Betriebsanleitung Operating Instructions - PC-Topp - Neugebauer ...
Betriebsanleitung Operating Instructions - PC-Topp - Neugebauer ...
Betriebsanleitung Operating Instructions - PC-Topp - Neugebauer ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
N 214<br />
48<br />
96<br />
109<br />
6.1 Dimensions<br />
36 www.baumer.com<br />
123.75<br />
19.75 1-10<br />
6.2 Factory settings<br />
The following parameters are programmed by the factory, prior to<br />
delivery:<br />
Start count value 0<br />
Scaling factor 1.0000<br />
Display No decimal point<br />
Pulse signal time, min counter 0.25 s<br />
Counter inputs Track A and up/down on track B<br />
Counting frequency 10 kHz<br />
6.3 Error messages<br />
Error messages Err 1 and Err 2: Fault must be rectified by the factory.<br />
Err 6: Excessively fast sequences, e.g. inadequate intervals<br />
between presets at high counting frequency.<br />
7 Part number<br />
N 214. AX01<br />
Voltage supply<br />
1 24 / 48 VAC<br />
2 115 / 230 VAC<br />
3 24 VDC<br />
Relay<br />
0 Without relay<br />
1 Relay and optocoupler outputs<br />
Interfaces<br />
0 Without interface<br />
1 RS485<br />
2 RS422<br />
3 RS232<br />
7
Change language