Catalina Owner's Manual - Chris Craft

Systems
Tilting the Engine Up
Ensure all people are clear of the engine(s) when securing the
engine in the tilted up position. Keep all body parts away from moving
components to prevent serious injury.
To tilt the engine up:
1. Ensure the remote control lever is in the NEUTRAL position.
2. Press the power trim switch to UP position and hold until the motor has tilted up completely. Then release the
power trim switch.
3. Secure the engine in the tilted up position by adjusting the tilt support lever, located on the engine, so that it supports
the weight of the engine.
If your engine model is equipped with trim rods, refer to the engine Owner’s Manual for additional information
when securing the engine.
Tilting the Engine Down
Ensure all people are clear of the engine(s) when putting the engine
in the down position. Keep all body parts away from moving components
to prevent serious injury.
To place the engine in the down position:
1. Ensure the remote control lever is in the NEUTRAL position.
2. Press the power trim switch to the UP position so that the tilt support lever becomes free. Adjust the tilt support
lever, located on the engine, so that the engine can move down.
3. Press the power trim switch DOWN position to lower the engine to the desired position.
Chris-Craft 3–11