STANLEY HYDRAULIC TOOLS - Euromat

VERHUUR - VERKOOP - SERVICE 

LOCATION - VENTE - SERVICE 

STANLEY HYDRAULIC TOOLS

INHOUDS- 

OPGAVE 

INHOUDS- 



SUMMARY 

INHOUDSOPGAVE 

PAG 

HYDRAULIC GRINDER GR29 3 

HYDRAULISCHE SLIJPMOLEN GR29 - 230MM 

HYDRAULIC DIAMOND CHAIN SAW DS11 - CONCRETE 4 

HYDRAULISCHE KETTINGZAAG DS11 - BETON 

HYDRAULIC CHAIN SAW CS11 - WOOD 5 

HYDRAULISCHE KETTINGZAAG CS11 - HOUT 

HYDRAULIC IMPACT DRILL ID07 - 1/2” 6 

HYDRAULISCHE SLAGMOERSLEUTEL ID07 - 1/2” 

HYDRAULIC IMPACT WRENCH IW12 - 3/4” 7 

HYDRAULISCHE SLAGMOERSLEUTEL IW12 - 3/4” 

HYDRAULIC IMPACT WRENCH IW16 - 1” 8 

HYDRAULISCHE SLAGMOERSLEUTEL IW16 - 1” 

HYDRAULIC DRILL DL07 - 1/2” 9 

HYDRAULISCHE BOORMACHINE DL07 - 12MM 

HYDRAULIC HAMMER DRILL HD45 10 

HYDRAULISCHE BOORHAMER HD45 

HYDRAULIC TRASH PUMP TP08 - 4“ 11 

HYDRAULISCHE VUILWATERPOMP TP08 - 4” 

HYDRAULIC DIAMOND CHAIN SAW DS06 12 

HYDRAULISCHE KETTINGZAAG DS06 - BETON & STEEN 

HYDRAULIC CHAIN SAW DS12 - DUCTILE IRON, PVC AND HDPE PIPE 14 

HYDRAULISCHE KETTINGZAAG DS12 - BUIZEN GIETIJZER, PVC EN HDPE 

HYDRAULIC HAMMER DRILL HD08 - SDS PLUS 16 

HYDRAULISCHE BOORHAMER HD08 - SDS PLUS 

WWW.EUROMAT.BE

GR29 

UNDERWATER 

GRINDER 



GR2930101 

HYDRAULISCHE SLIJPMOLEN 230mm 

SPECIFICATIONS 

Capacity 

Spindle 

Circuit Type 

Flow Range 

Working Pressure 

Full Relief Setting 

RPM 

Weight 

(with guard) 

Length 

Width 

(with guard) 

Hydraulic Ports 

Connection 

Size and Type 

Couplers 

Hose Whips 

9" / 23 cm Wheel 

5 

⁄8" – 11 Threaded 

Open Center 

4-12 gpm / 15-45 lpm 

1000-2500 psi / 

70-175 bar 

2250 psi / 155 bar 

3200 @ 12 gpm / 

45 lpm 

15 lbs / 6.8 kg 

11" / 28 cm 

10¼" / 26 cm 

-8 SAE O-ring 

3 

⁄8" Male Pipe Adapter 

Yes 

No (See Accessories) 

The Stanley Hydraulic GR29 Grinder is a right angle grinder 

(”vertical grinder”) that can be used for grinding and 

cleaning in underwater applications with a variety of 

wheels, brushes and attachments. The high torque gear 

motor drives a standard 5/8 - 11 threaded spindle. A 9” 

(23cm) adjustable wheel guard, two position assist handle 

and trigger guard are standard. Painted hi-visibility yellow. 

Order numbers 

GR2930101 Grinder, underwater, couplers, CE 

GR3070101 Grinder, no underwater use, couplers, CE 

Accessories 

06830 Whip hose 18”/46cm 

02587 Grinding Wheel For Metal 9”/23cm 

FEATURES 

• Integral Stanley Hyrevz gear motor produces 

high torque 

• Stainless Steel spools and fasteners 

• Two position assist handle for right/left hand 

operation 

• Oversized trigger with guard for diver comfort 

• Adjustable wheel guard for infinite positions 

• Plastisol covered handle for comfortable 

ergonomic grip 

• Use with grinding wheels, hull scrubbing 

brushes, wire and nylon brushes, barnacle 

busters and Desmond wheels 

• 3200 rpm @ 12 gpm / 45 lpm 

• Cast-in lifting eye 

3

DS11 

UNDERWATER 

UNDERWATER 

DIAMOND 

CHAIN SAW 



DS115000 

HYDRAULISCHE KETTINGZAAG BETON 

The DS11 Diamond Chain Saw is specifically designed to cut solid concrete underwater. Cuts square 

corners without over-cut and can plunge cut sea walls up to 18” thick. Two available bar lenghts 

(15” and 18”) and two different chains depending on the amount of rebar and hardness of the concrete. 

A minimum of 20 PSI water pressure is required at the saw for cooling and lubrication of the bar and 

chain. Painted hi-vsibility yellow. 

FEATURES 

• Direct drive motor - no chain coast when trigger 

is released 

• Integral Stanley Hyrevz gear motor for durability 

and power 

• Trigger activated water to bar and chain for lubrication 

• Multi position trigger handle and Wall Walker reduces 

diver fatigue 

• Heavy duty cast aluminum 

• Cut steel reinforced concrete with Pinnacle chain 

• Stainless Steel spool and fasteners 

• Interlocking safety trigger and hand guard 

• Pinnacle Chain: For Steel Reinforced, Heavy Aggregate 

Concrete 

• Ultra Chain - For Light Wire Mesh, Soft/Green Concrete 

• Order bar and chain separately 

Order numbers (without bar & chain) 

DS115000 Diamond chain saw, underwater, CE 

DS113000 Diamond chain saw, no underwater use, CE 

SPECI FICATIONS 

Capacity 

Chain Type 

Circuit Type 

Flow Range 



Weight 

(less bar & chain) 

Length 

(with bar & chain) 

W idth 

Couplers 

Hose Whips 

Lubrication/Cooling 

15 or 18" / 

38 or 45 cm Bar 

Diamond Impregnated Chain 

Segments 

Open Center 

7-9 gpm / 26-34 lpm 

1000-2000 psi / 70-140 bar 

2250 psi / 155 bar 

28 lbs / 12.7 kg 

37 or 40" / 99 or 101.6 cm 

9" / 23 cm 

Yes 

Yes 

Internal Water Channels in Bar 

Parts 

20470 Drive Sprocket 

4 

Accessories 

30305 Bar for Chain Saw 38cm 


56801 Diamond Chain 38cm ultra 32 

56802 Diamond Chain 45cm ultra 37 

56803 Diamond Chain 38cm Pinnacle 32 

58632 Diamond Chain 45cm Pinnacle 37 

23517 Sprocket Wrench

CS11 

UNDERWATER 

UNDERWATER 

CHAIN SAW 



CS113NO001 

HYDRAULISCHE KETTINGZAAG HOUT 

The CS11 is an extremely duty hydraulic powered chain saw for cutting all types of wood structures 

underwater - including bridge pilings, pier and dock timbers. It’s robust design and high torque gear 

motor provides divers instant chain speed to cut trough the toughest timbers with ease. The power 

to weight ratio is significantly higher than any other wood cutting chain saw and is available with 

bar lengths up to 36” (91cm). Painted hi-visibility yellow. 

FEATURES 

• Integral Stanley Hyrevz gear motor produces high torque 

• Direct drive motor – no chain coast when trigger is 

released 

• Stainless Steel spool and fasteners 

• Interlocking safety trigger and hand guard 

• Large assist handle 

• Manual chain oiler 

• Adjustable automatic chain oiler 

• Bucking cleat 

• Wide flow range 

• Order bar and chain separately 

Order numbers (without bar & chain) 

CS113NO001 Chain saw, underwater, CE 

Accessories 




01824 Chain Saw 61cm 



Parts 



Cut Capacity 

Chain Type 

Circuit Type 

Flow Range 

Optimum Flow 



Motor speed @ 12gpm 

Chain speed @ 12gpm 

Weight (less bar/chain) 

Length (less bar/chain) 

Width 


Couplers 

Hose Whips 

24, 30 & 36" / 61, 76 & 91 cm 

3 

⁄8" Pitch 

Open Center 

10-14 gpm / 38-53 lpm 

14 gpm / 53 lpm 

1500-2000 psi / 105-140 bar 

2250 psi / 155 bar 

5295 rpm 

2591' per min / 

13,16 meters per sec 

17 lbs / 7.7 kg 

17" / 43 cm 

9" / 23 cm 

-8 SAE O-ring 

Yes 

Yes 

5

ID07 

UNDERWATER 

IMPACT DRILL 



GR2930101 

ID0792001 


Capacity 

Performance 

Flow Range 



Weight 

Lenght 

Width 


Connect Type 

and Type 

Couplers 

Hose Whips 

½" / 12.7 mm 

Square Drive 

Torque 500 ft lbs / 

675 Nm 

4-12 gpm / 15-45 lpm 

750-2000 psi / 

50-140 bar 

2250 psi / 155 bar 

7.2 lbs / 3.3 kg 

10" / 25.4 cm 

4¼" / 10.8 cm 

-8 SAE O-ring 

3 


No 

No 

HYDRAULISCHE SLAGMOERSLEUTEL 1/2" 

The Stanley ID07 Impact/Drill is two hydraulic 

underwatertools in one - an impact wrench and a wood 

drill. The 1/2” square drive impact wrench delivers torque 

up to 500ft lbs and can tighten and loosen nuts and bolts 

and drive lag screws. Use the ID07 with the 05079 Adapter 

and wood borings bits for drilling in timbers up to 

1 1/16” diameter holes with no reactive torque to the diver. 

Trigger guard and hi-visibility yellow paint is standard. 

Order numbers 

ID0792001 Impact Drill 1/2”, underwater, CE 

ID0782001 Impact Drill 1/2”, no underwater use, CE 

FEATURES 

• Integral Stanley Hyrevz gear motor 

produces high torque 


• Forward-Reverse with variable speed 

• 500 ft lbs/675 Nm of impact torque 

• Oversized trigger with guard for 

operator comfort 

• Wiper seals on reversing and trigger spool 

• Built in reverse check valve ensures long 

seal life 

• Plastisol handle for comfortable 


• Forward position of handle provides better 

balance 

• Open Center/Closed Center-Dual 

Spool Feature 


6

IW12 

UNDERWATER 

IMPACT WRENCH 



IW1234001 


Capacity 

Torque 

Flow Range 



Weight 

Length 

Width 


Connect Size 

and Type 

Couplers 

Hose Whips 

¾" / 19 mm 

Square Drive 

250 -1200 ft lbs / 

340-1632 Nm 

4-12 gpm / 15-45 lpm 

1000-2000 psi / 

70-140 bar 

2250 psi / 155 bar 

14 lbs / 6.4 kg 

11¼" / 28.6 cm 

4" / 10.2 cm 

-8 SAE O-ring 

3 


Yes 


HYDRAULISCHE SLAGMOERSLEUTEL 3/4" 

The Stanley IW12 is a medium duty 3/4” square drive 

impact wrench designed for underwater bolting and 

drilling applications. Powered by a Stanley integral Hyrevz 

motor, the IW12 has a durable swing hammer impact 

mechanism with adjustable impact intensity from 

250 to 1200ft lbs (340 to 1632 Nm) of torque. Designed to 

run from a wide range of hydraulic circuits, this wrench 

allows underwater bolting in the most extreme applications. 

Trigger guard and hi-visibility yellow paint is standard. 

Order numbers 

IW1234001 Impact Wrench, underwater, CE 

IW1214001 Impact Wrench, no underwater use, CE 

Accessories 

06830 Whip Hose 18” (46cm) 

FEATURES 





• Pistol grip style handle 

• Adjustable impact intensity 

• 1200 ft lbs/1632 Nm of maximum impact 

torque 

• Oversized trigger with guard for 

operator comfort 



• Durable swing hammer mechanism 


7

IW16 

UNDERWATER 

IMPACT WRENCH 



IW1635001 

HYDRAULISCHE SLAGMOERSLEUTEL 1" 


Capacity 

Torque 

Flow Range 



Weight 

Length 

W idth 


Connect Size 

and Type 

Couplers 

Hose Whips 

1" Square Drive 

500 -2500 ft lbs / 

680-3400 Nm 

7-12 gpm / 26-45 lpm 

1500-2000 psi / 

105-140 bar 

2250 psi / 155 bar 

26 lbs / 12 kg 

15" / 38 cm 

4.5" / 11 cm 

-8 SAE O-ring 

3 


Yes 


The Stanley IW16 is a heavy duty 1” square drive impact 

wrench designed for the toughest underwater bolting 

applications. Powered by a Stanley integral Hyrevz 

motor, the IW16 has a durable swing hammer impact 

mechanism with adjustable impact intensity from 500 

to 2500ft lbs (680 to 3400 Nm) of torque. Designed to 

run from a wide range of hydraulic circuits. “D” style grip 

handle with multi-position assist handle and hi-visibility 

yellow paint is standard. 

Order numbers 

IW1635001 Impact Wrench, underwater, CE 

IW1615001 Impact Wrench, no underwater use, CE 

Accessories 

06830 Whip Hose 18” (46cm) 

FEATURES 





• "D" style grip handle with inside trigger 

• Feathering on/off trigger for precise 

control 

• Adjustable impact intensity 

• 2500 ft lbs/3400 Nm of maximum impact 

torque 

• Durable swing hammer mechanism 


8

DL07 

UNDERWATER 

DRILL 



The Stanley DL07 hydraulic drill is a forward/reverse, variable 

speed drill with a 1/2” keyed chuck for underwater drilling 

applications. The DL07 has more than enough torque to drill 

most steel, masonry, wood or coral. A two position assist 

handle and trigger guard are standard. See chart below for 

speeds at select gpm of hydraulic flow. Painted hi-visibility 

yellow. 

DL0765201 

HYDRAULISCHE BOORMACHINE 12mm 

FEATURES 

• Integral Stanley Hyrevz gear motor produces high torque 



• Dual position assist handle provides increased control 

• Oversized trigger with guard for operator comfort 

• Wiper seals on reversing and trigger spool 

• Built in reverse check valve ensures long seal life 


ergonomicgrip 

• Forward position of handle provides 

betterbalance 

• Open Center/Closed Center-Dual 

SpoolFeature 


DL07 Speed/Hydraulic Flow 

350 rpm @ 3 gpm / 11.3 lpm 

475 rpm @ 4 gpm / 15 lpm 

750 rpm @ 6 gpm / 23 lpm 

1000 rpm @ 8 gpm / 30 lpm 

1250 rpm @ 10 gpm / 38 lpm 


Chuck Capacity 

Performance 

Flow Range 



Weight 

Length 


Couplers 

Hose Whips 

½" / 12 mm 

See Table at Right 

3-10 gpm / 11.3-38 lpm 

1000-2000 psi / 70-140 bar 

2250 psi / 155 bar 

7.8 lbs / 3.5 kg 

10½" / 26.7 cm 

- 8 SAE O-ring 


Yes ( 3 ⁄8" NPT Male Thread) 

DL07 Torque at PSI/Bar 

4 ft lbs @ 500 psi 0.5 Nm @ 35 bar 




Order numbers 

DL0765201 Drill, underwater, CE 

DL0755001 Drill, no underwater use, CE 

Accessories 

03971 Flush Face Coupling Set 3/8” NPT 

9

HD45 

UNDERWATER 

HAMMER DRILL 



The Stanley Hydraulic 

HD45 Hammer Drill is a 

heavy duty underwater 

model designed for 

drilling in concrete, 

rock and masonry. 

10 

HD4531001 

HYDRAULISCHE BOORHAMER 

The feathering on/off valve and adjustable rotation speed 

allows easy drill bit start-up and precise control. The high 

torque rotation motor drives standard 736 Skil hex carbide 

tipped drill bits and is capable of drilling a 2” diameter hole 

up to 29” deep. Fluted drill bits require no water or air to 

clear holes. Ideal for drilling holes for setting anchor bolts. 

Painted hi-visibility yellow. 

Order numbers 

HD4531001 Hammer Drill, underwater, CE 

HD4511001 Hammer Drill, no underwater use, CE 

Accessories 

30279 Adapter For Percussion Core Bit 

27902 Percussion Core Bit 63 mm 

27904 Percussion Core Bit 75 mm 


Chuck Capacity 

Up to 2" diameter or 

4" core bit 

Steel Capacity 736 Skil hex 

Circuit Type Open Center 

Flow Range 7-9 gpm / 26-34 lpm 

Optimum Flow 8 gpm / 30 lpm 


1500-2000 psi / 

105-140 bar 

Full Relief Setting 2250 psi / 155 bar 

Rotation Speed 0 - 300 rpm 

Weight 

(less tool bit) 

49 lbs / 22.2 kg 

Length 

24½" / 62.2 cm 

Width 

(at handles) 

14" / 35 cm 

Hydraulic Ports -8 SAE O-ring 

Couplers 

Yes 

Hose Whips 

Yes 

FEATURE 

• T-Handle with large on/off trigger for 

precise control 


• Forward-Reverse with adjustable bit 

rotation speed 

• Feathering on/off valve allows easy start 

and control 

• Uses 736 Skil fluted carbide tipped drill 

bits - requires no water/air to clear holes 

• Drills ¾" to 2" diameter holes up to 29" 

deep and core drills up to 4" in diameter 

• Operates in any position 

• Trouble free drill steel latch retainer 

Accessories 

02280 Carbide Bit 19 mm 





02283 Carbide Bit 50 mm

TP08 

UNDERWATER 

TRASH PUMP 



ITEM 

Capacity 

Weight 


U.S.A. 

800 gpm 

59 lbs 

METRIC 

3,028 lpm 

26.7 kg 

Height (over handle) 16.5 in. 42 cm 

Length 

Width 

19 in. 

15 in. 

48.3 cm 

38.1 cm 

TP08013 

HYDRAULISCHE 

VUILWATERPOMP 4" 

Pressure 2,000 psi 140 bar 

Flow Range 7-9 gpm 26-34 lpm 

Maximum Flow 

9 gpm 

34 lpm 

Porting 

#10 SAE (Press.) #12 SAE (Ret) 

Connect Size and Type 

Discharge Diameter 

1/2 in. Male Pipe (Press.) 3/4 in. Male Pipe (Ret) 

4 in. Camlock 

Inlet Diameter 

4 in. 

100 mm 

The Stanley TP08Trash Pump is a lightweight, 

heavy duty pump capable of 

pumping high volumes of water, sand 

slurries, gravel, sludge and solids up to 3 

in./75 mm in diameter. The TP08 is 

submersible, self priming and can run dry 

without damage to the motor, bearings 

or impeller. 

The TP08 has been designed to get the 

most from an HTMA Type II hydraulic 

circuit. Using only 9 gpm/34 lpm of 

hydraulic flow, the TP08 will pump over 

800 gpm/3,028 lpm at a 10 ft/2.54 m 

head. The free-flow impeller and 4 in./ 

100 mm inlet and outlet combine to make 

the TP08one of the most efficient pumps 

in the business. 

Weighing only 59 lbs/27 kg and with its 

convenient handle, the TP08can easily be 

handled by one operator. The TP08 and 

the Stanley HP1 Compact Power Unit 

make a powerful, portable team for high 

volume de-watering and trash pump 

applications. 

The heavy-duty construction of the TP08 

features a fabricated, all steel volute and 

abrasion resistant cast iron impeller. The 

volute uses replaceable UHMW polyethylene 

wear plates to reduce wear and 

extend pump life. The heavy-duty 

Stanley HYREVZ hydraulic motor is 

self-lubricating. 

Routine maintenance for the TP08is easy. 

The top cover is attached to the volute 

with six wing nuts so cleaning and 

inspection can be accomplished in just a 

few minutes. 

Order numbers 

TP08013 Trash Pump, CE 

Accessories 

65624 Discharge Hose 4”, 7,5 meter, Camlock 

11

DS06 

DIAMOND 

CHAIN SAW 




DS06200001 

HYDRAULISCHE 

KETTINGZAAG 

BETON & STEEN 

ITEM 

U.S.A. 

METRIC 

CAPACITY 13 in. Bar 33 cm Bar 

PERFORMANCE 

Concrete and Masonry Cutting 

FLOW RANGE 7 - 9 gpm 26 - 34 lpm 

PRESSURE 2000 psi 140 bar 

PORTS 

WEIGHT 

(with bar, chain and couplers) 13.7 lbs 

-8 SAE O-Ring 

6.2 kg 

LENGTH (with bar and chain) 24 in. 61 cm 

WIDTH 

9 in. 

22.9 cm 

BAR HEIGHT (with Chain) 3 in. 7.6 cm 

CONNECTION Yes 

HOSE WHIPS 

Yes 

LUBRICATION/COOLING 

Internal Water Channels in Bar 

WATER PRESSURE REQ’D 20 psi min. 1.4 bar min. 

Features and Benefits 

The Stanley DS06 Concrete 

Chainsaw is a lightweight and 

compact diamond chain saw 

ideal for cutting concrete, reinforced 

concrete, concrete block, 

concrete conduits, brick and 

other masonry. The combination 

of power, lightweight and ease of 

use makes the DS06 ideal for 

construction, remodeling, maintenance, 

water and sewer projects. 

The DS06 has plenty of power to 

cut through 13 inches of reinforced 

concrete without stalling. 

Its design makes straight cuts 

easy even in confined areas and 

hard to reach applications. 

12 

It can plunge cut up to 13-inches 

(33cm) for quick cutting of window, 

door, conduit and duct openings in 

walls and notching of concrete 

pipe. It has an effective cutting depth 

of 11,5-inches (29 cm) for a full-width 

square corner cut. 

Water for lubrication and cooling is 

ported trough the bar and aplied at 

the point where the concrete is being 

cut. The trigger activated cooling and 

lubrication reduces diamond segment,

DS06 

DIAMOND 

CHAIN SAW 



Pinnacle Saw Chain Segment 

5 

Ultra Saw Chain Segment 

The newest generation of diamond chains with a breakthrough 

in diamond chain technology dramatically reduces 

the chain wear of cutting concrete. SealPro technology 

extends chain chassis life by up to 50% or more, simplifies 

water pressure requirements and reduces the frequency of 

chain tensioning adjustments on concrete chainsaws. 

SealPro technology incorporates a patented new chain 

chassis design that seals out the abrasive contaminants 

present in the concrete cutting environment. A unique 0-ring 

design seals the rivet-joints of the chain, keeping the abrasive 

materials out and the lubrication in. 

Diamond chains with SealPro work at much lower water 

pressures than non-sealed diamond chains, completely 

eliminating the need for water booster pumps. The new 

chains can be used with water from an ordinary garden hose 

and will yield excellent chain life at pressures as low as 20 

psi. No booster pump means simpler setup, reduced time on 

the job and less water to clean up afterwards. 

Other important advantages of SealPro technology result 

from the reduced chain stretch that occurs as the user gets 

full value from the most expensive component of the cutting 

system...the diamonds. It also means fewer tensioning 

adjustments over time. 

The chart below will help you select the correct chain type for 

the balance of cutting performance and chain life that best 

meets the specific needs of each cutting application. 

Sealpro is a registered Trademark of ICS Blount Inc. 

Water flow of 3-5gpm is recommended for the 

diamond chain saw 

Aggregate Extra Hard Hard Medium 

Soft 

Abrasive 

Material 

Chert Basalt Granite Marble Sandstone Masonry, Brick, 

Flint Quartz River Rock Limestone 

Block, Green Concrete 

Approximate Moh’s Scale 9 8 7 6 5 4 3 

Reinforcing Steel 

Lots of Steel 

Some Steel 

No Steel 

1” Double Mat Single Mat #5 #4 #3 Wire Mesh 

Saw Chain Wear (in.-ft.) 

Pinnacle-25 100 in-ft 300-500 in-ft 

1200 in-ft 

Ultra-25 

125 in-ft 

200 in-ft 

600 in-ft 

Order numbers 

DS06200001 Diamond Chain Saw, Standard 20 lpm, CE 

DS06300001 Diamond Chain Saw, Standard 30 lpm, CE 

Parts 


Accessories 

35037 Bar for Chain Saw 33 cm 

56799 Diamond Chain 33 cm Ultra 25 

56800 Diamond Chain 33 cm Pinnacle 25 

33429 Sprocket Wrench 

13

DS12 

UTILITY 

CHAIN SAW 



DS1231801 

PERFORMANCE 

* Cuts through 12” ductile iron pipe in 

under 4 minutes 

* Cuts free hand or with pipe clamp 

* 10” cut capacity when using pipe 

clamp with 18” bar 

* Any size pipe can be cut free hand 

* Wet cut system-requires a minimum 

2 gpm (8 lpm) of water flow @ 20 psi (3 bar) 

* Compatible with HTMA Type II 

Hydraulic Systems 

PRODUCT BENEFITS 

* Improved Operator Safety 

* Reduced Excavation 

* Reduced Labor Time 

HYDRAULISCHE KETTINGZAAG 

GIETIJZER, PVC EN HPDE-BUIZEN 

Stanley’s New Utility Chain Saw is a revolutionary cutting 

method designed to change the way the job gets done. 

From ductile iron to plastic pipe, this chain saw will get you 

in and out of the job faster, easier and safer than other methods. 

Utilizing a brazed layer diamond coating on a durable chain 

chassis, this technology provides improved access with far less 

excavation in a confined space such as cutting water main 

pipe in a ditch. 

Utility Chain Saw Cuts 

Ductile Iron Pipe 

PVC Pipe 

Copper Pipe 

Cast Iron Pipe 

HDPE Pipe 

* Reduced Operator Effort 

* Easy Control While Cutting 

* Single Side Access 

* Quiet and exhaust free hydraulic power 

* Reduces rotational inertia associated 

with abrasive blade cut-off saws 

* Operates in wet environment 

i.e. flooded ditch 

Pipe Clamp Accessory 

(sold separately) 

71055 

The pipe clamp accessory brings a whole new level of safety, 

accuracy and ease of use to the jobsite. Mount the clamp to 

the pipe and install the saw to the clamp. This rigid structure 

reduces the effort of handling the saw, while providing a solid, 

stable cutting platform that also improves operator safety and 

precision of the cut. Pipe clamp fits 4” to 12” diameter pipe. 

14

DS12 

UTILITY 

CHAIN SAW 



HYDRAULISCHE KETTINGZAAG 

GIETIJZER, PVC EN HPDE-BUIZEN 

Order numbers (with bar, with chain saw 45 cm) 

DS1231801 Chain Saw, standard, CE 

Accessories 

71055 Pipe Clamp Assembly (4”-12“) 10-30 cm 

23057 Sprocket Wrench 

Parts 

71047 Bar for Chain Saw 45 cm 

71048 Chain Saw 45 cm 


15

HD08 

HAMMER DRILL 




ITEM U.S.A. METRIC 

Rotation Speed at 6 gpm 

Blows per Minute 

1175 rpm 

4,500 at 6 gpm 

Weight 6 lb 2.7 kg 

Length 13.8 in 35 cm 

Height 5.5 in 14 cm 

Pressure 750-2000 psi 50-114 bar 

Flow Range 3-9 gpm 11-34 lpm 

HYDRAULISCHE 

BOORHAMER 

SDS PLUS 

Optimum Flow 6 gpm 22.8 lpm 

Porting 

8 SAE O-Ring 

Motor 

Integral 

Bit Type 

SDS Plus 

Features and Benefits 

The Stanley HD08 hammer drill is ideal for just about any drilling job whether in rock, concrete, 

masonry, wood or metal. 

The powerful, high rate, hammer function makes it easy to drill in rock, concrete, masonry and 

other like materials. For drilling in materials such as wood and metal, the hammer function 

can be turned off. 

The sturdy, light-weight construction of the HD08 features a D-handle and assist handle that 

make it easier to maneuver than a pistol-grip tool. And, the power-to-weight- ratio of the HD08 

brings even the toughest jobs down to size. 

The HD08 comes standard with a chuck that accepts SDS Plus bits. A geared drill chuck 

and adapter are available for use with common wood auger bits or twist drills. 

A depth gauge attachment is standard. 

16 

Order numbers 

HD0853101 Hammer Drill, standard, CE 

Accessories (order together) 

16769 Geared Drill Chuck 

16770 Chuck Adapter

Euromat Antwerpen 

Merksemsebaan 210 

2110 Wijnegem 

Euromat Brussel 

Budasteenweg 31b 

1830 Machelen 

Euromat Gent 

Wittewalle 2 

9041 Oostakker 

Euromat Sud 

141 Rue de Namur 

6041 Gosselies 

T 03/326 24 00 

F 03/326 36 86 

wijnegem@euromat.be 

T 02/252 45 20 

F 02/252 48 50 

brussel@euromat.be 

T 09/251 79 79 

F 02/251 78 77 

gent@euromat.be 

T 071/34 16 15 

F 071/34 16 38 

gosselies@euromat.be 

www.euromat.be

STANLEY HYDRAULIC TOOLS - Euromat

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?