Sidewinder ..................................................................26, 27


Spit-Fire.............................................................................66 

Stinger ..................................................................28, 30, 31 

Stingray.......................................................................28, 65 

Stream Shaper Tubes..................................................34, 74 

Tips ...................................................................................16 

Mystery Nozzles................................................................17, 72, 76 

N 

Navy Nozzles .................................................................................77 

Navy Foam Eductor .......................................................................40 

Nipples, Hose ................................................................................62 

No Shock Nozzles..........................................................................76 

Nozzles: 

Break-Apart....................................................................2-13 

Bresnan Cellar ...................................................................17 

Chief ..........................................................................6-9, 13 

Coast Guard ......................................................................77 

Cellar .................................................................................17 

De-Icing.............................................................................75 

Electrical............................................................................76 

Electrically Controlled .....................................18, 19, 26, 73 

Fixed System Constant Flow .............................................75 

Foam ......................................................2-13, 18-21, 72, 73 

Hi-Rise ........................................................................12, 13 

Hydraulically Controlled ..................................18, 19, 72, 73 

Hydro-Foam ................................................................21, 73 

Industrial Handline ............................................................76 

Industrial Master Stream.............................................72, 73 

“Jumbo” Mystery ..............................................................72 

Low Pressure......................................................5, 9, 12, 13 

Marine ...............................................................................77 

Mid-Range........................................2, 3, 5, 7, 9, 11, 12, 13 

Monitor............................................................18-21, 72, 73 

Mystery, Handline..............................................................76 

Navy ..................................................................................77 

No Shock...........................................................................76 

Select-O-Flow Handline...................................10, 11, 75, 77 

Select-O-Flow Master Stream .....................................20, 72 

Select-O-Matic Handline ............................................2-5, 13 

Select-O-Matic Master Stream........................18, 19, 72, 73 

Select-O-Stream Handline .................................................17 

Select-O-Stream Master Stream .................................20, 72 

“Wat-R-Wall”.....................................................................75 

X-Stream...............................................................18, 19, 73 

Nozzle: 

Holder ...............................................................................51 

Repair Kit ..........................................................................73 

Tools..................................................................................74 

P 

Piezometer, Gauge.........................................................................22 

Pipe, The .......................................................................................32 

Pistol Grip Adapter........................................................................22 

Piston Intake Valves ......................................................................45 

Playpipes: 

Brass .................................................................................15 

Elk-O-Lite ..........................................................................15 

Plugs, Hose...................................................................................56 

Portable Flowmeter .......................................................................22 

Portable Monitors........................................................30-33, 65, 66 

Pressure-Matic Valves...................................................................78 

Python Monitors ...............................................................28, 66, 67 

R 

Reducers, Hose.......................................................................25, 55 

Relief Valve....................................................................................60 

Remote Control “T” Handle...........................................................57 

Remote Control Units....................................................................56 

Remote Controlled Monitors........................................24-27, 70, 71 

Remote Controlled Valves........................................................48-51 

Repair Kits, Nozzle and Valve........................................................79 

Rod Guide .....................................................................................57 

Running Board Holder, Nozzles.....................................................57 

S 

Scorpion Monitor .............................................................24, 25, 29 

Seal Kits .......................................................................................79 

Select-O-Flow Handline Nozzles.................................10, 11, 75, 77 

Select-O-Flow Master Stream Nozzles....................................20, 73 

Select-O-Matic Handline Nozzles ..........................................2-5, 13 

Select-O-Matic Master Stream Nozzles ............................18, 19, 73 

Select-O-Stream Handline Nozzles ...............................................17 

Select-O-Stream Master Stream Nozzles................................20, 72 

Shutoff, Ball............................................................................14, 15 

Siamese: 

Ball Valved..................................................................37, 39 

Elk-O-Lite....................................................................37, 39 

Clappered ...................................................................37, 39 

LDH ..................................................................................39 

Plain .................................................................................37 

Suction .............................................................................37 

Sidewinder Monitor ................................................................26, 27 

Smooth Bore Tips.........................................................................16 

Spanner Holder.............................................................................63 

Spanner Wrenches .......................................................................63 

Specifications..........................................................................92-95 

Spit-Fire Monitor ..........................................................................66 

Stinger Portable Monitor.........................................................30-32 

Stingray Monitor ....................................................................28, 65 

Strainers.......................................................................................60 

Support Bearing ...........................................................................74 

Stream Shapers............................................................................74 

T 

Testing Equipment........................................................................22 

Tips: 

Dual Stacked.....................................................................16 

Leader Line.......................................................................16 

Master Deluge ..................................................................16 

Quad Stacked ...................................................................16 

Triple Stacked ...................................................................16 

Tool Kit, Nozzle and Valve.............................................................80 

Tri-Loc Nozzle Holder ...................................................................57 

Truck: 

Accessories.................................................................56-60 

Deck Guns...................................................................24-29 

Fittings ........................................................................56-60 

Valves..........................................................................46-51 

U 

Underwriters: Test Plug Adapter...................................................57 

Universal Thread Adapter .............................................................61 

Valves: 

Angle ................................................................................78 

Apparatus....................................................................46-51 

Ball Drip............................................................................74 

Butterfly .........................................................45, 49, 51, 74 

Drain.................................................................................60 

Drop-Out Ball ..............................................................46-51 

Electrically Operated...................................................48, 49 

Gate............................................................................45, 78 

Gear Operated ............................................................50, 51 

Hydro-Loc.........................................................................46 

Hydrant.......................................................................45, 78 

Piston Intake.....................................................................45 

Pressure-Matic .................................................................78 

Relief ................................................................................60 

Repair Kit..........................................................................79 

W 

Warranty .....................................................................................IBC 

Water Thief.............................................................................37, 39 

Wat-R-Wall Nozzle........................................................................75 

Wildland Monitor....................................................................26, 27 

Wrench Holder .............................................................................63 

Wrenches: 

Hydrant and Spanner........................................................63 

Repair...............................................................................80 

Wyes: 

Ball Valved..................................................................36, 38 

Elk-O-Lite....................................................................36, 38 

Gated..........................................................................36, 38 

LDH ..................................................................................38 

Plain .................................................................................36 

X-Y-Z 

X-Stream Nozzles ...................................................................18, 19 

V 


Alphabetical Index


Numerical Index 

Numerical Index 

CATALOG NO. 

PAGE 

A-Z 

A-1.5" .....................17 

A-2.5" .....................17 

CJ...........................20 

CJ-RC.....................20 

CJ-B.................20, 73 

CJ-B-RC...........20, 73 

CJK ........................73 

CJK-HP ..................73 

CJN ........................20 

CJN-B...............20, 73 

CJN-RC ..................20 

CJN-B-RC.........20, 73 

CSW.......................20 

CSW-L....................20 

CSW-LB ...........20, 73 

D ............................17 

DSF ........................11 

DSF-N ....................77 

DSM-30F..................4 

DSM-30FG ...............4 

DSM-30FGLP ...........5 

DSM-30FLP..............5 

DTSM-30F................4 

HF-350.............21, 73 

HF-500.............21, 73 

IMS-350.................72 

IMS-500.................72 

J.............................72 

JN ..........................72 

L.............................17 

L-OE.......................76 

L-OG ......................17 

LR ..........................17 

LX-100 ...................43 

NSL........................76 

NT-C.......................75 

NT-500-C................75 

NT-1000-C..............75 

NTL-C.....................75 

NTS-C ....................75 

PF-520 ...................22 

PG..........................22 

PG-S ......................22 

R ............................17 

S-O.........................17 

S-OG ......................17 

SF...........................11 

SF-800 ...................11 

SFL-O.....................10 

SFL-B...............10, 77 

SFL-BG.............10, 77 

SFL-DI....................75 

SFL-GDI .................75 

SFL-OG ..................10 

SFL-GCG ................77 

SFL-GN ..................77 

SFL-N...............10, 77 

SFM........................11 

SFM-G....................11 

SFS-DI....................75 

SFS-GDI .................75 

SFS-O.....................10 

SFS-OG ..................10 

SM-3F ......................2 

SM-3FG....................2 

SM-10F ....................2 

SM-10FB..................2 

SM-10FE ..........26, 75 

SM-10FG..................2 

SM-20F ....................2 

SM-20FG..................2 

SM-20FLP................5 

SM-20FGLP..............5 

SM-30F ....................3 

SM-30FG..................3 

SM-30FLP................5 

SM-30FGLP..............5 

SM-30PL..................4 

SM-100F ................18 

SM-1000................18 

SM-1000B..............73 

SM-1000E..............18 

SM-1000H..............18 

SM-1250................18 

CATALOG NO. 

PAGE 

SM-1250B..............73 

SM-1250E..............19 

SM-2000................19 

SM-2000B..............73 

SM-2000E..............19 

SOS........................17 

STDSF....................11 

STDSM-30F..............4 

STDSM-30FG ...........4 

STDSM-30FAT..........4 

STDSM-30FGAT .......4 

STDSM-30FGATLP...5 

STSFL-O.................10 

STSM-10F................2 

STSM-20F................3 

STSM-20FAT ............3 

STSM-20FATLP........5 

STSM-20FG ............ 3 

STSM-20FGAT..........3 

STSM-20FGATLP .....5 

STSM-30BPALP.......5 

STSM-30F................3 

STSM-30FAT ............3 

STSM-30FG..............3 

STSM-30FGAT..........3 

STSM-30FATLP........5 

STSM-30FGATLP .....5 

STSM-30BPA ...........4 

STSM-30PL..............4 

TSF.........................11 

TSFL.......................10 

TSFM......................11 

TSM-10F ..................2 

TSM-20F ..................3 

TSM-20FLP..............5 

TSM-30F ..................3 

TSM-30FLP..............5 

0-99 

00073.....................21 

01501.....................80 

01502.....................80 

1A ..........................36 

RC-1.......................56 

2A ..........................37 

RC-2.......................56 

RC-3.......................56 

4A ..........................37 

RC-4.......................56 

RC-6.......................56 

RC-7.......................56 

RC- 10....................57 

U-20.......................78 

U-25.......................78 

UR-25 ....................78 

40...........................60 

84...........................74 

X-86 .......................78 

X-86A.....................45 

88...........................78 

89...........................78 

B-94 .......................78 

B-95 .......................36 

B-95A.....................36 

B-96A.....................45 

B-97 .......................36 

B-97A.....................36 

B-98 .......................37 

B-98A.....................37 

B-99 .......................37 

B-99A.....................37 

100 

B-100 .....................36 

B-100A...................36 

B-100L ...................36 

B-100LA.................36 

BG-104...................37 

BG-104A ................37 

105.........................58 

110.........................60 

114.........................60 

115.........................60 

116.........................60 

CATALOG NO. 

PAGE 

181.........................16 

181-3 .....................16 

181-3A ...................16 

185-A .....................16 

185-B .....................16 

ST-185A .................16 

ST-185AIFD............16 

186A ......................16 

187A ......................16 

187CAF ..................16 

ST-190-B................16 

ST-190-BA..............16 

ST-194 ...................16 

ST-195 ...................16 

193-6 2.5" ..............17 

193-6 1.5" ..............17 

193-9 2.5" ..............17 

200 

D-200.....................76 

L-200 .....................76 

205-B .....................76 

205-BA...................12 

205-EB ...................76 

D-205-B .................76 

D-205-BA ...............12 

D-205-EB ...............76 

L-205-B..................76 

L-205-BA................12 

L-205-EB................76 

222-1.5" .................75 

222-2.5" .................75 

227A-1.5" ...............22 

227A-2.5" ...............22 

227A-3.5" ...............22 

240-60 ...................40 

240-95 ...................40 

240-125 .................40 

240-P .....................41 

241-N3...................40 

241-N6...................40 

241-30 ...................40 

241-60 ...................40 

241-95 ...................40 

241-125 .................40 

241-150 .................40 

241-250 .................40 

244.........................43 

246.........................43 

246S ......................43 

247.........................43 

247S ......................43 

B-275 .....................15 

B-275A...................14 

B-275AT .................14 

B-275-ATF..............12 

B-275-GA ...............14 

B-275-GAT .............14 

B-275-GATF............12 

B-275-TAF..............12 

DB-275...................15 

DB-275A ................14 

DB-275-AT .............14 

DB-275-GAT...........14 

JB-275 ...................15 

JB-275A .................14 

JB-275-LAFD..........12 

LB-275 ...................15 

LB-275A.................14 

LB-275-AF..............12 

LB-275-GA .............14 

SB-275A.................14 

279-L .....................15 

279-LA ...................15 

B-278 .....................15 

B-278-L..................15 

281A ......................34 

282A ......................34 

282B ......................74 

283A ......................34 

283B ......................74 

284A ......................34 

284B ......................74 

285.........................22 

CATALOG NO. 

PAGE 

285-MB..................22 

292-6 .....................67 

292-6H...................67 

293-6 .....................67 

293-6H...................67 

294-11 ...................67 

294-11CW..............68 

294-11RC...............68 

294-11XBHC ..........70 

295.........................74 

296.........................74 

299-11 ...................66 

299-11H.................67 

299-11P .................28 

299-11FW ..............66 

299-11EL ...............69 

299-11TW..............66 

299-20 ...................66 

299-20XHC ............71 

300 

306.........................62 

307.........................62 

310.........................62 

310A ......................62 

311.........................62 

311A ......................62 

315.........................60 

315-FN ...................60 

318.........................61 

S-319 .....................61 

S-320 .....................57 

A-327 .....................61 

A-327A...................61 

D-327.....................22 

D-327A...................22 

F-327......................61 

F-327A ...................61 

M-327 ....................61 

M-327A..................61 

M-327ABI...............61 

S-327 .....................61 

348-1.5" .................58 

348-2.5" .................58 

348-4 .....................58 

348-5 .....................59 

348-6 .....................59 

348A ......................59 

348-L .....................58 

348-M ....................58 

348-ML ..................58 

400 

418.........................59 

418-L .....................59 

418-S .....................59 

418SA ....................59 

419.........................59 

435.........................61 

454.........................63 

S-454 .....................63 

F-464A ...................63 

F-464B ...................63 

T-464......................63 

469.........................63 

470.........................63 

471.........................63 

600 

603.........................80 

632.........................22 

653.........................57 

L-653 .....................57 

700 

702.........................74 

775-5 .....................57 

775-11 ...................57 

775-15 ...................57 

800 

800-SOS ................17 

B-877A...................15 

890.........................47 

CATALOG NO. 

PAGE 

891.........................47 

892.........................47 

893.........................47 

W-893 ....................47 

896.........................47 

1500 

1575.......................76 

1575E.....................76 

2000 

2850.......................45 

2860.......................45 

2891.......................46 

2892.......................46 

2893.......................46 

2896.......................46 

2915E.....................48 

2920E.....................48 

2925A ....................47 

2925E.....................48 

2925G ....................50 

2930E.....................48 

2930G ....................50 

2940E.....................49 

2940G ....................50 

2940GA..................45 

2954E.....................49 

2954G ....................51 

2955E.....................49 

2955G ....................51 

2956E.....................49 

2956G ....................51 

3000 

3060.......................62 

4000 

4000-01 ...................6 

4000-02 ...................6 

4000-03 ...................6 

4000-10 ...................6 

4000-11 ...................6 

4000-12 ...................6 

4000-13 ...................6 

4000-14 ...................6 

4000-15 ...................6 

4000-16 ...................7 

4000-17 ...................7 

4000-18 ...................6 

4000-19 ...................6 

4000-20 ...................7 

4000-21 ...................7 

4000-22 ...................7 

4000-23 ...................7 

4000-24 ...................7 

4000-25 ...................7 

4000-26 ...................8 

4000-27 ...................8 

4000-28 ...................8 

4000-29 ...................8 

4000-31 ...................7 

4000-34 ...................8 

4000-35 ...................7 

5000 

5000-04 .................26 

5000-14 .................26 

5000-24 .................26 

8000 

8287.......................33 

8294-02 .................24 

8294-04 .................25 

8297-10 .................30 

8297-25 .................30 

8297-35 .................31 

8297-40 .................31 

8297-41 .................31 

8297-45 .................31 

8297-51 .................31 

8297-98 .................32 

8297-99 .................32 

8297-MB................32 

CATALOG NO. 

PAGE 

8298.......................32 

8298EX ..................32 

8298EX-MB............32 

8299.......................32 

8393.......................65 

8383FW..................65 

8393H ....................65 

8393IV ...................65 

8393P ....................28 

8393TW .................65 

8394-02 .................66 

8394-04 .................66 

8397.......................33 

8494-01 .................26 

9000 

9702.......................39 

9703.......................39 

9712.......................38 

9713.......................38 

9715.......................38 

9722.......................39 

9723.......................39 

9743.......................39 

9786.......................45 

9787.......................45 

9812.......................38 

9813.......................38 

9815.......................38 

9822.......................39 

9823.......................39 

9843.......................39 

20000 

20984.....................21 

21000 

21597.....................21 

70000 

70045.....................21 

71000 

71251.....................80 

71252.....................80 

71258.....................80 

71303.....................80 

80000 

80269.....................80 

80291.....................80 

80313.....................80 

80326.....................79 

80421.....................79 

80426.....................79 

80427.....................79 

80428.....................79 

80632.....................79 

80633.....................79 

80642.....................80 

80671.....................79 

80800.....................79 

80850.....................25 

80902.....................79 

80947.....................79 

81000 

81076.....................25 

81105.....................79 

81106.....................79 

81107.....................79 

81108.....................79 

81109.....................79 

81122.....................27 

81140.....................79 

81172.....................27 

81176.....................25 

81181.....................27 

81204.....................22 

81221.....................25 

81231.....................42 

81232.....................42 

81242.....................25 

81258.....................32

Limited Warranty 

Elkhart Brass Manufacturing Company, Inc., 1302 West Beardsley Avenue, Elkhart, Indiana 46514 

(“Warrantor”), warrants to the original purchaser of the new fire protection equipment manufactured by 

Warrantor and to any person to whom such equipment is transferred, that such equipment shall be free 

from defects in materials and workmanship during the five (5) year period (electrical components two 

[2] years) commencing upon the receipt of such equipment by the original purchaser thereof 

(“warranty period”). 

Warrantor’s obligation under this warranty is specifically limited to replacing or repairing its fire protection 

equipment or parts thereof which are shown by Warrantor’s examination to be in a defective condition 

attributable hereunder to Warrantor. To qualify for this warranty, alleged defective equipment MUST be 

returned to Warrantor at its above address, transportation charges prepaid, within a reasonable time after 

discovery of an alleged defect, and in no event later than thirty (30) days beyond the expiration of the warranty 

period. If, as a result of Warrantor’s examination of the returned equipment, Warrantor concludes 

that a product defect attributable hereunder to Warrantor exists, Warrantor shall cure such defect within 

a reasonable time, not to exceed forty-five (45) days after such examination. All expenses in curing such 

defect except for transportation charges and shipping expenses incurred in delivering such equipment 

to Warrantor shall be paid by Warrantor. 

In the event that a defect in such equipment is found to be attributable hereunder to Warrantor and 

Warrantor is unable to provide replacement and repair is not commercially practicable or cannot be timely 

made, Warrantor may elect to refund to claimant the purchase price of such equipment actually received 

by warrantor, less reasonable depreciation, in complete discharge of its obligations hereunder. If Warrantor 

elects to comply with this warranty by means of such refund, as a condition precedent to such compliance, 

the claimant shall return such equipment to Warrantor free and clear of liens and other encumbrances. 

THE ORIGINAL PURCHASER OF SUCH EQUIPMENT, ANY PERSON TO WHOM SUCH EQUIPMENT IS 

TRANSFERRED, AND ANY PERSON WHO IS AN INTENDED OR UNINTENDED BENEFICIARY OF SUCH 

EQUIPMENT, SHALL NOT BE ENTITLED TO RECOVER FROM WARRANTOR ANY CONSEQUENTIAL 

OR INCIDENTAL DAMAGES FOR INJURY TO PERSON AND/OR PROPERTY RESULTING FROM ANY 

DEFECTIVE EQUIPMENT MANUFACTURED BY WARRANTOR. 

Misuse or neglect (including failure to provide reasonable maintenance) of, or accident or unauthorized 

repairs or alterations to, such equipment, shall release and discharge Warrantor from any obligation 

under this warranty or otherwise. 

WARRANTOR EXPRESSLY LIMITS WITH RESPECT TO SUCH EQUIPMENT ALL IMPLIED WAR- 

RANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR 

PURPOSE TO THE WARRANTY PERIOD. AFTER EXPIRATION OF THE WARRANTY PERIOD, WAR- 

RANTOR EXPRESSLY DISCLAIMS WITH RESPECT TO SUCH EQUIPMENT ALL IMPLIED WAR- 

RANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR 

PURPOSE. THERE IS NO WARRANTY OF ANY NATURE MADE BY WARRANTOR BEYOND THAT 

WHICH IS CONTAINED HEREIN. 

Should Warrantor fail to meet its obligations under this warranty, a claimant may sue Warrantor to secure 

its compliance with this warranty. No action to enforce this warranty or to otherwise secure recovery from 

Warrantor for any damages arising out of the fire protection equipment manufactured by Warrantor shall 

be commenced later than six (6) years (electrical components three [3] years) from and after the date of 

the receipt of such equipment by the original purchaser thereof. 

NO PERSON HAS AUTHORITY TO ENLARGE, AMEND, OR MODIFY THIS WARRANTY. 

Warrantor reserves the right to change the parts or design of its products from time to time without 

notice,and with no obligation to maintain spare parts or to make corresponding changes in the products 

previously manufactured. 

Elkhart Brass is proud to be ISO 9001 registered with internationally 

recognized TRA Certification. Our registration refers to certificate #20006 

which is on file in our office. This certification is just one way of showing 

our commitment to excellence.

902-2002 

Corporate Offices: 

Elkhart Brass Mfg. Co., Inc. 

P.O.Box 1127 

Elkhart, IN 46515 

1302 W. Beardsley Ave. 

Elkhart, IN 46514 

Tel. (574) 295 - 8330 

(800) 346 - 0250 

Fax (574) 293 - 9914 

e-mail : info@elkhartbrass.com 

Export Office: 

Elkhart Brass International 

P.O. Box 6262 

South Bend, IN 46660 USA 

207 Dixie Way North #340 

South Bend, IN 46637 USA 

Tel. (574) 277 - 8717 

Fax (574) 272 - 5117 

e-mail : elkbrass-aci@worldnet.att.net 

www.elkhartbrass.com

Catalog - Da Miano & Graham

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?