For the models FX4 / FX5 / FX6 / RF1 - Rewaco Spezialfahrzeuge ...

Driving 11
Starting the engine
Before starting the engine, put the gearbox into idle. While
starting, press down the clutch and press the starter button
for the starting motor. As soon as the engine starts, release
the starter button. Do not let the engine run warm while
standing, drive off immediately.
! Be careful when starting the engine in closed rooms -
danger of poisoning
Cold start
Start engine without operating the accelerator grip. The
engine is managed by a Motor Management feature.
Parking the vehicle
When parking the vehicle on a sloping road, you must apply
the parking brake and put the vehicle into first gear.
! Attention! When the catalyser is hot, do not park the
vehicle on an inflammable surface - fire danger!
Starting with manual gearshift
R
1 3
2 4
1 3
2 4
Gear shift scheme:
FX4 / FX5 / FX6
5
R
Gear shift scheme: RF1
With models
FX4 / FX5 and
FX6 please lift the
locking catch to
shift into reverse
gear.
Your vehicle is equipped with a mechanical
gearshift with 4 or 5 forward gears
and one reverse gear.
You must press down on the clutch
before engaging the gears.
Adjust engine output so that the front tyre
does not rise in the air when driving off,
as the vehicle cannot be steered in this
state.