MecLab® Technology for secondary schools - Festo

Festo Didactic
MecLab ®
Control options
1
2
3
4
5
1 The control package
EasyPort Mini with power supply
unit and connecting cables
The control package contains everything
you need for controlling
MecLab ® :
EasyPort Mini
––
6 digital input and output channels
––
Maximum current per output
channel 0.7 A, 24 V
––
Digital input switching threshold
12 V
––
Power supply 24 V DC ±10 %,
3 VA power consumption
––
Status LED to indicate the operating
status
––
USB interface to connect to a PC
via mini USB socket
––
Including USB connecting cable
––
Short circuit proof
Power supply unit
––
24 V DC output voltage
––
output current max. 1.88 A
––
supply voltage 100 – 240 V, 1.5 A,
50 – 60 Hz
––
Short circuit proof
Order no. 549787
Necessary accessories
Power cable ➔ Page 7
2 LOGO! Trainer Package 24 V
FluidSIM ® contains a software-based
minicontroller, e.g. as an introduction
to the LOGO!, the minicontroller
from SIEMENS. We offer an attractively
priced set of 5 LOGO! modules.
For industrial colleges and training
centres.
Package includes:
––
Set of 5 LOGO! 12/24RC
––
Programming software LOGO! Soft
Comfort
––
1 USB programming cable
Order no. 556235
Set of 4 LOGO! USB PC cables
(without illustration)
Order no. 556237
3 Connecting cable
Connecting cable with 15-pin sub-D
connector and free cable ends.
––
For connecting a Logo! to the multipin
plug distributor of a MecLab ®
station.
––
Connecting cable for the end-position
controller SPC 11 with 4 mm
safety plugs.
Order no. 177673
4 FC 100 EduTrainer ®
The FC 100 mini control system combines
three functions in one unit:
––
Convenient handheld control unit
At the push of a button, up to 8
digital inputs and outputs can be
set and deleted. The status of the
outputs and of up to 8 digital inputs
is conveniently shown on the
display.
––
Simple programming via
„teach-in“
In recording mode, the FC 100 records
the user‘s set and delete
commands and saves the relevant
entry screen as a step enabling
condition. Thus, a PLC program can
be created simply and played back
again and again.
––
CodeSys compatible PLC
The FC 100 is also a fully-fledged
PLC with 8 digital inputs, 8 digital
outputs and an Ethernet interface.
The user can create his own PLC
programs in accordance with IEC
61131 or with C++ and run them
on the FC 100 over the serial interface
and the supplied CodeSys
software. The FC 100 is powerful
enough to control an MPS ® Station,
for example. Operation is carried
out via the FC 100‘s display.
Includes CD ROM with operating instructions
and CodeSys demo. Limited
to 2 hours operating time, restart
required thereafter.
Order no. 548676
Connecting cable SysLink – Sub-D
(without illustration)
Cable for connection MecLab ® stations
with sub-assemblies that have
a 24-pin SysLink plug.
Order no. 560752
5 Training program LOGO! Training
This training program provides an
introduction to logic functions. First
of all, AND & OR functions and their
processing are shown in function tables.
Other basic control functions
such as memory, timer and counter
functions round off the contents. The
second part starts by covering the
basics of open-and closed-loop control
circuits and describes the elements
of a controller. It then takes
a detailed look at minicontrollers
with their features and areas of application.
From the contents:
––
Basic technical functions (AND &
OR function, memory function,
timer function, counter function)
––
Digital minicontrollers (differentiation
between open- and closedloop
control)
––
Control components
––
Positioning with digital minicontrollers
––
Design and function of a minicontroller
––
Cyclical programme processing
––
Areas of application
––
Programming languages
Training time: approx. 2 hours
E.g. single licence on CD-ROM,
with online activation DE/EN/ES/FR
Order no. 540941
with network licence connector
DE/EN/ES/FR
Order no. 540943
6
www.festo-didactic.com