STANLEY HYDRAULIC TOOLS - Euromat

More documents

Recommendations

Info

IW16 UNDERWATER IMPACT WRENCH VERHUUR - VERKOOP - SERVICE LOCATION - VENTE - SERVICE IW1635001 HYDRAULISCHE SLAGMOERSLEUTEL 1" SPECIFICATIONS Capacity Torque Flow Range Working Pressure Full Relief Setting Weight Length W idth Hydraulic Ports Connect Size and Type Couplers Hose Whips 1" Square Drive 500 -2500 ft lbs / 680-3400 Nm 7-12 gpm / 26-45 lpm 1500-2000 psi / 105-140 bar 2250 psi / 155 bar 26 lbs / 12 kg 15" / 38 cm 4.5" / 11 cm -8 SAE O-ring 3 ⁄8" Male Pipe Adapter Yes No (See Accessories) The Stanley IW16 is a heavy duty 1” square drive impact wrench designed for the toughest underwater bolting applications. Powered by a Stanley integral Hyrevz motor, the IW16 has a durable swing hammer impact mechanism with adjustable impact intensity from 500 to 2500ft lbs (680 to 3400 Nm) of torque. Designed to run from a wide range of hydraulic circuits. “D” style grip handle with multi-position assist handle and hi-visibility yellow paint is standard. Order numbers IW1635001 Impact Wrench, underwater, CE IW1615001 Impact Wrench, no underwater use, CE Accessories 06830 Whip Hose 18” (46cm) FEATURES • Integral Stanley Hyrevz gear motor produces high torque • Stainless Steel spools and fasteners • Forward-Reverse with variable speed • "D" style grip handle with inside trigger • Feathering on/off trigger for precise control • Adjustable impact intensity • 2500 ft lbs/3400 Nm of maximum impact torque • Durable swing hammer mechanism • Cast-in lifting eye 8
DL07 UNDERWATER DRILL VERHUUR - VERKOOP - SERVICE LOCATION - VENTE - SERVICE The Stanley DL07 hydraulic drill is a forward/reverse, variable speed drill with a 1/2” keyed chuck for underwater drilling applications. The DL07 has more than enough torque to drill most steel, masonry, wood or coral. A two position assist handle and trigger guard are standard. See chart below for speeds at select gpm of hydraulic flow. Painted hi-visibility yellow. DL0765201 HYDRAULISCHE BOORMACHINE 12mm FEATURES • Integral Stanley Hyrevz gear motor produces high torque • Stainless Steel spools and fasteners • Forward-Reverse with variable speed • Dual position assist handle provides increased control • Oversized trigger with guard for operator comfort • Wiper seals on reversing and trigger spool • Built in reverse check valve ensures long seal life • Plastisol handle for comfortable ergonomicgrip • Forward position of handle provides betterbalance • Open Center/Closed Center-Dual SpoolFeature • Cast-in lifting eye DL07 Speed/Hydraulic Flow 350 rpm @ 3 gpm / 11.3 lpm 475 rpm @ 4 gpm / 15 lpm 750 rpm @ 6 gpm / 23 lpm 1000 rpm @ 8 gpm / 30 lpm 1250 rpm @ 10 gpm / 38 lpm SPECIFICATIONS Chuck Capacity Performance Flow Range Working Pressure Full Relief Setting Weight Length Hydraulic Ports Couplers Hose Whips ½" / 12 mm See Table at Right 3-10 gpm / 11.3-38 lpm 1000-2000 psi / 70-140 bar 2250 psi / 155 bar 7.8 lbs / 3.5 kg 10½" / 26.7 cm - 8 SAE O-ring No (See Accessories) Yes ( 3 ⁄8" NPT Male Thread) DL07 Torque at PSI/Bar 4 ft lbs @ 500 psi 0.5 Nm @ 35 bar 9 ft lbs @ 1000 psi 1.2 Nm @ 70 bar 14 ft lbs @ 1500 psi 1.9 Nm @ 105 bar 19 ft lbs @ 2000 psi 2.6 Nm @ 140 bar Order numbers DL0765201 Drill, underwater, CE DL0755001 Drill, no underwater use, CE Accessories 03971 Flush Face Coupling Set 3/8” NPT 9
Page 1: VERHUUR - VERKOOP - SERVICE LOCATIO
Page 5 and 6: GR29 UNDERWATER GRINDER VERHUUR - V
Page 7 and 8: CS11 UNDERWATER UNDERWATER CHAIN SA
Page 9: IW12 UNDERWATER IMPACT WRENCH VERHU
Page 13 and 14: TP08 UNDERWATER TRASH PUMP VERHUUR
Page 15 and 16: DS06 DIAMOND CHAIN SAW VERHUUR - VE
Page 17 and 18: DS12 UTILITY CHAIN SAW VERHUUR - VE
Page 20: Euromat Antwerpen Merksemsebaan 210

STANLEY HYDRAULIC TOOLS - Euromat

Create successful ePaper yourself

Delete template?

Save as template?