Catalog - Da Miano & Graham

More documents

Recommendations

Info

“A Century of Dependability” Portable Foam Eductors Portable Foam Eductors See Eductor Performance Chart on Page 81 Features: • Rugged, Corrosion Resistant Brass Construction • 1/2% Setting for Class A Foam* • Simple, Efficient Venturi Design • Inline or By-pass Models* • 1, 3, & 6% Settings for Class B foam* • Positive Setting Positions* • Removable Metering Valve • Clear PVC Pickup Hose – .625" ID x 1.0" OD • Removable Pickup Screen • Wide Selection of Flows* • Stainless Steel Check Ball* By-Pass Eductors 240-60 By-Pass Foam Eductor 60 GPM flow • By-pass allows for water only operations at lower inlet pressures • Positive setting metering valve (0, 1/2, 1, 3, & 6%) • 1.5" or 2.5" NHT free swivel inlet (please specify) • 1.5" NHT male outlet • Finish red urethane enamel with chrome plated trim • Length, 17.25" • Weight, 20.5 lbs. 240-95 By-Pass Foam Eductor Same as 240-60 except 95 GPM flow. 240-125 By-Pass Foam Eductor Same as 240-60 except 125 GPM flow. Inline Eductors 241-30 Inline Foam Eductor (Not Shown) 30 GPM flow • Infinite setting metering valve (0 thru 6%) • 1.0" or 1.5" NHT free swivel inlet (please specify) • 1" NHT male outlet • Finish red urethane enamel with chrome plated trim • Length, 8.375" • Weight, 4.5 lbs. 241-60 Inline Foam Eductor 60 GPM flow • Positive setting metering valve (0, 1/2, 1, 3, & 6%) • 1.5" or 2.5" NHT free swivel inlet (please specify) • 1.5" NHT male outlet • Finish red urethane enamel with satin brass or chrome plated trim (please specify) • Length, 11.75" • Weight, 9.5 lbs. 241-95 Inline Foam Eductor Same as 241-60 except 95 GPM flow. 241-125 Inline Foam Eductor Same as 241-60 except 125 GPM flow. 241-150 Inline Foam Eductor Same as 241-60 except 150 GPM flow. 241-250 Inline Foam Eductor Similar to 241-60 except 250 GPM, a 2.5" NHT free swivel inlet, and a 2.5" NHT male outlet • Length, 16" • Weight, 16.75 lbs. 241-N3 Inline Foam Eductor 90 GPM flow • Single percentage metering valve (3%) • 1.5" NPSH swivel inlet and 1.5" NPSH male outlet • Cast brass finish • Length, 10" • Weight, 5.75 lbs. 241-N6 Inline Foam Eductor Same as 241-N3 except 6% metering. Benefits: • Years of Dependable Service • Easy Hook-up/Easy Set-up • Trouble-free Operation • Compatible with Most Foam Concentrates • A Size for All Handlines: 1" thru 3" • Cost Effective Class A Foam System • Can be deployed in any position • Elkhart Quality Infinite Setting Valve Operating Pressure for Eductors These eductors are designed to achieve rated flow with an inlet pressure of 200 psi. They will operate at lower inlet pressures than this, but the flow rate and percentage rate will be effected (see chart on page 81). For more technical information on these eductors, call for our operating and maintenance instructions (Form No. EB-98069). Check List if Eductor Fails to Pick Up Foam These eductors are very basic in design and very easy to operate. However, there are many other conditions and situations that can cause the eductor to fail in picking up foam concentrate. If this happens check the following: ✔ Mismatched nozzle ✔ Partially closed nozzle ✔ Clogged nozzle Metering Valves Positive Setting Valve ✔ Ball check stuck ✔ Metering valve clogged ✔ Plugged pick up screen ✔ Hose lay too long ✔ Metering valve set ✔ Metering valve closed improperly ✔ Nozzle elevated too high ✔ Kink in hose ✔ By-pass valve open *These features not applicable to 241-N3 and 241-N6.
“A Century of Trust” 240-60P Built-In Foam Eductor Same operational features as portable 240-60 (see pg. 40) except furnished with valves, fittings and accessories for installing permanently behind the panel in pump compartment • 60 GPM flow @ 200psi inlet pressure. • Package includes: One 240 by-pass eductor One 890-01-01-D 1.0" inline valve Two 775-15 tee handles Two 775-11 rod guides One “thru the panel” metering valve with 5 settings (0, 1/2, 1, 3, & 6) One ball check valve One brushed stainless steel instruction plate (with hardware) 2.0" NPT female inlet and outlet • 1.5" NPT female optional • Eductor and valves cast brass finish • Tee handles and rod guides chrome plated • Eductor length, 17.25" • Package weight, 32.875 lbs. 240-95P Built-In Foam Eductor Same as 240-60P except 95 GPM flow @ 200psi inlet pressure. 240-125P Built-In Foam Eductor Same as 240-60P except 125 GPM flow @ 200psi inlet pressure. Built-In Foam Eductors Typical 240-P Installation FROM PUMP 240-P EDUCTOR Additional Specifications page 94 TO DISCHARGE MINIMUM OF FIVE PIPE DIAMETERS STRAIGHT PIPE ON EDUCTOR DISCHARGE Check List if System Fails to Pick Up Foam ✔ Foam handle not pulled out ✔ Eductor handle not pulled out ✔ Metering valve set improperly ✔ Mismatched nozzle ✔ Foam tank empty ✔ Ball check stuck ✔ Partially closed nozzle ✔ Hose lay too long ✔ Clogged nozzle ✔ Foam tank not vented ✔ Kink in hose ✔ Metering valve clogged with dry foam ✔ Elbow plumbed too close to inlet or outlet ✔ Excessive friction loss between eductor and discharge outlet ✔ Too much nozzle elevation .625 MIN. I.D. PIPE OR HOSE ADJUSTABLE METERING DEVICE See Eductor Performance Chart on Page 81 BALL CHECK VALVE PULL-OUT FOR FOAM BY-PASS VALVE 1,000 MIN. I.D. PIPE OR HOSE FLUSH LINE 890-01-01-D 1" VALVE 775-11 ROD GUIDE 775-15 TEE HANDLE FOAM VALVE Threads Flow @ 200 psi Model Inlet* Outlet* GPM L/Min 240-60P 240-95P 240-125P 2.0" NPT Fe 2.0" NPT Fe 2.0" NPT Fe 2.0" NPT Fe 2.0" NPT Fe 2.0" NPT Fe 60 95 125 225 360 475 *1.5"NPT Female optional 2" MINIMUM I.D. PIPE OR HOSE FOR 125 GPM EDUCTORS TO FOAM TANK PULL-OUT FOR FOAM Built-In Foam Eductors
Page 1 and 2: Catalog C Elkhart Brass Fire Fighti
Page 3 and 4: Table of Contents CATALOG “C” N
Page 5 and 6: Select-O-Matic ® … The Industry
Page 7 and 8: Select-O-Matic ® … The Industry
Page 9 and 10: “A Century of Fire Fighting Progr
Page 11 and 12: “A Century of Trust” Low Pressu
Page 13 and 14: “A Century of Dependability” Se
Page 15 and 16: “A Century of Trust” Low Pressu
Page 17 and 18: “A Century of Trust” Brass Ball
Page 19 and 20: “A Century of Trust” Cellar/Dis
Page 21 and 22: Select-O-Matic ® …The Industry L
Page 23 and 24: “A Century of Trust” The Hydro-
Page 25 and 26: For a century, we have strived to b
Page 27 and 28: “A Century of Trust” Standard C
Page 29 and 30: “A Century of Trust” Sidewinder
Page 31 and 32: “A Century of Trust” 8297-99 St
Page 33 and 34: “A Century of Trust” Stinger®
Page 35 and 36: “A Century of Trust” 8397 Elk-O
Page 37 and 38: For a century, Elkhart Brass has be
Page 39 and 40: “A Century of Trust” Ball Valve
Page 41: “A Century of Trust” Clappered
Page 45 and 46: “A Century of Trust” Foam Aerat
Page 47 and 48: “A Century of Trust” Suction In
Page 49 and 50: “A Century of Trust” 800 Series
Page 51 and 52: “A Century of Trust” Electrical
Page 53 and 54: “A Century of Trust” Gear Actua
Page 55 and 56: “A Century of Trust” End Cap Op
Page 57 and 58: “A Century of Trust” Dimensions
Page 59 and 60: “A Century of Trust” Apparatus
Page 61 and 62: “A Century of Trust” Apparatus
Page 63 and 64: “A Century of Trust” 318 Brass
Page 65 and 66: “A Century of Trust” F-464A Elk
Page 67 and 68: “A Century of Trust” Features:
Page 69 and 70: Traditional Monitors 292-6 Handle O
Page 71 and 72: “A Century of Trust” Free-Stand
Page 73 and 74: “A Century of Trust” 299-20XHC
Page 75 and 76: “A Century of Trust” Select-O-F
Page 77 and 78: “A Century of Trust” Wat-R-Wall
Page 79 and 80: “A Century of Trust” Marine Han
Page 81 and 82: “A Century of Trust” Valve Kits
Page 83 and 84: “A Century of Trust” Eductor/No
Page 85 and 86: “A Century of Trust” Catalog No
Page 91 and 92: “A Century of Trust” Friction L
Page 93 and 94:
“A Century of Trust” Hydrant Di
Page 95 and 96:
“A Century of Trust” Elk-O-Lite
Page 97 and 98:
“A Century of Trust” Scorpion
Page 99 and 100:
“A Century of Trust” Siamese NA
Page 101 and 102:
“A Century of Trust” Spit-Fire.
Page 103 and 104:
Limited Warranty Elkhart Brass Manu
show all

Catalog - Da Miano & Graham

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?