EasyCal UniCal MicroCal

EasyCal
UniCal
MicroCal
eurotron
The most complete line of
process and laboratory calibrators
Bulletin 08-01.3 E
TEST &
MEASUREMENTS
UniCal
UniCal MMX2
Voltage
Current
Frequency
Thermocouple
Resistance
Thermometer
Pressure
Temperature
MicroCal Pzero
MicroCal 2+
MicroCal PM200 System
CalpMan 2000
Software to document
your calibration and to
test activities in
compliance with ISO9000
MicroCal P/P2
See other
Products inside
Eurotron - One of the world leaders in high technology equipments: portable flue gas analysers - high accuracy calibrators - non-contact IR thermometers.

TEST &
MEASUREMENTS
PALM-TOP
FOR MORE CONVENIENCE
COMPACT
SIMULATORS
SINGLE
FUNCTION
EasyCal UniCal MicroCal
PALM-TOP
MULTIFUNCTION
EasyCal is a complete family of
rugged, compact, accurate, simulators
for the most common process signals.
No other instrument is easier to be
used ! !
This series includes five different
models:
EasyCal mA: 0/22mA current loop
simulator (built in 24Vdc power
supply).
EasyCal Tc: Thermocouple
simulators.
Available for Tc type K, J or T.
EasyCal Rtd: Resistance
thermometer simulators Pt100
( =0.00385). Models with -200 to
800°C and -10 to 250°C ranges.
EasyCal pH: Glass electrode
simulator from 0 to 14pH with high
impendence 1000M
test.
EasyCal PS: 24Vcc current loop
power supply.
A rugged 23
positions rotative
switch select the
simulation value. All
instruments are
supplied complete
with a calibration
certificate.
UniCal V, mA, Tc, and Rtd are
instruments designed to meet the
needs of instrumentation and Quality
engineers and managers both in
laboratory and in field work. The
ranges are the most common used to
check and calibrate process
instruments.
The UniCal is accurate, rugged and
easy to use. These instruments have
five operational mode: Generator,
Simulator, Indicator, Indicator on
powered circuits, 24 Vdc Current loop
power supply.
UniCal MMX2 is a palm-top
multimeter-calibrator with 15 functions
in one rugged and compact 2 channels
unit.
Simultaneous simulation and measure
indication. It include a standard
AC+DC multimeter and a calibrator for
Voltage, Current and frequency.
A complete system for testing,
measuring and calibrating on a single,
compact, portable unit. You can select
between 14 type of thermocouple,
Pt100, Ni100 and Ni120, mV, V, mA,
Ohm.
MicroCal 1+ MAV, 1 or 2 simultaneous
channels calibrator for process
signals (mA and V).
MicroCal 1+ , multifunction calibrator
for thermocouples, resistance
thermometers, mV and mA. Its
basic accuracy is 0.03% of reading.
MicroCal 1 I.S. , Similar characteristics
of MicroCal 1+ but with intrinsic
safety EEx ia IIC T6 approval.
MicroCal 2+, high accuracy calibrator
(0.02% of rdg). Two insulated
channels for simultaneous
simulation and measure on TRX
calibration.
MicroCal 10+, high accuracy calibrator
with a basic accuracy of 0.01% of
rdg (mV range).
Signal Calibrators
(See dedicated bulletins for more characteristics)
Best 2° channel
Model Simulation Measure Accuracy mA & V Note
mA mV V Tc Rtd Ohm Hz mA mV V Tc Rtd Ohm Hz bar % rdg
EasyCal mA
EasyCal Tc
EasyCal Rtd
UniCal mA
UniCal V
UniCal Tc
UniCal Rtd
UniCal MMX2
MicroCal 1+ MAV
MicroCal 1+
MicroCal 1+ Rtd
MicroCal 2+
MicroCal 10
MicroCal 200
MicroCal 200+
MicroCal 2000+
Opt.
Opt.
Opt.
±0.1% No With 23 position
±0.1% No manual selector
±0.04% No
±0.05% No Ramp, Cycle &
±0.1% No Sequence
±0.04% No
±0.04% No
±0.03% No AC Measurements
±0.02% Opt
±0.03% No Available I.S. ver.
±0.03%
±0.02%
No
Std
Available I.S. ver.
2 rows display
±0.02% No
±0.02% Std Calibration procedures
±0.01% Std Calibration procedures
±0.005% Std High Accuracy

TEST &
MEASUREMENTS
UNIVERSAL
AND PRESSURE
MULTIFUNCTION
HIGH ACCURACY
MicroCal 200/200+ & 2000+
MULTIFUNCTION
PRESSURE
MicroCal PM200
PALM-TOP
PRESSURE
MicroCalPzero/P&P2
MicroCal multifunction calibrators are
the instruments to keep your test and
process equipment adequately
calibrated for ISO9000 compliance.
They are portable very high accuracy,
with 2 independent and insulated
simultaneous channels. Compact,
rugged, easy to use and expandible,
they allow you to simulate and
measure: mV, V, mA (active and
passive loop), ohm, thermocouples,
resistance thermometers, frequency
and pulse.
All 3 models can be connected to the
pressure module MicroCal PM200 to
add them the pressure generation
and measure capability. Using the
CalpMan Plus PC software and the
MicroCal T temperature calibrators, it
is possible to have a true calibration
and certification system for
thermocouple and resistance
thermometers. The 3 models are
different for their accuracy and for the
available accessories.
MicroCal PM200 is a true universal
signal & pressure calibrator with builtin
pump. This pressure module
designed to expand the MicroCal
200/200+ and MicroCal 2000+
calibrators. Connecting this module to
the signal calibrator you are able to
measure and generate gauge,
differential, vacuum, and absolute
pressure simultaneously with signal
measurements.
The MicroCal PM200 portable
calibration System is the most
advanced, powerful and user friendly
indicator-simulator available.
To simplify your calibration activity and
for more accuracy, the module can be
furnished with 2 internal pressure
sensors (2 and 20 bar f.s.), Internal
hand pump, ventilation valve and fine
adjustment. One external sensor can
be connected for high pressure
measurements.
MicroCal PM200 System is the ideal
calibrator to inspect, calibrate all
process instruments and in particular
the pressure and signal transmitters.
An important feature is the internal
power supply (24 Vdc) able to connect it
directly to a passive current loop.
MicroCal P Zero : It uses an integrated
sensor made in stainless steel and
can be used to measure all AISI316
compatible fluids. The MicroCal
Pzero includes an auxiliary Voltage
and current input for in field
transmitters calibration. Internal
procedure for pressostat cheks and
leak test are standard features.
MicroCal P is a rugged instrument and
can measure static and differential
pressure of air and inert gases
within the range from vacuum to 20
bar. Flexibility is assured by
interchangeable pressure modules
from 20 mbar up to 20 bar f.s.. This
allow you the best accuracy and
resolution in each range in a single
instrument. Internal procedure for
pressostat cheks and leak test are
included.
MicroCal P2 has the same
specifications as MicroCal P but
with additional signal input for
transmitter signals (0 - 20V and 0 -
22mA) reading.
A wide range of manual pump are
available to generate vacuum and
pressure up to 700 bar.
Signal Calibrators
Best 2° channel
Model Simulation Measuring Accuracy mA & V Note
mA mV V Tc Rtd Pressure mA mV V Tc Rtd Pressure
MicroCal P100
MicroCal Pzero
MicroCal P
MicroCal PM200
(1)
(1)
(1)
(1) With EasyCal mA current simulator
(2) With UniCal mA current Calibrator
Opt. Ext.
Opt. Ext.
Opt. Ext.
Opt. Int.
(2)
±0.05% f.s. No Sensor AISI316
±0.05% f.s. Std Sensor AISI316
±0.05%rdg Opt Pressure Modules
±0.025%rdg Std

TEST &
MEASUREMENTS
TEMPERATURE
AND SOFTWARE
MicroCal P100/100IS
DRY BLOCK
TEMPERATURE
MicroCal T100 / T500 & T1100
SOFTWARE
TO CALIBRATE
CalpMan 2000
MicroCal P100 has been designed
for industrial world requirements, in
which characteristics such as
compactness, ruggedness and
reliability, are very important, as well
as accuracy, linearity, and stability.
MicroCal P100 is composed by a
very compact digital indicator using a
stainless steel 17-4 sensor and one
integrated pump for generating
pressure. The available ranges are:
0-2 bar, 0-50 bar, 0-100 bar, 0-250
bar and 0-350 bar. Ranges up to
1000bar are available on request.
MicroCal P100IS has similar
specification as MicroCal P100, and it
is certified for Intrinsic Safety EEx ia
IIC T5 applications.
Temperature represents the most
important parameter to be monitored
when we have to satisfy requirements,
such as Quality, operating safety, and
industrial process reliability. When
being installed in a process,
thermocouples, resistance
thermometers, and every other kind of
temperature sensors, are subjected to
mechanical, chemical and thermic
stresses, which accelerate their
ageing. So, it is better to verify and
certify every sensor at regular time
intervals.
A wide range of standard and special
metallic inserts is available to satisfy
all calibration requirements.
Companies Quality managers and
supervisors ask for drawing up, filing,
and analyzing results, and a trace of
verifying activity and periodic
calibrations as regards process and
laboratory instrumentation.
In this view, Eurotron has realized
TM
Calpman 2000 a Windows 95
software package. Calpman 2000 is
compatible with all Eurotron signal,
temperature and pressure Calibrators
(UniCal and MicroCal series), and
unifies in one software the laboratory
calibrations management.
Software main characteristics are:
Standard and laboratory
instrumentation management
Calibrations instruments tickler
Printing a detailed and
personalized calibration report as
ISO9000 rules requirement
Filing test data on hard disk in
order to have them available in any
moment
Possibility of calibrating in an
automatic way (RS232), using all
Eurotron calibrators, in semiautomatic
way if the instrument to
be calibrated is a transmitter or
multimeter, etc.
Very simple to use, to program and
to connect
This software simplifies, speeds and
minimize mistakes in preparing
verifying documents, so it is a good
instrument for calibration laboratory.
It is a Windows 95/98/NT and Y2K
compatible program
Signal Calibrators
Model Range Stability Uniformity Buit-in 0.01°C
indication
Radial
Axial
MicroCal T100 -30 to 125°C (opt 150°C) ±0.03°C ±0.1°C @ 100°C ±0.2°C @ 80mm YES
MicroCal T500 Tamb to 550°C (opt 600°C) ±0.05°C @ 450°C ±0.2°C @ 450°C ±0.8°C @ 80mm YES
MicroCal T1100 200 to 1100°C ±0.3°C @ 1000°C ±0.2°C @ 800°C ±0.3°C @ 100mm NO
Specifications may change without notice.
eurotron
www.eurotron.com
EUROTRON Italiana S.r.l.
V.le F.lli Casiraghi 409/413
I 20099 Sesto S. Giovanni (MI)
Tel.: +39-02 248820.1
Fax: +39-02 2440286
Distributed by: