Cylindrical Roller Bearings - Norfolkbearings.com

Cylindrical Roller Bearings
MOJ & MOX Style Cylindrical Roller Bearings
Economical MOJ and MOX roller roller bearings operate operate in a
in very a very little space limited and space are easily and are assembled easily assembled and disassembled
disassembled for servicing. for The servicing. rollers run The directly rollers on run the
and
directly hardened on and the ground hardened surfaces and ground of the shaft surfaces and housing of the
shaft whichand muchousing, have a which hardness much of Rockwell have a hardness C58-64 and of
Rockwell surface finish C58-64 no greater and surface than 18finish AA tono perform greater than their
18 maximum AA to perform capacity. at Any their deviation maximum will capacity. result in Any a
deviation reduced load will rating result which in a reduced should beload discussed rating with which the
should NTN Application be discussed Engineering with Department. the NTN Application
Engineering Department.
MOJ and MOX bearings consist of the same roller complement
and composite steel cage components used in
MOJ and MOX bearings consist of the same roller
complement and composite steel cage components
the “M” or “W” series bearings.
used in the “M” or “W” series bearings.
A part number listing, load ratings, and and dimensions are
are shown shown on the on next the page. following For availability pages. For andavailability
additional
and information additional contact information NTN sales. contact NTN sales.
The final drive planetary in this rubber tired earth
The final drive planetary in this rubber tired earth mover
mover wheel is an ideal application for MOJ or
wheel is an ideal application for MOJ or MOX bearings
MOX bearings, which must resist shock and carry
which must resist shock and carry very heavy radial
very heavy radial loads at low speed.
loads at low speed.
MOJ
MOX
72