SSANGYONG - Tiger-Tools Kft.

Technical Data
Technical Data
INDUSTRIAL CERAMIC
INDUSTRIAL CERAMIC
Technical Data
Properties of Fine Ceramics
DENSITY(g/cm 3 ) HARDNESS(kg/mm 2 )
Technical Data
MACHINING PARTS
Fine Ceramics with their electrical insulation and non-magnetic
properties are being utilized as wire-cutting machine parts of the
electric discharge machine and XY-table parts which require
precision.
CERAMIC FAUCET DISCS
Ceramic faucet discs from Al2O3 which have excellent wearresistance
and non-stick properties are being widely utilized in
domestic faucet industry. And its physical properties are as follows.
Surface bearing area is 6515%. Parallelism is lower than 0.05mm.
Flatness is lower than 0.6. Ra-value is lower than 0.3.
BENDING STRENGTH(kg/cm 3 ) TOUGHNESS(MN/m 3/2 )
PUMP PARTS
Fine Ceramics are being successfully utilized as pump parts-shafts,
plungers and sleeves. They can be also used in ball parts of pump
which require excellent spherical shape and wear-resistance.
TEXTILE PARTS
Ceramic cutters made from zirconia ceramics which have excellent
wear-resistance and corrosion-resistance, are being widely utilized in
the domestic textile industry. Yarn guide made from Al2O3 ceramics
are also being produced.
YOUNGS MODULS(10 6 kg/cm 2 ) HIGH TEMPERATURE STRENGTH(kg/cm 2 )
D
GRINDING MEDIA BALL/TILE
Grinding ball and wear resistant tile, which are made by accumulated
Al2O3 technology and the newest equipment, are proud of their high
wear resistance and long life, and are very suitable for
grinding/dispersion mill. Also, various dimensions meet the need of
users.
CHEMICAL PARTS
In the high quality ceramic parts for chemistry, through the carefully
selected raw materials and the strictly controlled processes, several
high temperature anti-corrosive parts for sintering and heat treatment
including analytical crucibles are being produced and supplied.
D
12
13