SCC 2500C - Sany

SANY CRAWLER CRANE SCC2500C
H OPERATION CONDITION LOAD CHARTS
FIXED JIB OPERATION CONDITION
SCC2500C Boom Load Chart (without extension boom, but
including standard counterweight and additional counterweight)
Radius (m)
Boom length (m)
88.5 91.5
Radius (m)
12 12
14 14
16 17.2/34.4 17.2/34.4 17.7/33.1 17.7/33.1 16
18 33.4 33.4 30.9 30.8 18
20 32.2 32.2 29.9 29.9 20
22 30.1 30.1 28.3 28.3 22
24 28.9 28.9 27.1 27.1 24
26 27.7 27.7 25.1 25.1 26
28 24.5 26.0 24.8 24.8 28
30 22.1 22.5 22.9 22.9 30
32 20.1 21.4 19.5 20.0 32
34 18.2 18.5 17.6 18.1 34
36 16.5 16.8 15.9 16.4 36
38 15.0 15.3 14.5 14.9 38
40 13.6 13.9 13.1 13.5 40
42 12.3 12.7 11.9 12.3 42
44 11.2 11.6 10.8 11.2 44
46 10.1 10.5 9.8 10.1 46
48 9.1 9.5 8.8 9.2 48
50 8.2 8.6 7.9 8.3 50
52 7.4 7.8 7.1 7.5 52
54 6.7 7.0 6.4 6.7 54
56 6.0 6.3 5.7 6.0 56
58 5.3 5.6 5.1 5.4 58
60 4.8 5.0 4.5 4.7 60
62 4.2 4.5 3.9 4.2 62
64 3.7 4.0 3.4 3.7 64
66 3.2 3.5 2.9 3.1 66
68 2.7 3.0 2.4 2.7 68
70 2.4 2.6 70
Unit:(t)
Counterweight (m) 85.2 85.2+5.8 85.2 85.2+5.8 Counterweight (m)
Notes: The 40% orange and italic parts in the table indicate the rated loads with additional counterweight, the values of 25% orange and italic parts depend
Description:
on the boom strength.
1. The actual lifting capacity is the rated lifting capacity minus the weight of lifting hook, wire rope and all lifting appliances.
2. The rated lifting capacity shown in the table is the value when the weight is hoisted slowly and stably on a level and hard ground without
traveling.
Jib length
Insert
Boom length
Included angle between
(m)
3 m 6 m
(m)
boom and jib
13 1 - 28.5~76.5 10°,30°
19 1 1 28.5~76.5 10°,30°
25 1 2 28.5~76.5 10°,30°
31 1 3 28.5~76.5 10°,30°
Jib tip (5m)
Jib insert 6m (3)
30°
Jib insert 3m (1)
Jib base (5m)
Angle between boom and jib(10°30°)
Boom (28.5m-76.5m)
Fixed jib combination (13m, 19m, 25m, and 31m)
30 31