Fluxana certified reference materials - AfriFusion
Fluxana certified reference materials - AfriFusion
Fluxana certified reference materials - AfriFusion
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pellet Dies<br />
Evacuable Pellet Die<br />
FLUXANA GmbH & Co. KG | Sommerdeich 22 | D-47533 Kleve | Germany<br />
Tel.: +49 (0) 2821 97 38 75 | Fax: +49 (0) 2821 97 38 76 | E-mail: info@fl uxana.de | Web: www.fl uxana.com<br />
Solid analysis 3<br />
Pellet Dies 3.1.1<br />
The Dies are designed for use with our Hydraulic Presses.<br />
Halide disks for infrared analysis are usually produced with the smaller size dies.<br />
The larger size dies are commonly used in briquetting samples for XRF and XRD<br />
analysis and many other industrial applications.<br />
All of the dies are equipped with nitrile O-ring seals and 2 pellets in between the sample is pressed.<br />
There is a wide range of 440C hardened stainless steel Evacuable Pellet Dies,<br />
used for compacting powdered samples into disks or briquettes.<br />
Part No. Description Diameter of pellets<br />
produced<br />
PR-L33000 Evacuable pellet die 13mm<br />
PR-CD-6008 Die with 2 pellets and piston 8mm<br />
PR-CD-6012 Die with 2 pellets and piston 12mm<br />
PR-CD-6016 Die with 2 pellets and piston 16mm<br />
PR-CD-6020 Die with 2 pellets and piston 20mm<br />
PR-CD-6024 Die with 2 pellets and piston 24mm<br />
PR-CD-6027 Die with 2 pellets and piston 27mm<br />
PR-CD-6032 Die with 2 pellets and piston 32mm<br />
PR-CD-6032R** Die with 2 pellets, piston and stamp out tool<br />
Pressed samples of 32mm in a ring with a OD of 40mm<br />
32mm<br />
PR-CD-6040 Die with 2 pellets and piston 40mm<br />
PR-SSP-61xx* Spare pellets xx<br />
We offer nearly every diameter. Please ask for a quotation.<br />
* Please choose the needed size<br />
** For the ring please have a look at part no. PR-CD-6032RingM (page 18 )<br />
Filling tool for boric acid pellets<br />
Part No. Description<br />
PR-CD-BA32 Filling tool boric acid 32<br />
PR-CD-BA40 Filling tool boric acid 40<br />
Especially for low quantities of samples a boric acid<br />
backing might be a solution.<br />
To place the sample in the center we offer a special<br />
tool to pour the sample into the die.<br />
A piston helps to press before filling the boric acid on top.<br />
17