Handrail Brackets - Wagnercompanies.com
Handrail Brackets - Wagnercompanies.com
Handrail Brackets - Wagnercompanies.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1<br />
⁄4" Formed Wall Mount <strong>Handrail</strong> <strong>Brackets</strong> shopwagner.<strong>com</strong><br />
BRACKETS<br />
CONNECTORS<br />
ELBOWS<br />
FLANGES<br />
SPHERES<br />
CAPS<br />
Aluminum 5052<br />
Steel 1006 – 1010<br />
Stainless Steel Type 304<br />
Brass<br />
C26000<br />
Finish: • Steel and Aluminum <strong>Brackets</strong> are unfinished.<br />
• Bronze and Stainless Steel <strong>Brackets</strong> are supplied with a<br />
satin finish.<br />
• Bright polished, anodized, plated and galvanized finishes<br />
are available on special order.<br />
Numbers in Italics denote items that may not be available for<br />
immediate shipment.<br />
• Denotes part shown in photograph.<br />
1<br />
⁄4" FORMED WALL MOUNT BRACKET<br />
• Available in Steel, Aluminum, Stainless Steel ( 3 ⁄16" thick) and<br />
Bronze.<br />
• One, two or three hole mounting options.<br />
• Snap-On Covers on Page B3 are used with these <strong>Brackets</strong> to<br />
cover the mounting hardware.<br />
1 3 / 4 "<br />
c 1"<br />
2 1 / 2 "<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
3"<br />
1<br />
⁄4" FORMED WALL MOUNT BRACKET<br />
ROUND SADDLE WITH ONE MOUNTING HOLE<br />
c Steel Aluminum Satin Stainless Satin Brass<br />
2 1 ⁄4" 1930R-24 1931R-24 1951R-24<br />
2 1 ⁄2" 1930R 1931R 1951R BRS1930R•<br />
View our drawing files online<br />
– shopwagner.<strong>com</strong> – to confirm<br />
dimensions and shape.<br />
Note: Images shown are typical – actual parts may vary slightly.<br />
View our drawing files at shopwagner.<strong>com</strong> for actual dimensions.<br />
Please review our quality expectations statement on Page U5.<br />
c<br />
2 1 /2"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
1 3 /4"<br />
1"<br />
3"<br />
Made in<br />
Milwaukee<br />
1<br />
⁄4" FORMED WALL MOUNT BRACKET<br />
FLAT SADDLE WITH ONE MOUNTING HOLE<br />
c Steel Aluminum Satin Stainless<br />
2 1 ⁄2" 1930F 1931F• 1951F<br />
SLIP-ON<br />
FITTINGS<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
1<br />
⁄4" FORMED WALL MOUNT BRACKET<br />
ROUND SADDLE WITH TWO MOUNTING HOLES<br />
c Steel Aluminum<br />
2 1 ⁄2" 1932R 1933R•<br />
Clear Holes for<br />
1 /4" Mounting Bolts<br />
1<br />
⁄4" FORMED WALL MOUNT BRACKET<br />
FLAT SADDLE WITH TWO MOUNTING HOLES<br />
c Steel Aluminum<br />
2 1 ⁄2" 1932F 1933F•<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
1<br />
⁄4" FORMED WALL MOUNT BRACKET<br />
ROUND SADDLE WITH THREE MOUNTING HOLES<br />
c Steel Aluminum<br />
2 1 ⁄2" 1936R 1937R•<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
1<br />
⁄4" FORMED WALL MOUNT BRACKET<br />
FLAT SADDLE WITH THREE MOUNTING HOLES<br />
c Steel Aluminum<br />
2 1 ⁄2" 1936F 1937F•<br />
B2<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong>
wagner<strong>com</strong>panies.<strong>com</strong><br />
1<br />
⁄4" Formed Wall Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
1<br />
⁄4" FORMED BRACKET UNIVERSAL SADDLE, 3 1 ⁄4" CENTER LINE Universal Saddle Fits Round and Flat Materials.<br />
Dimensioned to Meet NFPA, ICC, ANSI A117.1 and 2010 ADA.<br />
1 3 /4"<br />
3 1 /4"<br />
1"<br />
1 1 /2"<br />
1<br />
⁄4" FORMED BRACKET ROUND SADDLE, 3" CENTER LINE<br />
3"<br />
2 7 /16"<br />
Clear Hole for<br />
3<br />
/ 8 " Mounting Bolt<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
1 3 / 4 "<br />
1"<br />
3"<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
Steel<br />
Steel<br />
Steel Aluminum Aluminum Aluminum Satin Stainless Satin Stainless Satin Stainless Satin Brass<br />
With 1 Hole With 2 Holes With 3 Holes With 1 Hole With 2 Holes With 3 Holes With 1 Hole With 2 Holes With 3 Holes With 1 Hole<br />
1938R 1940R 1944R 1939R 1941R 1945R 1959R• 1959R-2 1959R-3 BRS1938R<br />
1<br />
⁄4" FORMED BRACKET FLAT SADDLE, 3" CENTER LINE<br />
3"<br />
3 1 /8"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
2 7 /16"<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
3"<br />
Steel<br />
Steel<br />
Steel<br />
Aluminum Aluminum Aluminum Satin Stainless Satin Stainless Satin Stainless<br />
With 1 Hole With 2 Holes With 3 Holes With 1 Hole With 2 Holes With 3 Holes With 1 Hole With 2 Holes With 3 Holes<br />
1929• 1929-2 1929-3 1937 1937-2 1937-3 1952 1952-2 1952-3<br />
1 3 /4"<br />
1"<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
3"<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
SLIP-ON<br />
FITTINGS<br />
Steel<br />
With 1 Hole<br />
Steel<br />
With 2 Holes<br />
Steel<br />
With 3 Holes<br />
Aluminum<br />
With 1 Hole<br />
Aluminum<br />
With 2 Holes<br />
Aluminum<br />
With 3 Holes<br />
Satin Stainless<br />
With 1 Hole<br />
Satin Stainless<br />
With 2 Holes<br />
Satin Stainless<br />
With 3 Holes<br />
Satin Brass<br />
With 1 Hole<br />
1938F 1940F 1944F 1939F 1941F 1945F 1959F• 1959F-2 1959F-3 BRS1938F<br />
• Denotes part shown in photograph.<br />
h Threaded<br />
Holes<br />
SNAP-ON COVER<br />
For concealed mounting of single hole Formed<br />
<strong>Brackets</strong> shown on Page B2 and B3. Two and<br />
Three Hole <strong>Brackets</strong> must be countersunk to use<br />
these covers.<br />
Steel Aluminum Satin Stainless Satin Brass<br />
1960 1961 1962 1963<br />
View our drawing files online to confirm<br />
dimensions and shape.<br />
Clear Hole for<br />
3<br />
/8" Mounting Bolt<br />
STYLE B FILLER<br />
1<br />
⁄4-20 × 1 ⁄2" Round Head Screws<br />
included.<br />
h<br />
5<br />
⁄8"<br />
Steel<br />
4579<br />
7<br />
⁄8" 4579B<br />
Use Filler to prevent overtightening of matching handrail<br />
Bracket which may result in cracking the drywall.<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
2 5 /8"<br />
for 1 /4-20<br />
Mounting<br />
Screws<br />
B3<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS
Style B and 3 ⁄16" Formed Wall Mount <strong>Handrail</strong> Bracket<br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
CONNECTORS<br />
ELBOWS<br />
FLANGES<br />
SPHERES<br />
CAPS<br />
Steel 1006 – 1010<br />
Stainless Steel Type 304<br />
Brass<br />
C26000<br />
Bronze<br />
C28000 (Muntz Metal)<br />
Finish: • Steel <strong>Brackets</strong> are unfinished.<br />
• Bronze and Stainless Steel <strong>Brackets</strong><br />
are supplied with a satin finish.<br />
• Bright polished, anodized, plated and<br />
galvanized finishes are available on<br />
special order.<br />
Numbers in Italics denote items that may not be available for<br />
immediate shipment.<br />
• Denotes part shown in photograph.<br />
STYLE B BRACKET – 3 ⁄16" FORMED<br />
A Wagner Original<br />
• Tested to a 300 lb. concentrated load.<br />
• Universal Saddle for use with flat or round sections.<br />
c<br />
2 5 / 8 "<br />
Clear Hole for<br />
3<br />
/ 8 " Mounting Bolt<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
1 3 / 4 "<br />
1"<br />
2 3 /4"<br />
STYLE B BRACKET WITH ONE MOUNTING HOLE<br />
c Steel Satin Stainless Satin Muntz<br />
2 1 ⁄2" 3418 3422 3423•<br />
2 1 ⁄2" 3418-NSH*<br />
3" 3426 3430 3431<br />
3" 3426-NSH*<br />
*NSH denotes No Saddle Hole.<br />
REDESIGNED STYLE B BRACKET<br />
The original Wagner Style B Formed <strong>Handrail</strong> Bracket has been<br />
redesigned to adjust the vertical clearance from the underside of the<br />
<strong>Handrail</strong> to the horizontal arm of the Bracket.<br />
This Style B Formed <strong>Handrail</strong> Bracket offers a 1 1 ⁄2" horizontal<br />
and vertical clearance to meet code requirements and the<br />
re<strong>com</strong>mendations of the 2010 ADA Standards for Accessible Design<br />
(ADASAD).<br />
1 3 /4"<br />
2 1 /2"<br />
1"<br />
1 1 /2"<br />
3 9 /16"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
2 3 /4"<br />
REDESIGNED STYLE B BRACKET WITH ONE HOLE<br />
c Steel Satin Stainless Satin Muntz<br />
2 1 ⁄2" 3419• 3420 3421<br />
2 1 ⁄2" 3419-NSH 3420-NSH<br />
*NSH denotes No Saddle Hole.<br />
Note: Images shown are typical – actual parts may vary slightly.<br />
View our drawing files at shopwagner.<strong>com</strong> for actual dimensions.<br />
Please review our quality expectations statement on Page U5.<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
Clear Holes for<br />
1 /4" Mounting Bolts<br />
STYLE B BRACKET WITH TWO MOUNTING HOLES<br />
c Steel Satin Stainless<br />
2 1 ⁄2" 3434• 3438<br />
3" 3442 3446<br />
MISC<br />
PRODUCTS<br />
Clear Holes for<br />
1 /4" Mounting Bolts<br />
STYLE B BRACKET WITH THREE MOUNTING HOLES<br />
c Steel Satin Stainless<br />
2 1 ⁄2" 3458• 3462<br />
3" 3466 3470<br />
B4<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong>
wagner<strong>com</strong>panies.<strong>com</strong><br />
3<br />
⁄16" Formed Wall Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
STYLE C BRACKET 3 ⁄16" FORMED<br />
• For flat walls or attach to Pipe and Round Tube Posts – with<br />
Style H Adapter.<br />
• Square and Rectangular Tube Posts.<br />
• Limited mounting space.<br />
• Universal Saddle for use with flat or round sections.<br />
1 3 /8"<br />
c<br />
5 /8"<br />
1 /4" Holes<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
1 3 /4"<br />
2 7 /16"<br />
Use Style H Adapter to<br />
Mount to Round Posts.<br />
STYLE C BRACKET WITH ONE MOUNTING HOLE<br />
c Steel Satin Stainless Satin Muntz<br />
2 1 ⁄2" 3474 3478 3479<br />
3" 3482 3486 3487•<br />
c<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
Clear Holes for<br />
1 /4" Mounting Bolts<br />
OD<br />
1 3 /8"<br />
5<br />
/8"<br />
1 3 / 4 "<br />
STYLE C BRACKET WITH TWO MOUNTING HOLES<br />
c Steel Satin Stainless<br />
2 1 ⁄2" 3490• 3494<br />
3" 3498 3502<br />
2 7 / 16 "<br />
STYLE H ADAPTER<br />
Adapts Style C Bracket for use with<br />
Pipe or Tube.<br />
Pipe Size Pipe OD Steel<br />
1 1 ⁄4" 1.66" 3535•<br />
1 1 ⁄2" 1.90" 3540<br />
2" 2.38" 1902<br />
UNIVERSAL WELD BRACKET<br />
Many local code authorities now require a clearance of 1 1 ⁄2" between<br />
the underside of a <strong>Handrail</strong> and the Bracket arm. This stamped<br />
Bracket will meet this requirement. It is for welded applications and<br />
will work with any flat or round railing section.<br />
1 1 /2"<br />
2 1 /4"<br />
1"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
1 /4" 2"<br />
UNIVERSAL WELD BRACKET<br />
Steel Aluminum<br />
Satin<br />
Stainless Brass Bronze<br />
1980ST 1980AL 1980SS 1980BR 1980BZ<br />
Load data is available for these <strong>Brackets</strong> upon request.<br />
FORMED EXTRUDED STYLE BRACKET<br />
c<br />
Clear Holes<br />
for 1 /4"<br />
Mounting<br />
Screws<br />
Clear Hole for<br />
3<br />
/8" Mounting Bolt<br />
1 3 /4"<br />
1"<br />
FORMED EXTRUDED STYLE BRACKET<br />
ROUND SADDLE<br />
a c 1<br />
⁄4" Thick Steel 3<br />
⁄16" Thick Satin Stainless<br />
2 1 ⁄4" 2 5 ⁄8" 1970R• 1990R<br />
2 1 ⁄2" 3" 1978R 1998R<br />
1 3 /4"<br />
c 1"<br />
a<br />
3 13 /32"<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
Made in<br />
Milwaukee<br />
Clear Holes<br />
1<br />
for /4"<br />
Mounting<br />
Screws<br />
a<br />
BIKE<br />
RACKS<br />
STYLE F FILLER<br />
Use with one hole Style C Bracket.<br />
Depth<br />
Steel<br />
5<br />
⁄8" 3545B•<br />
7<br />
⁄8" 3545<br />
1 5 ⁄8" diameter with one clear hole for 3 ⁄8" Mounting Bolt.<br />
Use Filler to prevent overtightening of matching <strong>Handrail</strong> Bracket<br />
which may result in cracking the drywall.<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
FORMED EXTRUDED STYLE BRACKET<br />
FLAT SADDLE<br />
a c 1<br />
⁄4" Thick Steel 3<br />
⁄16" Thick Satin Stainless<br />
2 3 ⁄8" 2 5 ⁄8" 1970F• 1990F<br />
2 5 ⁄8" 3" 1978F 1998F<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
• Denotes part shown in photograph.<br />
B5<br />
MISC<br />
PRODUCTS
Traditional Cast Wall Mount <strong>Brackets</strong><br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
Malleable Iron<br />
Finish: • Malleable Iron <strong>Brackets</strong> are unfinished.<br />
• Plated and galvanized finishes are available on special<br />
order.<br />
c<br />
1 1 /16"<br />
2 1 /8"<br />
1 3 /8"<br />
Numbers in Italics denote items that may not be available for<br />
immediate shipment.<br />
• Denotes part shown in photograph.<br />
c<br />
1"<br />
2 1 /2"<br />
1 1 /2"<br />
CONNECTORS<br />
a<br />
r = 3 /4"<br />
C'sunk for<br />
1<br />
/4" Screw<br />
b<br />
d<br />
a<br />
C'sunk for<br />
1 /4" Screw<br />
b<br />
d<br />
ELBOWS<br />
3 /8"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
2 3 /4"<br />
CAST WALL MOUNT BRACKET<br />
ROUND SADDLE WITH ONE MOUNTING HOLE<br />
a b c d Malleable Iron<br />
1 1 ⁄2" 2 1 ⁄4" 2 1 ⁄2" 3 5 ⁄8" 1765•<br />
1 1 ⁄4" 2 1 ⁄4" 3" 3 5 ⁄8" 1770<br />
3<br />
/8"<br />
Clear Hole for<br />
/8" Mounting Bolt 2 3 /4"<br />
CAST WALL MOUNT BRACKET<br />
FLAT SADDLE WITH ONE MOUNTING HOLE<br />
a b c d Malleable Iron<br />
1 1 ⁄2" 2 15 ⁄16" 2 1 ⁄2" 4 5 ⁄16" 1786•<br />
1 1 ⁄2" 2 15 ⁄16" 3" 4 5 ⁄16" 1791<br />
BIKE<br />
RACKS<br />
FLANGES<br />
SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
Clear Holes for<br />
1 /4" Mounting Bolts<br />
CAST WALL MOUNT BRACKET<br />
ROUND SADDLE WITH TWO MOUNTING HOLES<br />
a b c d Malleable Iron<br />
1 1 ⁄4" 2 1 ⁄4" 2 1 ⁄2" 3 5 ⁄8" 1775•<br />
1 1 ⁄4" 2 1 ⁄4" 3" 3 5 ⁄8" 1780<br />
CAST WALL MOUNT BRACKET<br />
ROUND SADDLE<br />
WITH TWO COUNTERSUNK MOUNTING HOLES<br />
a b c d Malleable Iron<br />
1 1 ⁄4" 2 1 ⁄4" 2 1 ⁄2" 3 5 ⁄8" 1775-2<br />
1 1 ⁄4" 2 1 ⁄4" 3" 3 5 ⁄8" 1780-2<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
CAST WALL MOUNT BRACKET<br />
FLAT SADDLE WITH TWO MOUNTING HOLES<br />
a b c d Malleable Iron<br />
1 1 ⁄2" 2 15 ⁄16" 2 1 ⁄2" 4 5 ⁄16" 1786-2•<br />
1 1 ⁄2" 2 15 ⁄16" 3" 4 5 ⁄16" 1791-2<br />
Clear Holes for<br />
1 /4" Mounting Bolts<br />
Clear Holes for<br />
1 /4" Mounting Bolts<br />
MISC<br />
PRODUCTS<br />
CAST WALL MOUNT BRACKET<br />
ROUND SADDLE WITH THREE MOUNTING HOLES<br />
a b c d Malleable Iron<br />
1 1 ⁄4" 2 1 ⁄4" 2 1 ⁄2" 3 5 ⁄8" 1775-3•<br />
1 1 ⁄4" 2 1 ⁄4" 3" 3 5 ⁄8" 1780-3<br />
CAST WALL MOUNT BRACKET<br />
FLAT SADDLE WITH THREE MOUNTING HOLES<br />
a b c d Malleable Iron<br />
1 1 ⁄2" 2 15 ⁄16" 2 1 ⁄2" 4 5 ⁄16" 1786-3•<br />
1 1 ⁄2" 2 15 ⁄16" 3" 4 5 ⁄16" 1791-3<br />
B6<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong>
wagner<strong>com</strong>panies.<strong>com</strong><br />
Traditional Cast Wall Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
Stainless Steel Type 304, ASTM A 351<br />
Aluminum Alloy B585.2 ASTM B 26<br />
Bronze<br />
C86500<br />
Finish: • Aluminum, Bronze and Stainless Steel <strong>Brackets</strong> are<br />
supplied with a satin finish.<br />
• Aluminum satin clear anodized finish is<br />
AA-M32-C22-A31.<br />
• A bright polished finish is available on special order.<br />
a<br />
c<br />
Clear Hole for<br />
3<br />
/8" Mounting Bolt<br />
C'sunk for<br />
1 /4" Screw<br />
ROUND SADDLE<br />
WITH ONE MOUNTING HOLE<br />
2 1 /4"<br />
1 1 /2"<br />
2 3 /4"<br />
b<br />
Numbers in Italics denote items that may not be available for<br />
immediate shipment.<br />
• Denotes part shown in photograph.<br />
Note: Flat Saddle Bracket is produced by grinding Round Saddle<br />
Bracket of matching dimensions.<br />
Note: Porosity is a normal attribute of cast products. Every effort<br />
is made to minimize the appearance of porosity. However, minor<br />
pitting can not be avoided and is to be expected.<br />
Round Saddle<br />
FLAT SADDLE<br />
WITH ONE MOUNTING HOLE<br />
Flat Saddle<br />
a b c<br />
Satin<br />
Aluminum<br />
Anodized<br />
Aluminum<br />
Satin<br />
Stainless<br />
Satin<br />
Bronze<br />
Satin<br />
Aluminum<br />
Anodized<br />
Aluminum<br />
Satin<br />
Stainless<br />
Satin<br />
Bronze<br />
1 1 ⁄2" 2 15 ⁄16" 2 1 ⁄2" 1805• 1805AN 1815 1813 1805F• 1805FAN 1815F 1813F<br />
1 1 ⁄2" 2 15 ⁄16" 3 1 ⁄4" 1806 1806AN 1816 1814 1806F 1806FAN 1816F 1814F<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
ROUND SADDLE<br />
WITH TWO MOUNTING HOLES<br />
Round Saddle<br />
FLAT SADDLE<br />
WITH TWO MOUNTING HOLES<br />
Flat Saddle<br />
a b c<br />
Satin<br />
Aluminum<br />
Anodized<br />
Aluminum<br />
Satin<br />
Stainless<br />
Satin<br />
Aluminum<br />
Anodized<br />
Aluminum<br />
Satin<br />
Stainless<br />
1 1 ⁄2" 2 15 ⁄16" 2 1 ⁄2" 1805-2• 1805-2AN 1815-2 1805F-2• 1805F-2AN 1815F-2<br />
1 1 ⁄2" 2 15 ⁄16" 3 1 ⁄4" 1806-2 1806-2AN 1816-2 1806F-2 1806F-2AN 1816F-2<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
ROUND SADDLE<br />
WITH THREE MOUNTING HOLES<br />
Round Saddle<br />
FLAT SADDLE<br />
WITH THREE MOUNTING HOLES<br />
Flat Saddle<br />
a b c<br />
Satin<br />
Aluminum<br />
Anodized<br />
Aluminum<br />
Satin<br />
Stainless<br />
Satin<br />
Aluminum<br />
Anodized<br />
Aluminum<br />
Satin<br />
Stainless<br />
1 1 ⁄2" 2 15 ⁄16" 2 1 ⁄2" 1805-3• 1805-3AN 1815-3 1805F-3• 1805F-3AN 1815F-3<br />
1 1 ⁄2" 2 15 ⁄16" 3 1 ⁄4" 1806-3 1806-3AN 1816-3 1806F-3 1806F-3AN 1816F-3<br />
MISC<br />
PRODUCTS<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
B7
Cast Wall Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
CONNECTORS<br />
ELBOWS<br />
Malleable Iron 535.2, ASTM A 47<br />
Stainless Steel Type 304, ASTM A 351<br />
Aluminum Alloy B585.2 ASTM B 26<br />
Bronze<br />
C86500<br />
Brass<br />
Yellow Brass, C27000<br />
Finish: • Malleable Iron <strong>Brackets</strong> are unfinished.<br />
Aluminum, Bronze and Stainless Steel <strong>Brackets</strong> are<br />
supplied with a satin finish.<br />
• Satin clear anodized finish is AA M32 C22 A21.<br />
• Bright polished, anodized, plated and galvanized<br />
finishes are available on special order.<br />
Numbers in Italics denote items that may not be available for<br />
immediate shipment.<br />
STYLE D CAST HANDRAIL BRACKET<br />
These <strong>Brackets</strong> have been newly designed to meet the requirements for a vertical clearance between the underside of the <strong>Handrail</strong> and the<br />
Bracket arm of 1 1 ⁄2".<br />
c<br />
c<br />
1" 2 1 /8"<br />
1" 2 1 /8"<br />
5<br />
/16"<br />
1 1 /2"<br />
4592<br />
4596<br />
Note: Porosity is a normal attribute of cast products. Every effort is<br />
made to minimize the appearance of porosity, but minor pitting can<br />
not be avoided and is to be expected.<br />
5<br />
/16"<br />
1 1 /2"<br />
FLANGES<br />
SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
3<br />
/8-16<br />
Tapped Hole<br />
3 1 /8"<br />
UNIVERSAL SADDLE FITS ROUND AND FLAT MATERIALS<br />
WITH ONE 3 ⁄8-16 TAPPED HOLE<br />
Satin Anodized<br />
Aluminum<br />
c Malleable Iron Satin Aluminum<br />
Satin Bronze<br />
2 1 ⁄2" 4591• 4592 4592AN 4596<br />
3 1 ⁄4" 4581 4582 4582AN 4586<br />
• Denotes part shown in photograph.<br />
BRACKET WALL FILLER<br />
These optional Fillers are for plaster walls or wall<br />
board to prevent overtightening of matching <strong>Handrail</strong><br />
Bracket which may result in cracking the drywall.<br />
Available with one clear center hole for 3<br />
⁄8"<br />
Mounting Bolt or three tapped clear holes for 1 ⁄4"<br />
STYLE B FILLER<br />
3 1 /8"<br />
UNIVERSAL SADDLE FITS ROUND AND FLAT MATERIALS<br />
WITH THREE 1 ⁄4" HOLES<br />
h<br />
Steel<br />
5<br />
⁄8" 4579<br />
7<br />
⁄8" 4579B<br />
1<br />
⁄4-20 × 1 ⁄2" Round Head<br />
Screws included.<br />
Mounting Bolts. These Fillers are used with Style D Cast <strong>Handrail</strong> <strong>Brackets</strong>. Use<br />
plated Steel Fillers with Aluminum and Bronze <strong>Brackets</strong> – call for availability or email<br />
modifiedstock@mailwagner.<strong>com</strong>.<br />
Satin Anodized<br />
Aluminum<br />
c Malleable Iron Satin Aluminum<br />
Satin Bronze<br />
2 1 ⁄2" 4591-3 4592-3• 4592AN-3 4596-3<br />
3 1 ⁄4" 4581-3 4582-3 4582AN-3 4586-3<br />
2 5 /8"<br />
h<br />
Threaded<br />
Holes<br />
for 1 /4-20<br />
Mounting<br />
Screws<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
c<br />
1 7 /8"<br />
1 1 /4"<br />
c<br />
1 5 /8"<br />
1 3 /16"<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS<br />
2 1 /2"<br />
B8<br />
2 1 /8"<br />
Countersunk<br />
1 /4" Holes<br />
CAST WALL MOUNTING BRACKET FOR TUBE<br />
Saddle fits 1.500" or 2.000" OD Stainless and Brass Tube.<br />
Satin<br />
Stainless<br />
Polished<br />
Stainless<br />
Polished<br />
Brass<br />
Tube OD<br />
c<br />
1.500" 2 1 ⁄2" 151534.4 151534<br />
1.500" 2 5 ⁄8" 141534<br />
2.000" 2 3 ⁄4" 152034.4 152034<br />
2.000" 2 5 ⁄8" 142034<br />
1 3 /4"<br />
5 /16" Tapped Hole<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
2 1 /2"<br />
CAST WALL MOUNTING BRACKET FOR TUBE<br />
Saddle fits 1.500" or 2.000" OD Brass Tube.<br />
Supplied with a polished finish. 5 ⁄16" Hanger Bolt is included.<br />
Polished<br />
Tube OD<br />
c<br />
Brass<br />
1.500" 2 1 ⁄2" 141535<br />
2.000" 2 3 ⁄4" 142035
wagner<strong>com</strong>panies.<strong>com</strong><br />
Cast Wall Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
STYLE U CAST BRACKET WITH UNIVERSAL SADDLE<br />
Ductile Iron<br />
Finish: • Ductile Iron <strong>Brackets</strong> are unfinished.<br />
• Plated and galvanized finishes are available on special order.<br />
2"<br />
c<br />
1"<br />
3 3 /4"<br />
3<br />
/8"<br />
2 1 /4"<br />
2 3 /4"<br />
3 /8 -16<br />
Tapped Hole<br />
1 1 /2"<br />
Countersunk<br />
for 1 /4" Screws<br />
Typical Filler Use<br />
UNIVERSAL SADDLE FITS ROUND AND FLAT MATERIALS<br />
WITH ONE 3 ⁄8-16 TAPPED HOLE<br />
Satin Anodized<br />
Aluminum<br />
c Ductile Iron Satin Aluminum<br />
Satin Stainless<br />
2 1 ⁄2" 1701-2 1715-2 1715-2AN 1729-2<br />
3" 1701• 1715 1715AN 1729<br />
Clear Holes for<br />
1 /4" Mounting Bolts<br />
Typical Anchor Plate Use<br />
UNIVERSAL SADDLE FITS ROUND AND FLAT MATERIALS<br />
WITH TWO 1 ⁄4" HOLES<br />
Satin Anodized<br />
Aluminum<br />
c Ductile Iron Satin Aluminum<br />
Satin Stainless<br />
2 1 ⁄2" 1703-2 1717-2 1717-2AN 1731-2<br />
3" 1703• 1717 1717AN 1731<br />
FILLER<br />
For use with one hole or three hole Style U <strong>Brackets</strong><br />
only.<br />
3 1 /4"<br />
13 /16"<br />
1 /8"<br />
Center Hole Steel For Use In<br />
7<br />
⁄16" 1721 Plaster<br />
7<br />
⁄16" 1722 Drywall<br />
1721 Filler has one 7 ⁄16" diameter center hole, and<br />
three untapped holes. For use with 5 ⁄8" drywall.<br />
1722 Filler has one 7 ⁄16" diameter center hole, and<br />
three tapped holes with matching 1 ⁄4" × 3 ⁄8" Round<br />
Head Screws. For use with 5 ⁄8" drywall.<br />
Use Filler to prevent overtightening of matching<br />
<strong>Handrail</strong> Bracket which may result in cracking the<br />
drywall.<br />
ANCHOR PLATE<br />
3 1 /4"<br />
3<br />
/16"<br />
1 /4-20<br />
Tapped Hole<br />
For use with Style U <strong>Brackets</strong> only. Six tapped holes<br />
and 7 ⁄16" center hole with 1 ⁄4" Round Head Bolts.<br />
Cener Hole<br />
Steel<br />
7<br />
⁄16" B1416<br />
• Denotes part shown in photograph.<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
Clear Holes for<br />
1<br />
/4" Mounting Bolts<br />
SLIP-ON<br />
FITTINGS<br />
UNIVERSAL SADDLE FITS ROUND AND FLAT MATERIALS<br />
WITH THREE 1 ⁄4" HOLES<br />
Satin Anodized<br />
Aluminum<br />
c Ductile Iron Satin Aluminum<br />
Satin Stainless<br />
2 1 ⁄2" 1705-2 1719-2 1719-2AN 1733-2<br />
3" 1705• 1719 1719AN 1733<br />
BIKE<br />
RACKS<br />
Satin<br />
Aluminum<br />
Satin Anodized<br />
Aluminum<br />
See Page B18 - B21 for<br />
Slip-Fit <strong>Brackets</strong>.<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
B9<br />
MISC<br />
PRODUCTS
Wall Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
1 1 /2"<br />
c<br />
Holes for<br />
#10 FHMS<br />
2"<br />
1 1 /4"<br />
2 5 /8"<br />
2 7 /8"<br />
c<br />
Holes for<br />
#10 FHMS<br />
2"<br />
1 1 /4"<br />
1 7 /8"<br />
CONNECTORS<br />
2 5 /8"<br />
5 /16"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
EXTRUDED HANDRAIL BRACKET, SQUARE BASE<br />
c Burnished* Aluminum Anodized Aluminum<br />
2 1 ⁄2" ER8103 ER8103A<br />
3 1 ⁄4" ER8003 ER8003A<br />
1 1 /8"<br />
5<br />
/16"<br />
Clear Hole for<br />
3<br />
/8" Mounting Bolt<br />
EXTRUDED HANDRAIL BRACKET<br />
Universal Saddle fits 1.500" thru 3.000" OD and flat surfaces.<br />
c Burnished* Stainless Satin Stainless<br />
2 1 ⁄2" BER9001 ER9001<br />
3" BER9002 ER9002<br />
ELBOWS<br />
FLANGES<br />
SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS<br />
2 1 /2"<br />
5<br />
/16"<br />
1 1 /2"<br />
EXTRUDED HANDRAIL BRACKET, ROUND BASE<br />
c Burnished* Aluminum<br />
2 1 ⁄2" ER8104<br />
3 1 ⁄4" ER8004<br />
* A Burnished Finish is tumbled, but not polished. This removes burrs<br />
and creates a "matte" finish.<br />
B10<br />
c<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
Holes for<br />
#10 FHMS<br />
2"<br />
1 1 /4"<br />
LONG LENGTH SHAPE<br />
The Extruded <strong>Handrail</strong> Bracket shown above is also available in<br />
5' lengths – with no holes. Use to create <strong>Brackets</strong> for your specific<br />
requirements.<br />
c lb/ft length Aluminum Anodized Aluminum<br />
2 1 ⁄2" 2.50 5' BER8103 BER8103A<br />
3 1 ⁄4" 2.50 5' BER8003 BER8003A<br />
While the 1991 ADAAG stated that the distance between the wall<br />
and <strong>Handrail</strong> had to be 1 1 ⁄2", all subsequently published model<br />
codes – including the 2010 ADASAD – now state this to be a<br />
minimum requirement.<br />
Be aware however that NFPA 101 notes a minimum wall clearance<br />
of 2 1 ⁄4" between the wall and <strong>Handrail</strong>. Always confirm requirments<br />
with the local authority having jurisdiction prior to specifying any<br />
Railing products.<br />
Not all <strong>Brackets</strong> will meet all code requirements. Confirm<br />
your local requirements and the Bracket dimensions prior to<br />
specifying.<br />
2 5 /8"<br />
1"<br />
2 1 /2"<br />
1 1 /2"<br />
c<br />
EXTRUDED WALL MOUNT SLIP-FIT BRACKET<br />
c<br />
Satin Aluminum<br />
2 1 ⁄2" ER8104SF<br />
3 1 ⁄4" ER8004SF<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
1.90"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
4"<br />
BUILDING CODE ISSUES<br />
Check with your local code authorities prior to specifying any<br />
railing system. The following are the most <strong>com</strong>mon requirements in<br />
<strong>com</strong>mercial and residential applications:<br />
• <strong>Handrail</strong> is required on stairs and ramps.<br />
• Height: 34 to 38 inches above stair nosings and ramp surfaces.<br />
• Load Requirements:<br />
• 50 lbs/ft uniform load or<br />
• 200 lbs. concentrated load<br />
• Clearance:<br />
• Between wall and <strong>Handrail</strong>: 1 1 ⁄2" minimum<br />
• Exceptions:<br />
• NFPA 101: 2 1 ⁄4" minimum<br />
• 1991 ADAAG: 1 1 ⁄2" between the wall and <strong>Handrail</strong><br />
(Updated to 1 1 ⁄2" minimum for 2010 ADASAD)<br />
• Between underside of <strong>Handrail</strong> and horizontal Bracket Arm:<br />
• 1 1 ⁄2" minimum<br />
• Exceptions:<br />
• For each 1 ⁄2" of additional <strong>Handrail</strong> perimeter dimension<br />
above 4", the vertical clearance dimension of 1 1 ⁄2" shall<br />
be reduced by 1 ⁄4".<br />
Subtract From Clearance From<br />
Railing Diameter Perimeter Underside of Railing Underside of Railing<br />
1.25" 3.92" 0 1 1 ⁄2"<br />
1.50" 4.71" - 1 ⁄8" 1 3 ⁄8"<br />
1.66" 5.21" - 1 ⁄4" 1 1 ⁄4"<br />
1.90" 5.97" - 1 ⁄2" 1"<br />
2.00" 6.28" - 1 ⁄2" 1"<br />
Refer to Page U8 for other code related information.<br />
2 5 /8"<br />
1"<br />
1.66"
wagner<strong>com</strong>panies.<strong>com</strong><br />
Bar <strong>Brackets</strong> and Components<br />
BAR BRACKET COMPONENTS<br />
These <strong>com</strong>ponents provide the parts necessary to fabricate <strong>Brackets</strong><br />
for your unique requirements. Weld the Bracket Arm directly to your<br />
Post or attach to a Bracket Base to make a Wall Mount <strong>Handrail</strong><br />
Bracket. Trim the Bracket Arm as needed to match your projection<br />
requirements.<br />
BRACKET SADDLE<br />
• 2 1 ⁄2" long × 1" wide × 12 ga.<br />
• With two 1 ⁄4" holes and one 3 ⁄8" center<br />
hole for 1.500" to 2.000" OD. Mill Finish.<br />
Steel<br />
3003<br />
Aluminum<br />
304<br />
Stainless<br />
C26000<br />
Brass<br />
C28000<br />
Bronze<br />
S101 S102• S103 S104 S105<br />
BRACKET ARM<br />
• Inside Radius = Bar Diameter × 1.50".<br />
• Ends untrimmed, no holes; 3" legs.<br />
• Mill finish.<br />
• Contact Wagner for finish and hole options.<br />
Bar Diameter Steel<br />
6063<br />
Aluminum<br />
304<br />
Stainless<br />
C36000<br />
Brass<br />
C38500<br />
Bronze<br />
1<br />
⁄2" R110 R240 R120 R130 R210<br />
5<br />
⁄8" R140 R250 R150 R160• R220<br />
3<br />
⁄4" R170 R260 R180 R190 R230<br />
BRACKET BASE<br />
• 3" diameter × 1 ⁄4" thick.<br />
• With or without holes.<br />
• Mill finish.<br />
• Contact Wagner for finish and other hole<br />
configuration options.<br />
Hole Size Steel<br />
5052<br />
Aluminum<br />
304<br />
Stainless<br />
C26000<br />
Brass<br />
C28000<br />
Bronze<br />
No Hole D143 D144 D145 D146 D146M<br />
1<br />
⁄2" D143C5 D144C5 D145C5 D146C5 D146MC5<br />
5<br />
⁄8" D143C6• D144C6 D145C6 D146C6 D146MC6<br />
3<br />
⁄4" D143C7 D144C7 D145C7 D146C7<br />
• Denotes part shown in photograph.<br />
ASSEMBLED BAR BRACKET<br />
These <strong>Brackets</strong> are assembled from the Components shown on<br />
this page. Provided with three countersunk holes for 1 ⁄4" Mounting<br />
Screws.<br />
When longer Bracket Arms are called for, Wagner can fabricate<br />
Bar Bends specific for your job. Be aware that longer Bracket<br />
Arms will increase stress at the wall connection. Reducing Bracket<br />
spacing will strengthen the rail in such cases. Consult with a<br />
structural engineer in extreme situations. Contact modifiedstock@<br />
mailwagner.<strong>com</strong>.<br />
SNAP-ON COVER FLANGE AND BASE<br />
For Clean, Concealed Mounting of <strong>Handrail</strong> <strong>Brackets</strong>.<br />
These Flange Bases and Snap-On Flanges are engineered for<br />
installations that require securely covered anchorage. They provide<br />
a unique lock-down system for non-structural covering of Anchor<br />
Bolts in a variety of materials.<br />
The secure connection<br />
Bracket Saddle<br />
of the Snap-On Cover to Snap-On Cover Flange Base<br />
Flange Base is provided by<br />
formed tabs produced with<br />
precise tolerances.<br />
The Anchor Plate and<br />
Cover Flange may be<br />
dissimilar metals.<br />
SNAP-ON COVER FLANGE<br />
Mill Finish. Contact Wagner for other options.<br />
18 ga. 3 1 ⁄4" diameter 1<br />
⁄2" high<br />
Refer to Page E11 for additional sizes.<br />
3 1 /4"<br />
Bracket Arm<br />
Snap-On<br />
Cover Flange<br />
Hole<br />
Steel<br />
3033<br />
Aluminum<br />
304<br />
Stainless<br />
C26000<br />
Brass<br />
1<br />
⁄2" 2021 2022 2023• 2024<br />
5<br />
⁄8" 2031 2032 2033 2034<br />
3<br />
⁄4" 2041 2042 2043 2044<br />
SNAP-ON COVER FLANGE BASE<br />
.180" thick.<br />
3.17" diameter.<br />
Three clear mounting holes for 1 ⁄4" bolts.<br />
Refer to Page E11 for additional sizes.<br />
3033<br />
304<br />
C26000<br />
Center Hole Steel Aluminum Stainless Brass<br />
1<br />
⁄2" 2021B 2022B 2023B 2024B<br />
5<br />
⁄8" 2031B 2032B 2033B 2034B<br />
3<br />
⁄4" 2041B 2042B 2043B 2044B<br />
3<br />
⁄4" 2042C*<br />
* With two countersunk mounting holes.<br />
Custom designs are also available to meet your specific<br />
requirements. Contact Wagner with your requirements.<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
1.87"<br />
c<br />
2.40"<br />
2 7 /16"<br />
1 3 /4 "<br />
Note: Steel and Stainless Saddles are welded in place. Brass Saddle is screwed in place.<br />
BIKE<br />
RACKS<br />
3"<br />
c Mill Finish Steel Satin Stainless Satin Brass<br />
2 1 ⁄2" RB14025 RB15025.4• RB16025.4<br />
3 1 ⁄4" RB14030• RB15030.4 RB16030.4•<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
B11<br />
MISC<br />
PRODUCTS
Wall Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
1<br />
/4"<br />
a<br />
1 5 /8"<br />
2 7 /16"<br />
1 3 /4 "<br />
Made in<br />
Milwaukee<br />
CONNECTORS<br />
3"<br />
WALL MOUNT HANDRAIL BRACKET<br />
• Rotates to any angle.<br />
• Single tapped 3 ⁄8-16 hole.<br />
• <strong>Brackets</strong> are shipped as kits and are not assembled.<br />
a Satin Aluminum Satin Stainless Satin Brass<br />
2 3 ⁄8" MB2251W MB3251W MB4251W<br />
2 7 ⁄8" MB2301W MB3301W MB4301W<br />
ELBOWS<br />
FLANGES<br />
1<br />
/4"<br />
a<br />
1 5 /8"<br />
2 7 /16"<br />
1 3 /4 "<br />
5"<br />
SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
3"<br />
WALL MOUNT HANDRAIL BRACKET<br />
• Rotates to any angle.<br />
• Single tapped 3 ⁄8-16 hole.<br />
• <strong>Brackets</strong> are shipped as kits and are not assembled.<br />
a Satin Aluminum Satin Stainless Satin Brass<br />
2 3 ⁄8" MB2252W MB3252W MB4252W<br />
3 1 ⁄2" MB2302W MB3302W MB4302W<br />
3<br />
/8" Tapped<br />
Hole<br />
1<br />
/4"<br />
b<br />
1<br />
/4" Set<br />
Screw<br />
c<br />
1<br />
/4" Set Screw<br />
1.90"<br />
WALL MOUNT BRACKET – LUMENRAIL ®<br />
With Vertical and Horizontal Adjustment.<br />
Use with Slotted <strong>Handrail</strong> shown on Page J6.<br />
c a b Satin Stainless<br />
2 3 ⁄8" to 3 1 ⁄4" 1" 1 1 ⁄2" to 2" LU3916W<br />
2 3 ⁄8" to 3 1 ⁄4" 1 1 ⁄4" 1 1 ⁄2" to 2" LU3919W<br />
a<br />
3" to 3<br />
1 /4"<br />
2 7 /16"<br />
1 3 /4 "<br />
1<br />
/4"<br />
BIKE<br />
RACKS<br />
1 7 /8"<br />
1<br />
/4" Dia.<br />
Set Screw<br />
3"<br />
3<br />
/8" Tapped<br />
Hole<br />
b<br />
1<br />
/4"<br />
Set Screw<br />
2 7 /16"<br />
1 3 /4 "<br />
MISC<br />
PRODUCTS<br />
WALL MOUNT HANDRAIL BRACKET<br />
Bracket Arm is provided to allow 3" to 3 1 ⁄4" to center of <strong>Handrail</strong>.<br />
Cut as needed for shorter centerline projections.<br />
• Rotates to any angle.<br />
• Single tapped 3 ⁄8-16 hole.<br />
Satin Aluminum Satin Stainless Satin Brass<br />
GB4380 GB4382 GB4384<br />
1<br />
/4"<br />
1<br />
/4" Set<br />
Screw<br />
c<br />
1.90"<br />
WALL MOUNT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
c b Satin Stainless<br />
2 5 ⁄8" to 3 1 ⁄2" 1 1 ⁄2" to 2" WR3900W<br />
B12<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong>
wagner<strong>com</strong>panies.<strong>com</strong><br />
Wall Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
LUMENRAIL ® HANDRAIL BRACKET<br />
• Designed for use with Wagner Slotted <strong>Handrail</strong> sections.<br />
• No welding or special tools.<br />
• Unique Expansion Connector – patent pending – is inserted<br />
into the Slotted <strong>Handrail</strong> slot. Once the two Set Screws are fully<br />
tightened, the Bracket is locked into place.<br />
3 1 /4"<br />
<strong>Handrail</strong><br />
Wireway<br />
1 3 /4"<br />
WALL MOUNT BRACKET – LUMENRAIL Patent Pending<br />
Stainless Steel Bracket Arms are hollow and may be used as an<br />
alternate wireway. Aluminum Bracket Arms are solid. Refer to<br />
Page J1 for more information on these <strong>Brackets</strong> and Lumenrail.<br />
a<br />
Satin Anodized<br />
Satin Aluminum<br />
Aluminum<br />
Satin Stainless<br />
1" LU203 LU203.AN LU201<br />
1 1 ⁄4" LU202 LU202.AN LU200<br />
3 1 /4"<br />
1 3 /4"<br />
Snap-On<br />
Cover Flange<br />
5"<br />
5"<br />
3 1 /4"<br />
a<br />
a<br />
1 3 /4 "<br />
3 1 /4"<br />
1 7 /8"<br />
Snap-On<br />
Cover Flange<br />
1 1 /4"<br />
1<br />
/4" 3"<br />
2 7 /16"<br />
1 3 /4 "<br />
3 1 /4"<br />
WALL MOUNT BRACKET<br />
Matching Wall Bracket with standard mounting Saddle for<br />
non-illuminated railing.<br />
Satin clear anodized finish is AA M32 C22 A21.<br />
Satin Anodized<br />
Satin Aluminum<br />
Aluminum<br />
Satin Stainless<br />
LU207• LU207.AN LU206<br />
• Denotes part shown in photograph.<br />
VERTICAL MOUNT<br />
Useful for elevator cab applications. Adapters sold separately.<br />
Also available without Wall Flange – see Page B14. Satin finish.<br />
Satin Aluminum Satin Stainless Satin Brass<br />
VA150W VS150W VB150W<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
3<br />
/8" Tapped Hole<br />
5 /8" Diam.<br />
3" Diam.<br />
WALL MOUNT BRACKET – LUMENRAIL Patent Pending<br />
Refer to Page J1 for more information on these <strong>Brackets</strong> and<br />
Lumenrail.<br />
a<br />
Satin Stainless<br />
1" LU208<br />
1 1 ⁄4" LU209<br />
SLIP-ON<br />
FITTINGS<br />
Insert into Wagner Slotted <strong>Handrail</strong>.<br />
BIKE<br />
RACKS<br />
Tighten Set Screws to<br />
activate Expansion Connector<br />
locking Bracket into place.<br />
Job: Yale University<br />
Fabrication and Installation: Carrano's Railings, New Haven, Connecticut<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
B13<br />
MISC<br />
PRODUCTS
a15/8"<br />
Post Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
CONNECTORS<br />
ELBOWS<br />
FLANGES<br />
SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
POST MOUNT HANDRAIL BRACKETS<br />
• Square or Rectangular Posts.<br />
• Pipe and Round Tube Posts using Adapters.<br />
• Rotate to any angle.<br />
• Single tapped 3 ⁄8-16 hole.<br />
• <strong>Brackets</strong> are shipped as kits and are not assembled.<br />
Clear Hole for ¼"<br />
Mounting Bolt<br />
Clear Hole for ¼"<br />
Mounting Bolt<br />
a<br />
1 5 /8"<br />
2 7 /16"<br />
1 3 /4 "<br />
1 1 /4 "<br />
a Satin Aluminum Satin Stainless Satin Brass<br />
2 1 ⁄8" MB2251P MB3251P MB4251P<br />
2 5 ⁄8" MB2301P MB3301P• MB4301P<br />
2 7 /16"<br />
1 3 /4 "<br />
1 1 /4 "<br />
a Satin Aluminum Satin Stainless Satin Brass<br />
2 1 ⁄8" MB2252P• MB3252P MB4252P<br />
3 1 ⁄4" MB2302P MB3302P MB4302P<br />
c<br />
c<br />
b<br />
¼" Set<br />
Screw<br />
b<br />
¼" Set Screw<br />
Use AS1904 Adapter for use with 1 1 ⁄2" Pipe Post on Page B22.<br />
POST MOUNT BRACKET – LUMENRAIL ®<br />
With Vertical and Horizontal Adjustment.<br />
Use with Slotted Tubing shown on Page J6.<br />
c a b Satin Stainless<br />
2 3 ⁄8" to 3 1 ⁄4" 1" 1 1 ⁄2" to 2" LU3916P•<br />
2 3 ⁄8" to 3 1 ⁄4" 1 1 ⁄4" 1 1 ⁄2" to 2" LU3919P<br />
1 /4" Set<br />
Screw<br />
2 7 /16"<br />
1¾"<br />
5"<br />
1½"<br />
a<br />
VERTICAL MOUNT HANDRAIL BRACKET<br />
Useful for elevator cab corridor railing applications.<br />
1 1 /2 "<br />
1 1 /4"<br />
3 /8" Mounting Bolt<br />
(by Others)<br />
Inner Sleeve<br />
Outer Sleeve<br />
1 /4" Set Screw<br />
Satin Aluminum Satin Stainless Satin Brass<br />
VA150 VS150 VB150•<br />
• Denotes part shown in photograph.<br />
CAST POST BRACKET<br />
• Mounts to Post with 1 ⁄4" Cap<br />
Screw and Threaded Rivet –<br />
which are provided.<br />
• Rotates to any angle.<br />
• Provides for 1 1 ⁄2" clearance<br />
between <strong>Handrail</strong> and post as<br />
required by ADA and building<br />
codes.<br />
2 1 /2"<br />
c<br />
Clear Hole for<br />
Cap Screw<br />
Threaded Rivet<br />
(provided)<br />
1<br />
/4" Holes<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
C’sunk<br />
for 1 /4"<br />
Screws<br />
1 3<br />
/8"<br />
5 /8"<br />
1 3 /4"<br />
1 9 /16"<br />
2 7 /16"<br />
STYLE C BRACKET 3 ⁄16" FORMED<br />
2"<br />
2 1 /2"<br />
Clear Anodized<br />
Tumbled Mill Finish<br />
c<br />
Aluminum<br />
Aluminum<br />
2 1 ⁄2" IR85KA IR85KM-87<br />
OD<br />
c<br />
Steel<br />
2 1 ⁄2" 3474<br />
3" 3482<br />
Use Style H Adapter to Mount<br />
to Round Posts. See Below.<br />
MISC<br />
PRODUCTS<br />
¼" Set<br />
Screw<br />
1½<br />
POST MOUNT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
Use AS1904 Adapter for use with 1 1 ⁄2" Pipe Post on Page B22.<br />
c b Satin Stainless<br />
2 3 ⁄8" to 3 1 ⁄4" 1 1 ⁄2" to 2" WR3900P<br />
STYLE H ADAPTER<br />
Adapts Style C Bracket for use with<br />
Pipe or Tube.<br />
Pipe Size Pipe OD Steel<br />
1 1 ⁄4" 1.66" 3535•<br />
1 1 ⁄2" 1.90" 3540<br />
2" 2.38" 1902<br />
B14<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong>
wagner<strong>com</strong>panies.<strong>com</strong><br />
Post Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
5 /8"<br />
b<br />
• Adjustable Bracket<br />
• 0 to 38 degree range<br />
ADJUSTABLE POST MOUNT BRACKET<br />
For use with 1 1 ⁄2" Schedule 40 (.140" wall) Stainless Steel Pipe<br />
Posts. Saddle adjusts to stair or ramp angle as needed.<br />
b Pipe Post Size Satin Stainless<br />
1.37" 1 1 ⁄4" Sch. 40 LU328<br />
1.60" 1 1 ⁄2" Sch. 40 LU327<br />
a<br />
5 /8"<br />
1 1 /2"<br />
1 1 /4"<br />
b<br />
1 /4"<br />
2 3 /8"<br />
1 9 /16 "<br />
2 1 /2"<br />
Drill and Thread Post<br />
for 1 /4-20 Set Screw<br />
Drill and Tap Post<br />
for 1 /4-20 Set Screw<br />
• Adjustable Corner Bracket<br />
• 60 to 269 degree range<br />
LUMENRAIL ® ADJUSTABLE CORNER POST BRACKET<br />
a b Pipe Post Size<br />
Satin 304<br />
Stainless<br />
Satin 316<br />
Stainless<br />
Satin<br />
Aluminum<br />
1" 1.37" 1 1 ⁄4" Sch. 40 LU325 LU325.316<br />
1 1 ⁄4" 1.60" 1 1 ⁄2" Sch. 40 LU324<br />
1 1 ⁄4" 1.50" 1 1 ⁄2" Sch. 80 LU324-SC80 LU334<br />
Lumenrail Post Bracket Installation:<br />
1. Dry assemble all <strong>com</strong>ponents to confirm fit and dimensions<br />
prior to final assembly.<br />
2. For Adhesive connection to the Post:<br />
a. Apply Epoxy to the inside wall of the top of the Post.<br />
b. Insert the Post <strong>Brackets</strong> into the Posts.<br />
c. Confirm alignment by setting Slotted <strong>Handrail</strong> into place<br />
before Adhesive sets.<br />
3. For Set Screw connection to the Post:<br />
a. Drill and thread a 1 ⁄4-20 hole, 5 ⁄8" to center from the top of the<br />
Post.<br />
b. Insert the Post Bracket into the Post.<br />
c. Set Top Rail into place to confirm alignment.<br />
d. Use the 1 ⁄4-20 Set Screw – provided – to lock the Post<br />
Bracket into place.<br />
4. Once Top Rail is in place, confirm alignment and tighten the two<br />
Set Screws on the underside of the Expansion Connector.<br />
b<br />
• Adjustable Bracket<br />
1.90"<br />
• 0 to 38 degree range<br />
POST TOP BRACKET<br />
Use With 1.90 OD Posts With a .109" to .140" Wall Thickness.<br />
Vertical and angle are both adjustable.<br />
b<br />
Satin Stainless<br />
2 1 ⁄4" to 4 3 ⁄8" WR31900AA<br />
5 /8"<br />
c<br />
1 /4"<br />
b<br />
b<br />
1 1 /4"<br />
a<br />
2 3 /8"<br />
1 9 /16 "<br />
Drill and Tap Post<br />
for 1 /4-20 Set Screw<br />
LUMENRAIL ADJUSTABLE POST BRACKET<br />
a<br />
5 /8"<br />
1 1 /2"<br />
Satin 304<br />
Stainless<br />
Made in<br />
Milwaukee<br />
Dimensions shown are<br />
for reference only.<br />
Download image file at<br />
shopwagner.<strong>com</strong> to<br />
confirm dimensions prior<br />
to specifying.<br />
• Adjustable Bracket<br />
• 0 to 38 degree range<br />
Satin 316<br />
Stainless<br />
Top Rail<br />
Wireway<br />
Drill and Tap Post<br />
for 1 /4-20 Set Screw<br />
Satin<br />
Aluminum<br />
a b c Pipe Post Size<br />
1" 1.37" 2" 1 1 ⁄4" Sch. 40 LU323 LU323.316<br />
1 1 ⁄4" 1.60" 1 7 ⁄8" 1 1 ⁄2" Sch. 40 LU322 LU322.316<br />
1 1 ⁄4" 1.50" 1 7 ⁄8" 1 1 ⁄2" Sch. 80 LU322-SC80 LU332<br />
LUMENRAIL POST BRACKET<br />
Satin 304 Satin 316 Satin<br />
a b Pipe Post Size Stainless Stainless Aluminum<br />
1" 1.37" 1 1 ⁄4" Sch. 40 LU321 LU321.316<br />
1 1 ⁄4" 1.60" 1 1 ⁄2" Sch. 40 LU320<br />
1 1 ⁄4" 1.50" 1 1 ⁄2" Sch. 80 LU320-SC80 LU330<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
B15
a15/8"<br />
Glass Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
CONNECTORS<br />
GLASS MOUNT BRACKET<br />
In a stairway, guard application – 42" high – codes will<br />
generally require that a <strong>Handrail</strong> be provided at a height of between<br />
34" and 38". With Glass Railing systems – refer to Pages I3 to I21,<br />
these Glass Mounting <strong>Brackets</strong> permit attachment of <strong>Brackets</strong><br />
directly to – or between – tempered glass structural balustrades.<br />
Provide 3 ⁄4" hole for 1 ⁄2" glass; 13 ⁄16" hole for 3 ⁄4" glass. Refer to<br />
table on B17 for minimum hole requirements.<br />
1<br />
/4"<br />
a<br />
1 5 /8"<br />
2 7 /16"<br />
1 3 /4 "<br />
Note: If a hole is to be drilled in the glass, it must be done prior<br />
to tempering. Attempts to drill holes or grind the glass after<br />
tempering will most likely cause breakage.<br />
<strong>Brackets</strong> are shipped as kits and are not assembled.<br />
Stainless Steel <strong>Brackets</strong> use a Disk with Welded Stud. Aluminum<br />
and Brass <strong>Brackets</strong> use Disk with a countersunk hole and Bolt.<br />
See photos on Page B17.<br />
2 7 /16"<br />
1 3 /4 "<br />
Made in<br />
Milwaukee<br />
ELBOWS<br />
FLANGES<br />
5<br />
/8" OD Nylon Spacer<br />
3"<br />
a glass Satin Aluminum Satin Stainless Satin Brass<br />
2 3 ⁄8" 1<br />
⁄2" GB2251 GB3251 GB4251<br />
2 7 ⁄8" 1<br />
⁄2" GB2301 GB3301• GB4301<br />
2 3 ⁄8" 3<br />
⁄4" GB2257 GB3257 GB4257<br />
2 7 ⁄8" 3<br />
⁄4" GB2307 GB3307 GB4307<br />
1<br />
/4"<br />
a<br />
2 7 /16"<br />
1 3 /4 "<br />
5<br />
/8" OD Nylon Spacer<br />
1 1 /4 "<br />
a glass Satin Aluminum Satin Stainless Satin Brass<br />
2 3 ⁄8" 1<br />
⁄2" GB2253 GB3253• GB4253<br />
2 7 ⁄8" 1<br />
⁄2" GB2303 GB3303 GB4303<br />
2 3 ⁄8" 3<br />
⁄4" GB2259 GB3259 GB4259<br />
2 7 ⁄8" 3<br />
⁄4" GB2309 GB3309 GB4309<br />
a<br />
2 7 /16"<br />
1 3 /4 "<br />
SPHERES<br />
CAPS<br />
1 5 /8"<br />
5<br />
/8" OD Nylon Spacer<br />
3"<br />
1 5 /8"<br />
5<br />
/8" OD Nylon Spacer<br />
1 1 /4 "<br />
SLIP-ON<br />
FITTINGS<br />
a glass Satin Aluminum Satin Stainless Satin Brass<br />
2 3 ⁄8" 1<br />
⁄2" GB2252 GB3252• GB4252<br />
3 1 ⁄2" 1<br />
⁄2" GB2302 GB3302 GB4302<br />
2 3 ⁄8" 3<br />
⁄4" GB2258 GB3258 GB4258<br />
3 1 ⁄2" 3<br />
⁄4" GB2308 GB3308 GB4308<br />
a glass Satin Aluminum Satin Stainless Satin Brass<br />
2 1 ⁄8" 1<br />
⁄2" GB2254 GB3254• GB4254<br />
3 1 ⁄4" 1<br />
⁄2" GB2304 GB3304 GB4304<br />
2 1 ⁄8" 3<br />
⁄4" GB2260 GB3260 GB4260<br />
3 1 ⁄4" 3<br />
⁄4" GB2310 GB3310 GB4310<br />
BIKE<br />
RACKS<br />
3" to 3<br />
1 /4"<br />
1<br />
/4"<br />
1 7 /8"<br />
2 7 /16"<br />
1 3 /4 "<br />
2 3 /4" to 3"<br />
1 7 /8"<br />
2 7 /16"<br />
1 3 /4 "<br />
MISC<br />
PRODUCTS<br />
1<br />
/4" Dia.<br />
Set Screw<br />
3"<br />
5<br />
/8" OD Nylon Spacer<br />
Bracket arm is provided to allow 3" to 3 1 ⁄4" to center of <strong>Handrail</strong>. Cut<br />
as needed for shorter centerline projections.<br />
glass Satin Aluminum Satin Stainless Satin Brass<br />
1<br />
⁄2" GB4381 GB4383• GB4385<br />
3<br />
⁄4" GB4371 GB4373 GB4375<br />
1<br />
/4" Dia.<br />
Set Screw<br />
5<br />
/8" OD Nylon Spacer<br />
1.83"<br />
Bracket arm is provided to allow 2 3 ⁄4" to 3" to center of <strong>Handrail</strong>. Cut<br />
as needed for shorter centerline projections.<br />
glass Satin Aluminum Satin Stainless Satin Brass<br />
1<br />
⁄2" GB4386• GB4387 GB4388<br />
3<br />
⁄4" GB4376 GB4377 GB4378<br />
B16<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong>
wagner<strong>com</strong>panies.<strong>com</strong><br />
Glass Mount <strong>Handrail</strong> <strong>Brackets</strong><br />
1<br />
/4"<br />
c<br />
b<br />
1<br />
/4"<br />
Set Screw<br />
5<br />
/8" OD Nylon Spacer<br />
1<br />
/4"<br />
Set Screw<br />
2 7 /16"<br />
HOLE SPECS FOR GLASS<br />
Note: If a hole is to be drilled in the glass, it must be done prior<br />
to tempering. Attempts to drill holes or grind the glass after<br />
tempering will most likely cause breakage.<br />
Per ASTM C 1048, this chart should be used to determine minimum<br />
sizes and placement for tempered and heat strengthened glass. For<br />
Wagner Glass Mount <strong>Brackets</strong>, provide 3 ⁄4" hole for 1 ⁄2" glass; 13 ⁄16"<br />
hole for 3 ⁄4" glass.<br />
For additional information, see Page U7.<br />
Glass thickness 1<br />
⁄2" Glass 3<br />
⁄4" Glass<br />
Minimum diameter of holes 9<br />
⁄16"<br />
13<br />
⁄16"<br />
Edge of hole to edge of glass 1" 1 1 ⁄2"<br />
Distance between rims of holes 1" 1 1 ⁄2"<br />
Distance from corner to rim of holes 3 1 ⁄4" 4 7 ⁄8"<br />
1 3 /4 "<br />
1.90"<br />
For use with 1 ⁄2" or 3 ⁄4" glass.<br />
GLASS MOUNT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
c b Satin Stainless<br />
2 5 ⁄8" to 3 1 ⁄2" 1 1 ⁄2" to 2" GR3900<br />
GLASS MOUNT ADAPTER KIT<br />
Contains 1 Disk with Welded Stud, 2 Gaskets, and 1 Spacer.<br />
Glass Thickness Disk Diameter Satin Stainless<br />
1<br />
⁄2" 3.00" GB4383K<br />
3<br />
⁄4" 3.00" GB4383K.75<br />
1<br />
⁄2" 1.90" GB4387K<br />
3<br />
⁄4" 1.90" GB4387K.75<br />
1<br />
⁄2" 1.25" GB3000K<br />
3<br />
⁄4" 1.25" GB3000K.75<br />
1<br />
/4"<br />
c<br />
b<br />
1<br />
/4" Set<br />
Screw<br />
5<br />
/8" OD Nylon Spacer<br />
1<br />
/4" Set Screw<br />
1.90"<br />
For use with 1 ⁄2" or 3 ⁄4" glass.<br />
GLASS MOUNT BRACKET – LUMENRAIL With Vertical and Horizontal Adjustment.<br />
Use with Slotted Tubing shown on Page J6.<br />
c a b Satin Stainless<br />
2 3 ⁄8" to 3 1 ⁄4" 1" 1 1 ⁄2" to 2" GR3916L<br />
2 3 ⁄8" to 3 1 ⁄4" 1 1 ⁄4" 1 1 ⁄2" to 2" GR3919L<br />
Glass Mount <strong>Brackets</strong> shown above and on Page B16 are<br />
manufactured in Milwaukee. Stainless Steel <strong>Brackets</strong> use a Disk<br />
with a Welded Stud. Aluminum and Brass <strong>Brackets</strong> use Disk with<br />
a countersunk hole and Bolt.<br />
GLASS MOUNT ADAPTER KIT<br />
Contains 1 Disk with countersunk hole, 2 Gaskets, 1 Spacer and<br />
1 Bolt.<br />
Note: A Stainless Steel Bolt is provided with the Aluminum kit.<br />
Glass Thickness Disk Diameter Satin Aluminum Satin Bronze<br />
1<br />
⁄2" 3.00" GB4381K GB4385K<br />
3<br />
⁄4" 3.00" GB4381K.75 GB4385K.75<br />
1<br />
⁄2" 1.90" GB4386K GB4388K<br />
3<br />
⁄4" 1.90" GB4386K.75 GB4388K.75<br />
1<br />
⁄2" 1.25" GB2000K GB4000K<br />
3<br />
⁄4" 1.25" GB2000K.75 GB4000K.75<br />
5"<br />
a<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
2 3 /4"<br />
2 1 /2"<br />
1 3 /4"<br />
2 1 /4"<br />
Note: This Bracket<br />
uses a countersunk<br />
Screw.<br />
3<br />
/16"<br />
2 3<br />
/4"<br />
2 1<br />
/2"<br />
b<br />
Set<br />
Screws<br />
BIKE<br />
RACKS<br />
1 /4"<br />
2 1 /2"<br />
GLASS MOUNT HANDRAIL BRACKET<br />
No structural test data is available for these <strong>Brackets</strong>.<br />
Tube OD<br />
Polished Stainless<br />
1.500" 993<br />
2.000" 993-2<br />
5<br />
/16"<br />
GLASS MOUNT BRACKET – With Vertical Adjustment<br />
Matching Wall and Post Mount <strong>Brackets</strong> are also available.<br />
Sold in Packages of Two.<br />
b<br />
Satin Stainless<br />
1 1 ⁄2" to 2 1 ⁄2" GB333FC<br />
2"<br />
MISC<br />
PRODUCTS<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
B17
Wagner Slip-Fit System<br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
Made in<br />
Milwaukee<br />
ELBOWS<br />
CONNECTORS<br />
FLANGES<br />
Suitable for painting.<br />
Paint provided by others.<br />
I finished 6 of the 7 rooms in<br />
two days, a total of 17 hours x 3 men.<br />
My original estimate was 10 days x 3 men.<br />
Whoever designed Slip-Fit is deserving<br />
of a promotion.<br />
Leon Burgess, Precision Metals<br />
SPHERES<br />
CAPS<br />
Refer to Page G3 for Wall Returns and Rail Ends.<br />
Job: University of Florida, Gainesville, FL<br />
Fabricated and Installed by Precision Metals, Inc., Alachua, FL<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
Slip-Fit Wall Flange<br />
90° Elbow<br />
With Two Tangents<br />
Stock or Custom Wagner Rail<br />
Ends, Wall Returns, Flanges<br />
and pre-cut Pipe, make<br />
assembly<br />
and installation Quick and Easy.<br />
Combine with Lumenrail® Light Sticks and Hardware<br />
to Create LED Lighted <strong>Handrail</strong> Assemblies.<br />
Assemble and Mount Wall<br />
Railing in a Fraction of the Time<br />
Required for a Welded Railing.<br />
Quick Assembly<br />
No Welding<br />
No Unsightly Gaps at<br />
Butt Joints<br />
MISC<br />
PRODUCTS<br />
Slip-Fit<br />
<strong>Handrail</strong> Bracket<br />
Light Fixture<br />
Mounting Clip<br />
LED Light Stick<br />
Backing Pads<br />
Meets the<br />
Graspability<br />
Requirements<br />
of 2010 ADA<br />
B18<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong>
wagner<strong>com</strong>panies.<strong>com</strong><br />
Wagner Slip-Fit <strong>Brackets</strong> for 1.66" OD<br />
SLIP-FIT BRACKET<br />
PATENT PENDING<br />
• Steel 1006 – 1010, Zinc Plated.<br />
• Stainless Steel Type 304, Satin Finish.<br />
• Aluminum 6063, Mill Finish.<br />
• For use with 1 1 ⁄4" Schedule 5, 10 or 40 Pipe (1.66" OD with .062"<br />
to .140" wall thickness).<br />
Note: <strong>Brackets</strong> must be disassembled prior to painting or<br />
anodizing.<br />
• No Welding<br />
• No Unsightly Gapping<br />
at Butt Joints<br />
• Quick and Easy Install<br />
PIPE<br />
OD<br />
t<br />
1. LOOSEN SCREWS until<br />
there is enough room<br />
between strip clamp and<br />
barrel to insert Pipe.<br />
2. INSERT PIPE into each<br />
side of Bracket barrel.<br />
3. TIGHTEN SCREWS<br />
alternating between Screws<br />
until both are tight. Repeat<br />
for other <strong>Brackets</strong>.<br />
• Pre-Cut Pipe for easy shipment.<br />
• Satin and Clear Anodized Pipe are<br />
available on request.<br />
Contact Wagner for special finishes or<br />
paint color options –<br />
modifiedstock@mailwagner.<strong>com</strong><br />
1 1 /2"<br />
3 1 /4"<br />
1.90"<br />
3 1 /8"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
FORMED WALL MOUNT SLIP-FIT BRACKET<br />
Dimensioned to Meet NFPA, ICC, ANSI A117.1 and 2010 ADA.<br />
Zinc Plated Steel<br />
Satin Stainless Steel<br />
1929SF.PL<br />
1952SF<br />
2 1 /2"<br />
2 1 /2"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
FORMED WALL MOUNT SLIP-FIT BRACKET<br />
Zinc Plated Steel<br />
Satin Stainless Steel<br />
1930RSF.PL<br />
1951RSF<br />
4"<br />
3"<br />
4"<br />
3"<br />
Made in<br />
Milwaukee<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
STEEL PIPE Round Black Pipe, A53, Mill Finish<br />
Pipe<br />
Size Sch. OD t<br />
4' Length<br />
Steel<br />
6' Length<br />
Steel<br />
STAINLESS STEEL PIPE Type 304, Satin Finish<br />
Pipe<br />
Size Sch. OD t<br />
6' Length<br />
Stainless<br />
ALUMINUM PIPE Alloy 6063 T6, Mill Finish<br />
Pipe<br />
Size Sch. OD t<br />
4' Length<br />
Aluminum<br />
6' Length<br />
Aluminum<br />
8' Length<br />
Steel<br />
8' Length<br />
Aluminum<br />
18' Length<br />
Stainless<br />
21' Length<br />
Steel<br />
1 1 ⁄4" 10 1.66" .109" P130-4 P130-6 P130-8 P130<br />
1 1 ⁄4" 40 1.66" .140" P135-4 P135-6 P135-8 P135<br />
1 1 ⁄4" 5 1.66" .059" P763.4-6 P763.4<br />
1 1 ⁄4" 10 1.66" .109" P3166104.4-6 P3166104.4<br />
1 1 ⁄4" 40 1.66" .140" P790.4-6 P790.4<br />
20' Length<br />
Aluminum<br />
1 1 ⁄4" 10 1.66" .109" P485-4 P485-6 P485-8 P485<br />
1 1 ⁄4" 40 1.66" .140" P490-4 P490-6 P490-8 P490<br />
EXTRUDED WALL MOUNT SLIP-FIT BRACKET<br />
c<br />
Aluminum<br />
2 1 ⁄2" ER8104SF<br />
3 1 ⁄4" ER8004SF<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
2 1 /2"<br />
1 1 /2"<br />
c<br />
1.90"<br />
Clear Hole for<br />
3 /8" Mounting Bolt<br />
4"<br />
2 5 /8"<br />
1"<br />
1.66"<br />
B19<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS
Slip-Fit <strong>Brackets</strong> for 1 1 ⁄4" Pipe (1.66" OD)<br />
Patent Pending<br />
BRACKETS<br />
Clear Hole for 1 /4 "<br />
Mounting Bolt<br />
b<br />
1<br />
/4" Set Screw<br />
1.66"<br />
Quick Assembly – No Welding<br />
CONNECTORS<br />
1<br />
/4" Set<br />
Screw<br />
c<br />
1<br />
/4" Clamp Screw<br />
1 1 /2"<br />
Use AS1904 Adapter for use with 1 1 ⁄2"<br />
Pipe Post on Page B22.<br />
Loosen Set Screw.<br />
Remove vertical arm and<br />
barrel assembly.<br />
Loosen Bolt to release<br />
clamp.<br />
ELBOWS<br />
POST MOUNT SLIP-FIT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
Use with 1.66" OD <strong>Handrail</strong> only with a wall thickness between<br />
.059" to .140".<br />
b c Satin Stainless<br />
1 1 ⁄2" to 2" 2 3 ⁄8" to 3 1 ⁄4" WR3166SFP<br />
1.90"<br />
4"<br />
Insert Tube.<br />
Tighten Bolt to lock<br />
<strong>Handrail</strong> in place.<br />
Reassemble Bracket and<br />
tighten Set Screw.<br />
FLANGES<br />
1.66"<br />
3<br />
/8" Tapped<br />
Hole<br />
b<br />
1<br />
/4" Set Screw<br />
1.90"<br />
4"<br />
1.66"<br />
1<br />
/4"<br />
1<br />
/4" Set<br />
Screw<br />
c<br />
1<br />
/4" Clamp Screw<br />
1.90"<br />
b<br />
SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
WALL MOUNT SLIP-FIT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
Use with 1.66" OD <strong>Handrail</strong> only with a wall thickness between<br />
.059" to .140".<br />
b c Satin Stainless<br />
1 1 ⁄2" to 2" 2 3 ⁄8" to 3 1 ⁄4" WR3166SFW<br />
1.90"<br />
4"<br />
1.66"<br />
1.90"<br />
POST TOP SLIP-FIT BRACKET<br />
Use With 1.90" OD Posts With a .109" to .140" Wall Thickness.<br />
Use with 1.66" OD <strong>Handrail</strong> only with a wall thickness between<br />
.059" to .140".<br />
b<br />
Satin Stainless<br />
2 1 ⁄4" to 4 3 ⁄8" WR31909SFA<br />
t<br />
1<br />
/4"<br />
b<br />
1<br />
/4" Set Screw<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS<br />
B20<br />
1<br />
/4" Set<br />
Screw<br />
c<br />
5<br />
/8" Nylon Spacer 1<br />
/4" Clamp Screw<br />
For use with 1 ⁄2" or 3 ⁄4" glass.<br />
1.90"<br />
GLASS MOUNT SLIP-FIT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
Use with 1.66" OD <strong>Handrail</strong> only with a wall thickness between<br />
.059" to .140".<br />
b c Satin Stainless<br />
1 1 ⁄2" to 2" 2 3 ⁄8" to 3 1 ⁄4" GR3166SF<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
OD<br />
STAINLESS STEEL PIPE Type 304, Satin Finish<br />
Pipe<br />
Size Sch. OD t<br />
6' Length<br />
Stainless<br />
18' Length<br />
Stainless<br />
1 1 ⁄4" 5 1.66" .059" P763.4-6 P763.4<br />
1 1 ⁄4" 10 1.66" .109" P3166104.4-6 P3166104.4<br />
1 1 ⁄4" 40 1.66" .140" P790.4-6 P790.4
wagner<strong>com</strong>panies.<strong>com</strong><br />
Slip-Fit <strong>Brackets</strong> for 1.66" OD Slotted Tube<br />
3<br />
/8" Tapped<br />
Hole<br />
1<br />
/4"<br />
b<br />
1<br />
/4" Set<br />
Screw<br />
c<br />
1.90"<br />
1<br />
/4" Set Screw<br />
1<br />
/4" Clamp Screw<br />
4"<br />
1.90"<br />
WALL MOUNT SLIP-FIT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
Use with 1.66" Slotted Tubing.<br />
b c Satin Stainless<br />
1 1 ⁄2" to 2" 2 3 ⁄8" to 3 1 ⁄4" LU3166SFW<br />
1<br />
/4"<br />
b<br />
1<br />
/4" Set<br />
Screw<br />
c<br />
1.90"<br />
1<br />
/4" Set Screw<br />
4"<br />
1.90"<br />
5<br />
/8" OD Nylon Spacer 1<br />
/4" Clamp Screw<br />
For use with 1 ⁄2" or 3 ⁄4" glass.<br />
GLASS MOUNT SLIP-FIT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
Use with 1.66" Slotted Tubing.<br />
b c Satin Stainless<br />
1 1 ⁄2" to 2" 2 3 ⁄8" to 3 1 ⁄4" GR3166SFL<br />
Clear Hole for 1 /4 "<br />
Mounting Bolt<br />
b<br />
.059"<br />
c<br />
1.90"<br />
1.90"<br />
b<br />
1<br />
/4" Set<br />
Screw<br />
1<br />
/4" Set Screw<br />
1<br />
/4" Clamp Screw<br />
4"<br />
POST TOP SLIP-FIT BRACKET<br />
Use With 1.90" OD Posts With a .109" to .140" Wall Thickness.<br />
Use with 1.66" Slotted Tubing.<br />
b<br />
Satin Stainless<br />
2 1 ⁄4" to 4 3 ⁄8" LU31909SFA<br />
1 1 /2"<br />
Use AS1904 Adapter for use with 1 1 ⁄2" Pipe Post.<br />
POST MOUNT SLIP-FIT BRACKET<br />
With Vertical and Horizontal Adjustment.<br />
Use with 1.66" Slotted Tubing.<br />
b c Satin Stainless<br />
1 1 ⁄2" to 2" 2 3 ⁄8" to 3 1 ⁄4" LU3166SFP<br />
1.66"<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
3<br />
/4"<br />
a<br />
STAINLESS STEEL SLOTTED HANDRAIL<br />
Type 304 or Type 316, Satin Finish.<br />
These Stainless Steel sections have no visible seam.<br />
For use with glass, Lumenrail® Light Sticks, or Wagnerail<br />
Panels.<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
b<br />
6' Length<br />
Satin Stainless<br />
18' Length<br />
Satin Stainless<br />
Alloy a b<br />
Type 304 1.66" 1" GR3166.4-6 GR3166.4<br />
Type 316 1.66" 1" GR3168.4-6 GR3168.4<br />
B21<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS
Machined Bracket Components and Fasteners<br />
shopwagner.<strong>com</strong><br />
BRACKETS<br />
CONNECTORS<br />
ADAPTER<br />
Permits the Vertical Mount Bracket and Post Bracket to be used<br />
with Pipe and Tubing. Satin finish.<br />
1 1 /2"<br />
Hole For OD Aluminum Stainless Brass<br />
7<br />
⁄16" 1.500" AA1507 AS1507 AB1507<br />
7<br />
⁄16" 1.660" AS1607<br />
9<br />
⁄32" 1.900" AA1904<br />
7<br />
⁄16" 1.900" AA1907 AS1907 AB1907<br />
7<br />
⁄16" 2.000" AA2007 AS2007 AB2007<br />
BRACKET WALL FILLER<br />
These optional Fillers are for plaster walls or wall board to prevent<br />
overtightening of matching <strong>Handrail</strong> Bracket which may result in<br />
cracking the drywall.<br />
Available with one clear center hole for 3 ⁄8" Mounting Bolt , or one<br />
center hole and three tapped clear holes for 1 ⁄4" Mounting Bolts.<br />
These Fillers are used with Style B and 1 ⁄4" Formed <strong>Handrail</strong><br />
<strong>Brackets</strong> shown on Pages B2–B4. Use Plated Steel Fillers with<br />
Aluminum and Bronze <strong>Brackets</strong> – call for availability.<br />
h<br />
2 5 /8"<br />
Clear Hole for<br />
3<br />
/8" Mounting Bolt<br />
STYLE A FILLER<br />
For use with one hole Bracket.<br />
h<br />
Steel<br />
5<br />
⁄8" 3525B<br />
7<br />
⁄8" 3525<br />
Mounting Bolt not included.<br />
ELBOWS<br />
FLANGES<br />
2 5 /8"<br />
h<br />
Threaded<br />
Holes<br />
for 1<br />
/4-20<br />
Mounting<br />
Screws<br />
Clear Hole for<br />
3<br />
/8" Mounting Bolt<br />
STYLE B FILLER<br />
For use with three hole<br />
Bracket.<br />
h<br />
Steel<br />
5<br />
⁄8" 4579B<br />
7<br />
⁄8" 4579•<br />
Includes three 1 ⁄4" × 3 ⁄8" Round<br />
Head Screws.<br />
MISC<br />
PRODUCTS<br />
SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
ANCHOR PLATE<br />
3 1 /4"<br />
3 /16"<br />
1<br />
/4-20<br />
Tapped Hole<br />
For use with Style U <strong>Brackets</strong> only. Six tapped holes and 7 ⁄16"<br />
center hole with 1 ⁄4" Round Head Bolts.<br />
Center Hole<br />
Steel<br />
7<br />
⁄16" B1416<br />
FILLER<br />
For use with one hole or three hole<br />
Style U <strong>Brackets</strong> only.<br />
Center Hole Steel For Use In<br />
7<br />
⁄16" 1721 Plaster<br />
7<br />
⁄16" 1722 Drywall<br />
3 1 /4"<br />
13 /16"<br />
1721 Filler has one 7 ⁄16" diameter center hole, and three untapped<br />
holes. For use with 5 ⁄8" drywall.<br />
1722 Filler has one 7 ⁄16" diameter center hole, and three tapped<br />
holes with matching 1 ⁄4" × 3 ⁄8" Round Head Screws. For use with 5 ⁄8"<br />
drywall.<br />
1 /8"<br />
B22<br />
Typical Anchor Plate Use<br />
Typical Filler Use<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong>
wagner<strong>com</strong>panies.<strong>com</strong><br />
Typical <strong>Handrail</strong> Bracket Attachments<br />
TYPICAL HANDRAIL BRACKET ATTACHMENTS<br />
Due to structural requirements for <strong>Handrail</strong> <strong>Brackets</strong> – as noted<br />
below – proper attachment is critical to assure safety. There are<br />
other methods of attachment.<br />
Cast Bracket with Tapped Hole Formed Bracket with Three Holes Machined Bracket with Tapped Hole<br />
Hanger Bolt<br />
with Lag Screw<br />
Expansion Shield<br />
Machine Screws<br />
bolted to Filler<br />
Hanger Bolt<br />
with Lag Screw<br />
Expansion Shield<br />
Cast Bracket with One Hole Extruded Bracket with One Hole Cast Bracket with Tapped Hole<br />
Through Bolt<br />
with Backing<br />
Plate<br />
Typical Assembly and Glass Mounting Details<br />
1 /4" Set Screw<br />
Button<br />
Head Bolt<br />
Screw<br />
Saddle<br />
Glass<br />
Screw<br />
Saddle<br />
1 /4" Set Screw<br />
Glass<br />
Screw<br />
Saddle<br />
Gasket<br />
Glass<br />
Gasket<br />
Gasket<br />
Nylon Spacer<br />
Nylon Spacer<br />
Stud Welded<br />
Backing Disk<br />
Nylon Spacer<br />
Lag Screw into<br />
wood stud or<br />
blocking<br />
Countersunk<br />
Backing Disk With<br />
Mounting Screw<br />
Stud Welded<br />
Backing Disk<br />
Check with your Fastener supplier regarding Epoxy Anchors and<br />
Anchors for hollow block.<br />
In hollow wall applications, <strong>Handrail</strong> <strong>Brackets</strong> must be fastened to<br />
wood studs or appropriate blocking must be provided for structural<br />
attachment.<br />
Hanger Bolt<br />
into wood stud or<br />
blocking<br />
BUILDING CODE ISSUES<br />
Check with your local code authorities prior to specifying any<br />
railing system. The following are the most <strong>com</strong>mon requirements in<br />
<strong>com</strong>mercial and residential applications:<br />
• <strong>Handrail</strong> is required on stairs and ramps.<br />
• Height: 34 to 38 inches above stair nosings and ramp surfaces.<br />
• Load Requirements:<br />
• 50 lbs/ft uniform load or<br />
• 200 lbs. concentrated load<br />
• Clearance:<br />
• Between wall and <strong>Handrail</strong>: 1 1 ⁄2" minimum<br />
• Exceptions:<br />
• NFPA 101: 2 1 ⁄4" minimum<br />
• 1991 ADAAG: 1 1 ⁄2" between the wall and <strong>Handrail</strong><br />
(Updated to 1 1 ⁄2" minimum for 2010 ADASAD)<br />
• Between underside of <strong>Handrail</strong> and horizontal Bracket Arm:<br />
• 1 1 ⁄2" minimum<br />
• Exceptions:<br />
• For each 1 ⁄2" of additional <strong>Handrail</strong> perimeter dimension<br />
above 4", the vertical clearance dimension of 1 1 ⁄2" shall<br />
be reduced by 1 ⁄4".<br />
Subtract From Clearance From<br />
Railing Diameter Perimeter Underside of Railing Underside of Railing<br />
1.25" 3.92" 0 1 1 ⁄2"<br />
1.50" 4.71" - 1 ⁄8" 1 3 ⁄8"<br />
1.66" 5.21" - 1 ⁄4" 1 1 ⁄4"<br />
1.90" 5.97" - 1 ⁄2" 1"<br />
2.00" 6.28" - 1 ⁄2" 1"<br />
Refer to Page U8 for other code related information.<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
MISC<br />
PRODUCTS<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
B23
wagner<strong>com</strong>panies.<strong>com</strong><br />
Fasteners<br />
HEX HEAD LAG SCREW<br />
For attachment of <strong>Brackets</strong> with one clear hole to wood.<br />
Use with Lag Screw Expansion Shield for attachment to<br />
concrete.<br />
Cadmium Plated<br />
Steel Aluminum Stainless Bronze<br />
3<br />
⁄8" × 2" 9503 9504• 9504-2 9504-3<br />
PHILLIPS FLAT HEAD, COUNTERSUNK SCREW<br />
Zinc Plated Steel Aluminum Stainless<br />
1<br />
⁄4"-20 × 1 ⁄2" 9505• 9506<br />
#10-32 × 5 ⁄8" 9547-2<br />
MACHINE SCREW, COUNTERSUNK<br />
Stainless<br />
1<br />
⁄4-20 × 1 ⁄2" 9546<br />
ROUND HEAD SCREW<br />
Zinc Plated Steel<br />
1<br />
⁄4" × 3 ⁄8" 9501<br />
TEK PAN HEAD SCREW<br />
• Denotes part shown in photograph.<br />
HANGER BOLT<br />
For attachment of <strong>Brackets</strong> with one clear hole to wood. Use with<br />
Lag Screw Expansion Shield for attachment to concrete.<br />
Zinc Plated Steel<br />
3<br />
⁄8-16 × 3" 9508<br />
LAG SCREW EXPANSION SHIELD<br />
Use with Lag Screw or Hanger Bolt for attachment into concrete.<br />
3<br />
⁄8" × 1 3 ⁄4" R1151<br />
Plunger<br />
Tips<br />
BRACKETS CONNECTORS ELBOWS FLANGES SPHERES<br />
CAPS<br />
Zinc Plated Steel<br />
#10 × 5 ⁄8" 9547<br />
3M SCOTCH-WELD EPOXY<br />
Applicator Gun with Plunger,<br />
1 50ml Epoxy and 2 Tips<br />
EPX100<br />
1 50ml Epoxy Cartridge Refill and 2 Tips EPX100R<br />
Plunger<br />
EPX100P<br />
SLIP-ON<br />
FITTINGS<br />
BIKE<br />
RACKS<br />
LIDO-WELD ADHESIVE AND PRIMER<br />
A single <strong>com</strong>ponent, structural Adhesive which<br />
can be used to lock Bracket threads in place.<br />
Primer is re<strong>com</strong>mended with Stainless Steel<br />
<strong>com</strong>ponents for the purpose of speeding up cure<br />
time. Not for use with Aluminum.<br />
Adhesive 1.10 Ounces 14664<br />
Primer 0.88 Ounces 14666<br />
MISC<br />
PRODUCTS<br />
Wagner • ISO 9001:2008 • T 888 243 6914 • P 414 214 0444 • F 414 214 0450 • wagner<strong>com</strong>panies.<strong>com</strong><br />
B27