Intrinsyc Software, Inc.CerfBoard - MontaVista

Chapter 2: Installation
Remove Preview Kit for Pro 2.1
Remove Preview Kit for Pro 2.1
If you would like to remove your installation of Preview Kit for Pro 2.1, you need to
use the install_previewkit script to remove it.
Note: For removals, the Preview Kit for Pro 2.1 CD-ROM is NOT REQUIRED to be
available. (If you installed in a location other than the default, replace /opt in the
path below with the directory you used.)
1. To remove all of Preview Kit for Pro 2.1, enter the command:
/opt/hardhat/previewkit/install_previewkit --uninstall
• To remove Preview Kit for Pro 2.1 from the default location
(/opt), press the Enter key.
Welcome to the MontaVista Linux Preview Kit Uninstall!
Where is the Preview Kit installed? [ /opt ]
• To remove Preview Kit for Pro 2.1 from an alternate location, enter
the name of the alternate path, for example:
Where is the Preview Kit installed? [ /opt ] /group1
In the above example, Preview Kit for Pro 2.1 is removed from the
following directory: /group1/hardhat/previewkit.
2. To choose an LSP to remove, enter the appropriate number.
For example, if you were to remove the Generic x86 LSP, you would
enter the number 1, for example:
Architecture Linux Support Package
------------ ---------------------
1. x86_586 Generic X86
Choose the Target Architecture (by number): 1
3. When prompted to confirm that the LSP you chose to remove is correct,
enter y to confirm. If the LSP name that appears is not correct, enter n to
decline.
MontaVista Linux® Preview Kit for Professional Edition 2.1 9