DEMA Industrial Prod. Cat. '07 - Pumps & Pressure Inc.
DEMA Industrial Prod. Cat. '07 - Pumps & Pressure Inc.
DEMA Industrial Prod. Cat. '07 - Pumps & Pressure Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SOLENOID VALVES - FLOAT VALVES - STRAINERS - PUMPS - INJECTORS<br />
<strong>Industrial</strong> <strong>Prod</strong>ucts<br />
<strong>Cat</strong>alog<br />
<strong>DEMA</strong><br />
R<br />
<strong>DEMA</strong> Engineering Company<br />
10020 Big Bend Boulevard - St. Louis, Missouri 63122<br />
Telephone: 800-325-3362 - Fax: 314-965-8319<br />
Web Site: www.demaeng.com
History<br />
The roots of <strong>DEMA</strong> Engineering<br />
date back to 1940, when brothers Bela and<br />
Herman Deutsch joined together to manufacture<br />
industrial controls and accessories.<br />
Sixteen years later, after receiving several inquiries from<br />
chemical manufacturers for dispensing equipment, the<br />
team capitalized on the industry’s demand for quality<br />
chemical dispensing equipment. With an initial product<br />
line consisting of two proportioners, a dispensing pump<br />
and a few spray guns, the brothers formed <strong>DEMA</strong><br />
Engineering Company.<br />
Five decades later, <strong>DEMA</strong> has become a world leader<br />
in both the chemical dispensing and fluid control<br />
industries. The company has over 400 employees<br />
working at five manufacturing facilities worldwide,<br />
including locations in Australia, the Netherlands, and<br />
three in the St. Louis, Missouri area. <strong>DEMA</strong> now<br />
manufacturers solenoid valves, chemical injectors,<br />
liquid level proportioning controls, inline strainers<br />
and a variety of other fluid dispensing systems.<br />
<strong>DEMA</strong>’s product components are<br />
manufactured on state-of-the-art<br />
equipment, including computer<br />
controlled machining and turning<br />
centers and injection molding<br />
machines. They are then<br />
assembled and tested in a<br />
modern dedicated assembly<br />
facility. This facility has been<br />
expanded to serve the car wash,<br />
agriculture, beverage dispensing,<br />
reverse osmosis, misting, whirlpool, high pressure<br />
cleaning and dish and laundry machine industries<br />
worldwide. <strong>DEMA</strong> continues to introduce new products<br />
to meet the demands of an ever changing market.<br />
Despite <strong>DEMA</strong>’s success and growth, it is still a family<br />
owned and operated business. Its current leadership<br />
is the third generation of the Deutsch family active<br />
in the company, and is continuing the tradition of<br />
innovation and quality into the 21st century.<br />
The <strong>DEMA</strong> Mission:<br />
To expand our heritage as designers and manufacturers<br />
of high quality dispensing and fluid control products by<br />
being the most innovative company in our industry,<br />
providing quality products with unique features that<br />
meet or exceed the need of our global customers, and<br />
doing so in a timely manner at a competitive price.
TABLE of CONTENTS<br />
PAGE<br />
2 Valve Index<br />
4 Normally Closed - Direct Acting Valves<br />
401P, 492S, 492SM<br />
Normally Closed - Pilot Piston Valves<br />
412P, A413P, A414P, A416P, A418P<br />
5 Normally Closed - Diaphragm Valves<br />
473P, 474P, 476P, 476PS<br />
Normally Closed - High <strong>Pressure</strong> Valves<br />
453P, 453S, 454P, 458P, 458PS<br />
6 Direct Acting Single Station and Manifold Valves<br />
491S, 492S, 492SM, 491M, 492M, 492MSS Series<br />
7 Normally Closed - Mini Diaphragm Valves<br />
442P, 443P, 443PFB, P442, P443, PP442, PP443, P462, P463, P462F, P463F,<br />
463PS, 463PS-D, 463PSJ, 464PS, 464PS-D, 464PSJ<br />
8 Normally Open Valves<br />
Diaphragm<br />
O473P, O474P, O476P<br />
High <strong>Pressure</strong><br />
O453P, O453S<br />
Normally Open - Mini Diaphragm Valves<br />
O442P, O443P, OP442, OP443<br />
9 Normally Open - Mini Diaphragm Valves<br />
OPP442, OPP443, O463PS, O464PS<br />
Normally Closed - Special Purpose Valves<br />
P404J, 466P<br />
10 Normally Closed - Direct Acting for Corrosive Liquids<br />
481P, 481-2, 482-2<br />
Coil Options<br />
11 Electrical Specifications<br />
Valve Repair Kits<br />
12 Y-Type Line Strainers<br />
13 Float Valves<br />
440 and 437 Series<br />
14 Injectors<br />
15 C Series Injectors<br />
16 C Series Injector Selection Table<br />
17 B Series Injectors<br />
Special Injectors for Corrosive Applications<br />
P203C, 203BS-2, 204BS-2<br />
Multiple Injectors<br />
203B2V2, 204B2V2, 206B2V2,<br />
High <strong>Pressure</strong> Foam<br />
295CS-2<br />
18 MixRite Proportioning Pump<br />
19 MixRite Accessories, Parts Kits<br />
20 MixRite Specialty Applications<br />
21 Glossary<br />
Metric Conversion Chart<br />
1
SOLENOID VALVES<br />
Valve<br />
Model<br />
Number<br />
Action<br />
max<br />
psi<br />
<strong>Pressure</strong> Differential<br />
min<br />
psi<br />
max<br />
bar<br />
min<br />
bar<br />
Body<br />
Material<br />
Orifice Dia.<br />
<strong>Inc</strong>hes<br />
Pipe<br />
Size<br />
N.P.T.<br />
CV Flow<br />
Factor #<br />
GPM @ 60 psi<br />
(cv # x sq.<br />
root psi)<br />
Liters/M@<br />
4.08 bar<br />
Page<br />
Number<br />
Standard Duty<br />
401P Direct 150 0 10.2 0 BRASS 7/64 .109 1/4 0.27 2.09 7.92 4<br />
412P Pilot-Piston 150 1 10.2 0.068 BRASS 9/32 .281 3/8 1.20 9.30 35.20 4<br />
A413P Pilot-Piston 150 3 10.2 0.204 BRASS 5/16 .313 3/8 2.00 15.50 58.67 4<br />
A414P Pilot-Piston 150 3 10.2 0.204 BRASS 7/16 .438 1/2 3.10 24.03 90.93 4<br />
A416P Pilot-Piston 150 3 10.2 0.204 BRASS 19/32 .593 3/4 5.00 38.75 146.67 4<br />
A418P Pilot-Piston 150 3 10.2 0.204 BRASS 3/4 .750 1 8.00 62.00 234.67 4<br />
Mini ValvesNormally Closed<br />
442P Diaphragm 125 3 8.5 0.204 BRASS 1/4 .250 1/4 1.00 7.75 29.33 7<br />
443P Diaphragm 125 3 8.5 0.204 BRASS 1/4 .250 3/8 1.00 7.75 29.33 7<br />
443PFB Dia/flow disc 125 3 8.5 0.204 BRASS 1/4 .250 3/8 disc .1.06 or 2.38 gpm 7<br />
P442 Diaphragm 125 3 8.5 0.204 CELCON 1/4 .250 1/4 1.00 7.75 29.33 7<br />
P443 Diaphragm 125 3 8.5 0.204 CELCON 1/4 .250 3/8 1.00 7.75 29.33 7<br />
P462 Diaphragm 125 3 8.5 0.204 CELCON 1/4 .250 1/4 1.00 7.75 29.33 7<br />
P462F Dia/flow disc 125 3 8.5 0.204 CELCON 1/4 .250 1/4 disc .5 - 1.0 - 1.5 gpm<br />
P463 Diaphragm 125 3 8.5 0.204 CELCON 1/4 .250 3/8 1.00 7.75 29.33 7<br />
P463F Dia/flow disc 125 3 8.5 0.204 CELCON 1/4 .250 3/8 disc .5 - 1.0 - 1.5 gpm<br />
P404J Diaphragm 125 3 8.5 0.204 CELCON 3/8 .375 1/2 1.00 7.75 29.33 9<br />
Mini Valves Normally Open<br />
OP442 Diaphragm 125 3 8.5 0.204 CELCON 1/4 .250 1/4 1.00 7.75 29.33 8<br />
OP443 Diaphragm 125 3 8.5 0.204 CELCON 1/4 .250 3/8 1.00 7.75 29.33 8<br />
O442P Diaphragm 125 3 8.5 0.204 BRASS 1/4 .250 1/4 1.00 7.75 29.33 8<br />
O443P Diaphragm 125 3 8.5 0.204 BRASS 1/4 .250 3/8 1.00 7.75 29.33 8<br />
OPP442 Diaphragm 125 3 8.5 0.204 GLASS FILLED POLY 1/4 .250 1/4 1.00 7.75 29.33 9<br />
OPP443 Diaphragm 125 3 8.5 0.204 GLASS FILLED POLY 1/4 .250 3/8 1.00 7.75 29.33 9<br />
Diaphragm Valves Normally Closed<br />
463PS Diaphragm 150 3 10.2 0.204 303 SS 3/8 .375 3/8 2.00 15.50 58.67 7<br />
464PS Diaphragm 150 3 10.2 0.204 303 SS 3/8 .375 1/2 2.00 15.50 58.67 7<br />
466P Diaphragm 150 3 10.2 0.204 GLASS FILLED NYLON 3/4 .750 3/4 10.00 77.50 293.34 9<br />
473P Diaphragm 150 1 10.2 0.068 BRASS 9/16 .563 3/8 3.50 27.13 102.67 5<br />
474P Diaphragm 150 1 10.2 0.068 BRASS 9/16 .563 1/2 4.00 31.00 117.34 5<br />
476P Diaphragm 150 1 10.2 0.068 BRASS 3/4 .750 3/4 5.00 38.75 146.67 5<br />
476PS Diaphragm 150 1 10.2 0.068 303 SS 3/4 .750 3/4 5.00 38.75 146.67 5<br />
Diaphragm Valves Normally Open<br />
O463PS Diaphragm 150 3 10.2 0.204 303 SS 3/8 .375 3/8 2.00 15.50 58.67 9<br />
O464PS Diaphragm 150 3 10.2 0.204 303 SS 3/8 .375 1/2 2.00 15.50 58.67 9<br />
O473P Diaphragm 150 1 10.2 0.068 BRASS 9/16 .563 3/8 3.50 27.13 102.67 8<br />
O474P Diaphragm 150 1 10.2 0.068 BRASS 9/16 .563 1/2 4.00 31.00 117.34 8<br />
O476P Diaphragm 150 1 10.2 0.068 BRASS 3/4 .750 3/4 5.00 38.75 146.67 8<br />
Corrosive Liquids<br />
481P Direct-Dia. vac PVC 5/32 .172 1/8 0.27 2.09 7.92 10<br />
481-2 Direct-Dia. vac PVC 5/32 .172 0.27 2.09 7.92 10<br />
“injector, dual inlet”<br />
482-2 Direct-Dia. vac PVC 5/32 .172 1/4 0.27 2.09 7.92 10<br />
adjustable<br />
Round Body, Single Station Valves<br />
491Sxxx Direct 150 0 10.2 0 303 SS 1/8 .125 1/8 0.27 2.09 7.92 6<br />
492Sxxx Direct 150 0 10.2 0 303 SS 1/8 .125 1/4 0.27 2.09 7.92 6<br />
3/32 available<br />
Manifold Valves<br />
491Mxxx Direct 150 0 10.2 0 BRASS BLOCK / 1/8 .125 1/8 0.27 2.09 7.92 6<br />
492Mxxx Direct 150 0 10.2 0 SS SEATS 1/8 .125 1/4 0.27 2.09 7.92 6<br />
3/32 available<br />
492MSSxxx Direct 150 0 10.2 0 303 SS 1/8 .125 1/4 0.27 2.09 7.92 6<br />
High <strong>Pressure</strong> Normally Closed<br />
453P* Pilot-Piston 1200 10 81.6 0.68 BRASS 7/20 .350 3/8 1.80 13.95 52.80 5<br />
453S*** Pilot-Piston 1200 10 81.6 0.68 BRASS 7/20 .350 3/8 1.80 13.95 52.80 5<br />
454P** Pilot-Piston 1200 10 81.6 0.68 BRASS 1/2 .500 1/2 3.70 28.68 108.53 5<br />
458P** Pilot-Piston 1200 10 81.6 0.68 BRASS 15/16 .939 1 11.10 86.03 325.60 5<br />
458PS*** Pilot-Piston 1200 10 81.6 0.68 BRASS 15/16 .939 1 11.10 86.03 325.60 5<br />
High <strong>Pressure</strong> Normally Open<br />
O453P** Norm-Open 1000 10 68 0.68 BRASS 7/20 .350 3/8 1.80 13.95 52.80 8<br />
O453S*** Norm-Open 1000 10 68 0.68 BRASS 7/20 .350 3/8 1.80 13.95 52.80 8<br />
* stainless steel piston (no sleeve) ** stainless steel sleeve with brass piston *** (s) designates stainless steel sleeve and piston<br />
Note: All high pressure valves with a DC Coil must be derated to 900 psi.<br />
2
Solenoid Valves<br />
There are two basic types of solenoid valves. The most common is the normally closed<br />
type in which the valve opens when the coil is energized. The other type is the normally<br />
open valve which closes when the coil is energized.<br />
These valves are suitable for most industrial applications. They are ideal for water, air,<br />
light oil, noncorrosive and nonexplosive liquids. Valves are rated for 200ºF/93ºC fluid and<br />
120ºF/49ºC ambient except for the Mini Valves which are rated for 180ºF/82ºC fluid and<br />
120ºF/49ºC ambient, (see pages 7-9). The molded waterproof coils have wiring options<br />
that include a junction box, spade, conduit and din. They have voltage options of 12VDC,<br />
24VDC, and 24, 120, 208, and 240VAC 50/60 cycle on most models. Component materials<br />
are available in Buna N, EPDM, Viton, Teflon and Silicone. <strong>DEMA</strong> offers valves made<br />
from brass, stainless steel, Celcon, PVC, polypropylene and nylon. Stainless steel seats<br />
are standard on all pilot piston, diaphragm (except mini series), and high pressure<br />
valves. Valves may be mounted in any position except with the coil under the valve.<br />
Listed by Underwriter’s Laboratories, <strong>Inc</strong>. (except high pressure).<br />
Construction<br />
<strong>DEMA</strong> solenoid valves are constructed to insure long, trouble free life. They employ<br />
proven design features for reliable performance on all applications. Quality is maintained<br />
by strict control methods in all phases of production. Detailed testing of every valve<br />
produced during all phases of production is followed by 100% testing for body and<br />
seat tightness, electrical characteristics, and valve operation. All <strong>DEMA</strong> valves are<br />
manufactured in our Missouri plants.<br />
Electrical<br />
<strong>DEMA</strong> solenoid valves are available in many AC and DC voltage ratings.<br />
For ease of identification, coils are manufactured with the following lead wire colors.<br />
LEADS MOLDED SPADE<br />
12 VDC/24 VDC Black 12 VDC/24 VDC Black<br />
24/50-60 AC Orange 24/60 VAC Blue<br />
120/50-60 AC Blue 120/60 VAC Green<br />
208-240/50-60 AC Red 240/60 VAC Red<br />
Leads on valves with a conduit boss and flying lead coils are 18” long while coil leads on<br />
valves with a junction box are 6” in length.<br />
3
SOLENOID VALVES<br />
Direct Acting Valves<br />
Normally Closed<br />
Application: Water, air, light oil, noncorrosive and nonexplosive liquids.<br />
Operation: The stem and plunger assembly opens the port of the<br />
valve directly. Limited to the smaller valves with port sizes of less than<br />
1/4 inch. Requires no minimum pressure to operate.<br />
Valves rated 200F/93C fluid, 120F/49C ambient<br />
401P<br />
492SM (with Din) 303 SS<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor<br />
401P Brass Buna N max 150 psi min 0 psi 1/4 N.P.T. 7/64 0.27<br />
401PV Brass Viton max 150 psi min 0 psi 1/4 N.P.T. 7/64 0.27<br />
Less Metering<br />
491S-8 303 SS *Buna N max 150 psi min 0 psi 1/8 N.P.T. 1/8 0.27<br />
492S-8 303 SS *Buna N max 150 psi min 0 psi 1/4 N.P.T. 1/8 0.27<br />
With Metering<br />
3/32 available<br />
492SM-8 303 SS *Buna N max 150 psi min 0 psi 1/4 N.P.T. 1/8 0.27<br />
3/32 available<br />
* Available with EPDM and Viton (see page 6)<br />
Pilot-Piston Valves<br />
Normally Closed<br />
Application: Water, air, light oil, noncorrosive and nonexplosive liquids.<br />
Operation: The stem and plunger assembly opens the port.<br />
This releases the pressure on top of the piston, which moves upward<br />
and opens the main valve port.<br />
• All pilot piston valves have stainless steel seats<br />
Valves rated 200F/93C fluid, 120F/49C ambient<br />
412P<br />
A413P<br />
A414P<br />
A416P<br />
A418P<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor<br />
412P Brass Teflon max 150 psi min 1 psi 3/8 N.P.T. 9/32 1.2<br />
A413P Brass Teflon max 150 psi min 3 psi 3/8 N.P.T. 5/16 2.0<br />
A414P Brass Teflon max 150 psi min 3 psi 1/2 N.P.T. 7/16 3.1<br />
A416P Brass Teflon max 150 psi min 3 psi 3/4 N.P.T. 19/32 5.0<br />
A418P Brass Teflon max 150 psi min 3 psi 1 N.P.T. 3/4 8.0<br />
4
473P<br />
476P<br />
474P<br />
476PS<br />
Diaphragm Valves<br />
Normally Closed<br />
Application: Water, air, light oil, noncorrosive and nonexplosive liquids.<br />
Recommended for applications that have unfiltered fluid.<br />
Operation: When energized, the plunger is pulled to the top plug, thus<br />
opening the small “pilot port” in the center of the diaphragm plate.<br />
This releases the pressure on top of the diaphragm allowing incoming<br />
pressure to lift it off the large center port. When de-energized, the<br />
solenoid plunger is pushed from the top plug by the kick-off spring and<br />
closes the pilot port. Fluid passes through the diaphragm bleed hole<br />
until pressure is equalized on both sides of the diaphragm to shut off<br />
the large port.<br />
All diaphragm valves have stainless steel seats<br />
Valves rated 200F/93C fluid, 120F/49C ambient<br />
• Suitable for up to 10 psi steam, 240F/115C with Teflon Diaphragm,<br />
add suffix (T) for Teflon Diaphragm<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor<br />
473P Brass Buna N max 150 psi min 1 psi 3/8 N.P.T. 9/16 3.5<br />
474P Brass Buna N max 150 psi min 1 psi 1/2 N.P.T. 9/16 4.0<br />
476P Brass Buna N max 150 psi min 1 psi 3/4 N.P.T. 3/4 5.0<br />
476PS 303 SS Buna N max 150 psi min 1 psi 3/4 N.P.T. 3/4 5.0<br />
453P<br />
454P<br />
High <strong>Pressure</strong><br />
Valves Up to 1200 psi<br />
Normally Closed<br />
Application: Water<br />
All valves have stainless steel sleeves and seats except 453P.<br />
(S) designates stainless steel piston<br />
Operation: Same as a pilot operated valve except the pilot port<br />
is in a separate chamber from the piston. This allows the plunger to<br />
operate closer to the top plug with more force and consequently<br />
higher opening pressure.<br />
Valves rated 200F/93C fluid, 120F/49C ambient<br />
458P<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor<br />
453P Brass Teflon max 1200 psi min 10 psi 3/8 N.P.T. 11/32 1.8<br />
453S Brass w/Stainless Steel Piston Teflon max 1200 psi min 10 psi 3/8 N.P.T. 11/32 1.8<br />
454P Brass Teflon max 1200 psi min 10 psi 1/2 N.P.T. 1/2 3.7<br />
458P Brass Teflon max 1200 psi min 10 psi 1 N.P.T. 15/16 11.1<br />
458PS Brass w/Stainless Steel Piston Teflon max 1200 psi min 10 psi 1 N.P.T. 15/16 11.1<br />
5
SOLENOID VALVES<br />
Direct Acting Single Station and Manifold Valves<br />
Normally Closed<br />
Application: Water, air, light oil, noncorrosive and nonexplosive liquids.<br />
303 Stainless steel single station round body valve Metering "screw available on 1/4"(NPT model).<br />
Model No. No. Sta. Coil/Voltage Seal Pipe Size Orifice CV Flow-Factor<br />
Less Metering * **<br />
491S-8-3 1 Spade 24 vac Buna N 1/8 NPT 1/8 0.27<br />
491S-8-6 1 Spade 120 vac Buna N 1/8 NPT 1/8 0.27<br />
492S-8-3 1 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492S-8-6 1 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
With Metering<br />
492SM-8-3 1 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492SM-8-6 1 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
*add (D) for DIN<br />
** available with Viton and EPDM<br />
MANIFOLD<br />
NUMBERING<br />
SYSTEM<br />
Manifold Valves<br />
Brass<br />
Stainless steel valves mounted on a solid brass manifold block.<br />
Common inlet port for "chemical supply to all valves on both ends. Metering screw available on 1/4"" NPT model."<br />
Model No. No. Sta. Coil/Voltage Seal Pipe Size Orifice CV Flow-Factor<br />
Less Metering * ** *** ****<br />
492M1-8-3 1 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M1-8-6 1 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492M2-8-3 2 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M2-8-6 2 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492M3-8-3 3 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M3-8-6 3 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492M4-8-3 4 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M4-8-6 4 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492M5-8-3 5 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M5-8-6 5 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
*add (D) for DIN<br />
****3/32 available<br />
With Metering<br />
492M1M-8-3 1 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M1M-8-6 1 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492M2M-8-3 2 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M2M-8-6 2 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492M3M-8-3 3 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M3M-8-6 3 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492M4M-8-3 4 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M4M-8-6 4 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492M5M-8-3 5 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492M5M-8-6 5 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
*add (D) for DIN<br />
Pipe Size NPT, 1=1/8”, 2=1/4”<br />
Manifold<br />
Number of Stations<br />
Metering<br />
Orifice Size in 1/64”, 6=3/32”, 8=1/8”<br />
Material: Buna is standard (V=Viton, E=EP)<br />
Coil Voltage: 3 = 24 vac, 6 = 120 vac<br />
D = Din<br />
Model No.492M3M — — — —<br />
*** 1/8 NPT available non metered only<br />
Stainless Steel<br />
303 Stainless steel block. Common inlet port for chemical supply to all valves on both ends.<br />
****3/32 available<br />
Model No. # Sta. Coil/Voltage Seal Pipe Size Orifice CV Flow-Factor<br />
Less Metering * **<br />
492MSS2-8-3 2 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS2-8-6 2 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS3-8-3 3 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS3-8-6 3 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS4-8-3 4 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS4-8-6 4 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS5-8-3 5 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS5-8-6 5 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
*add (D) for DIN<br />
With Metering<br />
492MSS2M-8-3 2 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS2M-8-6 2 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS3M-8-3 3 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS3M-8-6 3 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS4M-8-3 4 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS4M-8-6 4 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS5M-8-3 5 Spade 24 vac Buna N 1/4 NPT 1/8 0.27<br />
492MSS5M-8-6 5 Spade 120 vac Buna N 1/4 NPT 1/8 0.27<br />
*add (D) for DIN<br />
** available with Viton and EPDM<br />
492SM Single Station<br />
492M1M One Station<br />
492MSS2 Two Station<br />
492MSS3 Three Station<br />
492M3M Three Station<br />
492MSS4M Four Station<br />
492M5M Five Station<br />
6
Mini<br />
Diaphragm<br />
Valves<br />
FLOAT VALVES<br />
NSF ®<br />
Normally Closed<br />
Application: Water, air, light oil,<br />
noncorrosive and nonexplosive<br />
liquids.<br />
60 mesh stainless steel filter<br />
on series 442 and 443, rated<br />
for 180˚F/82˚C fluid and<br />
120˚F/49˚C ambient.<br />
Available with EPDM (Std)<br />
Viton or Buna N diaphragm<br />
442P, 443P P442, P443<br />
NSF Std. 61, C-2 Approved<br />
463PS, 464PS 303SS<br />
NSF Std. 61, C-2 Approved<br />
463PS-D<br />
464PS-D<br />
NSF Std. 61, C-2 Approved<br />
463PSJ<br />
464PSJ<br />
NSF Std. 61, C-2 Approved<br />
P462, P463<br />
NSF Std. 61, C-2 Approved<br />
443PFB Flow Disc,<br />
*Optional disc available<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor NSF Std. 61, C-2 Approved<br />
442P Brass EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1 No<br />
443P Brass EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1 No<br />
443PFB Brass EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 2.38 or 1.06 gpm flow disc* No<br />
P442 Celcon EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1 Yes<br />
P443 Celcon EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1 Yes<br />
PP442 Polypropylene EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1 No<br />
PP443 Polypropylene EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1 No<br />
P462 Celcon EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1 Yes<br />
P463 Celcon EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1 Yes<br />
P462F-5 Celcon EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 .5 gpm flow disc Yes<br />
P462F-10 Celcon EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1.0 gpm flow disc Yes<br />
P462F-15 Celcon EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1.5 gpm flow disc Yes<br />
P463F-5 Celcon EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 .5 gpm flow disc Yes<br />
P463F-10 Celcon EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1.0 gpm flow disc Yes<br />
P463F-15 Celcon EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1.5 gpm flow disc Yes<br />
463PS 303 SS EPDM max 125 psi min 3 psi 3/8 N.P.T. 3/8 2 Yes<br />
463PS-D 303 SS EPDM max 125 psi min 3 psi 3/8 N.P.T 3/8 2 Yes<br />
463PSJ 303 SS EPDM max 125 psi min 3 psi 3/8 N.P.T 3/8 2 Yes<br />
464PS 303 SS EPDM max 125 psi min 3 psi 1/2 N.P.T 3/8 2 Yes<br />
464PS-D 303 SS EPDM max 125 psi min 3 psi 1/2 N.P.T 3/8 2 Yes<br />
464PSJ 303 SS EPDM max 125 psi min 3 psi 1/2 N.P.T 3/8 2 Yes<br />
7
SOLENOID VALVES<br />
Normally Open<br />
Diaphragm Valves<br />
Application: Water, air, light oil,<br />
noncorrosive and nonexplosive<br />
liquids.<br />
Valves rated 200F/93C fluid,<br />
120F/49C ambient<br />
• Stainless steel seat<br />
O473P<br />
O474P<br />
O476P Shown with Din<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor<br />
O473P Brass Buna N max 150 psi min 1 psi 3/8 N.P.T. 9/16 3.5<br />
O474P Brass Buna N max 150 psi min 1 psi 1/2 N.P.T. 9/16 4.0<br />
O476P Brass Buna N max 150 psi min 1 psi 3/4 N.P.T. 3/4 5.0<br />
Normally Open<br />
High <strong>Pressure</strong> Valves<br />
Up to 1000 psi<br />
Application: Water<br />
(S) designates stainless steel piston<br />
Valves rated 200F/93C fluid,<br />
120F/49C ambient<br />
O453P<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor<br />
O453P Brass Teflon max 1000 psi min 10 psi 3/8 N.P.T. 11/32 1.8<br />
O453S Brass Teflon max 1000 psi min 10 psi 3/8 N.P.T. 11/32 1.8<br />
Normally Open<br />
Mini Diaphragm Valves<br />
Application: Water, air, light oil, noncorrosive and nonexplosive liquids.<br />
• Ideal for weep systems<br />
• 442 and 443 series valves rated for 180˚F/82˚C fluid<br />
and 120˚F/49˚C ambient.<br />
O442P/O443P<br />
OP442/OP443<br />
NSF Std. 61, C-2 Approved<br />
8
Normally Open<br />
Mini Diaphragm Valves<br />
Continued<br />
OPP442/OPP443 O463PS/O464PS<br />
NSF Std. 61, C-2 Approved<br />
Special<br />
Purpose Valves<br />
Normally Closed<br />
Application:<br />
Water, air, light oil, noncorrosive and nonexplosive liquids.<br />
Manifolding diaphragm valves can be joined together to form<br />
a manifold without bushings or connectors.<br />
P404J<br />
466P<br />
(two valves coupled together)<br />
* 30% Glass Filled Polypropylene<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor NSF Std. 61, C-2 Approved<br />
OP442 Celcon EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1 Yes<br />
OP443 Celcon EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1 Yes<br />
O442P Brass EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1 No<br />
O443P Brass EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1 No<br />
OPP442 Polypropylene EPDM max 125 psi min 3 psi 1/4 N.P.T. 1/4 1 No<br />
OPP443 Polypropylene EPDM max 125 psi min 3 psi 3/8 N.P.T. 1/4 1 No<br />
O463PS 303 SS EPDM max 125 psi min 3 psi 3/8 N.P.T. 3/8 2 Yes<br />
O464PS 303 SS EPDM max 125 psi min 3 psi 1/2 N.P.T. 3/8 2 Yes<br />
P404J<br />
*<br />
30% Glass Filled Polypropylene<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor<br />
P404J<br />
*<br />
EPDM max 125 psi min 3 psi 1/2 N.P.T. 3/8 1.0<br />
466P Glass Filled Nylon Viton max 150 psi min 3 psi 3/4 N.P.T. 3/4 10.0<br />
9
SOLENOID VALVES<br />
Direct<br />
Acting<br />
Valves for<br />
Corrosive<br />
Liquids<br />
Normally closed<br />
481P * 481-2 200 PSI maximum pressure 482-2<br />
Direct acting diaphragm used on vacuum<br />
lines with corrosive liquids.<br />
Injector mounted, dual inlet used with<br />
corrosive liquids. Can be mounted on all<br />
B and C series injectors.<br />
Direct acting diaphragm used on vacuum<br />
lines with corrosive liquids, adjustable.<br />
* Can be injector mounted by using Kit 24-50 for 1/4 inch metering knob (see page 15).<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Orifice CV Flow-Factor<br />
481P* PVC EPDM vacuum 1/8 N.P.T. 5/32 0.27<br />
481-2 PVC EPDM vacuum Injector Mounted 5/32 0.27<br />
482-2 PVC EPDM vacuum 1/4 N.P.T. 5/32 0.27<br />
Coil Options<br />
Coils rated NEMA 1, Conduit and Din Coils NEMA 4<br />
59-98 NEMA 4 Wiring Connector<br />
for #5 & #7 Spade Coils 18"Leads<br />
Junction Box<br />
Conduit<br />
Spade<br />
Molded Spade<br />
*Available on:<br />
442 & 443 Series<br />
P462, P463, P404J, 463PS<br />
476PS, 464PS, 463PSJ, 464PSJ,<br />
491S, 492S, 492SM, 491M’s,<br />
and 492M’s Series<br />
Flying lead coil<br />
24 VAC and 120 VAC only<br />
*Available on: 442 & 443 Series<br />
P462, P463, P404J, 463PS, 476PS,<br />
464PS, 463PSJ, 464PSJ, 491S,<br />
492S, 492SM, 491M’s, and<br />
492M’s Series<br />
Din<br />
Din Female connector<br />
41-77-100110<br />
Additional connectors with<br />
alternate size and wiring available<br />
by special order<br />
Electrical Connection<br />
JB - Junction Box Standard<br />
C - Conduit<br />
D - Din<br />
S - Spade<br />
Coil Designation Voltage Color<br />
2 12VDC Black<br />
4 24 VDC Black<br />
3 24VAC Blue<br />
6 120VAC Green<br />
9 240VAC Red<br />
10
Electrical Specifications<br />
Coil No. Watts Volts 50Hz 60Hz<br />
Coil No. 1 Used On<br />
401P, 473P, 474P, 476P,<br />
O473P, O474P, O476P,<br />
481P, 482-2, 466P<br />
AC<br />
AMPERES INRUSH<br />
AMPERES HOLDING<br />
50Hz 60Hz<br />
Watts Volts Amps<br />
10 24 1.8 1.5 1.0 .75 15 12 1.25<br />
120 .38 .33 .21 24 0.625<br />
208 .16 .14 .12 .09<br />
240 .19 .16 .10 .07<br />
DC<br />
Coil No. 2 Used On<br />
411P, 412P, A413P,<br />
A414P, A416P, A418P,<br />
453P, 454P, 458P,<br />
458PS, O453P, O453S<br />
Coil No. 5 Used On<br />
442P, 443P, P442,<br />
P443, P462, P463,<br />
463PS, 464PS, 463PS-D,<br />
464PS-D, 463PSJ,<br />
464PSJ, P404J<br />
Coil No. 7 Used On<br />
491M, 492M, 491S,<br />
492S, 492SM, 476PS<br />
15 24 3.7 3.0 1.6 1.2 18 12 1.5<br />
120 .73 .60 .33 .24 24 0.75<br />
208 .41 .35 .19 .14<br />
240 .36 .30 .16 .12<br />
10 24 na .67 na .48 10 12 0.83<br />
120 na .15 na .102 24 0.42<br />
240 na .075 na .05<br />
10 24 na .67 na .48 13 24 .54<br />
120 na .15 na .102<br />
Valve Repair Kits<br />
Model<br />
Kit P/N<br />
O-Ring<br />
Closing<br />
Spring<br />
Plunger<br />
Spring<br />
Plunger<br />
Valve<br />
Seat<br />
Piston<br />
Ring<br />
Backup<br />
Spring<br />
Piston<br />
Assembly<br />
Diaphragm<br />
Valve<br />
Operator<br />
Enclosing<br />
Assembly<br />
401P 41-24 Y Y Y Y<br />
412P 41-26 Y Y Y Y Y Y Y<br />
A413P 41-27 Y Y Y Y Y Y Y<br />
A414P 41-28 Y Y Y Y Y Y Y<br />
A416P 41-29 Y Y Y Y Y Y Y<br />
A418P 41-30 Y Y Y Y Y Y Y<br />
442P & 443P 61-78 Y Y Y<br />
P442 & P443 61-78 Y Y Y<br />
P462 & P463 61-78 Y Y Y<br />
463PS & 464PS 61-78 Y Y Y<br />
OP462 & OP463 41-44-1 Y Y<br />
OP442 & OP443 41-44-1 Y Y<br />
OPP442 & OPP443 41-44-1 Y Y<br />
O463PS & OP464PS 41-44-1 Y Y<br />
453P & 453S 41-31 Y Y Y Y Y Y Y<br />
454P 41-32 Y Y Y Y Y Y Y<br />
458P 41-33 Y Y Y Y Y Y Y<br />
458PS 41-33-2 Y Y Y Y Y Y Y<br />
O453P & O453S 41-58 Y Y Y Y Y Y<br />
473P & 474P 41-47 Y Y Y Y<br />
O473P & O474P 41-50 Y Y Y Y<br />
O476P 41-50-1 Y Y Y Y<br />
476P 41-49 Y Y Y Y<br />
466P & 466PV No Kit Number, Order Individual Parts<br />
492M *49-1-8 (1/8"Orfice) Y Y Y Y Y<br />
*49-1-6 (3/32"Orfice) Y Y Y Y Y<br />
*Note: Add suffix (B) Buna, (E) EP, (V) Viton i.e. 49-1-8V<br />
11
Y TYPE STRAINERS<br />
Y-Type Line Strainers<br />
For use in waterlines ahead of solenoid valves, chemical<br />
injectors, spray nozzles, or any equipment where operation<br />
could be impaired by foreign matter.<br />
Brass or Cast Bronze<br />
For water applications and other liquids.<br />
S2B Forged Brass<br />
S3B Forged Brass<br />
Model No. Size NPT<br />
S2B 1/4<br />
S3B 3/8<br />
S4B 1/2<br />
S6B 3/4<br />
S10B 1<br />
S4B Forged Brass<br />
S6B Forged Brass<br />
Maximum <strong>Pressure</strong> 300 psi at 150 F<br />
150 psi at 375 F<br />
• Large capacity screen has open area 3 times the pipe area<br />
• Quick cleaning: screen assembly easily removed<br />
• Corrosion resistant stainless steel screen<br />
• 40 mesh (420 microns) or 80 mesh (177 microns)<br />
stainless steel wire screens available<br />
S10B Cast Bronze<br />
Delrin<br />
For line pressure water applications and fluids corrosive to brass.<br />
Model No. Size NPT<br />
S2P 1/4<br />
S3P 3/8<br />
S2P<br />
S3P<br />
Maximum <strong>Pressure</strong> 125 psi at 180 F<br />
• Large capacity screen has open area 3 times the pipe area<br />
• Corrosion resistant: Delrin plastic body<br />
• 100 mesh (150 microns) stainless steel screen<br />
• FDA approved: All materials have FDA approval for use in food<br />
and beverage preparation equipment<br />
12
FLOAT VALVES<br />
Float Valves<br />
Automatically maintains a desired level of proportioned<br />
mixture in any drum, tank or other type reservoir.<br />
Magnetically activated “snap acting” float valves provide<br />
full water flow to activate the chemical proportioners.<br />
Ideal for car washes, carpet cleaning machines, and rapid<br />
filling of totes.<br />
437PN<br />
440-23<br />
Model No. Body Seal <strong>Pressure</strong> Pipe Size Description Flow Rate Max. Oz/Gal Induction<br />
440N Celcon Buna N Std. Hose. float valve only 6 GPM at 50 psi –<br />
440-23BT Celcon Buna N Max 150 psi Min 15 psi Std. Hose. float valve with small barb and tip 4 GPM at 50 psi 12<br />
440-23T Celcon Buna N Max 150 psi Min 15 psi Std. Hose. float valve with large barb and tip 4 GPM at 50 psi 35<br />
440-22BT Celcon Buna N Max 150 psi Min 15 psi Std. Hose. float valve with small barb and tip, no backflow preventer 4 GPM at 50 psi 12<br />
440-23AG Celcon Buna N Max 150 psi Min 15 psi Std. Hose. float valve with large barb and tip with air gap 4 GPM at 50 psi 35<br />
440-24 Celcon Buna N Max 150 psi Min 15 psi Std. Hose. float valve, high induction 2.5 GPM at 50 psi 70<br />
437-PN * Buna N Std. Hose float valve only 64 GPM at 50 psi –<br />
437P-21 * Buna N Max 150 psi Min 15 psi Std. Hose. float valve high flow 22 GPM at 50 psi 10<br />
* 30% Glass Filled Nylon<br />
13
INJECTORS<br />
Inline Chemical Injectors for injecting fluids or air into lines<br />
conveying liquid under pressure.<br />
The <strong>DEMA</strong> injector is a jet pump. A liquid under pressure, usually water, enters the injector and accelerates into a jet through the<br />
nozzle. This high velocity jet creates a vacuum, which causes fluid to be drawn through the suction tube and into the injector. The<br />
mixture then flows into a diverging (venturi) passage where pressure is recovered as the flow slows down. A portion of the energy<br />
of the water is imparted to the injected fluid so the reconverted pressure cannot be as high as the pressure supply. In effect the<br />
fluid is pumped into the water line; the reduction in pressure reflects the energy required to operate the “pump”.<br />
A minimum 35% pressure drop is required to create the vacuum.<br />
Advantages of the Injector<br />
Injectors have no moving parts, nothing to wear out or lubricate, resulting in extremely low maintenance. They are compact,<br />
needing no foundation or mounting bracket, and can be installed in any position. Injectors require no wiring, are self-priming and<br />
need no bleeding or filling. Injection rate is simple to set and can be quickly adjusted during operation. There is nothing to drain<br />
for seasonal shut down.<br />
General Information<br />
Standard C series have a molded Ryton knob with a stainless steel metering screw.<br />
For special requirements add the following suffixes to the model number.<br />
P: Special C20 stainless steel metering screw for highest corrosion resistance.<br />
S: Stainless steel knob for high pressures (over 700psi).<br />
T: Uses metering tip kit. (see page 15)<br />
All injectors have a check valve to prevent backflow into the fluid container when there is no water flowing or while rinsing.<br />
An 8 ft. length of flexible vinyl suction tubing with a foot strainer is supplied.<br />
Application and Selection<br />
<strong>DEMA</strong> injector selection must be based on the water flow and pressure at the location where the injector is to be installed.<br />
DO NOT size the injector by pipe size. If these quantities are known, choose correct model from Tables on (pages 16 and 17).<br />
If theses quantities are not known, it is permissible to use spray nozzle rating at any pressure for selection. Once an injector<br />
has been matched to a spray nozzle system, it will continue to function regardless of fluctuations in line pressure, as the<br />
water flow will also fluctuate in proportion. Flow rating of 40 psi is the basis of the spray nozzle numbering system<br />
see glossary on (page 21) and is, therefore, most frequently used. Lengthy piping, hose, or other restrictions resulting in<br />
pressure loss must be added to the rated pressure before selection.<br />
Injection Capabilities<br />
Every injector is supplied with a metering screw or metering tips (T) for setting injection rates within maximum and minimum<br />
capacities shown in Tables. Maximum injections of viscous fluids (above 75cps) can be increased by ordering the high induction<br />
metering knob kit, p/n 24-56 (page 15).<br />
NOTE: Three nozzle bushings are supplied with each C series injector for precise sizing of the injector to water flow within the<br />
ranges shown. The maximum injection quantities can be doubled by using a nozzle bushing one size smaller than specified,<br />
but the pressure loss will be 50%. If your flow is in the lower third of the GPM range, order the next smallest injector to<br />
double the injection rate.<br />
14
C Series Injectors<br />
<strong>Pressure</strong>:<br />
Ryton metering knob and check valve core for high chemical resistance.<br />
700 PSI (48 Bar) water at room temperature.<br />
500 PSI (34 Bar) water at 150 degrees F (66 degrees C).<br />
Stainless steel metering knob (S) for high pressure<br />
(700-3000 PSI or 48-204 Bar)<br />
Chemical adjustment:<br />
Metering screw standard on “C” Series injectors (i.e. 204C).<br />
Metering tips are color-coded orifices of different sizes used to<br />
proportion the chemical (add a “T” to the model number (i.e. 204CT).<br />
Tip Kit ordered separately<br />
Metering knob assembly (bolted onto the body with four screws)<br />
can be oriented in any direction for ease of access in tight spots.<br />
Small (1/4 inch barb) and large (3/8 inch barb) metering knobs<br />
are interchangeable on all inline injectors.<br />
204C<br />
208C<br />
Each injector is supplied with 3 water nozzle bushings (Figure No. 1)<br />
for precise sizing of the injector to water flow within the ranges<br />
shown. Nozzle selection is specified in the installation instructions<br />
included with each injector. All injectors are equipped with a metering<br />
screw or metering tips”T” to adjust injection rate up to figures shown<br />
in tables (page 16).<br />
For applications using caustic or acidic solutions order metering tip<br />
adjustment and metering tip kit, specify “T” after the model number.<br />
Metering tip adjusts injection rate instead of metering screw.<br />
100-15K<br />
100-15KU<br />
100-15K Tip kit<br />
100-15KU Ultra lean tip kit<br />
44-61P Capillary metering tip for lean dilutions<br />
HIGH INDUCTION METERING KNOB KIT No. 24-56,<br />
24-56T, 24-56S<br />
Higher induction rates (especially of viscous liquids) can be obtained<br />
by replacing the standard metering knob with a high capacity<br />
metering knob and check valve parts.<br />
DRUM MOUNTING KIT No. 24-32DM<br />
Allows injector sizes up through 204C to be mounted directly on a<br />
drum or tote with a 2 inch bung.<br />
SUPPLY TUBING<br />
FITTING<br />
* TIP<br />
Figure No. 1<br />
DRUM MOUNTING KIT No. 23-26CDM, 23-26CTDM<br />
Allows injector sizes 206C and 208C to be mounted on a drum or<br />
tote with a 2 inch bung.<br />
WATER<br />
NOZZLE<br />
BUSHING<br />
Figure No. 2<br />
* METERING<br />
SCREW<br />
* Metering Knobs are either screw or tip type, not both.<br />
PIPE ADAPTER KIT No. 24-50 FOR MOUNTING A<br />
VALVE ON THE INJECTOR CHEMICAL INTAKE BARB:<br />
Model 44-71 PVC Ball Valve or Model 481P Solenoid<br />
Valve (Figure No. 2)<br />
May be placed in the chemical supply line to turn the chemical<br />
supply on or off. <strong>DEMA</strong> Kit 24-50 slips over the metering knob<br />
barb and provides a 1/8” MNPT (Male National Pipe Taper) for the<br />
valves to screw directly onto the metering knob for models 200-3C<br />
through 204C.<br />
Models 206 and 208 use metering knob part number 23-33-1.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
KIT<br />
24-50<br />
Figure No. 3<br />
BALL<br />
VALVE<br />
44-71<br />
or<br />
481P VALVE<br />
Figure No. 3<br />
A. MNPT Outlet (Male National Pipe Taper)<br />
B. Metering Knob<br />
C. Mounting screws<br />
D. Metering Tip (optional, add a “T” to the model number<br />
if you want metering tips for chemical adjustment)<br />
E. Metering Screw (is standard when metering tips are<br />
not specified)<br />
F. FNPT Inlet (Female National Pipe Taper)<br />
15
INJECTORS<br />
C Series Injector Selection Table<br />
Total Spray Nozzle Flow - GPM<br />
Pipe Nozzle Pump Discharge <strong>Pressure</strong> PSI (Inlet) Max.Injection OZ/MIN<br />
Model Size NPT Bushing *Viscosity - CPS<br />
15 30 45 60 75 90 120 150 230 300 390 1 75 220 500<br />
200-3C 02 .10 .12 .13 .16 .15 .19 .17 .21 .19 .22 .21 .26 .24 .30 .26 .33 .31 .37 .37 .44 .41 .49<br />
and 1/8 03 .12 .16 .16 .21 .19 .24 .21 .28 .22 .27 .26 .33 .30 .38 .33 .42 .37 .45 .44 .53 .49 .59 3 0.5 0.3 0.2<br />
200-3CT 04 .16 .20 .21 .26 .24 .30 .28 .34 .27 .39 .33 .41 .38 .47 .42 .52 .45 .65 .53 .76 .59 .85<br />
200C 1 .20 .25 .26 .32 .30 .38 .34 .43 .39 .46 .41 .52 .47 .59 .52 .66 .65 .77 .76 .91 .85 1.0<br />
and 1/8 2 .25 .32 .32 .41 .38 .48 .43 .55 .46 .56 .52 .66 .59 .76 .66 .84 .77 .92 .91 1.1 1.0 1.2 5 1.5 0.5 0.3<br />
200CT 3 .32 .39 .41 .51 .48 .60 .55 .68 .56 .76 .66 .82 .76 .95 .84 1.0 .92 1.3 1.1 1.5 1.2 1.7<br />
201C 4 .39 .49 .51 .64 .60 .76 .68 .86 .76 .96 .82 1.0 .95 1.2 1.0 1.3 1.3 1.6 1.5 1.9 1.7 2.1<br />
and 1/8 5 .49 .63 .64 .82 .76 .97 .86 1.1 .96 1.2 1.0 1.3 1.2 1.5 1.3 1.7 1.6 1.9 1.9 2.3 2.1 2.5 7 4 2 1<br />
201CT 6 .63 .79 .82 1.0 .97 1.2 1.1 1.4 1.2 1.5 1.3 1.6 1.5 1.9 1.7 2.1 1.9 2.5 2.3 2.9 2.5 3.3<br />
202C 7 .79 .98 1.0 1.3 1.2 1.5 1.4 1.7 1.5 1.9 1.6 2.1 1.9 2.4 2.1 2.6 2.5 3.2 2.9 3.8 3.3 4.2<br />
and 1/4 8 .98 1.3 1.3 1.6 1.5 1.9 1.7 2.2 1.9 2.3 2.1 2.6 2.4 3.0 2.6 3.4 3.2 3.7 3.8 4.5 4.2 5.0 11 6 2.5 1.3<br />
202CT 9 1.3 1.6 1.6 2.0 1.9 2.4 2.2 2.7 2.3 3.0 2.6 3.3 3.0 3.8 3.4 4.2 3.7 5.0 4.5 6.0 5.0 6.7<br />
203C 10 1.6 2.0 2.0 2.6 2.4 3.0 2.7 3.4 3.0 3.6 3.3 4.1 3.8 4.7 4.2 5.2 5.0 6.0 6.0 7.1 6.7 7.9<br />
and 3/8 11 2.0 2.5 2.6 3.3 3.0 3.9 3.4 4.4 3.6 4.8 4.1 5.3 4.7 6.0 5.2 6.7 6.0 8.0 7.1 9.1 7.9 10 21 7 3 1.3<br />
203CT 12 2.5 3.2 3.3 4.1 3.9 4.8 4.4 5.5 4.8 6.1 5.3 6.6 6.0 7.6 6.7 8.3 8.0 10 9.1 12 10 13<br />
204C 13 3.2 3.9 4.1 5.1 4.8 6.0 5.5 7.6 6.1 8.2 6.6 8.3 7.6 9.4 8.3 10 10 14 12 15 13 17<br />
and 1/2 14 3.9 5.1 5.1 6.6 6.0 7.7 7.6 8.8 8.2 9.6 8.3 11 9.4 12 10 14 14 16 15 18 17 20 30 8 3.5 1.3<br />
204CT 15 5.1 6.3 6.6 8.2 7.7 9.7 8.8 11 9.6 13 11 13 12 15 14 17 16 21 18 24 20 27<br />
206C 16 6.3 7.9 8.2 10 9.7 12 11 14 13 16 13 17 15 19 17 21 21 26 24 30 27 34<br />
and 3/4 17 7.9 10 10 13 12 15 14 18 16 19 17 21 19 24 21 27 26 31 30 36 34 40 55 33 18 12<br />
206CT 18 10 13 13 16 15 19 18 22 19 24 21 26 24 30 27 33 31 40 36 47 40 52<br />
208C 19 13 16 16 20 19 24 22 27 24 30 26 33 30 38 33 42 40 50 47 59 52 65<br />
and 1 20 16 20 20 26 24 31 27 35 30 37 33 42 38 48 42 54 50 56 59 66 65 74 60 33 18 12<br />
208CT 21 20 25 26 33 31 39 35 44 37 48 42 53 48 61 54 67 56 80 66 94 74 99<br />
Outlet <strong>Pressure</strong> 10 20 30 40 50 60 80 100 150 200 250<br />
Pipe Nozzle Pump Discharge <strong>Pressure</strong> PSI (Inlet) Max.Injection OZ/MIN<br />
Model Size NPT Bushing<br />
*Viscosity - CPS<br />
460 540 620 *700 *770 *930 *1100 *1230 *1540 *2000 *3000 1 75 220 500<br />
200-3C 02 .44 .53 .48 .57 .51 .61 .54 .65 .57 .68 .62 .75 .67 .81 .72 .86 .80 .95 .90 1.1 1.1 1.3<br />
and 1/8 03 .53 .64 .57 .69 .61 .74 .65 .78 .68 .82 .75 .89 .81 .97 .86 1.0 .95 1.1 1.1 1.3 1.3 1.6 3 0.5 0.3 0.2<br />
200-3CT 04 .64 .92 .69 1.0 .74 1.1 .78 1.1 .82 1.2 .89 1.3 .97 1.4 1.0 1.5 1.1 1.7 1.3 1.9 1.6 2.3<br />
200C 1 .92 1.1 1.0 1.2 1.1 1.2 1.1 1.3 1.2 1.4 1.3 1.5 1.4 1.7 1.5 1.8 1.7 2.0 1.9 2.3 2.3 2.8<br />
and 1/8 2 1.1 1.3 1.2 1.4 1.2 1.5 1.3 1.6 1.4 1.7 1.5 1.8 1.7 2.0 1.8 2.1 2.0 2.4 2.3 2.7 2.8 3.3 5 1.5 0.5 0.3<br />
200CT 3 1.3 1.8 1.4 2.0 1.5 2.1 1.6 2.2 1.7 2.3 1.8 2.5 2.0 2.7 2.1 2.9 2.4 3.2 2.7 3.7 3.3 4.5<br />
201C 4 1.8 2.3 2.0 2.5 2.1 2.7 2.2 2.8 2.3 3.0 2.5 3.2 2.7 3.5 2.9 3.7 3.2 4.1 3.7 4.7 4.5 5.8<br />
and 1/8 5 2.3 2.7 2.5 3.0 2.7 3.2 2.8 3.4 3.0 3.5 3.2 3.8 3.5 4.2 3.7 4.4 4.1 4.9 4.7 5.6 5.8 6.9 7 4 2 1<br />
201CT 6 2.7 3.6 3.0 3.8 3.2 4.1 3.4 4.3 3.5 4.6 3.8 5.0 4.2 5.4 4.4 5.8 4.9 6.4 5.6 7.3 6.9 8.9<br />
202C 7 3.6 4.6 3.8 4.9 4.1 5.3 4.3 5.6 4.6 5.9 5.0 6.4 5.4 6.9 5.8 7.4 6.4 8.2 7.3 9.4 8.9 11<br />
and 1/4 8 4.6 5.4 4.9 5.8 5.3 6.2 5.6 6.6 5.9 6.9 6.4 7.6 6.9 8.2 7.4 8.7 8.2 9.7 9.4 11 11 13 11 6 2.5 1.3<br />
202CT 9 5.4 7.3 5.8 7.9 6.2 8.4 6.6 8.9 6.9 9.3 7.6 10 8.2 11 8.7 12 9.7 13 11 15 13 18<br />
203C 10 7.3 8.6 7.9 9.2 8.4 9.9 8.9 10 9.3 11 10 12 11 13 12 14 13 15 15 18 18 21<br />
and 3/8 11 8.6 11 9.2 12 9.9 13 10 13 11 14 12 15 13 17 14 18 15 20 18 23 21 28 21 7 3 1.3<br />
203CT 12 11 15 12 16 13 17 13 18 14 19 15 20 17 22 18 24 20 26 23 30 28 36<br />
204C 13 15 19 16 20 17 21 18 23 19 24 20 26 22 28 24 30 26 33 30 40 36 49<br />
and 1/2 14 19 22 20 24 21 26 23 27 24 28 26 31 28 34 30 36 33 40 40 47 49 58 30 8 3.5 1.3<br />
204CT 15 22 30 24 32 26 34 27 36 28 38 31 41 34 45 36 48 40 53 47 62 58 75<br />
206C 16 30 37 32 40 34 42 36 45 38 47 41 52 45 56 48 60 53 66 62 76 75 93<br />
and 3/4 17 37 43 40 47 42 49 45 53 47 56 52 61 56 66 60 70 66 78 76 91 93 99 55 33 18 12<br />
206CT 18 43 57 47 61 49 65 53 69 56 73 61 80 66 86 70 92 78 99 91 99<br />
208C 19 57 71 61 77 65 82 69 87 73 91 80 99 86 99 92 99<br />
and 1 20 71 80 77 86 82 92 87 98 91 99 60 33 18 12<br />
208CT 21 80 99 86 99 92 99 98 99<br />
Outlet <strong>Pressure</strong> 300 350 400 450 500 600 700 800 1000 1300 1950<br />
Injector outlet pressure - Spray nozzle pressure plus line losses<br />
160F /77C maximum fluid temperature<br />
* For pressures above 700 PSI specify Model with suffix (S) Stainless Steel Metering Knob<br />
Note: Injection figures are for a nominal 35% pressure loss. By sizing the injector for a 50% or greater loss the figures indicated<br />
can be doubled. On Models 200-3C through 204C higher induction rates (especially of viscous materials) can also be obtained by<br />
replacing the standard metering knob with a High Capacity Metering Knob <strong>DEMA</strong> Kit No. 24-56, 24-56T or 24-56S.<br />
*Note:<br />
16<br />
Viscosity - CPS<br />
1 Water<br />
75 10 wt. Oil<br />
200 30 wt. Oil or dish detergent<br />
500 Honey<br />
Knob Kit NO. 24-56<br />
Under 700psi<br />
700 - 3000psi<br />
Ryton plastic<br />
Stainless Steel<br />
Standard 23-32 (with metering screw) 23-32S (with metering screw)<br />
Special 23-32T (with metering tips) 23-32ST (with metering tips)
B Series Injectors<br />
Externally adjustable injectors with external water flow ranges<br />
• External adjusting screw for easy compensation to system variations.<br />
• Efficiently adjusts to flow or pressure changes after installation.<br />
• Allows system to operate at maximum performance level without a teardown.<br />
• Useful in high pressure pump discharge line applications when it is desired<br />
to keep pressure loss to a minimum.<br />
204B<br />
Fluid<br />
Viscosity CPS<br />
Water flow adjusting screw<br />
Maximum Injection Ounces Per Minute<br />
3/8 NPT 3/8 NPT 1/2 NPT 3/4 NPT<br />
202B 203B 204B 206B<br />
1 8 16 36 42<br />
75 4 8 13 18<br />
220 2 4 5 8<br />
500 1 2 2 4<br />
1000 0.5 1 1 1<br />
Note: Add suffix “T” for metering tip knob<br />
For highly viscous fluids order part #24-56, 24-56T or 24-56S<br />
high induction metering knob kit on (page 15)<br />
Inlet <strong>Pressure</strong><br />
PSI<br />
Operating Range GPM<br />
3/8 NPT 3/8 NPT 1/2 NPT 3/4 NPT<br />
202B 203B 204B 206B<br />
10 .25-2.0 .50-3.5 2.0-6.4 3.6-11<br />
20 .30-2.3 .55-4.4 2.3-7.5 4.2-13<br />
40 .37-2.9 .70-5.4 2.9-9 5.3-17<br />
60 .43-3.4 .80-6.4 3.4-11 6.2 -19<br />
100 .54-4.2 1.0-8.0 4.2-14 7.7-24<br />
200 .73-5.7 1.4-11 5.7-19 11-33<br />
400 1.0-7.9 1.9-15 7.9-26 15-46<br />
500 1.2-8.9 2.1-17 8.9-29 17-51<br />
*700 1.4-11 2.5-20 11-35 20-60<br />
*1000 1.6-13 3.0-23 13-41 23-70<br />
*1500 2.0-16 3.5-28 16-50 28-87<br />
*2000 2.2-18 4.7-37 18-58 33-100<br />
*3000 2.7-20 5.0-45 20-70 40-100<br />
*Specify “S” Stainless Steel Knob Part #24-32S<br />
for pressure exceeding 700psi<br />
Special<br />
Injectors<br />
for<br />
Corrosive<br />
Applications<br />
Multiple<br />
Injection<br />
Capabilities<br />
P203C<br />
Polypropylene Plastic<br />
(same flow as 203C with<br />
# 11 nozzle bushing)<br />
125 PSI maximum pressure<br />
203B2V2<br />
Top dual assembly is p/n 481-2,<br />
200 PSI maximum pressure<br />
203BS-2<br />
303 SS (same flow as 203B)<br />
B Series<br />
203B2V2 3/8 inch<br />
204B2V2 1/2 inch<br />
206B2V2 3/4 inch<br />
• Dual Injector<br />
• Dual Solenoids<br />
• “B” Series - Adjustable<br />
• PVC Valve manifold<br />
Note: Add suffix “T”<br />
for metering tip knob<br />
204BS-2<br />
303 SS (same flow as 204B)<br />
295CS-2<br />
High <strong>Pressure</strong> Foaming <strong>Inc</strong>ludes:<br />
• Injector<br />
• Plastic backup washer<br />
• Spray wand, aerator and nozzle<br />
• Plastic tubing with foot strainer<br />
17
MixRite Water Powered Proportioning Pump<br />
• Accurate Dispensing<br />
• Uses only 20% of pressure<br />
to drive the pump<br />
• No electricity required<br />
• Low maintenance and<br />
easy to adjust<br />
Optional chemical shut-off<br />
( Models 571, 573, 575, 577, 579 )<br />
Chemically resistant polyamid 12 and<br />
fiberglass construction<br />
Easily replaceable lip seals<br />
SPECIFICATIONS:<br />
– Available with or without control valve<br />
that allows the shutoff of chemical while<br />
water is still flowing through the unit<br />
– Injection rate from .2% to 10%<br />
– Injection ratios from 1:500 to 1:10<br />
– Flows from .09 gpm to 11 gpm<br />
– Water pressure from 2.9 psi to 85 psi<br />
– Chemical resistant construction, Buna<br />
upper seals and 302 stainless springs<br />
– Viton O-ring and hastelloy spring<br />
chemical check valve<br />
– Bypass models for harsh chemicals<br />
– <strong>Inc</strong>udes 7 ft. inlet tubing and foot<br />
valve strainer<br />
– Dimensions are 19 1/2” high, 7” wide<br />
– 3/4" Hose barbs with swivel for easy<br />
installation included, or attach a<br />
3/4" garden hose<br />
MixRite 10 Models to meet your applications<br />
FLOW RANGE .09-11 GPM (.34-41.6 LPM)<br />
OPERATING TEMP. 39F-122 F (4C-50 C) Note: Models 576 and 577 39F-104 F (4C-40C)<br />
Viton O-Rings<br />
Larger check valve with Hastelloy spring and<br />
Viton seals for more viscous products<br />
Viton foot valve with ceramic weight<br />
3/8" I.D. pickup tube<br />
571 574 579IN<br />
MODEL PRESSURE INDUCTION OPTIONS<br />
Ratio Percent Oz/Gal Ml/Liter<br />
570 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .2% to 2% .25 to 2.5 2 to 20 * Tip Kit<br />
571 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .2% to 2% .25 to 2.5 2 to 20 Chemical On/Off * Tip Kit<br />
* Note: With Tip Kit 57-11-1 2000:1 to 750:1 .05% to .13% .06 to .17 .5 to 1.3<br />
572 2.9 - 85 PSI .19-5.8 BAR 250:1 to 25:1 .4% to 4% .51 to 5.0 4 to 40<br />
573 2.9 - 85 PSI .19-5.8 BAR 250:1 to 25:1 .4% to 4% .51 to 5.0 4 to 40 Chemical On/Off<br />
574 2.9 - 60 PSI .19-4.08 BAR 33:1 to 10:1 3% to 10% 3.8 to 12.8 3 to 100<br />
575 2.9 - 60 PSI .19-4.08 BAR 33:1 to 10:1 3% to 10% 3.8 to 12.8 3 to 100 Chemical On/Off<br />
BYPASS<br />
576IN 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .2% to 2% .25 to 2.5 2 to 20 * Tip Kit<br />
577IN 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .2% to 2% .25 to 2.5 2 to 20 Chemical On/Off * Tip Kit<br />
* Note: With Tip Kit 57-11-1 2000:1 to 750:1 .05% to .13% .06 to .17 .5 to 1.3<br />
578IN 2.9 - 85 PSI .19-5.8 BAR 250:1 to 25:1 .4% to 4% .51 to 5.0 4 to 40<br />
579IN 2.9 - 85 PSI .19-5.8 BAR 250:1 to 25:1 .4% to 4% .51 to 5.0 4 to 40 Chemical On/Off<br />
INDUCTION RATIOS ARE BASED ON WATER THIN PRODUCTS (1CPS); HIGHER VISCOSITIES WILL AFFECT INDUCTIONS<br />
18
MixRite Accessories<br />
57-11-1 Tip Kit<br />
for Lean Dilution Ratios<br />
750:1<br />
1000:1<br />
1500:1<br />
2000:1<br />
<strong>Inc</strong>ludes 4 metering tips,<br />
8 ft. 1/4" vinyl hose (not shown) and<br />
1/4"x3/8" barb adapter<br />
MixRite Parts Kits<br />
50-41-1 Strainer<br />
3/4"NPT<br />
200 Mesh (80 Micron) Strainer<br />
recommended on all MixRite installations.<br />
50-42 Replacement Mesh<br />
KIT No.<br />
MODEL<br />
57-1 Cover Kit with on/off 571, 573, 575, 577IN, 579IN<br />
57-2B Engine Repair Kit 570, 571, 572, 573<br />
57-3B (Buna) Chemical Piston Kit 2% 570, 571<br />
57-3V (Viton) Chemical Piston Kit 2% 570, 571<br />
57-4B Cover and Air Release Kit 570, 572, 574, 576IN, 578IN<br />
57-5B Chemical Check Valve Kit Buna *<br />
57-5V* Chemical Check Valve Kit Viton *<br />
57-8B (Buna) Chemical Piston Kit 4% 572, 573<br />
57-8V (Viton) Chemical Piston Kit 4% 572, 573<br />
57-10-65 Mounting Bracket All<br />
57-11-1 Tip Kit 570, 571, 576IN, 577IN<br />
50-41-1 200 Mesh Strainer (80 Micron) All<br />
57-K10-210 Chemical Piston Kit 10% 574, 575<br />
57-K2B-222 Chemical Piston Kit Bypass 2% 576IN, 577IN<br />
57-K4B-244 Chemical Piston Kit Bypass 4% 578IN, 579IN<br />
57-15-V Chemical Inlet Tubing Kit All<br />
57-K02-00S Lip Seal and Piston Kit 2% 570, 571, 576IN, 577IN<br />
57-K04-012 Lip Seal and Piston Kit 4% 572, 573, 578IN, 579IN<br />
57-K10-013 Lip Seal and Piston Kit 10% 574, 575<br />
57-2B-10 Engine Repair Kit 574, 575<br />
57-2B-BP Engine Repair Kit 576IN, 577IN, 578IN, 579IN<br />
50-42 Replacement Mesh for 50-41-1<br />
50-42-1 Tee Adapter All<br />
50-42-1<br />
Tee adapter to induct two chemicals<br />
simultaneously.<br />
* Viton Standard on all Models<br />
19
SPECIALTY APPLICATIONS<br />
Wall Mount FOAM SYSTEM<br />
Compressed Air Foam Systems that include MixRite,<br />
foam chamber, 25' hose, and foam wand. (Wall mount spray<br />
systems also available).<br />
MODEL No. WALL MOUNT INDUCTION<br />
570WS Spray Dispenser .2% to 2%<br />
573WSR Spray Dispenser with Rinse .4% to 4%<br />
573WAFR Compressed Air Foam Dispenser .4% to 4%<br />
579WBAF Compressed Air Foam Dispenser with Chemical Bypass .4% to 4%<br />
All models include dispenser, hose, spray gun or foam wand<br />
Cart Mount<br />
Mobil Cleaning/Sanitizing Systems that include<br />
MixRite, 25' hose and spray gun.<br />
(Mobile Foam systems also available).<br />
MODEL No. CART MOUNT INDUCTION<br />
570CS Spray Dispenser .2% to 2%<br />
573CSR Spray Dispenser with Rinse .4% to 4%<br />
573CAFR Compressed Air Foam Dispenser .4% to 4%<br />
579CBAF Compressed Air Foam Dispenser with Chemical Bypass .4% to 4%<br />
All models include dispenser, hose, spray gun or foam wand<br />
570 VWP-1<br />
VEHICLE WASH PANEL<br />
500:1 to 50:1 ratio (.2%-2%)<br />
Space saving wall mounted Plexiglas panel.<br />
Preplumbed panel for easy installation for<br />
one product induction.<br />
Central Cleaning/Sanitizing<br />
Carwash<br />
• Tire Cleaner<br />
• Presoak<br />
• Drying Agent<br />
Unit includes same as 570VFP less air<br />
regulator, gauge and valve. (See page 21)<br />
* For higher inductions<br />
specify 572 MixRite.<br />
Drop Station<br />
Central Foam Systems can be built using<br />
any MixRite and multiple drop station<br />
dispensers throughout a facility.<br />
20
VEHICLE FOAMING PANEL<br />
Foaming Panel System<br />
570VFP-1 one station<br />
570VFP-3 three station<br />
500:1 to 50:1 ratio (.2%-2%)<br />
Space saving wall mounted Plexiglas panel.<br />
Preplumbed panel for easy installation.<br />
No storage tank needed.<br />
Saves floor space.<br />
Unit includes 570 MixRite*, Inlet ball<br />
valve for strainer maintenance,<br />
200 mesh strainer, Outlet PVC check<br />
valve, 3/4” <strong>DEMA</strong> solenoid valve,<br />
one inlet ball valve per station,<br />
1/2” stainless steel diaphragm valve<br />
and air regulator with pressure gauge.<br />
* For higher inductions<br />
specify 572 MixRite.<br />
570VFP-3<br />
VEHICLE FOAMING PANEL<br />
Car Wash<br />
• Tri-foam<br />
• Tire Cleaner<br />
• Foam Brush<br />
• Presoak<br />
GLOSSARY<br />
CV (Flow Factor)<br />
GPM =<br />
To find the gpm of a valve multiply the rated CV (flow factor)<br />
by the square root of the pressure drop across the valve.<br />
Quantity of 60F/16ºC water in GPM that will<br />
pass through a valve with a PSIG drop of one.<br />
(CV flow factor) X pressure drop across valve<br />
CV Flow Factor= (GPM) —: pressure drop (PSIG)<br />
( )<br />
<strong>Pressure</strong> Drop (PSIG)= GPM 2<br />
CV<br />
Gravity PSI =<br />
.432 x hight (in feet)<br />
Centipoise (CPS), Viscosity of fluid 1 Water<br />
75 10 weight oil<br />
200 30 weight oil<br />
500 Honey<br />
SEAL MATERIAL<br />
GENERALLY RESISTANT TO:<br />
Buna N -40ºF/-40ºC to 250ºF/120ºC oil, grease, hydraulic fluids, water, alcohols<br />
EPDM -60ºF/-50ºC to 300ºF/150ºC animal and vegetable oils, ozone, oxidizing chemicals.<br />
(Not to be used with petroleum based fluids)<br />
Viton -20ºF/-29ºC to 400ºF/205ºC resistant to swelling (citrus based products)<br />
Teflon -75ºF/-60ºC to 450ºF/230ºC extreme temperatures<br />
MOPD<br />
Maximum Operating <strong>Pressure</strong> Differential<br />
Maximum differential against which solenoid<br />
valve can open<br />
MRP<br />
Maximum Rated <strong>Pressure</strong><br />
Maximum pressure which can be applied to the valve<br />
GPM<br />
Gallons per minute flow<br />
PSIG<br />
Pounds per square inch gauge<br />
Nozzle numbering system at 40 PSI First two numbers designate the spray angle<br />
Second two numbers, move decimal left one place<br />
designates the gpm i.e. nozzle number<br />
2540 is 25 degree spray at 4 gpm<br />
METRIC CONVERSIONS:<br />
To go from Multiply by To get<br />
Gallons 3.785 Liters<br />
Ounces 29.57 Milliliters<br />
PSI 0.068 Bar<br />
<strong>Inc</strong>hes 25.4 Millimeters<br />
Fahrenheit 5/9(F-32) Celsius<br />
Liters 0.2642 Gallons<br />
Milliliters .034 Ounces<br />
Bar 14.5 PSI<br />
Millimeters 0.0394 <strong>Inc</strong>hes<br />
Celsius 9/5C+32 Fahrenheit<br />
21
<strong>DEMA</strong><br />
R<br />
<strong>DEMA</strong> Engineering Company<br />
10020 Big Bend Boulevard<br />
St. Louis, Missouri 63122<br />
Telephone: 314-966-3533<br />
800-325-3362<br />
Fax: 314-965-8319<br />
Website: www.demaeng.com<br />
<strong>DEMA</strong> Europe LLC<br />
Mast 25, 3891 KE<br />
Zeewolde, Netherlands<br />
Telephone: 31- (0)-36-522-7006<br />
Fax: 31-(0)-36-522-7863<br />
Website: www.demaeuropa.com<br />
<strong>DEMA</strong> Australia<br />
Unit 5, 7-11 Parraweena Road<br />
Caringbah N.S.W. 2229<br />
Sydney, Australia<br />
Telephone: 61-2-9525-5177<br />
Fax: 61-2-9525-5033<br />
E-Mail: sales@demaust.com<br />
<strong>DEMA</strong> China Representative Office<br />
Room 1317, SIPAI Plaza<br />
103 Cao Bao Road<br />
Shanghai, 200233 P.R. China<br />
Telephone: 86 21-5424 6629<br />
Fax: 86 21 6464 1721<br />
E-Mail: johnzhu@demachina.com.cn<br />
<strong>DEMA</strong> Latin America<br />
Sao Paulo, Brazil<br />
Telephone: 55 11 3906 9813<br />
Fax: 55 11 3906 9813<br />
E-Mail: omarp@demaeng.com<br />
<strong>Cat</strong>alog 2007IND
DISPENSING SYSTEMS <strong>Cat</strong>alog<br />
<strong>DEMA</strong><br />
<strong>DEMA</strong> Engineering Company<br />
R
<strong>DEMA</strong> ENGINEERING COMPANY<br />
<strong>DEMA</strong> ENGINEERING COMPANY is a family owned and operated<br />
designer and manufacturer of fluid control and dispensing equipment<br />
established in 1956. Based in St. Louis, Missouri USA, <strong>DEMA</strong><br />
also has manufacturing and warehouse facilities in Zeewolde,<br />
Netherlands and Sydney, Australia and a Representative Office in<br />
Shanghai, China and Sao Paulo, Brazil.<br />
<strong>DEMA</strong> has been a leading supplier of chemical dispensing<br />
equipment for over 50 years. Our products are used to safely and<br />
accurately blend chemicals and water for a variety of applications,<br />
including housekeeping, food service, food processing,<br />
supermarkets, schools, hospitals and car wash.<br />
The <strong>DEMA</strong> MISSION:<br />
To expand our heritage as<br />
designers and manufacturers<br />
of high quality dispensing<br />
and fluid control products<br />
In 1956 <strong>DEMA</strong> introduced the “proportioner” to the institutional<br />
chemical market and has continually developed products that<br />
keep our customers coming back. <strong>DEMA</strong> produces high quality<br />
products that our customers can rely on with little or no<br />
maintenance.<br />
In 1996 <strong>DEMA</strong> entered the electronic dispensing market with the<br />
introduction of our DrainMaster. Eleven years later our electronic<br />
dispensing line consists of innovative products, including the<br />
TITAN dishwash dispenser, ATLAS on premise laundry dispenser,<br />
and OLYMPIAN mini pump. These products are complemented<br />
by a full range of drain, liquid and solid dishwash and laundry<br />
dispensing systems.<br />
With our current product line, <strong>DEMA</strong> can truly solve all of your<br />
chemical dispensing requirements.<br />
by being the most innovative<br />
company in our industry, providing<br />
quality products with unique<br />
features that meet or exceed the<br />
need of our global customers,<br />
and doing so in a timely manner<br />
at a competitive price.<br />
THE <strong>DEMA</strong> DIFFERENCE: Our goal is to make your buying<br />
experience with <strong>DEMA</strong> a pleasurable one and one that will be<br />
repeated. We are committed to offering the highest level of<br />
both customer and technical service. Our customer service<br />
staff is trained to help you choose the correct equipment<br />
for your application.
1<br />
TABLE OF CONTENTS<br />
2 Food Service Kitchen Dispensers<br />
Wall Mounted <strong>Pumps</strong>, Faucet Proportioners<br />
3 Food Service Kitchen Dispensers<br />
Single and Dual Sink Dispensers, Faucet Adapter Kits, Drain <strong>Pumps</strong><br />
4 Warewash Dispensers<br />
Titan Probe/Probeless Dispensers<br />
5 Warewash Dispensers<br />
Probe and Probeless Models<br />
6 Warewash Dispensers<br />
Olympian Mini <strong>Pumps</strong> and Universal Bowls<br />
7 Solid <strong>Prod</strong>uct Dispensers<br />
Pot and Pan and Solid Laundry Dispensers<br />
8 Warewash Dispenser Parts<br />
Circuit Boards, Tubing, Motors and more<br />
9 Warewash and Laundry Dispenser Parts<br />
Pump Kits, Installation Kits, Laundry Circuit Boards, Handheld Devices,<br />
and Flush Manifolds<br />
10 Laundry Dispensing Systems<br />
844 Liquid LaundryMaster Series, Atlas and Enhanced Digital Select Module<br />
11 Laundry Dispensing Systems<br />
845 <strong>Industrial</strong> LaundryMaster Series, 830 and 840 Timer Series<br />
12 Dilution at Hand Housekeeping Dispensing Systems<br />
Single Station Dilution At Hand Dispensers<br />
13 Dilution at Hand Housekeeping Dispensing Systems<br />
Multi-Station Dispensers and Storage Rack Systems<br />
14 Blend Safe II Housekeeping Dispensing Systems<br />
Enclosed, Locking Systems and Dispensers Only<br />
15 Blend Centers and Blend Safe Dispensing Systems<br />
Single and Multi-Station Dispensers, Stainless Steel Locking Dispensers<br />
16 Blend Center and Blend Safe Parts<br />
17 <strong>Industrial</strong> Dispensing Systems<br />
High Flow Dispensers and Drum Mount Proportioners<br />
18 SprayClean Dispensing Systems<br />
Roam ’n Foam Dispensers<br />
19 SprayClean Dispensing Systems<br />
Select-O-Matic, Mobile Dispensers, Spray Guns, Foam Wands and Hoses<br />
20 Compressed Air Foam Dispensing Systems<br />
Compressed Air Foamers, Foam Wands, Hose End Foamers<br />
21 Compressed Air Foam Dispensing Systems<br />
FoamStation Dispensers, Mobile FoamStation Dispensers<br />
22 MixRite Proportioning <strong>Pumps</strong><br />
Standard and Bypass Models<br />
23 MixRite Foamers and Panel Systems<br />
Wall and Cart Mounted Foaming and Spraying<br />
24 Chemical Injectors and SprayCleans
FOOD SERVICE KITCHEN DISPENSERS<br />
302 Series Hand Pump<br />
Designed to pump 1 or 2<br />
ounces (30 or 60 milliliters)<br />
of detergent, sanitizer, or<br />
other chemical into kitchen<br />
sink, bottle, dry cleaning<br />
machine, or any open<br />
container where chemical<br />
is mixed with water. Each<br />
push delivers 1 or 2 ounces<br />
with the pump automatically<br />
maintaining its prime for<br />
future use.<br />
302-1E<br />
Faucet Mounted Proportioners<br />
<strong>DEMA</strong> Faucet Proportioners attach to any standard faucet<br />
and dispense a chemical and water mixture into the sink by<br />
either pushing a button or sliding a knob. Chemical dilution is<br />
determined by using metering tips on some units and a metering<br />
screw adjustment on others.<br />
Models 151 and 153<br />
Use color coded metering tips to determine dilution ratio<br />
Standard tip kit is 100-15K<br />
Ultra Lean tip kit is 100-15KU<br />
Models 152 and 154<br />
Use metering screw adjustment to determine dilution ratio<br />
Models 153 and 154<br />
<strong>Inc</strong>lude a built in ASSE approved siphon breaker<br />
2<br />
Model 167 and 167T<br />
Uses a slide valve actuator to determine if a chemical solution<br />
is dispensed or water only. Unit is available standard with<br />
metering screw and metering tips.<br />
302-2S-SP<br />
• 1 or 2 ounce pumps available (30 or 60 milliliters)<br />
• Polypropylene body and polyethylene bellows<br />
for chemical resistance<br />
• Epdm, silicone, or viton seals available on check valves<br />
• Chemical does not come in contact with spring<br />
• Mounts on any vertical or horizontal surface<br />
• Optional spout available (part number 30-81-1)<br />
Model 153<br />
MODEL No. FLOW CHECK VALVE SEAL<br />
302-1E 1 ounce (30 ml) epdm<br />
302-1S 1 ounce silicone<br />
302-1V 1 ounce viton<br />
302-2E 2 ounce (60 ml) epdm<br />
302-2S 2 ounce silicone<br />
302-2V 2 ounce viton<br />
Add suffix -SP at end of number for unit to include spout<br />
Example: 302-1E-SP<br />
EPDM seals recommended for detergent use<br />
Silicone seals recommended for chlorine use<br />
Viton seals recommended for solvent use<br />
Model 167<br />
Special adapters available for faucet proportioners<br />
150-9-2 Irregular faucet adapter (uses rubber sleeve and<br />
worm clamp to attach on)<br />
150-21 Inside Aerator Thread Adapter<br />
150-22 Outside Chicago Thread Adapter<br />
150-32 Inside Kohler Thread Adapter
3<br />
FOOD SERVICE KITCHEN DISPENSERS<br />
Single and Dual Sink Dispensers<br />
Model 651GAP or 651AG<br />
Single Sink Dispenser dispenses one product into a kitchen<br />
sink with the turn of a ball valve.<br />
Drain Dispensing Systems<br />
Model 652GAP or 652AG<br />
Dual Sink Dispenser dispenses two products into a kitchen<br />
sink with the turn of a ball valve.<br />
GAP models include:<br />
<strong>DEMA</strong>’s ASSE 1055B approved Action Gap<br />
backflow preventer.<br />
AG models include <strong>DEMA</strong>’s Ultra Gap air gap proportioner<br />
257B<br />
259B<br />
Model 257B and 259B<br />
Automatically feed chemicals into drains and grease traps to<br />
break up grease and detergent buildup and eliminate odors.<br />
Model 257B<br />
Operates on 12VDC plug-in transformer (included) or<br />
2 alkaline lantern batteries<br />
Model 259B<br />
Operates on 12VDC plug-in transformer (included) only<br />
651GAP<br />
Faucet Adapter Kits<br />
652GAP (shown with 68-4<br />
Faucet Adapter Kit)<br />
Model 68-4 Faucet Adapter Kit<br />
Makes installing proportioning equipment over the sink neat<br />
and easy. The kit includes adapters for Chicago, Fisher, and<br />
T & S faucets. A pre-built manifold consisting of a tee, ball<br />
valve, and water hose allows user to control water flow to<br />
sink or dispenser.<br />
Model 68-4-2<br />
<strong>Inc</strong>ludes Fisher adapters only and manifold assembly<br />
Model 68-4-3<br />
<strong>Inc</strong>ludes Chicago adapters only and manifold assembly<br />
Model 68-4-4<br />
<strong>Inc</strong>ludes T & S adapters only and manifold assembly<br />
Model 68-4-7<br />
<strong>Inc</strong>ludes large T & S adapters only and manifold assembly<br />
Model 68-21<br />
T & S Scrap hose sink adapter kit<br />
Model 259BAC<br />
Operates on a 120/230 VAC transformer (no plug-in<br />
connection included)<br />
Features for all units<br />
• 9V battery for memory backup in case of power failure<br />
• <strong>Pumps</strong> once per hour up to 24 hours per day<br />
• Easily programmable dip switches<br />
• External prime switch<br />
• IP-55 watertight case with o-ring seal<br />
Model 259BT<br />
Dispenses chemical into trash bins or dumpsters using the<br />
259 electronics and a misting nozzle. Uses 3-prong, 6 feet<br />
cord (included) wired to transformer inside case. Comes<br />
complete with LPDE tubing and nozzle.<br />
Model 591 Water Diverter<br />
Valve screws on end of<br />
faucet and diverts water to<br />
dispenser by pulling a<br />
plunger while water is on.<br />
591<br />
259BT
WAREWASH DISPENSERS<br />
4<br />
TITAN Warewash Dispensers<br />
Probe and Probeless Operation with Auto-Switchover<br />
<strong>DEMA</strong>’s TITAN range of warewash dispensers was developed<br />
to reduce the number of service calls and create a more<br />
profitable installation at all types of warewash accounts. The<br />
unit can be set up in probe or probeless mode, depending on<br />
the installation requirements. If set up in probe mode, the unit<br />
will automatically switch over to probeless mode if any of the<br />
following parameters are met:<br />
• Shorted probe<br />
• Open probe<br />
• Limed up probe<br />
• Dispenser does not feed for a period of time<br />
• Dispenser over feeds for period of time<br />
Once the parameter is met, the unit will switch itself back to<br />
probe mode. This feature should greatly reduce the number<br />
of service calls and allow better use of service and sales<br />
groups’ time. The TITAN is truly a first of its kind; a dispenser<br />
that will pay for itself.<br />
T-813-DLL<br />
T-812-LL<br />
Quick change pump cover<br />
being removed with no<br />
tools<br />
Features and Benefits continued<br />
<strong>Pumps</strong><br />
• Quick change squeeze tube with no tools required<br />
(patent pending design)<br />
• Quick connect fittings<br />
• Spring loaded 2-roller design for extended tubing life<br />
• 16 ounces per minute with 105 RPM gearmotor<br />
Electronics and Programming Specifications<br />
• Programmable with keypad for quick setup<br />
• Four trigger options<br />
• Pre-wired for quicker installation<br />
• Power supply similar to laptop computer<br />
• Separate trigger board for 24VAC to 480VAC<br />
• Probeless alarms for liquid or dry products<br />
• Diagnostic mode<br />
• Feed rate adjustment adapts to size of machine<br />
• Non-volatile memory allows pre-programming<br />
prior to installation<br />
• Built in rack counter<br />
• Multilingual<br />
• Programmable company information and service<br />
message to personalize dispenser<br />
TITAN ACCESSORIES:<br />
Model 82-23-1 Magnetic Field Sensor<br />
Patent-pending technology to reduce installation time and<br />
create a safer environment for service personnel.<br />
• Eliminate need for direct electrical connection to customer’s<br />
equipment<br />
• Provide electrical isolation from control circuits<br />
• Eliminate need to get into control box on warewash machine<br />
Model 82-28-1 Inductive Probe<br />
Higher technology probe designed so the coils never see<br />
chemical or hard water in the warewash machine, thus making<br />
it a non-service item.<br />
• Significant reduction in probe maintenance<br />
• Temperature compensation built into probe for more<br />
accurate readings<br />
• Helps maintain more accurate detergent concentration<br />
Features and Benefits<br />
Enclosure<br />
• Modular design allows for easy conversion to 3 product<br />
system<br />
• ABS material for durability<br />
• Stainless steel mounting plate for easy wall removal<br />
• Digital display<br />
MODEL NO. NUMBER OF PUMP OR<br />
CHEMICALS SOLENOID VALVE<br />
T-811-L 1 Pump<br />
T-811-D 1 Solenoid Valve<br />
T-812-LL 2 Pump/Pump<br />
T-812-DL 2 Solenoid/Pump<br />
T-813-LLL 3 Pump/Pump/Pump<br />
T-813-DLL 3 Solenoid/Pump/Pump<br />
All models come complete with probe, detergent injection<br />
fitting, rinse injection fitting, mounting plate, and poly tubing
5<br />
WAREWASH DISPENSERS<br />
<strong>DEMA</strong>Master TM Probe Dispensers<br />
<strong>DEMA</strong> offers a complete range of Warewash dispensers<br />
operating with probe technology in 1,2, and 3 pump or solenoid<br />
valve configurations. <strong>DEMA</strong>’s patented probe circuit<br />
technology samples the probe 1/60th of every second , thus<br />
increasing the unit’s probe life by reducing the amount of plating,<br />
corroding or dissolving of the probe tips.<br />
Features for <strong>DEMA</strong>Master Series<br />
• Smooth adjustment on rinse speed control<br />
• Over 2000 hours on gearmotor brush life<br />
• Metal gear box, reduced gearmotor noise<br />
• IP-55 splash proof plastic case<br />
• Stainless steel rinse line check valve (Techtron chlorine<br />
resistant models also available)<br />
• Extended squeeze tubing life<br />
• Rinse delay for up to 12 seconds and rinse limit after<br />
pump has run 18 seconds<br />
MODEL No. NUMBER OF PUMP OR<br />
CHEMICALS SOLENOID<br />
DM-811-L-1T 1 Pump<br />
DM-811-D-1T 1 Solenoid<br />
DM-812-LL-2T 2 Pump/Pump<br />
DM-812-DL-2T 2 Solenoid/Pump<br />
DM-813-LLL-2T 3 Pump/Pump/Pump<br />
DM-813-DLL-2T 3 Solenoid/Pump/Pump<br />
DS-812-LL-2T 2 Pump/Pump<br />
DS-812-DL-2T 2 Solenoid/Pump<br />
DS-813-LLL-2T 3 Pump/Pump/Pump<br />
DS-813-DLL-2T 3 Solenoid/Pump/Pump<br />
DS Models are field convertible between 2 and 3 product<br />
installations. Packaged in a stainless steel case with<br />
enough room for easy retrofitting.<br />
<strong>DEMA</strong>Master TM Probeless Dispensers<br />
DM-812-PDL-2T<br />
DM-811-SC-1T<br />
<strong>DEMA</strong>Master Probeless dispensers function using door<br />
counts, time or speed control to determine the amount of<br />
detergent and rinse put into the dish machine. The unit uses<br />
door openings on a door machine or time on conveyor<br />
machines to determine the amount of detergent. Two banks<br />
of dip switches inside the dispenser allow user to easily program<br />
initial charge and recharge times. When using door<br />
machine mode, dead cycles can be implemented to prevent<br />
unit from adding detergent each cycle.<br />
MODEL No. NUMBER OF PUMP OR<br />
CHEMICALS SOLENOID<br />
DM-811-PL-1T 1 Pump<br />
DM-812-PLL-2T 2 Pump/Pump<br />
DM-812-PDL-2T 2 Solenoid/Pump<br />
DM-813-PLLL-2T 3 Pump/Pump/Pump<br />
DM-813-PDLL-2T 3 Solenoid/Pump/Pump<br />
DS-812-PLL-2T 2 Pump/Pump<br />
DS-812-PDL-2T 2 Solenoid/Pump<br />
DS-813-PLLL-2T 3 Pump/Pump/Pump<br />
DS-813-PDLL-2T 3 Solenoid/Pump/Pump<br />
DS Models are field convertible between 2 and 3 product<br />
installations. Packaged in a stainless steel case with<br />
enough room for easy retrofitting.<br />
DM-811-SC-1T<br />
1 Pump operated by speed control dial only<br />
DM-811-L-1T<br />
DS-813-LLL-2T<br />
DM-812-LL-2T<br />
DJ-812-LL-1T<br />
2 Pump, low cost dispenser for detergent and rinse. Both<br />
products are dispensed during the final rinse cycle and are<br />
controlled by independent speed control dials. Perfect for<br />
single tank machines that fill through the rinse line.<br />
82-1 Low Level Alarm Kit<br />
May be easily added to any <strong>DEMA</strong>Master dispenser that is<br />
pumping liquid products. This versatile, compact system is<br />
used to indicate the absence of liquid products and then uses<br />
an alarm to inform the user that the pail is empty. The circuit<br />
board is powered by 24VAC.
WAREWASH DISPENSERS<br />
Olympian Mini <strong>Pumps</strong><br />
Ideal applications include under-counter washers, glass<br />
washers, and small commercial machines. <strong>Pumps</strong> are color<br />
coded for detergent concentration (red), detergent time<br />
(white), rinse (blue), and sanitizer (yellow).<br />
Specifications<br />
• Dual voltage (110 V and 220 V) or high voltage only<br />
(220V) models<br />
• Mini quick change pump allows tubing replacement<br />
in seconds<br />
• Complete pump assembly removes without tools<br />
• Units programmed via plug in 2 button programmer<br />
Universal Bowls<br />
Universal Bowls dispense solid chemicals or encapsulated<br />
powders into dish machines, sinks, laundry machines, or any<br />
other open reservoir. The 581 Bowl’s flexibility allows it to<br />
be used for solid pot and pan detergent, solid rinse products,<br />
solid laundry products, solid car wash, and other solid<br />
chemicals.<br />
• Mounts on any vertical surface or directly on top of a<br />
dish machine<br />
• Molded plastic vacuum breaker that meets ASSE 1001<br />
(brass siphon breaker available)<br />
• Spray arm with vacuum breaker can be mounted on<br />
either left or right side<br />
• John Guest fittings on vacuum breaker for easy and<br />
secure tubing installation<br />
6<br />
O-CDV<br />
O-PDV<br />
581-WMBH <strong>Inc</strong>ludes wall mounting kit and bulkhead fitting<br />
for dish machine use<br />
581-1T <strong>Inc</strong>ludes bulkhead fitting for dish machine use<br />
581-1W <strong>Inc</strong>ludes wall mounting kit for over a kitchen sink<br />
(no bulkhead fitting)<br />
581-RB Solid Rinse Bowl with solenoid valve and level<br />
control (24VAC standard voltage)<br />
581-RB-4 Solid Rinse Bowl with solenoid valve and level<br />
control (24VDC standard voltage) use with Titan<br />
581-1S Bowl with 24VDC solenoid valve<br />
O-RDV<br />
81-245-1 2 Button Programmer<br />
O-SDV<br />
Model No. Application Color Specifications<br />
O-CDV Detergent Red 110 or 220 volt, concentration<br />
O-CHV Detergent Red 220 volt, concentration<br />
O-PDV Detergent White 110 or 220 volt, time<br />
O-PHV Detergent White 220 volt, time<br />
O-RDV Rinse Blue 110 or 220 volt, speed control<br />
O-RHV Rinse Blue 220 volt, speed control<br />
O-SDV Sanitizer Yellow 110 or 220 volt, speed control<br />
581-WMBH<br />
581-RB
7<br />
SOLID PRODUCT DISPENSERS<br />
Solid <strong>Prod</strong>uct Dispensing Systems<br />
581P-2W Sure-Timer II is a completely enclosed dispensing<br />
system for solid pot and soap, solid presoak, solid floor<br />
cleaner, and solid laundry products.<br />
• Equipment tray attaches to bowl with a plastic nut and is<br />
sealed by an EPDM gasket<br />
• Secure programming method prevents misuse during<br />
operation<br />
• 5 Minute dwell time can be set to prevent continuous<br />
operation<br />
• Eight C size batteries allow over 10,000 cycles due to<br />
latching valve technology<br />
• Solenoid valve can be serviced without removing drip tray<br />
Universal Bowl with Brass<br />
Siphon Breaker<br />
581-1WMBH-B<br />
(see page 6 for features)<br />
581-1RB-B<br />
(see for features)<br />
Model 581A-2W<br />
includes a 110 VAC plug-in<br />
transformer to operate<br />
instead of battery use.<br />
581P-2W<br />
581-1WMBH-B<br />
581KS-1W<br />
Model 581KS-1W Solid<br />
Laundry Dispenser<br />
Is a machined triggered<br />
dispensing system designed<br />
to easily and economically<br />
dispense solid laundry products.<br />
Programming is done<br />
with a removable 2 button<br />
programmer to avoid end<br />
user tampering. Color LED’s<br />
indicate which function is<br />
running (delay, run time and<br />
lock out) and which function<br />
is being programmed with<br />
the 2 button programmer.<br />
• Maximum delay is<br />
20 minutes<br />
• Maximum lock out time is<br />
75 minutes<br />
• Maximum run time is<br />
5 minutes or 40 ounces<br />
581-1BV<br />
Model 581-1BV Manual Bowl Dispenser<br />
Uses a 1/4 turn ball valve to control the water flow to<br />
dispense pot and pan detergent into a kitchen sink. Needle<br />
valve controls chemical concentration by adjusting water<br />
flow. All of the water flow is directed through the vacuum<br />
breaker to meet plumbing codes<br />
Model 581KSI-1W Solid Laundry Dispenser<br />
Operates similar to the 581KS-1W but it includes an injector<br />
mounted below the equipment tray that mixes the diluted<br />
product from the bowl reservoir with water and delivers it up<br />
to 50 feet (15 meters) away from the dispenser.
WAREWASH DISPENSER PARTS<br />
TITAN and <strong>DEMA</strong>Master TM Parts<br />
Circuit Boards<br />
81-118-1 Detergent Circuit Board for Probe Series<br />
Dispensers (DM-812-LL-2T)<br />
81-118-5 Detergent Circuit Board for Probeless Series<br />
Dispensers (DM-812-PLL-2T)<br />
81-118-2 Rinse Speed Control Circuit Board with delay and<br />
limit operation for Probe and Probeless Dispenser Series.<br />
81-118-3 Dual Rinse Speed Control Circuit Board with delay<br />
and limit operation for three product Probe and Probeless<br />
Dispensers where sanitizer pump is used. (DM-813-LLL-2T)<br />
81-205-1 Titan Control Board and Display<br />
81-118-11-3 Titan Trigger Board with One 5-Conductor Cable<br />
Pump Squeeze Tubing<br />
For metric conversion to millimeters see inside back cover of<br />
catalog<br />
25-65CE-11 11" Detergent Squeeze Tube<br />
EPDM (1/2”OD X 1/4" ID)<br />
25-65CE-600 50’ Roll Detergent Squeeze Tubing EPDM<br />
25-65CV-11 11" Detergent Squeeze Tube<br />
Viton (1/2"OD X 1/4" ID)<br />
25-65CN-11 11" Detergent Squeeze Tube<br />
Santoprene (1/2" OD X 1/4" ID)<br />
25-65RE-11 11" Rinse Squeeze Tube EPDM (1/2" OD X 3/16" ID)<br />
25-65RE-600 50’ Roll Rinse Squeeze Tubing EPDM<br />
25-65SE-11 11" Rinse Squeeze Tube EPDM (1/2" OD X 1/8" ID)<br />
25-89CE-14 14" EPDM Squeeze Tube 5/8"OD<br />
25-89CE-600 50’ Roll EPDM Squeeze Tubing 5/8"OD<br />
81-17-1 1 oz. Squeeze Tube Lube<br />
81-17-5 Tube Lube one time use<br />
81-177-1 Quick Change Pump<br />
Detergent Tubing Assembly<br />
(7/16" OD X 1/4" ID, EPDM, 1/4"<br />
Quick Connect Ready)<br />
81-177-2 Quick Change Pump Rinse<br />
Tubing Assembly (3/8" OD<br />
X 1/8" ID, EPDM, 1/4" Quick<br />
Connect Ready)<br />
81-177-3 Quick Change Pump Low<br />
Volume Detergent Tubing<br />
Assembly (3/8" OD X 3/16" ID,<br />
EPDM, 1/4" Connect Ready)<br />
* All Quick Change pump tubes come assembled with fittings<br />
required to connect to John Guest fitting unions.<br />
8<br />
Probes and Fittings<br />
C-12B Detergent Probe<br />
80-55 90 Degree ELL Fitting for Liquid Detergent Connection<br />
58-5 70 Degree ELL Injection Fitting for Bowl Connection<br />
904-8S 1/4” Tube X 1/8” NPT Stainless Steel Check Valve<br />
with Stainless Ball<br />
904-8T 1/4” Tube X 1/8” NPT Stainless Steel Check Valve<br />
with Teflon Ball<br />
904-4S 1/8” Tube X 1/8” NPT Stainless Steel Check Valve<br />
with Stainless Ball<br />
904-4T 1/8” Tube X 1/8” NPT Stainless Steel Check Valve<br />
with Teflon Ball<br />
904-8P 1/4” Tube X 1/8” NPT Techtron Check Valve<br />
(chlorine resistant)<br />
904-4P 1/8” Tube X 1/8” NPT Techtron Check Valve<br />
(chlorine resistant)<br />
Motors and Transformers<br />
80-59-15MK Gearmotor 15 rpm 24 vdc (Metal)<br />
80-59-60MK Gearmotor 60 rpm 24 vdc (Metal)<br />
80-59-105MK Gearmotor 105 rpm 24 vdc (Metal)<br />
81-14-120 Gearmotor 120 rpm 230 vac (Metal)<br />
81-13-100 Gearmotor 100 rpm 120 vac (Metal)<br />
81-13-120 Gearmotor 120 rpm 120 vac (Metal)<br />
80-70 40VA Transformer<br />
80-70-460 40VA Transformer 460 vac to 24 vac<br />
81-13-115 Gearmotor 115 rpm 115 vac (Metal)<br />
81-14-230 Gearmotor 115 rpm 230 vac (Metal)<br />
81-15-115 Gearmotor 60 rpm 115 vac (Metal)<br />
Solenoid Valves<br />
442J-WW-4B Brass Solenoid Valve with cover and bracket<br />
P442J-WW-4 Celcon Solenoid Valve with cover and bracket<br />
C-12B 80-55<br />
58-5<br />
Miscellaneous Parts<br />
58-2 ASSE 1001 Approved Plastic<br />
Siphon Breaker with Fittings<br />
81-53 Test Kit<br />
25-68-20 20’ Poly Tubing 1/4” OD<br />
80-66 10” Pick Up Tube 1/4” ID<br />
80-66-2 18” Pick Up Tube 1/4” ID<br />
58-2<br />
904-8S 904-8P 442J-WW-4B<br />
81-53<br />
25-68-20<br />
80-59-15
9<br />
WAREWASH AND LAUNDRY DISPENSER PARTS<br />
Pump Head Kits<br />
84-65-1<br />
AC Laundry<br />
Conversion Kit<br />
Quick Change Pump with cover off<br />
Quick Change Pump<br />
81-118-15 Detergent Pump Kit-2 Roller Spring Loaded<br />
81-118-16 Rinse Pump Head Kit-3 Roller Fixed<br />
81-118-17 Detergent Pump Kit-2 Roller Fixed<br />
Hand Held Laundry Programming<br />
Devices and Cables<br />
84-65-24 Enhanced Digital Select Module (EDSM)<br />
84-65-31 Universal Select Module for use with<br />
Atlas (20 formulas) and<br />
LaundryMaster (9 formulas) systems<br />
84-27-3 25 feet RJ-45 Cable<br />
84-27-4 6 feet RJ-45 Cable<br />
25-C2<br />
25--130-1<br />
C2 and C4 Pump<br />
25-C2 Tri-Roller Rinse Pump Complete<br />
25-C2D Dual Roller Detergent Pump Complete<br />
25-130-1 Large Pump Kit Complete<br />
Installation Kits<br />
for all LaundryMaster Dispensers:<br />
<strong>Inc</strong>ludes 20' LDPE tubing, tie wraps, and one 18" pickup tube<br />
per pump<br />
85-15-3 Three Pump Installation Kit<br />
85-15-4 Four Pump Installation Kit<br />
85-15-5 Five Pump Installation Kit<br />
85-15-6 Six Pump Installation Kit<br />
Laundry Dispenser Circuit Boards and<br />
Power Supply<br />
84-65-28 IQ-85 Circuit Board for 844P Atlas<br />
84-65-2 IQ-80 Circuit Board<br />
84-65-22 DC Relay Circuit Board<br />
84-65-1 AC Laundry Conversion Kit<br />
84-65-6 Signal Transfer Unit (STU)<br />
84-65-9 Power Supply<br />
84-65-24 EDSM<br />
84-65-31 USM<br />
950 Flush Manifold Series<br />
950 Flush Manifold dilutes concentrated product with water<br />
and delivers chemical solution to laundry machine in a safe<br />
and efficient manner. Flush manifold comes complete with<br />
solenoid valve, pressure switch, and up to six chemical inlets.<br />
Chemical inlets are either 1/4” barb or compression or<br />
3/8” barb or compression. Units can be easily field converted<br />
from one connection to another.<br />
MODEL No. FITTING SIZE<br />
950-1B Barb 1/4”<br />
950-1C Compression 1/4”<br />
950-2B Barb 3/8”<br />
950-2C Compression 3/8”<br />
Flush Manifold<br />
Mounting Kit,<br />
Part number 84-65-10,<br />
allows flush manifold<br />
to be mounted directly<br />
to 844 series<br />
LaundryMaster<br />
950-2B
LAUNDRY DISPENSERS<br />
844 LaundryMaster TM Series<br />
844 LaundryMaster with Enhanced Digital Select Module<br />
(EDSM)<br />
Liquid Laundry Dispensers can be equipped with 3,4,5, or 6<br />
pumps and supplied with <strong>DEMA</strong>’s Enhanced Digital Select<br />
Module (EDSM) or Universal Select Module (USM),<br />
a 9 formula keypad.<br />
Features for the LaundryMaster series<br />
• Dual chemical injections per formula<br />
• Low voltage wiring into dispenser<br />
• Quick change peristaltic pumps for easy and fast<br />
tubing replacement<br />
• RJ45 data communication connections<br />
• 80VA transformer on fused power supply board<br />
for additional safety<br />
• Main circuit board Is 24VAC<br />
Features for Enhanced Digital Select Module (EDSM)<br />
• Stores up to 20 formulas and can program any<br />
number of dispensers<br />
• Easy and quick programming done at convenient location<br />
• Multi-language programming<br />
• Password protected<br />
• Non-volatile memory stores programming<br />
Operating Function Modes:<br />
AUTO FORMULA SELECT: Allows laundry machine<br />
microprocessor to choose formula soil classification by<br />
sending an appropriate length signal to main control board.<br />
Control board has 9 formula memory.<br />
RELAY: Allows sophisticated laundry machine microprocessors<br />
to control all functions of the dispenser. Will accept<br />
any number of programs sent by the laundry machine<br />
microprocessor.<br />
SEQUENCE: Used on non-programmable, fixed time, and<br />
older machines that do not have adequate programming<br />
functions. Operates by counting drain closings and pumping<br />
pre-determined amounts of product at correct drain closing.<br />
Control board has 9 formula memory.<br />
MANUAL FORMULA SELECT: 9 formula keypads allow<br />
non-microprocessor laundry machines to have specific<br />
formulas for various soil classifications. Both keypads<br />
have bleach defeat and emergency stop buttons.<br />
84-65-24 EDSM<br />
844-4OBBBO<br />
844P Atlas Laundry in Plastic Enclosure<br />
All the same electronic, programming, and pump features as<br />
the LaundryMaster but packaged in <strong>DEMA</strong>’s newest plastic<br />
enclosure. High voltage is isolated in separate compartment for<br />
installation ease and safety. Modular design allows for easy<br />
addition of pump stations, with up to 6 pumps per dispenser.<br />
844P-4JJJJ<br />
All 844P models can be purchased with a 20 formula select<br />
module (USM) in lieu of Enhanced Digital Select Module (EDSM.)<br />
(Note: An Enhanced Digital Select Module (EDSM) will be<br />
required for programming dispenser.)<br />
MODEL No. NUMBER OF ENCLOSURE KEYPAD<br />
PUMPS<br />
MODULE<br />
844P-3JJJ 3 Plastic None<br />
844P-3JJJ-E 3 Plastic EDSM<br />
844P-3JJJ-U 3 Plastic 20 Formula<br />
844E-3JJJ-U 3 Stainless 9 Formula<br />
844P-4JJJJ 4 Plastic None<br />
844P-4JJJJ-E 4 Plastic EDSM<br />
844P-4JJJJ-U 4 Plastic 20 Formula<br />
844E-4JJJJ-U 4 Stainless 9 Formula<br />
844P-5JJJJJ 5 Plastic None<br />
844P-5JJJJJ-E 5 Plastic EDSM<br />
844P-5JJJJJ-U 5 Plastic 20 Formula<br />
844E-5JJJJJ-U 5 Stainless 9 Formula<br />
844P-6JJJJJJ 6 Plastic None<br />
844P-6JJJJJJ-E 6 Plastic EDSM<br />
844P-6JJJJJJ-U 6 Plastic 20 Formula<br />
844E-6JJJJJJ-U 6 Stainless 9 Formula<br />
Relay Only LaundryMaster<br />
Dispenser accepts signals from programmable laundry machine<br />
and pumps product for that set time. All programming is done<br />
at laundry machine. Relay Only Dispenser allows for a less<br />
expensive installation when dispenser programming is not<br />
required. (Only available in stainless steel enclosure).<br />
844R-4OBBBBO 4 pump dispenser<br />
844R-5BBBBBO 5 pump dispenser<br />
844R-5DBBBBO 5 pump dispenser<br />
844R-6BBBBBB 6 pump dispenser<br />
844R-6DBBBBD 6 pump dispenser<br />
* B designates 10 ounce per minute pump<br />
* D designates 40 ounce per minute pump<br />
10
11<br />
LAUNDRY DISPENSERS<br />
• 6 oz/180 ml per minute low maintenance peristaltic pump<br />
• One dispenser has the ability to feed two machines<br />
• Stackable pump head kits allow for easy field conversion<br />
from 2 to 4 products<br />
• ABS enclosure with water tight seal<br />
845-6DDDDDD<br />
845 and 846 <strong>Industrial</strong><br />
LaundryMaster TM Dispensers<br />
845 and 846 <strong>Industrial</strong> Laundry Dispensers use the same<br />
dependable electronics as the 844 LaundryMaster but the<br />
large case design will accommodate 3,4,5, or 6 of <strong>DEMA</strong>’s<br />
large 40 ounce per minute (1200 milliliters/minute) peristaltic<br />
pumps. All pumps are mounted on the front of a stainless<br />
steel cabinet.<br />
845 Series supplied with DC Motors<br />
846 Series supplied with AC Motors<br />
Special Models with no electronics<br />
846-6NE115<br />
6 pump AC Dispenser with no electronics (115VAC)<br />
846-6NE230<br />
6 pump AC Dispenser with no electronics (230VAC)<br />
830K-1-1 Single <strong>Prod</strong>uct Liquid Laundry with 60 RPM motor<br />
and Installation kit<br />
830K-1-2 Single <strong>Prod</strong>uct Liquid Laundry with 105 RPM motor<br />
and Installation kit<br />
831K-1-1 Two <strong>Prod</strong>uct Liquid Laundry with 60 RPM motors<br />
and Installation kit<br />
831K-1-5 Three <strong>Prod</strong>uct Liquid Laundry with 60 RPM motors<br />
and Installation kit<br />
831K-1-7 Four <strong>Prod</strong>uct Liquid Laundry with 60 RPM motors<br />
and Installation kit<br />
• If installation kit is not desired, leave letter<br />
“K” off of part number<br />
83-R1 One button remote start switch for 830 series dispensers.<br />
83-R2 Two button remote start switch for 830 series dispensers.<br />
MODEL No. NUMBER OF KEYPAD<br />
PUMPS SELECTION<br />
845-4ODDDDO 4 None<br />
845-4ODDDDO-9F 4 9 Formula<br />
845-5DDDDDO 5 None<br />
845-5DDDDDO-9F 5 9 Formula<br />
845-6DDDDDD 6 None<br />
845-6DDDDDD-9F 6 9 Formula<br />
REPLACE 845 WITH 846 FOR AC MOTOR MODEL NUMBER<br />
830 and 840 Series Single and<br />
Multi-<strong>Prod</strong>uct Laundry Systems<br />
830 and 840 Series<br />
LaundryMaster dispensers<br />
are designed to dispense 1 or<br />
2 products into top loading,<br />
coin-op, and other laundry<br />
machines up to 50 pounds/25<br />
kilograms capacity. <strong>Pumps</strong> are<br />
triggered by a signal from the<br />
laundry machine or by pushing<br />
start button.<br />
830K-1-1<br />
840S-J<br />
840 Series<br />
• Removable Key pad performs all programming<br />
• Colored LED’s indicate function in use<br />
• Optional bleach pump available<br />
• Pump volume is 8 ounces per minute<br />
• Optional magnetic field sensors available to eliminate<br />
high voltage wiring<br />
840S-J One product (detergent)<br />
840BS-JJ Two products (detergent and bleach) pumped together<br />
81-245-1 2 button programmer required for programming only
HOUSEKEEPING DISPENSERS<br />
12<br />
Dilution at Hand TM Dispensing System<br />
Dilution at Hand dispensers offer the convenience of filling<br />
spray bottles with one hand and the option of filling a bucket<br />
or scrubber with on/off control at the end of hose where<br />
operator is filling. These unique features, along with the<br />
traditional lever controlled actuation , make Dilution at Hand<br />
a truly revolutionary dispenser.<br />
FILL SPRAY BOTTLES WITH ONE HAND: <strong>DEMA</strong>’s Dilution at<br />
Hand valve design incorporates many of the positive features<br />
used with the successful 633 valve but turns the valve around<br />
180 degrees for a smooth upward movement when the spray<br />
bottle pushes lever.<br />
REMOTE FILL AT DISPENSING POINT: Dilution at Hand’s<br />
patented remote filling option uses a hand held gun operating<br />
as a pilot valve back to water valve for easy on/off control<br />
at the end of hose where operator is filling. There are no<br />
moving parts, just water being moved from the water valve to<br />
the gun and back. Now, instead of moving your bucket or<br />
scrubber to the dispenser, take the dispenser to your point of<br />
use using the remote fill option.<br />
Dilution at Hand offers both 1 and 4 gallon per minute<br />
proportioners, Action Gap backflow or Air Gaps, and<br />
Dial-A-Blend capability. A dispenser can be built to<br />
meet any desired application.<br />
ONE HAND FILL<br />
702GAP-RF<br />
Single Station Options<br />
Note: All models listed are shipped with <strong>DEMA</strong>’s ASSE 1055B<br />
approved Action Gap backflow preventer. Replace the letters<br />
GAP with AG to include an Air Gap proportioner instead of<br />
Action Gap.<br />
709GAP<br />
701GAP<br />
1 GPM Bottle Fill (4 liters/minute)<br />
MODEL No. ACTIVATION METHOD NUMBER OF CHEMICAL PRODUCTS<br />
701GAP Bottle or Button Activated One Chemical<br />
703GAP Bottle or Button Activated Four Chemical Dial-A-Blend<br />
705GAP Bottle or Button Activated One Chemical at Four Dilutions<br />
707GAP Bottle Activated Only One Chemical<br />
709GAP Bottle Activated Only Four Chemical Dial-A-Blend<br />
4 GPM Bucket Fill (16 liters/minute)<br />
MODEL No. ACTIVATION METHOD NUMBER OF CHEMICAL PRODUCTS<br />
702GAP Button Activated One Chemical<br />
702GAP-RF Remote Fill Activated One Chemical<br />
704GAP Button Activated Four Chemical Dial-A-Blend<br />
704GAP-RF Remote Fill Activated Four Chemical Dial-A-Blend<br />
706GAP Button Activated One Chemical at Four Dilutions<br />
706GAP-RF Remote Fill Activated One chemical at Four Dilutions<br />
REMOTE FILL
13<br />
HOUSEKEEPING DISPENSERS<br />
Dilution at Hand TM Dispensing System<br />
Multi Station Units<br />
Dilution at Hand Dispensers may be built to meet any<br />
dispensing requirement. <strong>DEMA</strong> has several factory built<br />
multi-station units set up or can build a special unit to<br />
meet your requirements. (Minimum order required for<br />
factory built special units)<br />
Note: All models listed are shipped with <strong>DEMA</strong>’s ASSE 1055B<br />
approved Action Gap backflow preventer. Replace the letters<br />
GAP with AG to include an Air Gap proportioner instead of<br />
Action Gap.<br />
Multi Station Units With Single<br />
<strong>Prod</strong>uct Proportioners<br />
MODEL LEFT STATION RIGHT STATION<br />
FLOW AND ACTIVATION FLOW AND ACTIVATION<br />
720GAP Bottle or Button Activated Bottle or Button Activated<br />
1 GPM (4 liters/minute) 1 GPM (4 liters/minute)<br />
721GAP Bottle Activated Bottle Activated<br />
1 GPM (4 liters/minute) 1 GPM (4 liters/minute)<br />
722GAP Button Activated Bottle or Button Activated<br />
4 GPM (16 liters/minute) 1 GPM (4 liters/minute)<br />
722GAP-RF Remote Fill Activated Bottle or Button Activated<br />
4 GPM (16 liters/minute) 1 GPM (4 liters/minute)<br />
724GAP Button Activated Button Activated<br />
4 GPM (16 liters/minute) 4 GPM (16 liters/minute)<br />
724GAP-RF Remote Fill Activated Remote Fill Activated<br />
4 GPM (16 liters/minute) 4 GPM (16 liters/minute)<br />
Multi Station Dispensers with<br />
Dial-A-Blend Proportioners<br />
MODEL LEFT STATION RIGHT STATION<br />
FLOW AND ACTIVATION FLOW AND ACTIVATION<br />
730GAP Button Activated Bottle or Button Activated<br />
4 GPM (16 liters/minute) 1 GPM (4 liters/minute)<br />
4 <strong>Prod</strong>uct Dial-A-Blend<br />
730GAP-RF Remote Fill Activated Bottle or Button Activated<br />
4 GPM (16 liters/minute) 1 GPM (4 liters/minute)<br />
4 <strong>Prod</strong>uct Dial-A-Blend<br />
731GAP Button Activated Bottle or Button Activated<br />
4 GPM (16 liters/minute) 1 GPM (4 liters/minute)<br />
4 <strong>Prod</strong>uct Dial-A-Blend 4 <strong>Prod</strong>uct Dial-A-Blend<br />
731GAP-RF Remote Fill Activated Bottle or Button Activated<br />
4 GPM (16 liters/minute) 1 GPM (4 liters/minute)<br />
4 <strong>Prod</strong>uct Dial-A-Blend 4 <strong>Prod</strong>uct Dial-A-Blend<br />
722GAP-RF<br />
Dilution at Hand Rack Options<br />
Dilution at Hand Dispensers mounted to chemical storage<br />
racks. These dispensers offer a complete system keeping<br />
chemical containers off the ground in a safe manner and a<br />
drip tray mounted to the rack. Single and four station racks<br />
are available standard. Custom racks with various stations<br />
and sizes can be made if minimum lot sizes are met.<br />
701GAP-RACK:<br />
One gallon bottle rack with 701GAP dispenser attached.<br />
702GAP-RACK:<br />
One gallon bottle rack with 702GAP dispenser attached.<br />
702GAP-RF-RACK:<br />
One gallon bottle rack with 702GAP-RF dispenser attached.<br />
730GAP-RACK:<br />
Four gallon bottle rack with 730GAP dispenser attached.<br />
730GAP-RF-RACK:<br />
Four gallon bottle rack with 730GAP-RF dispenser attached.<br />
731GAP-RACK:<br />
Four gallon bottle rack with 731GAP dispenser attached.<br />
731GAP-RF-RACK:<br />
Four gallon bottle rack with 731GAP-RF dispenser attached.<br />
701GAP-RACK<br />
730GAP<br />
6.5" W X 20" H X 7" D on 701GAP-RACK<br />
25" W X 20" H X 7.5" D on 731GAP-RF-RACK<br />
731GAP-RF-RACK
HOUSEKEEPING DISPENSERS<br />
Blend Safe II Dispensing System<br />
14<br />
Blend Safe II is a modular, locking dispensing system that<br />
allows user to dispense chemicals safely, control dispenser<br />
inventory, and have the flexibility in the field to meet changing<br />
requirements at different accounts.<br />
• Locking cabinets molded in durable Polypropylene<br />
• Removable drip tray<br />
• Units are held together with easy to use clips<br />
• Locking cabinets can be mounted on a vertical or<br />
horizontal plane<br />
• Cabinet accommodates various bottle sizes (up to 5 liters)<br />
MODEL NUMBERS: All model numbers listed below include<br />
<strong>DEMA</strong>’s Action Gap backflow preventer. Specify the letters<br />
AG instead of GAP if <strong>DEMA</strong>’s Ultra Gap Air Gap proportioner<br />
is preferred.<br />
Last suffix number designation:<br />
1 is 1 gallon per minute flow (4 liters/minute)<br />
4 is 4 gallon per minute flow (16 liters/minute)<br />
662-GAP-1<br />
662-4GAP-1114-2<br />
1 Station<br />
662-GAP-1 (1gpm)<br />
662-GAP-4 (4gpm)<br />
2 Station-one dual button cabinet<br />
662-2GAPDB-11<br />
662-2GAPDB-14<br />
662-2GAPDB-44<br />
2 Station-two single button cabinets<br />
662-2GAP-11<br />
662-2GAP-14<br />
662-2GAP-44<br />
3 Station<br />
662-3GAP-1<br />
662-3GAP-114<br />
662-3GAP-144<br />
4 Station-two dual button cabinets<br />
662-4GAP-1111-2<br />
662-4GAP-1114-2<br />
662-4GAP-1144-2<br />
4 Station-four single button cabinets<br />
662-4GAP-1111-4<br />
662-4GAP-1114-4<br />
662-4GAP-1144-4<br />
Dial-A-Blend<br />
662-639GAP (4 products @ 1gpm, 1 product @ 4gpm)<br />
662-637GAP-1 (4 products @ 1gpm)<br />
662-637GAP-4 (4 products @ 4gpm)<br />
662-635GAP-4 (1 product @ four dilutions 4gpm)<br />
Dispenser Only<br />
(No locking cabinets included<br />
in the part numbers below)<br />
66-144GAP-1<br />
66-146GAP-1<br />
66-148GAP-1<br />
66-148GAP-2<br />
66-149GAP-2<br />
66-150GAP-1<br />
66-150GAP-2<br />
66-151GAP<br />
66-151GAP-2<br />
662-639GAP<br />
(cabinets shown vertical)<br />
One button top – 1gpm (4 liters/minute)<br />
One button top – 4gpm (16 liters/minute)<br />
Two button top – 1gpm/1gpm<br />
Two button top – 1gpm/4gpm<br />
1 product @ four dilutions 4gpm<br />
4 products @ 1gpm<br />
4 products @ 4gpm<br />
4 products @ 1gpm and 1 product @ 4gpm<br />
4 products @ 1gpm and 4 products @ 4gpm<br />
66-148GAP-2<br />
66-151GAP-2
15<br />
HOUSEKEEPING DISPENSERS<br />
Blend Centers and Blend Safe<br />
Dispensers<br />
Blend Centers and Blend Safe dispensers use <strong>DEMA</strong>’s<br />
modular 633 valve body to create the dispenser needed<br />
for any field installation. Choose from single button plastic<br />
units, multi station stainless steel units or the lockable<br />
661 stainless steel series.<br />
633 Series Plastic Blend Center’s modular design lets you<br />
easily couple together any number of stations to create a<br />
system that meets your specific needs. Mix and match both<br />
high and low flow units for filling spray bottles, buckets,<br />
sinks, and other reservoirs. Choose from blue, red, green,<br />
yellow, black, or white buttons.<br />
MODEL NUMBERS: All model numbers listed below include<br />
<strong>DEMA</strong>’s Action Gap backflow preventer. Specify the letters<br />
AG instead of GAP if <strong>DEMA</strong>’s Ultra Gap Air Gap proportioner<br />
is preferred.<br />
681 Series Stainless Steel and Plastic Cover<br />
Blend Centers<br />
Models listed below include 4 gpm (16 liters/minute)<br />
proportioners. All models can be ordered with any<br />
combination of 1 or 4 gpm (4 or 16 liters/minute) proportioners.<br />
Contact Customer Service for additional model numbers.<br />
STATION MODEL No. COVER MATERIAL<br />
1 681GAP-1 Stainless Steel<br />
2 681GAP-2 Stainless Steel<br />
2 681GAP-2P Plastic<br />
3 681GAP-3 Stainless Steel<br />
3 681GAP-3P Plastic<br />
4 681GAP-4 Stainless Steel<br />
5 681GAP-5 Stainless Steel<br />
Model 633GAP-1<br />
Action Gap backflow with 1 gpm (4 liters/minute) proportioner<br />
Model 633GAP-4<br />
Action Gap backflow with 4 gpm (16 liters/minute) proportioner<br />
681GAP-2<br />
681GAP-3P<br />
3 MODEL 633GAP UNITS SHOWN COUPLED TOGETHER<br />
633GAP-B1<br />
661 Series Lockable Stainless Steel Dispensers<br />
Offer safety and security when it is necessary for gallon<br />
bottles to be self contained inside the dispenser.<br />
Units are lightweight and have a mounting flange outside<br />
the dispenser for easy installation.<br />
Model 661GAPB one station (1 gpm) with Action Gap<br />
backflow preventer<br />
Model 661GAPDB one station with two buttons (1 gpm and<br />
4 gpm) with Action Gap backflow preventer<br />
Model 661GAP-4 four station with Action Gap backflow<br />
preventer (standard configuration is three 1 gpm proportioners<br />
and one 4 gpm proportioner)<br />
Model 661GAPS-4 four station with Action Gap backflow<br />
preventer and stainless steel drip tray<br />
661GAP-4<br />
661GAPDB
HOUSEKEEPING DISPENSERS<br />
16<br />
Accessories and Spare Parts<br />
44-3N-6 66-43<br />
44-3N-6<br />
Six feet (2 meters)<br />
nylon braided hose<br />
44-3-6<br />
Six feet (2 meters)<br />
black hose<br />
66-43<br />
<strong>Pressure</strong> regulator<br />
(40 psi / 2.5 bar) with<br />
GHT connections<br />
68-6<br />
60-54<br />
68-6<br />
<strong>Pressure</strong> Indicating Tee<br />
with Garden Hose Threads<br />
To meet various municipal plumbing<br />
codes for backflow prevention<br />
68-6QD1<br />
<strong>Pressure</strong> Indicating Tee<br />
with Male Quick Disconnect<br />
68-6QD2<br />
<strong>Pressure</strong> Indicating Tee<br />
with Male and Female Quick<br />
Disconnect<br />
100-16E<br />
100-16E<br />
1/4" and 3/8" Diaphragm foot<br />
valve with EP seal<br />
100-16S<br />
1/4" and 3/8" Diaphragm foot<br />
valve with silicone seal<br />
100-16V<br />
1/4" and 3/8" Diaphragm foot<br />
valve with viton seal<br />
60-54<br />
1/4" in line check valve<br />
100-12<br />
Eight feet 1/4"<br />
ID inlet tubing<br />
61-21<br />
Six feet 1/2" ID outlet tubing for<br />
Action Gap backflow preventer<br />
and proportioner<br />
63-83<br />
Six feet 9/16" ID outlet tubing<br />
for Air Gap proportioner<br />
16-30 with 61-22-3<br />
16-30<br />
Action Gap backflow<br />
preventer<br />
61-22-3<br />
Four gpm proportioner<br />
61-99-2<br />
One gpm proportioner<br />
61-22-3BAG<br />
61-22-3BAG<br />
Four gpm air gap<br />
proportioner<br />
61-32BAG<br />
One gpm air gap<br />
proportioner<br />
Racks for Chemical Bottle Storage<br />
930-1R One station non locking rack for round bottles<br />
930-1F One station non locking rack for F-style bottles<br />
931-2 Two station locking rack<br />
930 Three station non locking rack<br />
931 Three station locking rack<br />
100-15K<br />
100-15KU<br />
930-1F 931-2<br />
7 5/8"x4 3/8" 13 1/2"x6 1/2"<br />
100-15K Tip kit<br />
100-15KU Ultra lean tip kit<br />
44-61P Capillary metering tip for lean dilutions<br />
930<br />
19 1/2"x7 7/16"<br />
931<br />
19 1/2"x6 1/2"
17<br />
INDUSTRIAL DISPENSERS<br />
High Flow Dispensers<br />
Model 607-3 High Flow Dispenser fills Auto Scrubbers and<br />
other large reservoirs at 10 gallons per minute (40 liters per<br />
minute) to reduce fill time.<br />
• 10 gpm flow rate at 40 psi (3/4” or larger water supply<br />
required)<br />
• Vacuum breaker installed<br />
• 6 feet discharge hose<br />
• Metering tips determine dilution ratio<br />
• Stainless steel cover offers durability and industrial<br />
appearance<br />
• PVC proportioner allows dual chemical injection<br />
607-3<br />
Drum Mount Dispensers<br />
Model 161 and 162 Series drum mount dispensers mount to<br />
any 2 1/2” bung opening to dispense chemical solution<br />
directly from the drum or tote at the correct dilution. Various<br />
models are available to meet standard and high induction<br />
applications.<br />
Model 162 Standard model dispenses 5 gpm (20 liters per<br />
minute) with maximum induction of 5-1, metering screw<br />
adjustment<br />
Model 162-3 Standard model dispenses 5 gpm with a<br />
maximum induction of 5-1, metering tip adjustment<br />
Model 161 High induction model dispenses 5 gpm with a<br />
maximum induction of 1.5-1, brass construction with metering<br />
screw adjustment.<br />
Model 162HC High induction model dispenses 1/2 gallon per<br />
minute (2 liters per minute) with a maximum induction of more<br />
than 1-1 ratio. Ideal dispenser for applications such as<br />
antifreeze mixing where more product than water is required.<br />
Model 162HCGHT Allows up to 50 feet (15 meters) of outlet<br />
hose to be attached and the use of a spray gun or foam wand.<br />
Unit is capable of drawing a 4-1 dilution ratio. Comes<br />
complete with a 25 feet (8 meters) nylon braided outlet hose<br />
and spray gun. Ideal unit for the spraying of asphalt release<br />
agents on truck beds.<br />
Model 162HDM-2<br />
High Flow Drum Mount Proportioner mounts directly to a<br />
2 1/2” bung opening on a drum or tote and dispenses at<br />
10 gallons per minute (40 liters per minute).<br />
• 10 gpm flow rate at 40 psi<br />
• Draws up to 12 ounces per gallon chemical solution<br />
• Discharge hose can be up to 25 feet (8 meters) long<br />
• Shutoff valve (<strong>DEMA</strong> #90-15) can be put at end of hose<br />
for on/off control<br />
• Metering tips determine dilution ratio 162<br />
162HC<br />
162HDM-2<br />
162HCGHT
SPRAY CLEAN DISPENSERS<br />
18<br />
Roam ’n Foam Spray and Foam Dispenser<br />
Effective cleaning and sanitizing<br />
• Supermarket meat room, seafood, and bakery<br />
departments<br />
• Kitchens and food preparation areas<br />
• Locker rooms and showers in schools and<br />
health clubs<br />
• Food processing and packaging plants<br />
Detachable molded<br />
foam wand slides into<br />
dispenser when not<br />
being used.<br />
Innovative Features and Benefits<br />
• Patent pending single knob to control water flow<br />
and chemical selection<br />
— Full water flow when valve opens<br />
— Accurate dilutions<br />
— Eliminates confusion<br />
— Prevents mixing of chemicals<br />
• Removable Injector<br />
— 3 flow rates to choose from<br />
— Easy maintenance and replacement<br />
• Built in foam wand hanger<br />
— Helps prevent foam wand loss or damage<br />
625RNF-3<br />
Specifications<br />
• Dimension<br />
9 1/2"W x 11 1/2"H x 4" W<br />
(240 mm x 292 mm x 102 mm)<br />
• Injector Flow Rate<br />
2.5, 3 and 3.5 gallons per minute<br />
(9.5, 11.5 and 13.5 liters per minute)<br />
• Operating Range<br />
20-125 psi (1.3 - 8.6 bar)<br />
• Water temperature up to<br />
160°F (71°C)<br />
• Functions with up to 50 feet<br />
(15 meters) of 1/2" (13 mm) ID hose<br />
• Built in hose hanger<br />
• Polypropylene components<br />
MODEL NUMBERS AND KITS<br />
625RNF<br />
Dispenser only<br />
625RNF-2<br />
Dispenser with 44-3RG red outlet hose, 44-3-6 black inlet hose, and<br />
40-14QD/292QD spray gun / foam wand kit<br />
625RNF-3<br />
Dispenser with 44-3RG red outlet hose, 44-3-6 black inlet hose,<br />
28-1QD spray gun and 292GQD foam wand<br />
625RNF-4<br />
Dispenser with 44-3RG red outlet hose, 44-3-6 black inlet hose, 40-14QD/<br />
292QD spray gun / foam wand kit and 44-89-112 backflow preventer<br />
625RNF-5<br />
Dispenser with 44-3RG red outlet hose, 44-3-6 black inlet hose,<br />
28-1QD spray gun, 292GQD foam wand and 44-89-112 backflow preventer<br />
ACCESSORIES<br />
44-3RG<br />
25 feet (8 meters) red hose<br />
44-3N-25<br />
25 feet (8 meters) clear nylon braided hose<br />
44-3-6 6 feet (2 meters) black hose<br />
44-3N-6<br />
6 feet (2 meters) clear nylon braided hose<br />
40-14QD/292QD Ball valve activated spray gun with quick connect foam wand<br />
28-1QD<br />
Lever controlled spray gun with quick connect nozzle<br />
292GQD<br />
Quick connect foam wand<br />
44-89-112 ASSE 1012 approved constant pressure backflow preventer<br />
44-111-1560 Brass nozzle with quick connect groove<br />
44-111-1560SS Stainless steel nozzle with quick connect groove<br />
Additional hoses, spray guns, foam wands, nozzles, and other accessories available<br />
through <strong>DEMA</strong> Customer Service
19<br />
SPRAY CLEAN DISPENSERS<br />
SprayClean Accessories<br />
<strong>DEMA</strong> manufactures a variety of SprayClean dispensers to<br />
meet different cleaning environments. Whether it’s a wall<br />
mounted unit for cleaning one area or a mobile unit that offers<br />
portable cleaning, <strong>DEMA</strong> can satisfy the requirement. Wash,<br />
rinse, and sanitize all from the same system.<br />
Model 606T Select-O-Matic: Ball valve actuated SprayClean<br />
that dispenses two chemical products and clear rinse.<br />
28-1QD and 292GQD<br />
Spray Gun and Foam Wand set<br />
(order items separately)<br />
• Stainless steel cover<br />
• Polypropylene injectors for chemical and hard water<br />
resistance<br />
• Brass internal components<br />
40-14QD/292QD<br />
Spray Gun and Foam Wand set<br />
44-89<br />
Constant pressure backflow<br />
preventer<br />
44-3N-25<br />
25 Feet (8 meters) nylon braided<br />
outlet hose<br />
44-3<br />
25 Feet (8 meters) black outlet hose<br />
44-3RG (shown)<br />
25 Feet (8 meters) red outlet hose<br />
44-3N-6<br />
6 Feet (2 meters) nylon braided<br />
water supply hose<br />
44-3-6 (shown)<br />
6 Feet (2 meters) black water<br />
supply hose<br />
44-4S<br />
Stainless steel hose bracket<br />
606T<br />
Mobile SprayClean<br />
Model 901-625RNF Mobile<br />
Cleaning System puts everything<br />
needed for portable cleaning<br />
on two wheels. Unit offers<br />
mobile foaming, rinsing and<br />
sanitizing for cleaning school<br />
showers, large kitchens, food<br />
processing plants and<br />
grocery store food preparation<br />
areas.<br />
• Two wheel cart with<br />
pneumatic tires and plastic<br />
frame (600 lb. capacity)<br />
• 625RNF SprayClean<br />
dispenser<br />
• 25 feet (8 meter) outlet<br />
hose and 6 feet (2 meter)<br />
water inlet hose<br />
• Hanger for both hoses<br />
• Spray gun and foam wand<br />
• Clip to hold detachable<br />
foam wand<br />
901-625RNF
FOAM DISPENSERS<br />
Compressed Air Foamers<br />
Model 294D mixes chemical solution with water and air<br />
to produce a dry, thick, clinging foam to any vertical or<br />
horizontal surface for cleaning large areas and areas that<br />
require a foam to penetrate for better cleaning results.<br />
The foam consistency is changed easily by adjusting either<br />
the air or water pressure. PVC body is designed to prevent<br />
hard water and chemical buildup to help produce consistent,<br />
long term cleaning results.<br />
Applications include:<br />
• food processing plants<br />
• truck and vehicle washing<br />
• bakeries<br />
• school shower areas<br />
• other industrial areas<br />
Model 294D<br />
PVC Compressed Air Foamer body with air inlet port, air<br />
adjustment gauge, water inlet connection and tubing for<br />
chemical supply. Simply hook up compressed air and water<br />
and adjust to produce desired foam. Metering tips determine<br />
the correct chemical dilution. Minimum recommended air<br />
and water pressure with 25 feet of hose is 40 psi.<br />
Model 93-18<br />
PVC Foam wand used with all <strong>DEMA</strong> compressed air foamers.<br />
<strong>Inc</strong>ludes water inlet coupling, ball valve for on/off control, and<br />
nozzle. Foam throw varies based on water and air pressure<br />
mixture. Average throw is 25 feet (8 meters).<br />
93-18<br />
Model 93-14<br />
25 feet 3/4" ID black water outlet hose. 3/4" ID hose is<br />
recommended to minimize back pressure put on foamer.<br />
MAXIMUM HOSE LENGTHS AND<br />
MINIMUM PRESSURES FOR GOOD FOAM<br />
HOSE SIZE AND LENGTH MINIMUM PRESSURES<br />
Water Air<br />
25 Feet (8 Meters) of 3/4" ID 40 PSI (2.7 Bar) 40 PSI<br />
50 Feet (15 Meters) of 3/4" ID 50 PSI (3.4 Bar) 40 PSI<br />
75 Feet (25 Meters) of 3/4" ID 60 PSI (4.1 Bar) 40 PSI<br />
20<br />
Portable Foaming and Spraying<br />
294D<br />
294DC<br />
Model 294DC<br />
Designed for applications that require a compressed air<br />
foamer enclosed in a stainless steel housing and ball valves<br />
for on/off control of water and air. Air pressure gauge is<br />
seen through front cover and easily adjusted while the<br />
unit is mounted. Metering tips determine the correct<br />
chemical dilution.<br />
Model 294DDM<br />
Drum Mounted version of 294D for easy attachment to<br />
55 gallon drum or tote container.<br />
294DDM<br />
Model 289<br />
Pro Foam hose end<br />
foamer and sprayer<br />
attaches to the end<br />
of any garden hose and<br />
produces a foam when<br />
the aerating wand is<br />
attached and sprays<br />
when the wand is<br />
removed.<br />
Quick disconnect allows<br />
spray gun to be easily<br />
removed from dispenser<br />
for clear water rinse.<br />
Ideal applications include<br />
supermarkets, food<br />
service areas, and<br />
shower rooms where<br />
portability is required.<br />
Unit includes a 32 ounce<br />
bottle and spray gun with<br />
quick disconnect fittings.<br />
289
21<br />
COMPRESSED AIR FOAM DISPENSERS<br />
FoamStation Dispensers<br />
FoamStation Mobile Dispensers<br />
FoamStation Dispensers are wall mounted or cart mounted<br />
compressed air foaming systems that use <strong>DEMA</strong>’s 294D PVC<br />
foamer body. Applications for these units include all food<br />
processing and food service areas, industrial plants, school<br />
shower areas, and other areas that require foaming chemicals<br />
to help clean.<br />
Units require an air compressor and at least 40 psi water<br />
pressure to produce quality foam.<br />
• PVC foamer body for chemical and hard water resistance<br />
• Polypropylene cover offers neat appearance<br />
• Stainless mounting plate for sturdy mounting<br />
• PVC manifold with slip together fit offers easy field<br />
maintenance<br />
• Metering tips determine dilution ratio<br />
Model 692T<br />
Two ball valves provide one foaming chemical and<br />
clear rinse from this wall or cart mounted unit.<br />
Model 693T<br />
Three ball valves provide one foaming chemical, clear<br />
rinse, and a sanitizer (or other chemical product) spray.<br />
The sanitizer product is run through <strong>DEMA</strong>’s P203CT<br />
injector that produces 2.7 gallons per minute<br />
(10.25 liters per minute) flow.<br />
Model 901-692T<br />
692T Dispenser mounted to mobile cart for portable foaming<br />
applications. Unit includes 6 feet (2 meter) water supply<br />
hose, 25 feet (8 meter) outlet hose, and foam wand assembly.<br />
Foam wand includes ball valve for on/off control at point<br />
of use.<br />
Model 901-693T<br />
693T Dispenser mounted to mobile cart for portable foaming<br />
applications where an additional sanitizer spray is required.<br />
Unit includes 6 feet (2 meter) water supply hose, 25 feet<br />
(8 meter) outlet hose, foam wand assembly and spray gun.<br />
Model 901-294DC<br />
294DC Dispenser mounted to mobile cart for portable foaming<br />
applications. Unit includes 6 feet (2 meter) water supply hose,<br />
25 feet (8 meter) outlet hose, and foam wand assembly. Foam<br />
wand includes ball for on/off control at point of use.<br />
NOTE:<br />
Air compressor is required at location of use for above units.<br />
Air compressor is not part of dispenser.<br />
Model 93-18<br />
PVC Foam wand with plastic ball valve can be used with any<br />
of <strong>DEMA</strong>’s compressed air foamers. Material allows it to be<br />
used with corrosive chemicals, including many acids.<br />
692T<br />
693T<br />
901-693T
MIXRITE PUMPS<br />
22<br />
MixRite Water Powered Proportioning Pump<br />
Chemical Shutoff<br />
• Uses only 20% of pressure to drive<br />
the pump<br />
• No electricity required<br />
• Low maintenance<br />
• Precise, reliable dosing regardless<br />
of changes in water flow or pressure<br />
• Easy to adjust<br />
• Fewer moving parts than<br />
competitive models<br />
• Piston seals easily replaced<br />
• No tools required for disassembly<br />
• Chemical cylinder is polyethylene<br />
571<br />
BYPASS<br />
(Models 576, 577, 578, 579)<br />
For corrosive and aggressive<br />
fluids that may damage internal<br />
pump parts. These models allow<br />
chemical to bypass main pump<br />
engine and are injected into the<br />
pump discharge line.<br />
SPECIFICATIONS:<br />
– Available with or without control<br />
valve that allows the shutoff<br />
of chemical while water is still<br />
flowing through the unit<br />
– Injection rate from .2% to 10%<br />
– Injection ratios from 1:500 to 1:10<br />
– Flows from .09 gpm to 11 gpm<br />
– Water pressure from 2.9 psi to 85 psi<br />
– Chemical resistant construction,<br />
Buna seals, and 302 stainless<br />
springs<br />
– Viton o-ring and hastelloy spring<br />
available for chemical check valve<br />
– Bypass models for harsh chemicals<br />
– <strong>Inc</strong>ludes 7 ft. inlet tubing and foot<br />
valve strainer<br />
– Dimensions are 19 1/2" high, 7" wide<br />
– Hose barbs with swivel for easy<br />
installation<br />
574<br />
578IN<br />
57-11-1 Tip Kit<br />
for Lean Dilution Ratios<br />
750:1<br />
1000:1<br />
1500:1<br />
2000:1<br />
<strong>Inc</strong>ludes 4 metering tips,<br />
8 ft. 1/4" vinyl hose and<br />
1/4"x3/8" barb adapter<br />
50-41-1 Strainer<br />
200 Mesh (80 Micron)<br />
Strainer<br />
recommended on all<br />
MixRite installations<br />
APPLICATIONS:<br />
• Vehicle Wash<br />
• Food and Beverage<br />
Sanitizing, Cleaning and<br />
Lubricating<br />
• Machine Tool Coolants<br />
and Metal Processing<br />
• Animal Medication<br />
• Foaming for Food Service<br />
Sanitation<br />
• Fertigation<br />
• Many other applications<br />
where applying liquid<br />
under pressure<br />
10 MixRite Models to meet your applications<br />
FLOW RANGE .09-11 GPM (.34-41.6 LPM)<br />
OPERATING TEMP. 37-122 F (4C-50 C) Note: Models 576 and 577 39F-104 F (4C-40C)<br />
MODEL PRESSURE INDUCTION OPTIONS<br />
Ratio Percent Oz/Gal Ml/Liter<br />
570 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .2% to 2% .25 to 2.5 2 to 20 * Tip Kit<br />
571 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .2% to 2% .25 to 2.5 2 to 20 Chemical On/Off * Tip Kit<br />
* Note: With Tip Kit 57-11-1 2000:1 to 750:1 .05% to .13% .06 to .17 .5 to 1.3<br />
572 2.9 - 85 PSI .19-5.8 BAR 250:1 to 25:1 .4% to 4% .51 to 5.0 4 to 40<br />
573 2.9 - 85 PSI .19-5.8 BAR 250:1 to 25:1 .4% to 4% .51 to 5.0 4 to 40 Chemical On/Off<br />
574 2.9 - 60 PSI .19-4.08 BAR 33:1 to 10:1 3% to 10% 3.8 to 12.8 3 to 100<br />
575 2.9 - 60 PSI .19-4.08 BAR 33:1 to 10:1 3% to 10% 3.8 to 12.8 3 to 100 Chemical On/Off<br />
BYPASS<br />
576IN 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .2% to 2% .25 to 2.5 2 to 20 * Tip Kit<br />
577IN 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .2% to 2% .25 to 2.5 2 to 20 Chemical On/Off * Tip Kit<br />
* Note: With Tip Kit 57-11-1 2000:1 to 750:1 .05% to .13% .06 to .17 .5 to 1.3<br />
578IN 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .4% to 4% .51 to 5.0 4 to 40<br />
579IN 2.9 - 85 PSI .19-5.8 BAR 500:1 to 50:1 .4% to 4% .51 to 5.0 4 to 40 Chemical On/Off<br />
INDUCTION RATIOS ARE BASED ON WATER THIN PRODUCTS<br />
(1CPS) HIGHER VISCOSITIES WILL AFFECT INDUCTIONS
23<br />
MIXRITE FOAMERS AND PANELS<br />
Wall and Cart Mounted Compressed<br />
Air Foam Systems<br />
MixRite Compressed Air Foam Systems allow any length of<br />
hose installed on the outlet of dispenser. The hose length or<br />
foam wand nozzle size have no affect on the foam quality,<br />
which makes these dispensers ideal for foaming applications<br />
utilizing long runs of hose or pipe.<br />
Wall Mounted Units<br />
570WS<br />
571WSR<br />
572WS<br />
573WSR<br />
573WSFR<br />
573WAFR<br />
576WBS<br />
577WBSR<br />
578WBS<br />
579WBSR<br />
579WBSFR<br />
579WBAF<br />
Spray unit, 2% induction<br />
Spray and Rinse unit, 2% induction<br />
Spray unit, 4% induction<br />
Spray and Rinse unit, 4% induction<br />
Spray, foam and Rinse unit, 4% induction<br />
Compressed Air Foam and Rinse unit, 4% induction<br />
Spray bypass unit, 2% induction<br />
Spray and Rinse bypass unit, 2% induction<br />
Spray bypass unit, 4% induction<br />
Spray and Rinse bypass unit, 4% induction<br />
Spray, Foam, and Rinse bypass unit, 4% induction<br />
Compressed Air Foam bypass unit, 4% induction<br />
Wall Mount Foam System<br />
Compressed Air Foam<br />
Systems that include<br />
MixRite, foam chamber,<br />
25' hose, and foam wand.<br />
(Wall mount spray systems<br />
also available).<br />
MixRite Panels<br />
Cart Mount Spray System<br />
Mobile Cleaning/Sanitizing<br />
Systems that include MixRite,<br />
25' hose and spray gun.<br />
(Mobile foam systems<br />
also available).<br />
MixRite Panel Systems<br />
Cart Mounted Units<br />
570CS<br />
571CSR<br />
572CS<br />
573CSR<br />
573CSFR<br />
573CAFR<br />
576CBS<br />
577CBSR<br />
578CBS<br />
579CBSR<br />
579CBSFR<br />
579CBAF<br />
Spray unit, 2% induction<br />
Spray and Rinse unit, 2% induction<br />
Spray unit, 4% induction<br />
Spray and Rinse unit, 4% induction<br />
Spray, foam and Rinse unit, 4% induction<br />
Compressed Air Foam and Rinse unit, 4% induction<br />
Spray bypass unit, 2% induction<br />
Spray and Rinse bypass unit, 2% induction<br />
Spray bypass unit, 4% induction<br />
Spray and Rinse bypass unit, 4% induction<br />
Spray, Foam, and Rinse bypass unit, 4% induction<br />
Compressed Air Foam bypass unit, 4% induction<br />
FLOW RANGE .09 - 11 GPM (.34 - 41.6 LPM) - OPERATING TEMP 37 - 122F (4 - 50C)<br />
MODEL PRESSURE INDUCTION # OF CHEMICALS FOAMING OPTIONS<br />
Ratio Percent<br />
570VFP-1 2.9 - 85 PSI .19 - 5.8 BAR 500:1 - 50:1 .2% - 2% 1 yes can be connected in series<br />
570VFP-2 2.9 - 85 PSI .19 - 5.8 BAR 500:1 - 50:1 .2% - 2% 2 yes<br />
570VFP-3 2.9 - 85 PSI .19 - 5.8 BAR 500:1 - 50:1 .2% - 2% 3 yes<br />
570VWP-1 2.9 - 85 PSI .19 - 5.8 BAR 500:1 - 50:1 .2% - 2% 1 no can be connected in series<br />
Vehicle Foaming Panels (VFP) include:<br />
• 570 MixRites<br />
• Inlet ball valve for strainer maintenance<br />
• 200 mesh strainer<br />
• 3/4" <strong>DEMA</strong> brass diaphragm valve (specify 24 VAC or 120 VAC)<br />
• One inlet ball valve per station for flow control<br />
• Outlet PVC check valve<br />
• Plexiglas panel<br />
• 1/2" stainless steel diaphragm valve and air regulator with pressure gauge<br />
570 VWP-1<br />
Vehicle Wash Panel (VWP) include:<br />
• Same as VFP less air regulator, gauge and valve
CHEMICAL INJECTORS<br />
Chemical Injectors<br />
<strong>DEMA</strong> manufactures two different types of injectors, each<br />
having their own way to control water flow. The C series<br />
injectors use one of three different water nozzle bushings to<br />
control water flow and the B series use an external bypass<br />
knob for controlling water flow. Injectors are available from<br />
1/8” NPT up to 1” NPT. (BSP threaded injectors available).<br />
When choosing an injector it is important to size the injector<br />
according to the application’s water flow, not pipe size.<br />
Injector metering knobs can be supplied with a metering<br />
tip option (example 204CT) or metering screw option<br />
(example 204C).<br />
FOR DETAILED INFORMATION ON <strong>DEMA</strong>’S B AND C SERIES<br />
INJECTORS AND SELECTION TABLES REQUEST CATALOG<br />
2005IND OR VISIT OUR WEB SITE AT WWW.<strong>DEMA</strong>ENG.COM.<br />
SprayClean Injectors<br />
SprayClean Injectors do not include covers, ball valves, or<br />
any other device to make them a complete system. These<br />
units include the injector assembly, appropriate spray gun for<br />
each model and the chemical inlet tubing assembly. These<br />
are very basic units that may be wall or drum mounted to<br />
dispense one chemical.<br />
Model 244C Three-position gun allows user to choose chemical,<br />
clear water rinse, and off setting at the spray gun. When<br />
gun trigger is pulled completely, vacuum is drawn in injector<br />
and chemical is dispensed through spray gun. Releasing the<br />
trigger halfway to rest against a latch will eliminate vacuum<br />
draw of chemical and only spray clear water for rinsing.<br />
24<br />
204C<br />
Special Injectors<br />
204B<br />
Model 201CHT<br />
1/8” brass injector designed to draw up to 1-1 ratio at 1/2<br />
gallon per minute (2 liters per minute) flow. Ideal for mixture<br />
of antifreeze and water for windshield washer filling.<br />
<strong>DEMA</strong> OFFERS SEVERAL PLASTIC AND STAINLESS STEEL<br />
INJECTORS FOR CORROSIVE APPLICATIONS.<br />
Model P203C or P203CT:<br />
3/8” polypropylene plastic injector with flow rate of<br />
4 GPM at 40 psi (16 liters per minute at 2.75 bar)<br />
Model 203BS-2 or 203BST-2:<br />
3/8” stainless steel injector with flow rate range of<br />
3 to 9 GPM at 40 psi (12 to 36 liters per minute at 2.75 bar)<br />
244C<br />
Model 244BC Slide valve on chemical injector allows user to<br />
choose between wash and rinse setting. Squeezing the spray<br />
gun fully open turns the unit on and dispenses either the<br />
chemical or clear rinse, depending on slide valve setting.<br />
(This model allows for a harder spray when rinsing compared<br />
to the 244C model).<br />
Model 244CDM<br />
Drum Mount Model of 244C<br />
Model 244BCDM<br />
Drum Mount Model of 244BC<br />
P203C<br />
203BS-2
25<br />
APPROVALS<br />
<strong>DEMA</strong> Engineering Co.<br />
ISO 9001:2000 Certified<br />
Action Gap Backflow Preventer<br />
ASSE 1055-1997<br />
IAPMO<br />
CSA<br />
Various U.S. states and cities<br />
Australia<br />
Ultra Gap Air Gap Proportioner<br />
ASSE 1055-1997<br />
IAPMO<br />
CSA<br />
Various U.S. states and cities<br />
KIWA-Netherlands<br />
Australia<br />
DVGW-Germany<br />
WRC-United Kingdom<br />
Model 153 and 154<br />
ASSE 1055-97<br />
633 Valve Body<br />
NSF-61<br />
58-1 Siphon Breaker<br />
ASSE 1001<br />
<strong>DEMA</strong>Master Dishwash Series<br />
CSA<br />
TITAN Dishwash<br />
CE, CSA<br />
ATLAS Laundry<br />
CE, CSA<br />
METRIC CONVERSIONS<br />
METRIC CONVERSIONS<br />
To go from Multiply by To get<br />
Gallons 3.785 Liters<br />
Ounces 29.57 Milliliters<br />
PSI 0.068 Bar<br />
<strong>Inc</strong>hes 25.4 Millimeters<br />
Fahrenheit 5/9(F-32) Celsius<br />
Liters 0.2642 Gallons<br />
Milliliters 0.34 Ounces<br />
Bar 14.5 PSI<br />
Millimeters 0.0394 <strong>Inc</strong>hes<br />
Celsius 9/5C+32 Fahrenheit
<strong>DEMA</strong><br />
R<br />
<strong>DEMA</strong> Engineering Company<br />
10020 Big Bend Boulevard<br />
St. Louis, Missouri 63122<br />
Telephone: 800-325-3362<br />
Fax: 314-965-8319<br />
Website: www.demaeng.com<br />
<strong>DEMA</strong> Europe LLC<br />
Mast 25, 3891 KE<br />
Zeewolde, Netherlands<br />
Telephone: 31- (0)-36-522-7006<br />
Fax: 31-(0)-36-522-7863<br />
Website: www.demaeurope.com<br />
<strong>DEMA</strong> Australia<br />
Unit 5, 7-11 Parraweena Road<br />
Caringbah N.S.W. 2229<br />
Sydney, Australia<br />
Telephone: 61-2-9525-5177<br />
Fax: 61-2-9525-5033<br />
E-Mail: sales@demaust.com<br />
<strong>DEMA</strong> China Representative Office<br />
Room 1317, SIPAI Plaza<br />
103 Cao Bao Road<br />
Shanghai, 200233 P.R. China<br />
Telephone: 86 21-5424 6629<br />
Fax: 86 21 6464 1721<br />
E-Mail: johnzhu@demachina.com.cn<br />
<strong>DEMA</strong> Latin America Sistemas de Dosagem Ltda<br />
Rua Andre Ampere, 153 Cj. 67<br />
Edificio Terra Brasilis<br />
CEP 04562-080 Brooklin Sao Paulo Brazil<br />
Telephone/fax: (5511) 3596-3477<br />
Mobile: (5511) 8579-3477<br />
E-Mail: omarpuras@uol.com.br<br />
<strong>Cat</strong>alog 2007 DISP