Download the Full PDF Catalog - Schlueter Dairy Technologies

MilkpumpsReceiversFiltersandWashers
STAINLESS STEEL STANDARD
FLOOR RECEIVER PACKAGEs
Exploded Parts View
Optional
Pump Head
Description part #
1 Cover with 1-1/2” hole for 14” or 18” receivers 48707
Cover without hole for 14” or 18” receivers 487071
Cover for 26” receiver with 1-1/2” hole 48796-1
2 Cover gasket for 14” or 18” (6-3/8” ID x 7-7/8” OD) 11314
Cover gasket for 26” receiver (8-1/2” ID x 9-1/2” OD) 48681
3a STRAIGHT MILK AND VACUUM INLETS
1-1/2” inlet without ferrule (3” stub) 48711
2” inlet without ferrule (3” stub) 48712
2-1/2” inlet without ferrule (3” stub) 48705
3” inlet without ferrule (3” stub) 48706
4” inlet without ferrule (3” stub) 48706-1
1-1/2” inlet with TC ferrule (3” long) 48717
2” inlet with TC ferrule (3” long) 48718
2-1/2” inlet with TC ferrule (3” long) 48719
3” inlet with TC ferrule (3” long) 48720
4” inlet with TC ferrule (3” long) 48720-1
3b 45˚ MILK INLET TO REPLACE TANGENTIAL INLET
2” 45˚ inlet without ferrule 48735
2-1/2” 45˚ inlet without ferrule 48736
3” 45˚ inlet without ferrule 48737
2” 45˚ inlet with TC ferrule 48739
2-1/2” 45˚ inlet with TC ferrule 48740
3” 45˚ inlet with TC ferrule 48741
4” 45˚ inlet with TC ferrule 48741-1
5 MOISTURE TRAP U BENDS
2” 180˚ ferruled and threaded 48726
2-1/2” 180˚ ferruled and threaded 48727
3” 180˚ ferruled and threaded 48728
6 MOISTURE TRAPS
2” x 2” 12 qt. S.S. trap 48731
3” x 3” 12 qt. S.S. trap 48733
Bail only for 12 qt. trap 48679
2” x 2” cover only for 12 qt. trap 48683
3” x 3” cover only for 12 qt. trap 48685
Gasket for 12 qt. trap cover (8-1/2” ID x 9-1/2” OD) 48681
Standard ball for 12 qt. 3” x 3” trap (4-1/4”) 48677
Standard ball for 2” x 2” trap (3-1/2”) 45762
12 qt. S.S. pot only 48678
Duck-bill drain 42695
Description Part #
1-1/2” x 3” long str. adapter NPT thread to clamp 48754-1
2” x 3” long straight adapter NPT thread to clamp 48754
2” x 8” long straight adapter NPT thread to clamp 48752
3” x 3” long straight adapter NPT thread to clamp 48746
3” x 8” long straight adapter NPT thread to clamp 48745
6a BALL RETAINER FOR 6 OR 12 QT. MOISTURE TRAP
2” NPT Cage for 3-1/2” O.D. Ball 48773
3” NPT Cage for 4-1/4” O.D. Ball 48774
7 LIQUID LEVEL CONTROL
3 probe liquid level control complete 1-1/2” plug 48680
Liquid control box complete less probe assembly 48680-1
2” electrode assembly, tri-clamp 45769-1
1-1/2” electrode assembly, plug style 45769-2
Long electrodes (2 required) 45770
Short electrode (1 required) 45771
2” x 3 hole electrode block, tri-clamp 45774
1-1/2” x 3 hole electrode block, plug style 45775
8b 3/4 HP pump and motor, horizontal discharge 48756
1 HP pump and motor, horizontal discharge 48757
1-1/2 HP pump and motor, horizontal discharge 48758
Classic milk pump vertical discharge (tri-clamp) 48762
Classic milk pump horizontal discharge (tri-clamp) 48763
9a 14” S.S. panel frame without legs or bracket 48699
18” S.S. panel frame without legs or bracket 48701
26” S.S. panel frame without legs or bracket 48799
9b 18” Wall bracket complete for large receiver 48700
9c Stainless Steel adjustable legs (Set of 3) 48704
10 Vacuum operated drain valve shut-off 45282
11 1-1/2” quick opening clamp 44870
1-1/2” Hycar gasket 45193
A complete parts list for the old-style glass receiver group is
available in the “Forms and Diagrams” section in the back of
the catalog. Many parts for the old-style glass receivers are still
available as they interchange with many of the stainless steel
receiver parts. Look closely at the parts shown for the parts you
might need. If you need any hard to find glass receiver parts call
the sales department for pricing and availability.
Janesville, WI 800.359.1700 • Fresno, CA 800.359.1702 • York, PA 800.359.1701 schlueterco.com 34