Blackheart board - P8ntbox

More documents

Recommendations

Info

TABLE OF CONTENTS Installation 02 Shocker Operation/Adjustment 03-05 Ion Operation/Adjustment 06-08 Impulse Operation/Adjustment 09-11 Mode Descriptions 12-14 Tournament Settings 15 The Blackheart circuit board upgrade is available for the Smart Parts Impulse, Ion, SP-8, Epiphany, Shocker SFT, Nerve and Shocker NXT. It provides a significant increase in electronic control, adjustment and ease of programming. While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for errors or omissions. Smart Parts, Inc. reserves the right to change the specifications of the Blackheart at any time without prior notice. The latest version of this manual may be downloaded free of charge at www.SmartParts.com. 800.922.2147 www.smartparts.com 01
INSTALLATION PLEASE READ CAREFULLY BLACKHEART SELECTION The Blackheart upgrade is in the form of a replacement for your marker’s stock circuit board. It is available in three versions for use with different Smart Parts markers. The Ion version is designed for use with Ion, SP-8 and Epiphany markers. The Shocker version is compatible with the Shocker NXT, Shocker SFT and Nerve. As its name implies, the Impulse Blackheart board works with the Impulse. INSTALLING THE BLACKHEART To install the Blackheart, follow the disassembly instructions in your marker’s manual, remove the circuit board, and replace it with the Blackheart. It is recommended that you download the most recent manual for your marker at www.SmartParts.com. OPTIMIZING DWELL The default Dwell settings of the Blackheart board are designed to provide reliable operation with your marker. Optimizing the dwell setting will maximize the gas efficiency of your marker. Using the adjustment instructions in this manual, follow the dwell optimization procedure in your marker’s manual to achieve the ideal dwell setting for your particular marker configuration. EPIPHANY NOTES Ion Blackheart boards manufactured after the Fall of 2006 are equipped with hoses and a solenoid valve that are rated to operate in the pressure ranges utilized by the Epiphany as well as the Ion. These newer boards are easily identified by the protective wrapping on their solenoid coil. Epiphany certified Blackheart boards have a black Ion logo on a red background. Older Blackheart boards have a black wrap with a red logo, and should not be used in an Epiphany or Epiphany converted Ion or SP-8. 800.922.2147 www.smartparts.com 02
Page 1: BLACKHEART Installation and Adjustm
Page 5 and 6: SHOCKER ADJUSTMENT See the Modes se
Page 7 and 8: ION OPERATION These Instructions Ap
Page 9 and 10: ION ADJUSTMENT These Instructions A
Page 11 and 12: IMPULSE ADJUSTMENT See the Modes se
Page 13 and 14: MODE DESCRIPTION PLEASE READ CAREFU
Page 15 and 16: MODE DESCRIPTION PLEASE READ CAREFU

Blackheart board - P8ntbox

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?