Embedded Power AC-DC and DC-DC Power Conversion ... - Codico

Bulk Power
HPR12K
Output
Output rating
Set point
Total regulation range
Rated load
Minimum load
Output noise
Output voltage overshoot
Transient response
Max units in parallel
Short circuit protection
Output isolation
Forced load sharing
Overcurrent protection
(OCP)
Overvoltage protection
(OVP)
Overtemperature
protection
48 V @ 62.0 A (180-264 Vac)
5 Vsb @ 3.0 A
48 V @ 29.4 A (90-140 Vac)
5 V @ 3 A
-4% to +17% through I 2 C
48 V ±10%; 5 Vsb ±4% (line/load/transient when
measured at output connection)
3000 W maximum @ 200 Vac Input
1500 W maximum @ 110 Vac Input
(no derating over operating temperature range)
48 V @ 0.0 A; 5 Vsb @ 0.0 A with no loss
of regulation
480 mV max P-P for 48 V output
100 mV max P-P for 5 Vsb output
Measured with a 0.1μF Ceramic and 10 μF
Tantalum capacitor on any input
±5% maximum of nominal voltage setting
5% maximum deviation
(50% load step @ 1 A/us. Step load valid
between 10-100% of output rating)
Up to 4 (total power in 1U 19” rack is 12 KW)
120-130% of rated output (output to return)
Per POE specs (>2000 Vac)
Within 10% of all shared outputs
(digital sharing control)
120-130% for 48 V output
100-125% for 5 Vsb output
110-120% for 48 V output
110-125% for 5 Vsb output
10 °C to 15 °C above safe operating area.
(Both PFC and output converter monitored.
5 Vsb will operate under overtemperature
condition. Built-in hysteresis.)
Rack Ordering Information
Module UFE1300/2000 HPS3000
Rack # UFR6000 HPR12K
# of Slots 3 4
Total Power 6000 W 12000 W
**See website for option codes on HPR racks.
Ordering Information
HPS3000-0-001
HPS3000
HPS3000-0-001
HPS3000-9
42 For complete product specifications, technical reference notes and available product options, go to www.Emerson.com/EmbeddedPower.