Pneumatic Assembly Tools - Apex Tool Group

32
Swingbar Nutrunners
Smaller, Faster, Lighter
For high torque applications where a small tool is
necessary, for consistency in clamp load across
joint types or for simply eliminating the maintenance
needs of an angle tool, the Cleco 64 Series provides
the best solution for today’s heavy assembly
environment.
Benefits of a Swingbar Tool
A swingbar tool includes a reaction bar that freely
swings 360˚. This allows the reaction bar to be
moved to an appropriate bracing point without any
disassembly or repositioning of a spline. Once
positioned, the reaction bar absorbs the reaction
forces of the tool.
Selectork
Output torque from a stall tool is achieved by
adjusting the air pressure to the tool. If the tool is
improved
ergonomics
Top and bottom
air inlets help
customize the 64
Series Reaction
Bar Nutrunners to
the operator’s work
area.
improved
ergonomics
Comfort molded
handles and lighter
weights reduce
operator fatigue and
improve productivity
moved from location to location or if other tools
requiring full line pressure use the same air line, the
tool will require a dedicated air pressure regulator.
The Cleco Selectork feature in the 64 Series tools is
a small pressure regulator that takes the place of the
standard air inlet bushing and eliminates the need to
have a separate pressure regulator installed in the
plant floor system. Because of the small size of the
Selectork there is a limited pressure adjustment range
of from 60 to 90 psi. To order this option on the
Cleco 64TTS Swingbar tools replace the “S” in the
model number with a “K” (64TTS….to a 64TTK….).
Reversible
A simple to use and convenient slide reverse lever improves productivity
by allowing for the loosening of fasteners without changing tools.
Selectork
for optimal intool
air pressure
regulation.
Selectork
ergonomics
Infinite-position reaction bar can
quickly be moved to an appropriate
brace point, eliminating reaction forces
of the rundown.