Installation Instructions - Hotchkis Sport Suspension

More documents

Recommendations

Info

1967-1969 GM F Body 10F. Install the bushing on the new Hotchkis bar. Make sure the split on the bushing faces the front when the bar is installed in the vehicle. Look at the placement of the original stock bushings on the stock bar for guidance. 11F. Place the greasable bracket over top the bushing and secure them with the stock bolts. You may fully tighten these bolts at this time. Hotchkis Performance LLC. 8
1967-1969 GM F Body 12F. It is best to tighten the endlinks with the suspension at ride height. To achieve this, simply reinstall the wheels and drive the car onto some floor ramps. These can be found at your local auto store. Now, with the car at ride height and on the floor ramps you can crawl underneath the car and fully tighten the endlinks. Tighten the endlinks until the bushings are squeezed just enough that their diameter is just larger than the supporting washer. You are now finished installing your new Hotchkis Anti-Roll bar. Hotchkis Performance LLC. 9
Page 1 and 2: 1967-1969 GM F Body 2207C Anti-Roll
Page 3 and 4: 1967-1969 GM F Body 5F. Completely
Page 5 and 6: Installing New Hotchkis Anti-Roll B
Page 7: 1967-1969 GM F Body 8F. Once the ba
Page 11 and 12: 1967-1969 GM F Body 4R. Install the
Page 13 and 14: 1967-1969 GM F Body 8R. Remove the
Page 15 and 16: 1967-1969 GM F Body NOTE: We have n
Page 17 and 18: 1967-1969 GM F Body 13R. Using the
Page 19 and 20: 1967-1969 GM F Body 16R. Using the
Page 21 and 22: Hotchkis Performance LLC Return Pol
Page 23 and 24: 1967-1969 GM F Body Effective Decem
Page 25 and 26: Discard Sleeve 12. Put you stock fr
Page 27 and 28: of any salesperson do not constitut

Installation Instructions - Hotchkis Sport Suspension

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?