bellow sealed valves - Federal International (2000) Ltd

FORGED STEEL CHECK VALVES
NOTE: Intergral Flanged Ends: Class 150#, 300# & 600# (RB). Welded on Flanged Ends : Class 150#, 300#, 600# & 1500# (RB & FB)
FLANGED CHECK VALVE (STANDARD)
CLASS DIMENSION
1/2 3/4 1 1-1/4 1-1/2 2
mm in mm in mm in mm in mm in mm in
Face
to
Piston or Ball 108 4.25 117 4.6 127 5 140 5.5 165 6.5 203 8
Face Swing
Same as Piston or Ball Check Valve
150 Center to Top 46 1.81 56 2.2 65.5 2.58 74.6 2.94 74.6 2.94 100.5 3.96
Port Dia. 9.5 0.37 12.7 0.5 17.5 0.69 24 0.94 29.5 1.16 35 1.38
Wt (kg/Ib) 1.7 3.7 2.4 5.3 3.8 8.3 7.7 17 7.7 17 11.4 25.1
Fig No.
Face
to
Piston or Ball 152 6 178 7 203 8
B1**R
216 8.4 229 9 267 10.5
Face Swing 178 7 203 8 216 8.5 229 9 241 9.5 267 10.5
300 Center to Top 46 1.81 56 2.2 65.5 2.58 74.6 2.94 74.6 2.94 100.5 3.96
Port Dia. 9.5 0.37 12.7 0.5 17.5 0.69 24 0.94 29.5 1.16 35 1.38
Wt (kg/Ib) 2.2 4.9 3.3 7.3 5.1 11.2 9.9 21.8 9.9 21.8 12.9 28.4
Fig No.
B3**R
Face
to
Piston or Ball 165 6.5 190 7.5 216 8.4 229 9 241 9.5 292 11.5
Face Swing
Same as Piston or Ball Check Valve
600 Center to Top 46 1.81 56 2.2 65.5 2.58 74.6 2.94 74.6 2.94 100.5 3.96
Port Dia. 9.5 0.37 12.7 0.5 17.5 0.69 24 0.94 29.5 1.16 35 1.38
Wt (kg/Ib) 2.5 5.5 3.9 8.6 5.7 12.6 111.2 24.7 11.2 24.7 13.8 30.4
Fig No.
B6**R
Face
to
Piston or Ball 216 8.5 229 9 254 10 279 11 305 12 368 14.5
Face Swing 97 3.82 97 3.82 137 5.4 157 6.18 157 6.18 157 6.18
1500 Center to Top 150 5.91 179 7.05 231 9.09 256 10.08 256 10.08 301 11.85
Port Dia. 9.5 0.37 12.7 0.5 16 0.63 22 0.87 27 1.06 34.2 1.38
Wt (kg/Ib) 5 11 7 15.4 18.7 41.2 29.2 64.4 28.2 62.2 34.2 75.4
Fig No.
B15**R
*Fig. No. 3rd or 4th character refer to page 3.
15