STANLEY HYDRAULIC TOOLS - Euromat

DS06
DIAMOND
CHAIN SAW
VERHUUR - VERKOOP - SERVICE
LOCATION - VENTE - SERVICE
SPECIFICATIONS
DS06200001
HYDRAULISCHE
KETTINGZAAG
BETON & STEEN
ITEM
U.S.A.
METRIC
CAPACITY 13 in. Bar 33 cm Bar
PERFORMANCE
Concrete and Masonry Cutting
FLOW RANGE 7 - 9 gpm 26 - 34 lpm
PRESSURE 2000 psi 140 bar
PORTS
WEIGHT
(with bar, chain and couplers) 13.7 lbs
-8 SAE O-Ring
6.2 kg
LENGTH (with bar and chain) 24 in. 61 cm
WIDTH
9 in.
22.9 cm
BAR HEIGHT (with Chain) 3 in. 7.6 cm
CONNECTION Yes
HOSE WHIPS
Yes
LUBRICATION/COOLING
Internal Water Channels in Bar
WATER PRESSURE REQ’D 20 psi min. 1.4 bar min.
Features and Benefits
The Stanley DS06 Concrete
Chainsaw is a lightweight and
compact diamond chain saw
ideal for cutting concrete, reinforced
concrete, concrete block,
concrete conduits, brick and
other masonry. The combination
of power, lightweight and ease of
use makes the DS06 ideal for
construction, remodeling, maintenance,
water and sewer projects.
The DS06 has plenty of power to
cut through 13 inches of reinforced
concrete without stalling.
Its design makes straight cuts
easy even in confined areas and
hard to reach applications.
12
It can plunge cut up to 13-inches
(33cm) for quick cutting of window,
door, conduit and duct openings in
walls and notching of concrete
pipe. It has an effective cutting depth
of 11,5-inches (29 cm) for a full-width
square corner cut.
Water for lubrication and cooling is
ported trough the bar and aplied at
the point where the concrete is being
cut. The trigger activated cooling and
lubrication reduces diamond segment,