4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids
4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids
4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
RE 23164/07.06 WE 6 .…H Hydraulics Bosch Rexroth AG 7/8<br />
Unit dimensions: Version ”K4” (nominal dimensions in mm)<br />
5 7<br />
2<br />
4<br />
2<br />
7<br />
82,5 15<br />
7<br />
23<br />
1.1 Solenoid "a"<br />
1.2 Solenoid "b"<br />
1.1 8 10 9<br />
8 1.2<br />
13,6<br />
Ø9,4<br />
Ø5,6<br />
42<br />
85,5 (127,5)<br />
149,5<br />
A<br />
69,2<br />
P<br />
213<br />
2 Plug-in connector <strong>with</strong>out circuitry (separate order, see<br />
page 3)<br />
3 Plug-in connector <strong>with</strong> circuitry (separate order, see<br />
page 3)<br />
4 Nameplate<br />
5 Space required to remove plug-in connector<br />
6 Space required to remove coil<br />
7 Fixing nut, M T = 4 + Nm<br />
8 Plug screw for <strong>valve</strong> <strong>with</strong> one solenoid<br />
9 Identical seal rings for ports A, B, P <strong>and</strong> T<br />
10 Position of ports to DIN 24340 form A<br />
T<br />
B<br />
8,4<br />
0,01/100mm<br />
Rzmax 4<br />
Subplates to data sheet RE 45052<br />
(separate order)<br />
G 34 /0 (G /4)<br />
G 342/0 (G3/8)<br />
G 502/0 (G /2)<br />
Valve fixing screws (separate order)<br />
– 4 socket head cap screws<br />
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L<br />
(friction coefficient µ total = 0.09 to 0. 4);<br />
tightening torque M T = 7 Nm ± 0%,<br />
material no. R913000064<br />
or<br />
3<br />
53<br />
45<br />
6<br />
5<br />
Required surface quality<br />
of mating surface<br />
48<br />
– 4 socket head cap screws ISO 4762 - M5 x 50 - 10.9<br />
friction coefficient µ total = 0. 2 to 0. 7, results in a<br />
tightening torque M T = 8. Nm ± 0%<br />
(to be procured by you)<br />
88,5 15
Change language