Model 200 - Best Graphics Group

Mo d e l 200
DIE CUTTING MACHINE
Tomorrow’s Cutting Edge Solutions, Today
Versatile
Precise
Dependable
Quality
Productive
The PMC Model 200 Die Cutting Machine
revolutionized the production of high volume
accurate labels. With a variable speed electronic
drive and a trouble-free mechanical disappearing
shuttle, the Model 200 doubles the production of
ordinary die cutting machines. The Model 200 can
be used as a stand-alone manual machine or in
conjunction with a Bander, Feed Table or Strip Cutter
to form an automated production line.

Mo d e l 200
DIE CUTTING MACHINE
Four-sided guiding system jogs and holds the stacks on all four sides during
the cutting operation for precise die cutting.
Disappearing shuttle doubles production of ordinary die cutting machines,
with no loading time delays.
Fastest set-up and die change-over in the industry — Convenient adjustment
of die and guides with clear view of die register on labels, speeds set-up
and reduces waste.
Versatile as a stand-alone manual machine, or as part of an automated line including a
PMC Bander, Feed Table or Strip Cutter.
Typical uses: labels, note pads, credit cards, identification tags, post cards, game cards,
3-way trim, round cornering.
Typical Materials: paper, plastic, vinyl, Mylar, paperboard.
112cm (44”)
Electric Panel
114cm (45”)
Infeed
*Layout shown for Model 200 (7”x8”)
Specifications: model 200
Specifications Model 200* Model 200-912 Model 200-917
Maximum Pre-cut Size 184mm x 210mm (7.25”x8.25”) 235mm x 311mm (9.25”x12.25”) 235mm x 438mm (9.25”x 17.25”)
Minimum Pre-cut Size 32mm x 57mm (1.25”x2.25”) 57mm x 83mm (2.25”x3.25”) 83mm x 159mm (3.25”x 6.25”)
Maximum Die Cut Size 178mm x 203mm (7”x8”) 229mm x 305mm (9”x12”) 229mm x 432mm (9”x 17”)
Minimum Die Cut Size 25mm x 51mm (1”x2”) 51mm x 76mm (2”x3”) 76mm x 152mm (3”x 6”)
Recommended Trim 3mm (1/8”) all sides 3mm (1/8”) all sides 3mm (1/8”) all sides
Stack Height Up to 102mm (4”) Up to 102mm (4”) Up to 102mm (4”)
Cycles per Minute Variable 5-20 Variable 5-18 Variable 5-18
Electric Requirements 5hp, 3.5 KVA, 3-phase 5hp, 3.5 KVA, 3-phase 5hp, 3.5 KVA, 3-phase
Tomorrow’s Cutting Edge Solutions, Today
PMC Printing Machinery Company
7234 Blue Ash Road • Cincinnati, Ohio 45236 USA
+1 (513) 891-9004 • fa x +1 (513) 891-0449
www.pmcworldwide.net
PMC 200 605